"$$$/AEScart/category_name/ALL=All"
"$$$/AEScart/category_name/BED=Beds"
"$$$/AEScart/category_name/BIT=Sound Bits"
"$$$/AEScart/category_name/COM=Commericals"
"$$$/AEScart/category_name/CON=Contests"
"$$$/AEScart/category_name/DAY=Daily Play Lists"
"$$$/AEScart/category_name/EB=Emergency Broadcast"
"$$$/AEScart/category_name/EFX=Sound Effects"
"$$$/AEScart/category_name/FIL=Fillers"
"$$$/AEScart/category_name/ID=Station ID"
"$$$/AEScart/category_name/INT=Intros"
"$$$/AEScart/category_name/JIN=Jingles"
"$$$/AEScart/category_name/LIN=Liners"
"$$$/AEScart/category_name/LOG=Logos"
"$$$/AEScart/category_name/MAG=Magic Call"
"$$$/AEScart/category_name/MUS=Music"
"$$$/AEScart/category_name/NET=Network Delay"
"$$$/AEScart/category_name/NEW=News"
"$$$/AEScart/category_name/PRO=Promos"
"$$$/AEScart/category_name/PSA=Public Service Announcements"
"$$$/AEScart/category_name/SEG=Segues"
"$$$/AEScart/category_name/SHW=Shows"
"$$$/AEScart/category_name/SPO=Spots"
"$$$/AEScart/category_name/SPR=Sports"
"$$$/AEScart/category_name/STG=Stagers"
"$$$/AEScart/category_name/STK=Announcer Stack"
"$$$/AEScart/category_name/SWP=Sweeps"
"$$$/AEScart/category_name/TMP=Temporary"
"$$$/AEScart/category_name/TST=Test Tones"
"$$$/AEScart/descriptions/AESCartChunk=Radio Traffic Data"
"$$$/AEScart/descriptions/Artist=An ASCII string, 64-characters or less, holding the artist or creator name for the audio cut."
"$$$/AEScart/descriptions/CartTimer=A structure for representing time marks in the AES Cart Chunk within Waveform Audio files."
"$$$/AEScart/descriptions/Category=Category ID, PSA, NEWS, etc"
"$$$/AEScart/descriptions/Classification=An ASCII string, 64-characters or less, holding a classification key. This key can be used for general classification, selection or sorting based on language, locale or other similar applications."
"$$$/AEScart/descriptions/ClientID=An ASCII string, 64-characters or less, holding a client or customer identification or name."
"$$$/AEScart/descriptions/CutID=An ASCII string, 64-characters or less, representing the cut number, or unique cut key. The string shall be left justified. Some consumer systems can have restricted cut number lengths or allowable character set. These applications should provide some means of synthesizing a usable cut identifier if it has such restrictions."
"$$$/AEScart/descriptions/EndDate=As in start date, but shall indicate the date after which the sequence will no longer be active. If the sequence is to run forever, the date shall be 9999-12-31. There shall be no default for this field."
"$$$/AEScart/descriptions/EndTime=This code shall indicate the time of day on the appointed end date after which the sequence becomes inactive. If blank, applications shall assume an end time of 23:59:59."
"$$$/AEScart/descriptions/LevelReference=Sample value for 0 dB reference"
"$$$/AEScart/descriptions/OutCue=An ASCII string, 64-characters or less, holding the optional out cue phrase to be displayed when the cut is being played. This shall be a user readable cue string."
"$$$/AEScart/descriptions/PostTimer=Eight Timer structures representing time marks. The time units are in sample periods at the sampling frequency of the associated audio data and are be referenced to the first sample of the audio data. Each timer entry also consists of a FOURCC timer usage identifier."
"$$$/AEScart/descriptions/ProducerAppID=An ASCII string, 64 characters or less, containing the vendor name, product name or both of the program or application that produced the WAVE file with this cart chunk."
"$$$/AEScart/descriptions/ProducerAppVersion=An ASCII string, 64 characters or less, containing the version of the program or applications that produced the WAVE file containing the cart chunk. Because this string is informational only, the application may represent the version in any convenient format."
"$$$/AEScart/descriptions/StartDate=An ASCII date string, 10 characters, of the form YYYY-MM-DD, such as 1998-12-25, holding the start date. Year (YYYY) shall be defined as 0000 to 9999. Month (MM) shall be defined as 01 to 12. Day (DD) shall be defined as 01 to 28, 29, 30 or 31 as applicable. The separator between date fields shall be a hyphen, (-). Note: This format complies with ISO 8601 and is compatible with other dates in BWF files. To signify an immediate start date, applications shall use 1900-01-01."
"$$$/AEScart/descriptions/StartTime=An ASCII time string, 8 characters, of the form hh:mm:ss, such as 12:31:45, representing the 24-hour time-of-day for the start time on the assigned StartDate. Hour (hh) shall be defined as 00 to 23. Minutes (mm) and seconds (ss) shall be defined as 00 to 59. The separator between time fields shall be a colon, (:).If blank, applications shall assume a start time of 00:00:00."
"$$$/AEScart/descriptions/TagText=Non-restricted ASCII characters containing a collection of strings each terminated by <CR><LF>. This text may be system- or user- defined descriptive text for the sound, such as live tag, script information, descriptive text special instructions, and so on."
"$$$/AEScart/descriptions/Title=An ASCII string, 64-characters or less, representing the title of the cut. The title should be a descriptive summary of the audio contents of the file, and may be used as an entry into a table of contents, and so on. Applications that do not support a 64-character title may truncate the field as needed."
"$$$/AEScart/descriptions/URL=An ASCII string, 1024-characters or less, representing a universal resource locator (URL) referencing or referenced by the audio program. The URL field contents should conform to URL syntax"
"$$$/AEScart/descriptions/Usage=A FOURCC usage identifier for this timer."
"$$$/AEScart/descriptions/UserDef=An ASCII string, 64 characters or less, whose use and contents may be defined by the user of the system."
"$$$/AEScart/descriptions/Value=The audio sample offset of this timer."
"$$$/AEScart/descriptions/Version=A 4-character ASCII numeric string giving the version of the cart data structure, particularly the contents and usage of the reserved area. The first two numbers shall give the major release level (with leading 0) from 00 to 99 and the last two shall give the revision level (with leading 0) in the range of 00 to 99."
"$$$/AEScart/labels/AESCartChunk=AES CART"
"$$$/AEScart/labels/Artist=Artist"
"$$$/AEScart/labels/CartTimer=Timer"
"$$$/AEScart/labels/Category=Category"
"$$$/AEScart/labels/Classification=Classification"
"$$$/AEScart/labels/ClientID=Client ID"
"$$$/AEScart/labels/CutID=Cut ID"
"$$$/AEScart/labels/EndDate=End Date"
"$$$/AEScart/labels/EndTime=End Time"
"$$$/AEScart/labels/LevelReference=0 dB Reference Level"
"$$$/AEScart/labels/OutCue=Out Cue"
"$$$/AEScart/labels/PostTimer=Post Timer"
"$$$/AEScart/labels/ProducerAppID=Producer App ID"
"$$$/AEScart/labels/ProducerAppVersion=Producer App Version"
"$$$/AEScart/labels/StartDate=Start Date"
"$$$/AEScart/labels/StartTime=Start Time"
"$$$/AEScart/labels/TagText=Tag Text"
"$$$/AEScart/labels/Title=Title"
"$$$/AEScart/labels/URL=URL"
"$$$/AEScart/labels/Usage=Usage"
"$$$/AEScart/labels/UserDef=User Defined Text"
"$$$/AEScart/labels/Value=Value"
"$$$/AEScart/labels/Version=Version"
"$$$/ASIOClassDriverPrefsPage/Samples=采样"
"$$$/ASIOPrefsXML/Device=设置默认的设备"
"$$$/ASIOPrefsXML/SampleRate=设置设备的采样率"
"$$$/ASIOPrefsXML/Settings=打开外部硬件设置对话框"
"$$$/AUI/AboutBox/PatentAndLegalNoticesDialogTitle=法律声明"
"$$$/AboutBoxXML/CopyrightInfo=版权所有 © 1992-2012 Adobe Systems Incorporated 及其许可方。#{endl}保留所有权利。#{endl}#{endl}http://www.adobe.com/cn"
"$$$/AboutBoxXML/PatentAndLegalNoticeButton=法律声明"
"$$$/AdaptiveNoise/BroadbandPreservation=宽频保留:"
"$$$/AdaptiveNoise/FFTSize=FFT 大小:"
"$$$/AdaptiveNoise/FineTuneNoiseFloor=微调噪声基准:"
"$$$/AdaptiveNoise/HighQualityMode=高品质模式(慢)"
"$$$/AdaptiveNoise/Noisiness=噪声量:"
"$$$/AdaptiveNoise/ReduceNoiseBy=降噪依据:"
"$$$/AdaptiveNoise/SignalThreshold=信号阈值:"
"$$$/AdaptiveNoise/SpectralDecayRate=频谱衰减率:"
"$$$/AlignSpeechDialog/AddNewClip=Add aligned clip to new track"
"$$$/AlignSpeechDialog/AlignmentLabell=Alignment:"
"$$$/AlignSpeechDialog/AlignmentNormal=Balanced alignment and stretching"
"$$$/AlignSpeechDialog/AlignmentSmooth=Smoothest stretching"
"$$$/AlignSpeechDialog/AlignmentTight=Tightest alignment"
"$$$/AlignSpeechDialog/Cancel=Cancel"
"$$$/AlignSpeechDialog/NoisyClip=Reference clip is noisy"
"$$$/AlignSpeechDialog/Ok=OK"
"$$$/AlignSpeechDialog/ReferenceChannel=Reference Channel:"
"$$$/AlignSpeechDialog/Source=Reference:"
"$$$/AlignSpeechDialog/SourceClip=Reference Clip:"
"$$$/AlignSpeechDialog/Target=Unaligned:"
"$$$/AlignSpeechDialog/TargetClip=Unaligned Clip:"
"$$$/AmioAIFF/FormatOptionsXML/ByteOrderBigEndian=Big-Endian (PowerPC Byte Order)"
"$$$/AmioAIFF/FormatOptionsXML/ByteOrderLittleEndian=Little-Endian (Intel Byte Order)"
"$$$/AmioAIFF/FormatOptionsXML/ByteOrdering=字节顺序:"
"$$$/AmioAIFF/FormatOptionsXML/Cancel=取消"
"$$$/AmioAIFF/FormatOptionsXML/OK=确定"
"$$$/AmioAIFF/FormatOptionsXML/SampleType=采样类型:"
"$$$/AmioAT/FormatOptionsXML/Bitrate=Bitrate:"
"$$$/AmioAT/FormatOptionsXML/Cancel=Cancel"
"$$$/AmioAT/FormatOptionsXML/FileType=File Type:"
"$$$/AmioAT/FormatOptionsXML/FormatType=Format:"
"$$$/AmioAT/FormatOptionsXML/Mode=Mode:"
"$$$/AmioAT/FormatOptionsXML/OK=OK"
"$$$/AmioAiff/AmioAiffPrivateSettings/SampleType/Float32=32 位浮点（IEEE）"
"$$$/AmioAiff/AmioAiffPrivateSettings/SampleType/SInt16=16 位整数"
"$$$/AmioAiff/AmioAiffPrivateSettings/SampleType/SInt24=24 位整数"
"$$$/AmioAiff/AmioAiffPrivateSettings/SampleType/SInt32=32 位整数"
"$$$/AmioAiff/AmioAiffPrivateSettings/SampleType/SInt8=8 位整数"
"$$$/AmioAiff/AmioAiffPrivateSettings/SampleType/Unknown=未知采样类型"
"$$$/AmioLSF/EncodingType/ALAW=a-Law 4 位 PCM (ITU-T G.711)"
"$$$/AmioLSF/EncodingType/DOUBLE=64 位 IEEE 浮点"
"$$$/AmioLSF/EncodingType/DPCM_16=Differential PCM (16 位)"
"$$$/AmioLSF/EncodingType/DPCM_8=Differential PCM (8 位)"
"$$$/AmioLSF/EncodingType/DWVW_12=Delta Width Variable Word (12 位)"
"$$$/AmioLSF/EncodingType/DWVW_16=Delta Width Variable Word (16 位)"
"$$$/AmioLSF/EncodingType/DWVW_24=Delta Width Variable Word (24 位)"
"$$$/AmioLSF/EncodingType/DWVW_N=Delta Width Variable Word encoding (n-bit)"
"$$$/AmioLSF/EncodingType/FLOAT=32 位 IEEE 浮点"
"$$$/AmioLSF/EncodingType/G721_32=ADPCM 32 kpbs (ITU-T G.721)"
"$$$/AmioLSF/EncodingType/G723_24=ADPCM 24 kpbs (ITU-T G.723)"
"$$$/AmioLSF/EncodingType/G723_40=ADPCM 40 kpbs (ITU-T G.723)"
"$$$/AmioLSF/EncodingType/GSM610=GSM 6.10 codec (ETSI 6.10)"
"$$$/AmioLSF/EncodingType/IMA_ADPCM=IMA 4 位 ADPCM"
"$$$/AmioLSF/EncodingType/MS_ADPCM=Microsoft 4 位 ADPCM"
"$$$/AmioLSF/EncodingType/PCM_16=16 位 PCM"
"$$$/AmioLSF/EncodingType/PCM_24=24 位 PCM"
"$$$/AmioLSF/EncodingType/PCM_32=32 位 PCM"
"$$$/AmioLSF/EncodingType/PCM_S8=8 位 PCM"
"$$$/AmioLSF/EncodingType/PCM_U8=8 位 PCM (Unsigned)"
"$$$/AmioLSF/EncodingType/ULAW=-Law 4 位 PCM (ITU-T G.711)"
"$$$/AmioLSF/EncodingType/VORBIS=Xiph Vorbis"
"$$$/AmioLSF/EncodingType/VOX_ADPCM=OKI / Dialogic ADPCM (VOX)"
"$$$/AmioLSF/FormatOptionsXML/ByteOrdering=字节顺序:"
"$$$/AmioLSF/FormatOptionsXML/ByteOrderingTT=Determines the byte order of the file."
"$$$/AmioLSF/FormatOptionsXML/Cancel=取消"
"$$$/AmioLSF/FormatOptionsXML/EncodingTT=Determines the audio data encoding format of the file."
"$$$/AmioLSF/FormatOptionsXML/FormatTT=Determines the container/file format of the file."
"$$$/AmioLSF/FormatOptionsXML/FormatType=格式:"
"$$$/AmioLSF/FormatOptionsXML/OK=确定"
"$$$/AmioLSF/FormatOptionsXML/SampleType=编码:"
"$$$/AmioLSF/FormatOptionsXML/VBRQuality=VBR Quality:"
"$$$/AmioLSF/FormatOptionsXML/VBRQualityTT=Determines the Variable Bitrate Quality of the File. (Currently only supported with Ogg Vorbis)"
"$$$/AmioLSF/FormatType/AIFF=音频交换文件格式"
"$$$/AmioLSF/FormatType/AU=Sun/NeXT AU 格式"
"$$$/AmioLSF/FormatType/AVR=Audio Visual Research"
"$$$/AmioLSF/FormatType/CAF=Core 音频文件格式"
"$$$/AmioLSF/FormatType/FLAC=FLAC 无损文件格式"
"$$$/AmioLSF/FormatType/HTK=HMM 工具包"
"$$$/AmioLSF/FormatType/IRCAM=Berkeley/IRCAM/CARL"
"$$$/AmioLSF/FormatType/MAT4=MATLAB v4.2 / GNU Octave 2.0"
"$$$/AmioLSF/FormatType/MAT5=MATLAB v5.0 / GNU Octave 2.1"
"$$$/AmioLSF/FormatType/MPC2K=Akai MPC 2000 采样"
"$$$/AmioLSF/FormatType/NIST=Sphere NIST 格式"
"$$$/AmioLSF/FormatType/OGG=Xiph OGG 容器"
"$$$/AmioLSF/FormatType/PAF=Ensoniq PARIS 音频格式"
"$$$/AmioLSF/FormatType/PVF=便携式声音格式"
"$$$/AmioLSF/FormatType/RAW=Raw数据"
"$$$/AmioLSF/FormatType/RF64=MBWF / RF64"
"$$$/AmioLSF/FormatType/SD2=Sound Designer II 音频文件"
"$$$/AmioLSF/FormatType/SDS=MIDI 采样传送标准"
"$$$/AmioLSF/FormatType/SVX=Amiga IFF / SVX8 / SV16 格式"
"$$$/AmioLSF/FormatType/VOC=Creative Voice"
"$$$/AmioLSF/FormatType/W64=Sonic Foundry / Sony Wave 64"
"$$$/AmioLSF/FormatType/WAV=波形音频"
"$$$/AmioLSF/FormatType/WAVEX=Microsoft WAVEFORMATEX"
"$$$/AmioLSF/FormatType/WVE=Psion Series 3 Format"
"$$$/AmioLSF/FormatType/XI=Fasttracker 2 Extended Instrument"
"$$$/AmioLSF/RawOptionsXML/1=1"
"$$$/AmioLSF/RawOptionsXML/6000=6000"
"$$$/AmioLSF/RawOptionsXML/ByteOrdering=字节顺序:"
"$$$/AmioLSF/RawOptionsXML/ByteOrderingTT=决定文件字节顺序。"
"$$$/AmioLSF/RawOptionsXML/Bytes=字节   (0x@0)"
"$$$/AmioLSF/RawOptionsXML/Cancel=取消"
"$$$/AmioLSF/RawOptionsXML/Channels=声道:"
"$$$/AmioLSF/RawOptionsXML/ChannelsTT=Determines the number of interleaved channels in the file(s)."
"$$$/AmioLSF/RawOptionsXML/EncodingTT=Determines the audio data encoding format of the file(s)."
"$$$/AmioLSF/RawOptionsXML/FormatTT=Determines the container/file format of the file(s)."
"$$$/AmioLSF/RawOptionsXML/FormatType=格式:"
"$$$/AmioLSF/RawOptionsXML/Hz=Hz"
"$$$/AmioLSF/RawOptionsXML/OK=确定"
"$$$/AmioLSF/RawOptionsXML/SampleRate=采样率:"
"$$$/AmioLSF/RawOptionsXML/SampleRateTT=Determines the sample rate of the file(s)."
"$$$/AmioLSF/RawOptionsXML/SampleType=编码:"
"$$$/AmioLSF/RawOptionsXML/StartByteOffset=Start Byte Offset:"
"$$$/AmioLSF/RawOptionsXML/StartOffsetTT=Determines the position at which reading of the file should start."
"$$$/AmioLSF/libsndfilePrivateError/SFE_AIFF_AIFF_NO_FORM=AIFF 文件错误，'AIFF' 标记没有 'FORM'。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AIFF_BAD_COMM_CHUNK=AIFF 文件错误，损坏的 'COMM' 数据块。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AIFF_BAD_PEAK=AIFF 文件错误，损坏的 'PEAK' 数据块。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AIFF_COMM_CHUNK_SIZE=AIFF 文件错误，，损坏的 'COMM' 数据块大小。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AIFF_COMM_NO_FORM=AIFF 文件错误，'FORM' 没有'COMM' 标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AIFF_NO_DATA=AIFF 文件错误，没有声音数据。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AIFF_NO_FORM=AIFF 文件错误，损坏的 'FORM' 标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AIFF_NO_SSND=AIFF 文件错误，损坏的 'SSND' 数据块。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AIFF_PEAK_B4_COMM=AIFF 文件错误，在 'COMM' 数据块之前发现 'PEAK' 数据块。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AIFF_RW_SSND_NOT_LAST=AIFF 文件错误，如果 SSND 数据块在文件末端，唯一可能是 RDWR 。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AIFF_SSND_NO_COMM=AIFF 文件错误，'COMM'不包含 'SSND' 标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AIFF_UNKNOWN_CHUNK=AIFF 文件错误，未知数据块。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AMBIGUOUS_SEEK=文件组合打开模式与查找命令不明确。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AU_EMBED_BAD_LEN=未知长度的嵌入 AU 文件。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AU_NO_DOTSND=AU 文件错误，丢失 '.snd' 或 'dns.' 标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_AU_UNKNOWN_FORMAT=AU 文件错误，未知格式。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_BROADCAST_INFO_SIZE=Bad SF_BROADCAST_INFO_SIZE."
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_COMMAND_PARAM=Bad parameter passed to function sf_command."
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_ENDIAN=Bad endian-ness. Try default endian-ness"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_FILE=文件不存在或不是一个规范文件（可能是一个通道？）。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_FILE_PTR=Bad FILE pointer."
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_FILE_READ=文件存在但没有数据可被读取。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_INT_PTR=内部错误，指针损坏。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_MODE_RW=此文件格式不支持读取/写入模式。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_OFFSET=所提供的偏移超过文件末端。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_OPEN_MODE=文件打开的损坏模式参数。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_READ_ALIGN=试图读取一个非整数声道数。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_SEEK=内部 psf_fseek() 失败。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_SF_INCOMPLETE=SF_PRIVATE 结构与头部解析末端不完整。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_SF_INFO=内部错误：SF_INFO 结构不完整。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_SF_INFO_PTR=NULL SF_INFO pointer passed to libsndfile."
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_SNDFILE_PTR=不是有效的 SNDFILE* 指针。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_STAT_SIZE=libsndfile was misconfigured at compile time (sizeof statbuf.st_size)."
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_VIRTUAL_IO=在 SF_VIRTUAL_IO 结构上的损坏指示器。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_BAD_WRITE_ALIGN=试图写入非整数的声道数。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_CHANNEL_COUNT=指定了过多声道。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_CHANNEL_COUNT_ZERO=声道数为零。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_CMD_HAS_DATA=因为文件已有音频数据而命令无效。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_DWVW_BAD_BITWIDTH=损坏的 DWVW 编码位宽。必须是 12，16，或 24 中任意一个。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_FLAC_BAD_HEADER=损坏的 flac 头部。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_FLAC_BAD_SAMPLE_RATE=FLAC 不支持此采样率。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_FLAC_INIT_DECODER=flac 解码器初始化期间有问题。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_FLAC_LOST_SYNC=FLAC 解码器丢失同步。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_FLAC_NEW_DECODER=创建 flac 解码器期间有问题。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_FLAC_UNKOWN_ERROR=flac 解码器中有未知错误。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_G72X_NOT_MONO=G.72x 编码不支持超过1声道。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_HTK_NO_PIPE=不能在 pipe 上操作 HTK 文件。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_INTERLEAVE_MODE=试图写入到带非交错数据的文件。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_INTERLEAVE_READ=在交错读取操作期间读取出错。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_INTERLEAVE_SEEK=在隔行交错读取操作期间搜索出错。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_INTERNAL=未确定的内部错误。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_IRCAM_BAD_CHANNELS=IRCAM 文件错误，损坏的声道计算。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_IRCAM_NO_MARKER=IRCAM 文件错误，损坏的 IRCAM 标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_IRCAM_UNKNOWN_FORMAT=IRCAM 文件错误，未知的编码格式。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_MALLOC_FAILED=Internal malloc () failed."
"$$$/AmioLSF/libsndfilePrivateError/SFE_MAT4_BAD_NAME=MAT4 文件错误。没有可变名称。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_MAT4_NO_SAMPLERATE=MAT4 文件错误。没有采样率。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_MAT5_BAD_ENDIAN=MAT5 文件错误。不能确定 endian-ness。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_MAT5_NO_BLOCK=MAT5 文件错误。损坏的块结构。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_MAT5_SAMPLE_RATE=MAT5 文件错误。不能确定采样率。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_MAX_ERROR=最大错误量。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_NIST_BAD_ENCODING=NIST 文件错误，不支持的压缩格式。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_NIST_BAD_HEADER=NIST 文件错误，损坏的头部。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_NIST_CRLF_CONVERISON=NIST 文件由 Windows CR 到 CRLF 转换处理时损坏。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_NOT_READMODE=试图在当前打开的文件上写入。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_NOT_SEEKABLE=试图在不可搜索的文件类型上搜索。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_NOT_WRITEMODE=试图在当前打开的用于读取的文件上写入。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_NO_EMBEDDED_RDWR=不能打开嵌入文件读/写。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_NO_EMBED_SUPPORT=不支持此文件格式嵌入。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_NO_PIPE_WRITE=此文件格式不支持 pipe 写入。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_OPEN_FAILED=无法打开文件。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_OPEN_PIPE_RDWR=试图在读取/写入模式中打开 pipe。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_PAF_BAD_CHANNELS=Error in PAF file. Bad channel count."
"$$$/AmioLSF/libsndfilePrivateError/SFE_PAF_NO_MARKER=PAF 文件错误，没有标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_PAF_SHORT_HEADER=PAF 文件错误。文件比最小头部更短。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_PAF_UNKNOWN_FORMAT=PAF 文件错误，未知格式。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_PAF_VERSION=PAF 文件错误，损坏版本。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_PVF_BAD_BITWIDTH=PVF 文件错误。位宽度损坏。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_PVF_BAD_HEADER=PVF 文件错误。头部损坏。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_PVF_NO_PVF1=PVF 文件错误。不是 PVF1 标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_RAW_BAD_BITWIDTH=RAW 文件位宽必须是8的倍数。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_RAW_BAD_FORMAT=在打开 RAW 文件读取时，SF_INFO 结构中有损坏格式区域。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_RAW_READ_BAD_SPEC=打开 RAW 读取时出错。必须指定格式与声道。也许试图打开不支持的格式。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_RDWR_BAD_HEADER=由于头部中的串行数据，不能在读取/写入模式中打开文件。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_RDWR_POSITION=在 RDWR 位置上有错误。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_RF64_NOT_RF64=不是 RF64 文件。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SD2_BAD_DATA_LENGTH=损坏的数据长度。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SD2_BAD_DATA_OFFSET=损坏的数据偏移。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SD2_BAD_MAP_LENGTH=损坏的映射长度。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SD2_BAD_MAP_OFFSET=损坏的映射偏移。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SD2_BAD_RSRC=损坏的资源分支。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SD2_BAD_SAMPLE_SIZE=损坏的采样大小。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SD2_FD_DISALLOWED=不能打开没有文件名的 SD2 文件。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SDS_BAD_BIT_WIDTH=用于 SDS 文件的位宽损坏。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SDS_NOT_SDS=不是 SDS 文件。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SEEK_FAILED=参数 OK，但是 psf_seek() 失败。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_STR_BAD_STRING=损坏的串。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_STR_BAD_TYPE=损坏的串行数据类型。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_STR_MAX_COUNT=已达到最大串行数据计算。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_STR_MAX_DATA=已达到最大串行数据存储。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_STR_NOT_WRITE=在文件不在写入模式时试图设置串行。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_STR_NO_ADD_END=在文件末端，文件类型不支持串行添加。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_STR_NO_SUPPORT=文件类型不支持串行数据。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_STR_WEIRD=意外的串行错误。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SVX_BAD_COMP=8SVX / 16SV 文件错误，不支持的压缩格式。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SVX_BAD_NAME_LENGTH=8SVX / 16SV 文件错误，NAME 数据块太长。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SVX_NO_BODY=8SVX / 16SV 文件错误，不是 'BODY' 标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SVX_NO_DATA=8SVX / 16SV 文件错误，不是声音数据。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_SVX_NO_FORM=8SVX / 16SV 文件错误，不是 'FORM' 标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_UNIMPLEMENTED=文件包含数据是一个未能实施的格式。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_UNKNOWN_FORMAT=文件包含数据是一个未知格式。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_VOC_BAD_FORMAT=VOC 文件错误，损坏格式。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_VOC_BAD_MARKER=VOC 文件错误，损坏的文件标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_VOC_BAD_SECTIONS=VOC 文件错误，不兼容的 VOC 片段。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_VOC_BAD_VERSION=VOC 文件错误，无效的版本号。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_VOC_MULTI_PARAM=VOC 文件错误，文件包含了多个位数与声道宽度。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_VOC_MULTI_SAMPLERATE=VOC 文件错误，超出了一个已定义的采样率。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_VOC_MULTI_SECTION=未生效的 VOC 文件功能，文件包含了多个声音片段。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_VOC_NO_CREATIVE=VOC 文件错误，不是 'Creative Voice File' 标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_VOC_NO_PIPE=不能在 pipe 上操作 VOC 文件。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_VOC_SECTION_COUNT=VOC 文件错误，过多片段。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_VORBIS_ENCODER_BUG=采样率选择在此 CPU 上引发了一个已知 Vorbis 编码缺陷。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_W64_64_BIT=W64 文件错误，文件含有 64 bit 偏移。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_W64_ADPCM_CHANNELS=ADPCM W64 文件错误。无效的声道数量。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_W64_ADPCM_NOT4BIT=ADPCM W64 文件错误。无效的位宽。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_W64_GSM610_FORMAT=GSM610 W64 文件错误。无效的格式数据块。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_W64_NO_DATA=W64 文件错误。不是 'data' 数据块标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_W64_NO_RIFF=W64 文件错误。不是 'riff' 数据块标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_W64_NO_WAVE=W64 文件错误。不是 'wave' 数据块标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_ADPCM_CHANNELS=ADPCM WAV 文件错误。无效的声道数量。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_ADPCM_NOT4BIT=ADPCM WAV 文件错误。无效的位宽。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_BAD_BLOCKALIGN=WAV 文件错误。在 'fmt ' 数据块内的块校正出错。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_BAD_FACT=WAV 文件错误。'fact' 数据块未在放置中。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_BAD_FMT=WAV/W64/RF64 文件错误。畸形 'fmt ' 数据块。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_BAD_FORMAT=WAV 文件错误。'fmt ' 数据块错误。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_BAD_LIST=WAV 文件错误。 畸形 LIST 数据块。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_BAD_PEAK=WAV 文件错误。损坏的 'PEAK' 数据块。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_FMT_SHORT=WAV/W64/RF64 文件错误。短的 'fmt ' 数据块。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_GSM610_FORMAT=GSM610 WAV 文件错误。无效的格式数据块。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_NO_DATA=WAV 文件错误。不是 'data' 数据块标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_NO_FMT=WAV/W64/RF64 文件错误。不是 'fmt ' 数据块标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_NO_RIFF=WAV 文件错误。不是 'RIFF' 数据块标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_NO_WAVE=WAV 文件错误。不是 'WAVE' 数据块标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_PEAK_B4_FMT=WAV 文件错误。在 'fmt ' 数据块之前发现 'PEAK' 数据块。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_UNKNOWN_CHUNK=WAV 文件错误。文件包含了未知数据块标记。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WAV_WVPK_DATA=WAV 文件错误。数据是 WAVPACK 格式。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WRONG_SEEK=无效的搜索参数。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WVE_NOT_WVE=不是 WVE 文件。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_WVE_NO_PIPE=不能在 pipe 上操作 WVE 文件。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_XI_BAD_HEADER=XI 文件错误。损坏头部。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_XI_EXCESS_SAMPLES=XI 文件错误。文件内采样过度。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_XI_NO_PIPE=不能在 pipe 上操作 XI 文件。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_ZERO_MAJOR_FORMAT=主要格式为 0。"
"$$$/AmioLSF/libsndfilePrivateError/SFE_ZERO_MINOR_FORMAT=主要格式为 0。"
"$$$/AmioLSF/libsndfilePublicError/SF_ERR_MALFORMED_FILE=已支持的文件格式，但文件有缺陷。"
"$$$/AmioLSF/libsndfilePublicError/SF_ERR_NO_ERROR=没有错误."
"$$$/AmioLSF/libsndfilePublicError/SF_ERR_SYSTEM=系统错误."
"$$$/AmioLSF/libsndfilePublicError/SF_ERR_UNRECOGNISED_FORMAT=无法识别的格式。"
"$$$/AmioLSF/libsndfilePublicError/SF_ERR_UNSUPPORTED_ENCODING=已支持的文件格式，但不支持编码。"
"$$$/AmioMp3/FormatOptionsXML/Bitrate=比特率:"
"$$$/AmioMp3/FormatOptionsXML/CompressionType=类型:"
"$$$/AmioMp3/FormatOptionsXML/Constant=恒定"
"$$$/AmioMp3/FormatOptionsXML/Variable=可变"
"$$$/AmioPlugIns/AmioAT/EmptyFormatDescription=(Unnamed Format: '@0', 0x@1)"
"$$$/AmioPlugIns/AmioAT/Error4CC=Error Code: '@0'"
"$$$/AmioPlugIns/AmioAT/ErrorNumber=Error Code: @0"
"$$$/AmioPlugIns/AmioAT/FilterName=Apple AudioToolbox"
"$$$/AmioPlugIns/AmioAT/FinishWriteGeneralError=Error closing the file."
"$$$/AmioPlugIns/AmioAT/FormatATEmpty=Apple AudioToolbox"
"$$$/AmioPlugIns/AmioAT/GeneralOpen=General error attempting to open file using AmioAT plug-in."
"$$$/AmioPlugIns/AmioAT/GeneralRead=General error attempting to read file using AmioAT plug-in."
"$$$/AmioPlugIns/AmioAT/PlugInName=Apple AudioToolbox Amio plug-in"
"$$$/AmioPlugIns/AmioAT/WriteSamplesEncoder=Error writing samples to the file"
"$$$/AmioPlugIns/AmioAT/WriteStartGeneral=Error creating file @0.  The destination may be full or no longer available."
"$$$/AmioPlugIns/AmioAT/kError_AudioConverterFillComplexBuffer=Appl AudioToolbox reported an error while processing this file."
"$$$/AmioPlugIns/AmioAT/kError_AudioConverterGetCurrentInputStreamDescription=Apple AudioToolbox was unable to get the input format to convert the file."
"$$$/AmioPlugIns/AmioAT/kError_AudioConverterGetCurrentOutputStreamDescription=Apple AudioToolbox was unable to get the output format to convert the file."
"$$$/AmioPlugIns/AmioAT/kError_AudioConverterNew=Apple AudioToolbox was unable to create a converter between the input and output formats for the specified file."
"$$$/AmioPlugIns/AmioAT/kError_AudioConverterSetDecompressionMagicCookie=Apple AudioToolbox was unable to set the Decompression Magic Cookie (elementary stream descriptor) to convert the file."
"$$$/AmioPlugIns/AmioAT/kError_AudioConverterSetEncodeBitRate=Apple AudioToolbox was unable to set the encode bitrate to convert the file."
"$$$/AmioPlugIns/AmioAT/kError_AudioConverterSetPrimeInfo=Apple AudioToolbox was unable to set the priming info to convert the compressed file."
"$$$/AmioPlugIns/AmioAT/kError_AudioFileGetDataFormat=Unable to get audio data format via Apple AudioToolbox."
"$$$/AmioPlugIns/AmioAT/kError_AudioFileGetFormatList=Apple AudioToolbox was unable to get the list of formats from the specified file."
"$$$/AmioPlugIns/AmioAT/kError_AudioFileGetMagicCookieData=Apple AudioToolbox was unable to read the Magic Cookie (elementary stream descriptor) from the specified file."
"$$$/AmioPlugIns/AmioAT/kError_AudioFileGetPacketSizeUpperBound=Apple AudioToolbox was unable to read the maximum packet size for this VBR file."
"$$$/AmioPlugIns/AmioAT/kError_AudioFileOpenURL=Apple AudioToolbox cannot open the specified file."
"$$$/AmioPlugIns/AmioAT/kError_AudioFormatGetDecodeFormatIDs=Apple AudioToolbox was unable to find a decoder for the specified file."
"$$$/AmioPlugIns/AmioAT/kError_ExtAudioFileCreateWithURL=Apple AudioToolbox cannot create the specified file."
"$$$/AmioPlugIns/AmioAT/kError_UnsupportedDataFormatError=Unsupported Data Format for Apple AudioToolbox."
"$$$/AmioPlugIns/AmioAiff/CorruptFileComm=Corrupt File: COMM chunk missing or invalid."
"$$$/AmioPlugIns/AmioAiff/CorruptFileSsnd=Corrupt File: SSND chunk missing or invalid."
"$$$/AmioPlugIns/AmioAiff/FileDoesNotExist=文件不存在。"
"$$$/AmioPlugIns/AmioAiff/FormatAIFF=音频交换文件格式 @0"
"$$$/AmioPlugIns/AmioAiff/FormatBitFormat=不支持的位深度或格式。"
"$$$/AmioPlugIns/AmioAiff/FormatNameAIFF=AIFF"
"$$$/AmioPlugIns/AmioAiff/FormatUnknown=不支持或未知格式，编码 @0."
"$$$/AmioPlugIns/AmioAiff/FormatUnknownDesc=不支持或未知格式，编码 @0: @1"
"$$$/AmioPlugIns/AmioAiff/GeneralOpen=试图打开文件使用 AmioAiff 插件的一般错误。"
"$$$/AmioPlugIns/AmioAiff/NonIntegerSampleRate=该文件报告了一个每秒采样 @0 的速率。整数率 @1 将被用于替代。"
"$$$/AmioPlugIns/AmioAiff/NotAnAiffFile=损坏文件: 不是有效的 AIFF/AIFC 文件。"
"$$$/AmioPlugIns/AmioAiff/PlugInName=Audition AIFF Amio 插件"
"$$$/AmioPlugIns/AmioAiff/UnsupportedBitDepth=不支持的位深度: 每秒采样 @0 位"
"$$$/AmioPlugIns/AmioAiff/WriteFinishGeneral=@0 在完成文件时出错。"
"$$$/AmioPlugIns/AmioAiff/WriteSamplesGeneral=@0 写入采样到文件时出错。"
"$$$/AmioPlugIns/AmioAiff/WriteStartGeneral=@0 创建文件 @1 时出错。目标已满或不再可用。"
"$$$/AmioPlugIns/AmioAiff/WriteStartMetadata=写入元数据到文件起点出错。"
"$$$/AmioPlugIns/AmioAiff/ZeroChannels=文件没有任何声道而不被支持。"
"$$$/AmioPlugIns/AmioLSF/EndianFormatBig=Big-Endian (PowerPC Byte Order)"
"$$$/AmioPlugIns/AmioLSF/EndianFormatCPU=CPU Endian Format"
"$$$/AmioPlugIns/AmioLSF/EndianFormatDefault=默认字节"
"$$$/AmioPlugIns/AmioLSF/EndianFormatLittle=Little-Endian (Intel Byte Order)"
"$$$/AmioPlugIns/AmioLSF/EndianFormatUnknown=未知 Endian 格式 @0"
"$$$/AmioPlugIns/AmioLSF/FilePathEncodingError=libsndfile 的此版本不支持带多重字符的文件路径。"
"$$$/AmioPlugIns/AmioLSF/FinishWriteGeneral=@0 完成文件出错"
"$$$/AmioPlugIns/AmioLSF/FormatLSF=libsndfile: @0"
"$$$/AmioPlugIns/AmioLSF/FormatLSFEmpty=libsndfile"
"$$$/AmioPlugIns/AmioLSF/FormatLSFPrefix=libsndfile: "
"$$$/AmioPlugIns/AmioLSF/GeneralCreateErrorCode=AmioLSF 插件无法创建文件。代码: @0"
"$$$/AmioPlugIns/AmioLSF/GeneralCreateErrorCodeMoreInfo=AmioLSF 插件无法创建文件。代码: @0.  @1"
"$$$/AmioPlugIns/AmioLSF/GeneralFormatErrorCode=此文件不能由 libsndfile 支持。代码: @0"
"$$$/AmioPlugIns/AmioLSF/GeneralFormatErrorCodeMoreInfo=此文件不能由 libsndfile 支持。代码: @0.  @1"
"$$$/AmioPlugIns/AmioLSF/GeneralOpen=试图打开文件使用 AmioLSF 插件的一般错误。"
"$$$/AmioPlugIns/AmioLSF/GeneralOpenErrorCode=AmioLSF 插件不能打开文件。代码: @0"
"$$$/AmioPlugIns/AmioLSF/GeneralOpenErrorCodeMoreInfo=AmioLSF 插件不能打开文件。代码: @0.  @1"
"$$$/AmioPlugIns/AmioLSF/GeneralParameterErrorCode=AmioLSF 中的无效参数。代码: @0"
"$$$/AmioPlugIns/AmioLSF/GeneralParameterErrorCodeMoreInfo=AmioLSF 中的无效参数。代码: @0.  @1"
"$$$/AmioPlugIns/AmioLSF/PlugInName=Audition libsndfile Amio 插件"
"$$$/AmioPlugIns/AmioLSF/UnsupportedBitDepth=不支持的音频位深度: @0."
"$$$/AmioPlugIns/AmioLSF/UnsupportedChannels=不支持的声道数: @0."
"$$$/AmioPlugIns/AmioLSF/VBRQuality=VBR Quality: @0%"
"$$$/AmioPlugIns/AmioLSF/WriteSamplesEncoder=@0 写入采样到文件出错。"
"$$$/AmioPlugIns/AmioLSF/WriteStartGeneral=@0 创建文件 @1 出错。目标可能已满或不再可用。"
"$$$/AmioPlugIns/AmioLSF/libsndfile=libsndfile"
"$$$/AmioPlugIns/AmioMp2/FormatMp2Empty=MP2"
"$$$/AmioPlugIns/AmioMp2/FormatMp2Prefix=MP2: @0"
"$$$/AmioPlugIns/AmioMp2/JointStereo=(Joint Stereo)"
"$$$/AmioPlugIns/AmioMp2/MP2Audio=MP2 Audio"
"$$$/AmioPlugIns/AmioMp2/MPEG-1=MPEG-1"
"$$$/AmioPlugIns/AmioMp2/MPEG-2=MPEG-2"
"$$$/AmioPlugIns/AmioMp2/MPEG-2_5=MPEG-2.5"
"$$$/AmioPlugIns/AmioMp2/MPEG-Unknown=MPEG-@0"
"$$$/AmioPlugIns/AmioMp2/PlugInName=Audition MPEG Audio Layer II Amio plug-in"
"$$$/AmioPlugIns/AmioMp2/WriteStartGeneral=Error @0 creating file @1.  The destination may be full or no longer available."
"$$$/AmioPlugIns/AmioMp2/_AudioLayerI= Audio Layer I"
"$$$/AmioPlugIns/AmioMp2/_AudioLayerII= Audio Layer II"
"$$$/AmioPlugIns/AmioMp2/_AudioLayerIII= Audio Layer III"
"$$$/AmioPlugIns/AmioMp2/_AudioLayerUnknown= Audio Layer @0"
"$$$/AmioPlugIns/AmioMp2/_num_kbps=, @0 kbps"
"$$$/AmioPlugIns/AmioMp2/_num_kbps_ABR=, @0 kbps ABR"
"$$$/AmioPlugIns/AmioMp2/_num_kbps_CBR=, @0 kbps CBR"
"$$$/AmioPlugIns/AmioMp2/_num_kbps_VBR=, @0 kbps VBR"
"$$$/AmioPlugIns/AmioMp3/DecodeInitializeError=解码器不能初始化。"
"$$$/AmioPlugIns/AmioMp3/DecodeNotSupported=无效或不支持的文件。"
"$$$/AmioPlugIns/AmioMp3/DecodeNotSupportedWaveWrapped=无效或不支持的文件。"
"$$$/AmioPlugIns/AmioMp3/FormatMp3=MP3 音频"
"$$$/AmioPlugIns/AmioMp3/FormatMp3ConstantBitRate=MP3 @0 Kbps CBR"
"$$$/AmioPlugIns/AmioMp3/FormatMp3ConstantBitRateWriteStart=MP3 @0 Kbps CBR OFL"
"$$$/AmioPlugIns/AmioMp3/FormatMp3OriginalFileLengthAbbreviation=OFL"
"$$$/AmioPlugIns/AmioMp3/FormatMp3VariableBitRate=MP3 @0 Kbps VBR"
"$$$/AmioPlugIns/AmioMp3/FormatMp3VariableBitRateWriteStart=MP3 @0 VBR OFL"
"$$$/AmioPlugIns/AmioMp3/Mp3ProWarning=mp3PRO 格式不被支持。文件将作为标准 MP3 文件处理。"
"$$$/AmioPlugIns/AmioMp3/PlugInName=Audition Mp3 Amio 插件"
"$$$/AmioPlugIns/AmioMp3/WaveWrappedWarning=这个波形音频文件含有 MP3 音频数据。在存储时，它将被写入为一个 MP3 文件，不再包含于波形音频容器内。"
"$$$/AmioPlugIns/AmioMp3/WriteStartCreateID3v2=错误写入空白 MP3 ID3v2 标记。"
"$$$/AmioPlugIns/AmioMp3/WriteStartGeneral=@0 创建文件 @1 错误。目标可能已满或不再可用。"
"$$$/AmioPlugIns/AmioMp3/WriteStartID3v2=错误写入 MP3 ID3v2 标记。"
"$$$/AmioPlugIns/AmioMp3SettingsDialog/BitrateLabel=比特率:"
"$$$/AmioPlugIns/AmioMp3SettingsDialog/QualityLabel=品质:"
"$$$/AmioPlugIns/AmioQT/Channels= (@0 streams)"
"$$$/AmioPlugIns/AmioQT/ExportFormat=QuickTime (只有音频) (*.mov)"
"$$$/AmioPlugIns/AmioQT/FormatNameQT=QuickTime"
"$$$/AmioPlugIns/AmioQT/FormatQT=QuickTime: @0"
"$$$/AmioPlugIns/AmioQT/FormatQTEmpty=QuickTime"
"$$$/AmioPlugIns/AmioQT/GeneralOpen=试图打开文件使用 AmioQT 插件的一般错误。"
"$$$/AmioPlugIns/AmioQT/GeneralOpenCode=AmioQT 插件不能打开文件。代码: @0"
"$$$/AmioPlugIns/AmioQT/GeneralOpenCodeMoreInfo=AmioQT 插件不能打开文件。代码: @0.  @1"
"$$$/AmioPlugIns/AmioQT/InputFormat=QuickTime (*.mov, *.aac, *.aiff, *.avi, *.m4a, *.mp3, *.mp4, *.wav, ...)"
"$$$/AmioPlugIns/AmioQT/NoContent=没有在这个 QuickTime 文件中发现音频或视频。"
"$$$/AmioPlugIns/AmioQT/OpenCode2048=这可能表明文件无效，或使用的编码器未安装或未授权。"
"$$$/AmioPlugIns/AmioQT/PlugInName=Audition QuickTime Amio 插件"
"$$$/AmioPlugIns/AmioQT/UnsupportedBitDepth=不支持的音频位深度: @0."
"$$$/AmioPlugIns/AmioQT/ZeroLengthNotSupported=错误: QuickTime 不支持文件或零长度。"
"$$$/AmioPlugIns/AmioQt/CodecUnsupported=The video found in this file requires a codec which is not installed on this system: @0."
"$$$/AmioPlugIns/AmioQt/CodecUnsupportedError=No playable audio or video was found in this QuickTime file. The video stream requires a codec which is not installed on this system: @0."
"$$$/AmioPlugIns/AmioQt/WarningCodeVideoDropped=The video found in this file either appears corrupt, is unsupported, or contains references to media that cannot be found."
"$$$/AmioPlugIns/AmioWav/CorruptFile=损坏文件: 不是一个有效 RIFF 文件。"
"$$$/AmioPlugIns/AmioWav/FileDoesNotExist=文件不存在。"
"$$$/AmioPlugIns/AmioWav/FormatADPCM=不支持的压缩格式: ADPCM."
"$$$/AmioPlugIns/AmioWav/FormatALAW=不支持的压缩格式: A-Law."
"$$$/AmioPlugIns/AmioWav/FormatBitFormat=不支持的位深度或格式。"
"$$$/AmioPlugIns/AmioWav/FormatChunkTooLarge=要读取的格式块太大。这可能表明是一个损坏文件。"
"$$$/AmioPlugIns/AmioWav/FormatGSM=不支持的压缩格式: GSM 6.10."
"$$$/AmioPlugIns/AmioWav/FormatIMADVIADPCM=不支持的压缩格式: IMA/DVI ADPCM."
"$$$/AmioPlugIns/AmioWav/FormatMULAW=不支持的压缩格式: mu-Law."
"$$$/AmioPlugIns/AmioWav/FormatNameWAV=Wave PCM"
"$$$/AmioPlugIns/AmioWav/FormatUnknown=不支持或未知格式，编码 @0."
"$$$/AmioPlugIns/AmioWav/FormatUnknownDesc=不支持或未知格式，编码 @0: @1"
"$$$/AmioPlugIns/AmioWav/FormatWAV=波形音频 @0"
"$$$/AmioPlugIns/AmioWav/GeneralOpen=试图打开文件使用 AmioWav 插件的一般错误。"
"$$$/AmioPlugIns/AmioWav/InvalidFormat=无效的格式。这可能表明是一个损坏文件。"
"$$$/AmioPlugIns/AmioWav/NoFormatInfoFound=没有发现格式信息。"
"$$$/AmioPlugIns/AmioWav/NotAWaveFile=损坏文件: 不是一个波形文件。"
"$$$/AmioPlugIns/AmioWav/PlugInName=Audition Wave Amio 插件"
"$$$/AmioPlugIns/AmioWav/WriteFinishGeneral=@0 完成文件时出错。"
"$$$/AmioPlugIns/AmioWav/WriteSamplesGeneral=@0 写入采样到文件出错。"
"$$$/AmioPlugIns/AmioWav/WriteStartGeneral=@0 创建文件 @1 出错。目标可能已满或不再可用。"
"$$$/AmioPlugIns/AmioWav/WriteStartMetadata=错误写入元数据到文件起点。"
"$$$/AmioTwoLame/FormatOptionsDialogXML/Cancel=Cancel"
"$$$/AmioTwoLame/FormatOptionsDialogXML/OK=OK"
"$$$/AmioTwoLame/FormatOptionsViewXML/Advanced=Advanced"
"$$$/AmioTwoLame/FormatOptionsViewXML/AthHotTextIDTT=Adjusts the Absolute Threshold of Hearing value used in calculations of certain psychoacoustic models."
"$$$/AmioTwoLame/FormatOptionsViewXML/AthLevel=ATH Adjustment:"
"$$$/AmioTwoLame/FormatOptionsViewXML/Bitrate=Bitrate:"
"$$$/AmioTwoLame/FormatOptionsViewXML/CRCCheckboxIDTT=Enabling this option will protect the MPEG file from bit errors by embedding CRC (Cyclic Redundancy Check) information."
"$$$/AmioTwoLame/FormatOptionsViewXML/Channels=Channel Mode:"
"$$$/AmioTwoLame/FormatOptionsViewXML/CompressionType=Type:"
"$$$/AmioTwoLame/FormatOptionsViewXML/Copyright=Copyright:"
"$$$/AmioTwoLame/FormatOptionsViewXML/CopyrightCheckboxIDTT=This flag specifies that the file is a copyrighted audio file."
"$$$/AmioTwoLame/FormatOptionsViewXML/DeEmphasis=De-Emphasis:"
"$$$/AmioTwoLame/FormatOptionsViewXML/DeEmphasisModelPopupIDTT=Setting this flag informs the decoder that a specific type of de-emphasis is needed to play back this file."
"$$$/AmioTwoLame/FormatOptionsViewXML/EmbedErrorProtection=Embed CRC Error Protection:"
"$$$/AmioTwoLame/FormatOptionsViewXML/EmbedPeakData=Embed Peak Data:"
"$$$/AmioTwoLame/FormatOptionsViewXML/EnablePadding=Enable Padding:"
"$$$/AmioTwoLame/FormatOptionsViewXML/EncoderSettings=Encoder Settings"
"$$$/AmioTwoLame/FormatOptionsViewXML/EnergyLevelCheckboxIDTT=Enabling this option will embed the peak audio level at the end of each MPEG audio frame (in the ancillary bits).  This option is commonly used in the broadcast industry for visualizing the audio in editing applications without decoding."
"$$$/AmioTwoLame/FormatOptionsViewXML/HeaderFlags=Header Flags"
"$$$/AmioTwoLame/FormatOptionsViewXML/MPEGBitestreamOptions=MPEG Bitestream Options"
"$$$/AmioTwoLame/FormatOptionsViewXML/MpegMode=MPEG 1 Layer II"
"$$$/AmioTwoLame/FormatOptionsViewXML/Original=Original:"
"$$$/AmioTwoLame/FormatOptionsViewXML/OriginalCheckboxIDTT=This flag specifies that the file is an original file."
"$$$/AmioTwoLame/FormatOptionsViewXML/PaddingCheckboxIDTT=Enabling this option will adjust the MPEG audio frame sizes to achieve the overall target bitrate"
"$$$/AmioTwoLame/FormatOptionsViewXML/PsycModel=Psychoacoustic Model:"
"$$$/AmioTwoLame/FormatOptionsViewXML/PsycModelPopupIDTT=Sets the Psychoacoustic Model to be used during Encoding."
"$$$/AmioWAV/AmioWavPrivateSettings/SampleType/Float32=32 位浮点（IEEE）"
"$$$/AmioWAV/AmioWavPrivateSettings/SampleType/Float3232768=16.8 浮点（传统 Audition 格式）"
"$$$/AmioWAV/AmioWavPrivateSettings/SampleType/Float328388608=24.0 浮点（传统 Audition 格式）"
"$$$/AmioWAV/AmioWavPrivateSettings/SampleType/Float64=64 位浮点（IEEE）"
"$$$/AmioWAV/AmioWavPrivateSettings/SampleType/SInt16=16 位整数"
"$$$/AmioWAV/AmioWavPrivateSettings/SampleType/SInt20=20 位整数"
"$$$/AmioWAV/AmioWavPrivateSettings/SampleType/SInt24=24 位整数"
"$$$/AmioWAV/AmioWavPrivateSettings/SampleType/SInt32=32 位整数"
"$$$/AmioWAV/AmioWavPrivateSettings/SampleType/SInt64=64 位整数"
"$$$/AmioWAV/AmioWavPrivateSettings/SampleType/UInt8=8 位整数"
"$$$/AmioWAV/AmioWavPrivateSettings/SampleType/Unknown=未知采样类型"
"$$$/AmioWAV/FormatOptionsXML/4GBPlusSupport=4GB 增强支持:"
"$$$/AmioWAV/FormatOptionsXML/Cancel=取消"
"$$$/AmioWAV/FormatOptionsXML/MultipleDataChunks=多数据块（传统 Audition 格式）"
"$$$/AmioWAV/FormatOptionsXML/OK=确定"
"$$$/AmioWAV/FormatOptionsXML/Option=选项"
"$$$/AmioWAV/FormatOptionsXML/OutFormat=导出格式:"
"$$$/AmioWAV/FormatOptionsXML/RF64Format=RF64格式"
"$$$/AmioWAV/FormatOptionsXML/SampleType=采样类型:"
"$$$/AmpStatsGeneralTabXML/AverageRMSAmplitude=平均 RMS 振幅:"
"$$$/AmpStatsGeneralTabXML/CopyAll=复制所有"
"$$$/AmpStatsGeneralTabXML/DCOffset=DC 偏移:"
"$$$/AmpStatsGeneralTabXML/DynamicRange=动态范围:"
"$$$/AmpStatsGeneralTabXML/DynamicRangeUsed=动态范围使用:"
"$$$/AmpStatsGeneralTabXML/ITULoudness=ITU-R BS.1770-2 响度:"
"$$$/AmpStatsGeneralTabXML/Loudness=响度:"
"$$$/AmpStatsGeneralTabXML/MaxSampleValue=最大采样值:"
"$$$/AmpStatsGeneralTabXML/MaximumRMSAmplitude=最大 RMS 振幅:"
"$$$/AmpStatsGeneralTabXML/MeasuredBitDepth=测量位深度:"
"$$$/AmpStatsGeneralTabXML/MinSampleValue=最小采样值:"
"$$$/AmpStatsGeneralTabXML/MinimumRMSAmplitude=最小 RMS 振幅:"
"$$$/AmpStatsGeneralTabXML/PeakAmplitude=峰值振幅:"
"$$$/AmpStatsGeneralTabXML/PerceivedLoudness=感知响度:"
"$$$/AmpStatsGeneralTabXML/PossiblyClippedSamples=可限制的采样:"
"$$$/AmpStatsGeneralTabXML/TotalRMSAmplitude=总体 RMS 振幅:"
"$$$/AmpStatsGeneralTabXML/TruePeakAmplitude=准确峰值振幅:"
"$$$/AmpStatsHistogramTabXML/ShowChannel=显示声道:"
"$$$/AmpStatsPanel/ColumnName=\t@0"
"$$$/AmpStatsPanel/Copy=复制"
"$$$/AmpStatsPanel/CopyAll=复制所有"
"$$$/AmpStatsPanel/CopyAllData=@0@1@2@3@40dB = FS @5 Wave@6Using RMS Window of @7 ms@8Account for DC = @9"
"$$$/AmpStatsPanel/False=false"
"$$$/AmpStatsPanel/ITULoudness=ITU-R BS.1770-2 响度: @0@1"
"$$$/AmpStatsPanel/Row0Label=峰值振幅:"
"$$$/AmpStatsPanel/Row10Label=测量位深度"
"$$$/AmpStatsPanel/Row11Label=动态范围:"
"$$$/AmpStatsPanel/Row12Label=动态范围使用:"
"$$$/AmpStatsPanel/Row13Label=响度:"
"$$$/AmpStatsPanel/Row14Label=感知响度:"
"$$$/AmpStatsPanel/Row1Label=准确峰值振幅:"
"$$$/AmpStatsPanel/Row2Label=最大采样值:"
"$$$/AmpStatsPanel/Row3Label=最小采样值:"
"$$$/AmpStatsPanel/Row4Label=可能的削波采样:"
"$$$/AmpStatsPanel/Row5Label=总体 RMS 振幅:"
"$$$/AmpStatsPanel/Row6Label=最大 RMS 振幅:"
"$$$/AmpStatsPanel/Row7Label=最小 RMS 振幅:"
"$$$/AmpStatsPanel/Row8Label=平均 RMS 振幅:"
"$$$/AmpStatsPanel/Row9Label=DC 偏移:"
"$$$/AmpStatsPanel/RowData=@0\t@1@2"
"$$$/AmpStatsPanel/Scan=扫描"
"$$$/AmpStatsPanel/ScanSelection=扫描选区"
"$$$/AmpStatsPanel/Sine=正弦"
"$$$/AmpStatsPanel/Square=方形"
"$$$/AmpStatsPanel/True=true"
"$$$/AmpStatsPanel/cellDB=@0 dB"
"$$$/AmpStatsPanel/cellPercent=@0 %"
"$$$/AmpStatsPanel/trueCellDB=@0 dBTP"
"$$$/AmpStatsPanelXML/ScanAlertIconTT=源媒体已改变。使用扫描按钮更新振幅统计数据。"
"$$$/AmpStatsPanelXML/ScanSelection=扫描选区"
"$$$/AmpStatsRMSSettingsTabXML/AccountForDC=解释 DC"
"$$$/AmpStatsRMSSettingsTabXML/FSSineWave=0 dB = FS 正弦波"
"$$$/AmpStatsRMSSettingsTabXML/FSSquareWave=0 dB = FS 方形波"
"$$$/AmpStatsRMSSettingsTabXML/WindowWidth=窗口宽度:"
"$$$/AmpStatsRMSSettingsTabXML/ms=毫秒"
"$$$/Amplify/Gain=增益"
"$$$/AmplifyUI/LinkSliders=链接滑块"
"$$$/AmplitudeStatisticsPanel/General=常规"
"$$$/AmplitudeStatisticsPanel/RMSHistogram=RMS 柱形图"
"$$$/AmplitudeStatisticsPanel/RMSSettings=RMS 设置"
"$$$/AmtManager/GetDisplaySerialNumber/PreReleaseVersion=预发布"
"$$$/AmtManager/GetDisplaySerialNumber/TrialVersion=试用"
"$$$/AmtManager/ShowUserMessage/Title=@APPNAME"
"$$$/AmtManager/ShowUserMessage/ValidationFailed=您提供的许可授权未能被验证。@APPNAME 必须立即关闭。"
"$$$/AnalysisEffectPanel/Help=显示修复效果的帮助"
"$$$/AppModule/Application/Default=默认"
"$$$/AppModule/Application/LibsndfileInstallationReminder=对 libsndfile 格式的支持与 RAW 数据的导入当前不可用，因为 libsndfile 的兼容版本未发现。安装 libsndfile 的最新版本，来启用对 libsndfile 格式的支持和 RAW 数据的导入。"
"$$$/AppModule/Application/QuicktimeInstallationReminder=对 QuickTime 文件格式的支持当前不可用，因为 QuickTime 的兼容版本未能发现。安装 QuickTime 的最新版本，来启用对 QuickTime 文件格式的支持。"
"$$$/AppearancePrefsXML/AGM=为用户界面使用 Adobe 图形管理器"
"$$$/AppearancePrefsXML/AGMTT=Uncheck this box if you find that a process bound by the CPU, such as recording audio, is not performing well.  When unchecking this box, Audition will use the native operating system‚Äôs graphics manager instead of the Adobe Graphics Manager. Changing this preference will require Audition to be re-started for the change to take effect."
"$$$/AppearancePrefsXML/Appearance=界面外观"
"$$$/AppearancePrefsXML/Brightness=亮度"
"$$$/AppearancePrefsXML/BrightnessTT=确定面板，窗口与对话框的亮度或暗度"
"$$$/AppearancePrefsXML/Colors=颜色"
"$$$/AppearancePrefsXML/ColorsTT=单击调色板旁边的不同用户界面元素，以修改它们的色彩。"
"$$$/AppearancePrefsXML/Darker=更暗"
"$$$/AppearancePrefsXML/DeletePreset=删除当前选中的预设"
"$$$/AppearancePrefsXML/Lighter=更亮"
"$$$/AppearancePrefsXML/Presets=预设:"
"$$$/AppearancePrefsXML/PresetsTT=选择颜色方案预设"
"$$$/AppearancePrefsXML/SavePreset=存储当前启用的界面外观设置为一个新的预设"
"$$$/AppearancePrefsXML/UseGradients=使用渐变色"
"$$$/AppearancePrefsXML/UseGradientsTT=决定是否在用户界面元素中使用渐变色，如面板，按钮，标签等。"
"$$$/Application/CouldNotCreateFile=不能创建文件。\n未知原因。"
"$$$/Application/CouldNotSaveFile=不能保存文件。\n原因: @0"
"$$$/Application/InitApplication/Build=内部版本: @0"
"$$$/Application/InitApplication/InitAppComponents=正在初始化应用组件..."
"$$$/Application/InitApplication/Version=版本 @0"
"$$$/Application/LaunchedInSeconds=启动用时 @0 秒"
"$$$/Application/MacAboutMenu/AboutSB=关于 @APPNAME"
"$$$/Application/Multitrack/Mixdown=@0 Mixdown @1"
"$$$/ApplicationInitializer/Yes3Dots=是..."
"$$$/AuApp/CopyAudioOperation/FileInUse=文件正被其他程序占用而不可覆盖。"
"$$$/AuApp/CopyFileOnDiskOperation/OnExportFinished/DirectoryWritable=目标文件夹不可写。"
"$$$/AuApp/CopyFileOnDiskOperation/XmpMetadataWriteError=XMP元数据无法写入这个文件。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/DirectoryWritable=The target directory is not writable."
"$$$/AuApp/ExportAudioOperation/OnExportFinished/FileShare=文件正被其他应用程序使用因而不能被覆盖。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/FinishFinish=完成输出文件的处理出错。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/FlushError=试图刷新原始音频文件时有一个错误。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/Initialize=文件写入不能初始化。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/NoAudioChannels=内部错误。没有输出的音频声道可用。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/NoWaveAsset=内存错误。没有输出的波形资源可用。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/NoWriter=无法获取文件写入器。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/WriteStart=无法开始文件写入。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/XmpMetadataRename=XMP 元数据 sidecar 无法完成。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/XmpMetadataWrite=XMP 元数据无法被写入到文件。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/XmpMetadataWriteError=XMP 元数据无法被写入到文件。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/XmpMetadataWriteErrorSave=XMP 元数据无法保存到文件。"
"$$$/AuApp/ExportAudioOperation/OnExportFinished/XmpMetadataWriteStart=XMP 元数据无法保存到文件。"
"$$$/AuApp/ExportCDLayoutOperation/DirectoryWritableError=目标文件夹不可写。"
"$$$/AuApp/ExportMultitrackOperation/DirectoryWritableError=目标文件夹不可写。"
"$$$/AuApp/ExportMultitrackOperation/ErrorOpeningFile=无法开始写入到文件。"
"$$$/AuApp/RepairRenderOperation/DoProcess/TooBig=自动修复仅修补短小时长的音频缺陷。减少您选择的时间长度到大约 @0 秒（@1 采样点）或更少，然后再试。"
"$$$/AuApp/WaveAsset/ComformOperation/ReadError=匹配处理期间有错误发生：不能读取或解码文件。"
"$$$/AuApplication/AmioAssetFactory/AllFailed=文件不被当前已注册的任何插件支持。"
"$$$/AuApplication/AmioAssetFactory/AudioFilePostfix=_音频"
"$$$/AuApplication/AmioAssetFactory/CacheMetadata=缓存该文件的元数据资源失败。"
"$$$/AuApplication/AmioAssetFactory/GeneralErrorDlmsDead=The Dynamic Link Media Server process may be able to open this file, but it has failed to start.  Please try again later or reboot your machine to resolve any problems with the DLMS process.  If you would like to disable the use of DLMS, you can go to Preferences > Media & Disk Cache and disable the option \"Enable DLMS Format Support\"."
"$$$/AuApplication/AmioAssetFactory/GeneralErrorDlmsDisabled=If you would like to try using the Dynamic Link Media Server, please go to Preferences > Media & Disk Cache and enable the option \"Enable DLMS Format Support\" and try to open the file again."
"$$$/AuApplication/AmioAssetFactory/GeneralErrorDlmsRunning=We were unable to open this file using any of the currently available importers.  It is either corrupt or using an unsupported format."
"$$$/AuApplication/AmioAssetFactory/GeneralErrorDlmsStarting=The Dynamic Link Media Server process is still starting and cannot yet be used."
"$$$/AuApplication/AmioAssetFactory/GeneralErrorPreamble=We were unable to open this file using any of the currently available importers."
"$$$/AuApplication/AmioAssetFactory/GetSettings=获取该文件的元数据资源并设置信息失败。"
"$$$/AuApplication/AmioAssetFactory/MetadataTooLargeWarning=非音频数据超过 100 MB 将不被读取。"
"$$$/AuApplication/AmioAssetFactory/NoContent=此文件既不是视频也不是音频数据。"
"$$$/AuApplication/AmioAssetFactory/XmpReadWarning=文件中的元数据被发现，但已损坏，因而不能被读取。"
"$$$/AuApplication/AudioDeviceMessageHandler/DeviceListChanged=连接到操作系统的音频设备列表已被更改。您是否要打开音频硬件首选项？"
"$$$/AuApplication/AudioDeviceMessageHandler/DeviceListChangedRemoteSession=连接到系统的音频设备列表已被更改。您是否要打开音频硬件首选项？ 注：如果设备未显示或回放失败，请重启 Audition。"
"$$$/AuApplication/AudioDeviceState/AlertMessageStringLoadDefaultDevicesFailed=加载默认的输入与输出设备失败： @0 您是否打算检查 Audition 的音频硬件首选项？"
"$$$/AuApplication/AudioDeviceState/AlertMessageStringLoadDefaultOutputDeviceFailed=加载默认的输出设备失败。您是否打算检查 Audition 的音频硬件首选项？"
"$$$/AuApplication/AudioDeviceState/AlertMessageStringSettingsChanged=您的系统音频硬件设置已更改。您是否打算检查 Audition 的音频硬件首选项？"
"$$$/AuApplication/BatchProcess/Done=完成"
"$$$/AuApplication/BatchProcess/Processing=正在处理..."
"$$$/AuApplication/BatchProcess/Saving=正在存储..."
"$$$/AuApplication/BatchProcess/Waiting=正在写入..."
"$$$/AuApplication/DefaultFavorites/AutoHeal=自动修复"
"$$$/AuApplication/DefaultFavorites/ConvertTo5_1=转换为 5.1 声道"
"$$$/AuApplication/DefaultFavorites/ConvertToMono=转换为单声道"
"$$$/AuApplication/DefaultFavorites/ConvertToStereo=转换为立体声"
"$$$/AuApplication/DefaultFavorites/DeEsser=去除齿音"
"$$$/AuApplication/DefaultFavorites/FadeIn=淡入"
"$$$/AuApplication/DefaultFavorites/FadeOut=淡出"
"$$$/AuApplication/DefaultFavorites/HardLimit=强制限幅 -0.1 dB"
"$$$/AuApplication/DefaultFavorites/LowerPitch=降调"
"$$$/AuApplication/DefaultFavorites/NormalizeTo1dB=标准化 -0.1 dB"
"$$$/AuApplication/DefaultFavorites/NormalizeTo3dB=标准化 -3 dB"
"$$$/AuApplication/DefaultFavorites/RaisePitch=升调"
"$$$/AuApplication/DefaultFavorites/Remove60HzHum=移除 60 Hz 嗡嗡声"
"$$$/AuApplication/DefaultFavorites/RemoveVocals=移除人声"
"$$$/AuApplication/DefaultFavorites/RepairDCOffset=修复 DC 偏移"
"$$$/AuApplication/DefaultFavorites/TelephoneVoice=电话机通话声"
"$$$/AuApplication/DefaultFavorites/VoiceOverCompressor=旁白压限"
"$$$/AuApplication/LocStringTests/DictionaryTest1=Dictionary Test 1"
"$$$/AuApplication/MatchVolume/Amplifying=正在放大..."
"$$$/AuApplication/MatchVolume/Analyzing=正在分析..."
"$$$/AuApplication/MatchVolume/Done=完成 (@0 dB)"
"$$$/AuApplication/MatchVolume/HardLimiting=正在进行强制限幅..."
"$$$/AuApplication/MatchVolume/Saving=正在存储..."
"$$$/AuApplication/MatchVolume/Waiting=正在写入..."
"$$$/AuApplication/WaveDocument/ApplyAudioFadeIn=应用淡入"
"$$$/AuApplication/WaveDocument/ApplyAudioFadeInProgress=正在应用淡入..."
"$$$/AuApplication/WaveDocument/ApplyAudioFadeOut=应用淡出"
"$$$/AuApplication/WaveDocument/ApplyAudioFadeOutProgress=正在应用淡出..."
"$$$/AuApplication/WaveDocument/ApplyAudioFilter=应用 @0"
"$$$/AuApplication/WaveDocument/ApplyEffectsRack=应用效果架"
"$$$/AuApplication/WaveDocument/ApplyingAudioFilter=正在应用 @0..."
"$$$/AuApplication/WaveDocument/ApplyingEffectsRack=正在应用效果架..."
"$$$/AuApplication/WaveDocument/ExtractAudioFromCD/Description=从 CD 提取音频"
"$$$/AuApplication/WaveDocument/ExtractAudioFromCD/Progress=正在从 CD 提取音频..."
"$$$/AuApplication/WaveDocument/OpenAppend/Description=追加文件"
"$$$/AuApplication/WaveDocument/OpenAppend/Progress=正在追加文件..."
"$$$/AuAudioComponentsUI/AutoPitchCorrectXML/AttackTT=Governs how quickly to correct the pitch toward the scale tone"
"$$$/AuAudioComponentsUI/AutoPitchCorrectXML/Chromatic=Chromatic"
"$$$/AuAudioComponentsUI/AutoPitchCorrectXML/KeyTT=Sets the root note for the Scale parameter"
"$$$/AuAudioComponentsUI/AutoPitchCorrectXML/Major=Major"
"$$$/AuAudioComponentsUI/AutoPitchCorrectXML/Minor=Minor"
"$$$/AuAudioComponentsUI/AutoPitchCorrectXML/ScaleTT=Specifies the scale type (modality) of the root note"
"$$$/AuAudioComponentsUI/AutoPitchCorrectXML/SensitivityTT=Defines the threshold beyond which a note is no longer corrected"
"$$$/AuAudioComponentsUI/GenerateTonesXML/2ndChannelPhaseDiff=2nd Channel Phase Difference:"
"$$$/AuAudioComponentsUI/GenerateTonesXML/Amplitude=Amplitude:"
"$$$/AuAudioComponentsUI/GenerateTonesXML/BaseFrequency=Base Frequency:"
"$$$/AuAudioComponentsUI/GenerateTonesXML/BaseFrequencyTT=Specifies the main frequency to be used for generating tones."
"$$$/AuAudioComponentsUI/GenerateTonesXML/ChangeSpeed=Change Speed:"
"$$$/AuAudioComponentsUI/GenerateTonesXML/ChangeSpeedTT=Dynamically changes the relative phase between the two channels of a stereo audio file over time at a given rate."
"$$$/AuAudioComponentsUI/GenerateTonesXML/CompAmpTT=Volume level of each overtone component."
"$$$/AuAudioComponentsUI/GenerateTonesXML/CompFreqTT=Overtone Frequency"
"$$$/AuAudioComponentsUI/GenerateTonesXML/CompMultTT=Multiplies the Base Frequency by this number to determine the overtone Frequency."
"$$$/AuAudioComponentsUI/GenerateTonesXML/CopySettingsFromStart=Copy Settings from Start"
"$$$/AuAudioComponentsUI/GenerateTonesXML/CopyTT=Copies settings used in the Start tab to the End tab."
"$$$/AuAudioComponentsUI/GenerateTonesXML/DCOffset=DC Offset"
"$$$/AuAudioComponentsUI/GenerateTonesXML/DCOffsetTT=Adds a constant DC (Direct Current) amplitude to the tone."
"$$$/AuAudioComponentsUI/GenerateTonesXML/DeModulate=DeModulate"
"$$$/AuAudioComponentsUI/GenerateTonesXML/DegreeSymbol=°"
"$$$/AuAudioComponentsUI/GenerateTonesXML/Duration=Duration"
"$$$/AuAudioComponentsUI/GenerateTonesXML/Enable=Enable:"
"$$$/AuAudioComponentsUI/GenerateTonesXML/FrequencyComponents=Frequency Components"
"$$$/AuAudioComponentsUI/GenerateTonesXML/FrequencyRow=Frequency:"
"$$$/AuAudioComponentsUI/GenerateTonesXML/InverseSine=Inverse Sine"
"$$$/AuAudioComponentsUI/GenerateTonesXML/LogSweep=Log Sweep"
"$$$/AuAudioComponentsUI/GenerateTonesXML/LogSweepTT=When unchecked, performs a Linear frequency sweep between the settings of the Start and End tabs. When checked, performs a Logarithmic sweep between the Start and End tabs."
"$$$/AuAudioComponentsUI/GenerateTonesXML/Modulate=Modulate"
"$$$/AuAudioComponentsUI/GenerateTonesXML/ModulateByTT=Modulates the base frequency in pitch over a user defined range."
"$$$/AuAudioComponentsUI/GenerateTonesXML/ModulationDepth=Modulation Depth:"
"$$$/AuAudioComponentsUI/GenerateTonesXML/ModulationRate=Modulation Rate:"
"$$$/AuAudioComponentsUI/GenerateTonesXML/ModulationSpeedTT=Specifies the rate (times per second) at which the frequency modulates."
"$$$/AuAudioComponentsUI/GenerateTonesXML/Multiplier=Multiplier:"
"$$$/AuAudioComponentsUI/GenerateTonesXML/OverlapMix=Overlap (mix)"
"$$$/AuAudioComponentsUI/GenerateTonesXML/Phase=Phase"
"$$$/AuAudioComponentsUI/GenerateTonesXML/Replace=Replace"
"$$$/AuAudioComponentsUI/GenerateTonesXML/SecondChanPhaseDiffTT=Specifies the starting position 2nd channel of the waveforms cycle relative to the Start Phase parameter. Value: "
"$$$/AuAudioComponentsUI/GenerateTonesXML/Shape=Shape:"
"$$$/AuAudioComponentsUI/GenerateTonesXML/ShapeTT=Specifies the type of waveform to use."
"$$$/AuAudioComponentsUI/GenerateTonesXML/Sine=Sine"
"$$$/AuAudioComponentsUI/GenerateTonesXML/Square=Square"
"$$$/AuAudioComponentsUI/GenerateTonesXML/StartPhaseAt=Start Phase at:"
"$$$/AuAudioComponentsUI/GenerateTonesXML/StartPhaseTT=Specifies the starting position of the waveforms cycle. Value: "
"$$$/AuAudioComponentsUI/GenerateTonesXML/SweepFrequencies=Sweep Frequencies"
"$$$/AuAudioComponentsUI/GenerateTonesXML/SweepFrequenciesTT=Generates a tone that dynamically changes over time using the settings in the Start tab for the beginning of the sweep, to those settings in the End tab to conclude the sweep."
"$$$/AuAudioComponentsUI/GenerateTonesXML/TriangleSawtooth=Triangle/Sawtooth"
"$$$/AuAudioComponentsUI/GenerateTonesXML/Type=Type:"
"$$$/AuAudioComponentsUI/GenerateTonesXML/Volume=Volume"
"$$$/AuAudioComponentsUI/GenerateTonesXML/VolumeTT=Overall volume of the generated tones."
"$$$/AuAudioComponentsUI/GenerateTonesXML/Waveform=Waveform"
"$$$/AuAudioComponentsUI/GenerateTonesXML/WithSelectedAudio=with selected audio"
"$$$/AuBackEnd/AmioFileWrapper/SampleRatePlaybackWarning=Real-time playback and recording for this file is disabled as Audition only supports playback for files in the range of 6000 Hz to 192000 Hz"
"$$$/AuBackEnd/AmioFileWrapper/SampleRateTooHighError=This file cannot be read as it contains a sample rate over 10000000 Hz."
"$$$/AuBackEnd/AmioFileWrapper/SampleRateTooLowError=This file cannot be read as it contains a sample rate under 1 Hz."
"$$$/AuBackEnd/AmioFileWrapper/TooManyChannelsError=This file cannot be read as it contains more than 32 channels."
"$$$/AuBackEnd/AmioHost/AllowDialogsDuringOpen=This file requires user interaction in order to open successfully."
"$$$/AuBackEnd/AmioHost/FindPlugIn=Could not find the specified plug-in to open this file."
"$$$/AuBackEnd/AmioHost/GetSettingsError=Error reading format and settings information from the file.  This file cannot be read."
"$$$/AuBackEnd/AmioHost/InitEnd=Amio"
"$$$/AuBackEnd/AmioHost/InitStart=Amio"
"$$$/AuBackEnd/AmioHost/NoPlugIns=未安装 Amio 插件来打开该文件。"
"$$$/AuBackEnd/AmioPlugIn/Unknown=未知的 AMIO 插件错误"
"$$$/AuBackEnd/AmioPlugIn/kAmioInterfaceReturnCode_CorruptOrUnsupported=文件可能损坏或使用了不支持的格式"
"$$$/AuBackEnd/AmioPlugIn/kAmioInterfaceReturnCode_GeneralError=常规 AMIO 错误"
"$$$/AuBackEnd/AmioPlugIn/kAmioInterfaceReturnCode_NoSuchItem=一个请求被指定给了一个未知项目"
"$$$/AuBackEnd/AmioPlugIn/kAmioInterfaceReturnCode_ParameterOutOfRange=大小或其他参数超过了有效范围"
"$$$/AuBackEnd/AmioPlugIn/kAmioInterfaceReturnCode_PlugInException=插件生成异常"
"$$$/AuBackEnd/AmioPlugIn/kAmioInterfaceReturnCode_Success=没有错误"
"$$$/AuBackEnd/AmioPlugIn/kAmioInterfaceReturnCode_UnknownCommand=插件不能识别指定命令"
"$$$/AuBackEnd/AmioPlugIn/kAmioInterfaceReturnCode_UnsupportedCommand=插件不支持指定命令"
"$$$/AuBackEnd/AsyncOperation/BadAllocError=An error was encountered: Not enough memory to perform operation"
"$$$/AuBackEnd/AsyncOperation/WriteError=An error was encountered: Unable to write data to the temporary file system."
"$$$/AuBackEnd/AudioTrackGroup/Metronome=Metronome"
"$$$/AuBackEnd/BurnToCDOperation/BurnFailed=The CD failed to burn properly."
"$$$/AuBackEnd/BurnToCDOperation/BurningTrack=@0 CD Track @1..."
"$$$/AuBackEnd/BurnToCDOperation/ClosingCD=Closing CD..."
"$$$/AuBackEnd/BurnToCDOperation/PreparingCD=Preparing CD..."
"$$$/AuBackEnd/BurnToCDOperation/ProgressTypeBurning=Burning"
"$$$/AuBackEnd/BurnToCDOperation/ProgressTypeTestBurning=Test Burning"
"$$$/AuBackEnd/BurnToCDOperation/ProgressTypeVerifying=Verifying"
"$$$/AuBackEnd/BurnToCDOperation/TestFailed=The test burn failed."
"$$$/AuBackEnd/BurnToCDOperation/TestSuccess=The test burn was successful."
"$$$/AuBackEnd/BurnToCDOperation/VerifyFailed=Verification of the CD failed."
"$$$/AuBackEnd/BurnToCDOperation/VerifySuccess=The CD was burned and verified successfully."
"$$$/AuBackEnd/DlmsClient/DLMSFormat/AVIMovie=AVI Movie"
"$$$/AuBackEnd/DlmsClient/DLMSFormat/FLVFile=FLV"
"$$$/AuBackEnd/DlmsClient/DLMSFormat/MP3Audio=MP3 Audio"
"$$$/AuBackEnd/DlmsClient/DLMSFormat/MPEGMovie=MPEG Movie"
"$$$/AuBackEnd/DlmsClient/DLMSFormat/MPEGMovieAgain=MPEG Movie"
"$$$/AuBackEnd/DlmsClient/DLMSFormat/P2Movie=P2 Movie"
"$$$/AuBackEnd/DlmsClient/DLMSFormat/QuickTimeMovie=QuickTime Movie"
"$$$/AuBackEnd/DlmsClient/DLMSFormat/REDR3DRawFile=RED R3D Raw File"
"$$$/AuBackEnd/DlmsClient/DLMSFormat/ShockwaveFlashObjectFile=Shockwave flash object"
"$$$/AuBackEnd/DlmsClient/DLMSFormat/WindowsMedia=Windows Media"
"$$$/AuBackEnd/DlmsClient/DLMSFormat/XDCAMEXMovie=XDCAM-EX Movie"
"$$$/AuBackEnd/DlmsClient/DLMSFormat/XDCAMHDMovie=XDCAM-HD Movie"
"$$$/AuBackEnd/DlmsClient/HasNoAudio=No audio or video was found in this file."
"$$$/AuBackEnd/DlmsClient/MediaOffline=Media offline."
"$$$/AuBackEnd/DlmsClient/NotEnabled=DLMS support is disabled."
"$$$/AuBackEnd/DlmsClient/OpenCompletionTimeout=Timeout waiting for DLMS source to open."
"$$$/AuBackEnd/DlmsClient/OpenLaunch=Could not open this file."
"$$$/AuBackEnd/DlmsClient/UnexpectedSourceOpened=Open message received for unexpected source."
"$$$/AuBackEnd/DlmsReder/VideoFrameSizeFormat=@0 x @1"
"$$$/AuBackEnd/FrequencyAnalysis/Cents=cents"
"$$$/AuBackEnd/FrequencyAnalysis/NoFrequency=N/A"
"$$$/AuBackEnd/InjectXmpOperation/Error=There was a problem saving the metadata."
"$$$/AuBackEnd/Metronome/SoundType_African1=African 1"
"$$$/AuBackEnd/Metronome/SoundType_African2=African 2"
"$$$/AuBackEnd/Metronome/SoundType_Beeps=Beeps"
"$$$/AuBackEnd/Metronome/SoundType_Cymbals=Cymbals"
"$$$/AuBackEnd/Metronome/SoundType_Kit=Kit"
"$$$/AuBackEnd/Metronome/SoundType_Latin1=Latin 1"
"$$$/AuBackEnd/Metronome/SoundType_Latin2=Latin 2"
"$$$/AuBackEnd/Metronome/SoundType_Latin3=Latin 3"
"$$$/AuBackEnd/Metronome/SoundType_Sticks=Sticks"
"$$$/AuBackEnd/Metronome/SoundType_Tabla=Tabla"
"$$$/AuBackEnd/MixingEngine/AudioMonoTo51PannerComp/PanAngle=声相: 角度"
"$$$/AuBackEnd/MixingEngine/AudioMonoTo51PannerComp/PanRadius=声相: 半径"
"$$$/AuBackEnd/MixingEngine/AudioStereoPannerComp/Pan=声场"
"$$$/AuBackEnd/MixingEngine/AudioStereoTo51PannerComp/PanAngle=声相: 角度"
"$$$/AuBackEnd/MixingEngine/AudioStereoTo51PannerComp/PanCenter=声相: 中置"
"$$$/AuBackEnd/MixingEngine/AudioStereoTo51PannerComp/PanLFE=声相: 重低音"
"$$$/AuBackEnd/MixingEngine/AudioStereoTo51PannerComp/PanRadius=声相: 半径"
"$$$/AuBackEnd/MixingEngine/AudioStereoTo51PannerComp/PanStereoSpread=声相: 立体声扩展"
"$$$/AuBackEnd/MixingEngine/SendComponentParam/Level=电平"
"$$$/AuBackEnd/MixingEngine/SendComponentParam/Power=开/关"
"$$$/AuBackEnd/SessionHost/FindPlugIn=不能找到指定插件来打开该文件。"
"$$$/AuBackEnd/SessionHost/InitEnd=项目"
"$$$/AuBackEnd/SessionHost/InitStart=项目"
"$$$/AuBackEnd/SessionHost/NoPlugIns=没有已安装的项目插件用于打开此文件。"
"$$$/AuBackEnd/SessionPlugIn/Unknown=未知的项目插件错误"
"$$$/AuBackEnd/SessionPlugIn/kSessionInterfaceReturnCode_CorruptOrUnsupported=文件损坏或使用的是不支持格式"
"$$$/AuBackEnd/SessionPlugIn/kSessionInterfaceReturnCode_GeneralError=常规项目错误"
"$$$/AuBackEnd/SessionPlugIn/kSessionInterfaceReturnCode_NoSuchItem=一个请求被指定给未知项目"
"$$$/AuBackEnd/SessionPlugIn/kSessionInterfaceReturnCode_ParameterOutOfRange=大小或其他参数超出有效范围"
"$$$/AuBackEnd/SessionPlugIn/kSessionInterfaceReturnCode_PlugInException=插件生成异常"
"$$$/AuBackEnd/SessionPlugIn/kSessionInterfaceReturnCode_Success=没有错误"
"$$$/AuBackEnd/SessionPlugIn/kSessionInterfaceReturnCode_UnknownCommand=插件不能识别相关指定命令"
"$$$/AuBackEnd/SessionPlugIn/kSessionInterfaceReturnCode_UnsupportedCommand=插件不支持指定命令"
"$$$/AuBackend/MultitrackSequence/MasterTrack/MasterTrackDisplayName=主控"
"$$$/AuFrontEnd/ChannelsMenu/AllChannels=所有声道(&A)"
"$$$/AuFrontEnd/ExportMenu/ApplicationSettings=应用设置(&P)..."
"$$$/AuFrontEnd/ImportMenu/ApplicationSettings=应用设置(&A)..."
"$$$/AuFrontEnd/ImportMenu/File=文件(&F)..."
"$$$/AuFrontEnd/ImportMenu/RawData=Raw 数据(&R)..."
"$$$/AuFrontEnd/MeteringMenu/192dbRange=&120 dB 范围"
"$$$/AuFrontEnd/MeteringMenu/24dbRange=&24 dB 范围"
"$$$/AuFrontEnd/MeteringMenu/48dbRange=&48 dB 范围"
"$$$/AuFrontEnd/MeteringMenu/60dbRange=&60 dB 范围"
"$$$/AuFrontEnd/MeteringMenu/72dbRange=&72 dB 范围"
"$$$/AuFrontEnd/MeteringMenu/96dbRange=&96 dB 范围"
"$$$/AuFrontEnd/MeteringMenu/DynamicPeaks=动态峰值(&D)"
"$$$/AuFrontEnd/MeteringMenu/EnableInputMeter=信号输入表(&M)"
"$$$/AuFrontEnd/MeteringMenu/ResetIndicators=重置指示器(&R)"
"$$$/AuFrontEnd/MeteringMenu/ShowLEDMeters=显示 LED 表(&L)"
"$$$/AuFrontEnd/MeteringMenu/ShowMeterBarsGradient=显示颜色渐变(&G)"
"$$$/AuFrontEnd/MeteringMenu/ShowValleys=显示峰谷(&V)"
"$$$/AuFrontEnd/MeteringMenu/StaticPeaks=静态峰值(&P)"
"$$$/AuFrontEnd/OpenRecentMenu/ClearRecent=清除最近文件(&C)"
"$$$/AuFrontEnd/PreferencesMenu/AudioChannelMapping=音频声道映射(&C)..."
"$$$/AuFrontEnd/PreferencesMenu/AudioHardware=音频硬件(&A)..."
"$$$/AuFrontEnd/PreferencesMenu/ControlSurface=控制界面(&C)..."
"$$$/AuFrontEnd/PreferencesMenu/Data=数据(&D)..."
"$$$/AuFrontEnd/PreferencesMenu/Effects=效果(&E)..."
"$$$/AuFrontEnd/PreferencesMenu/General=常规(&G)..."
"$$$/AuFrontEnd/PreferencesMenu/MediaCache=媒体与暂存盘(&H)..."
"$$$/AuFrontEnd/PreferencesMenu/Metadata=标记与元数据(&K)..."
"$$$/AuFrontEnd/PreferencesMenu/Multitrack=多轨合成项目(&M)..."
"$$$/AuFrontEnd/PreferencesMenu/Playback=回放(&P)..."
"$$$/AuFrontEnd/PreferencesMenu/SpectralDisplay=频谱显示(&S)..."
"$$$/AuFrontEnd/PreferencesMenu/TimeDisplay=时间显示(&T)..."
"$$$/AuFrontEnd/PreferencesMenu/UserInterface=界面外观(&R)..."
"$$$/AuUI/Application/AppExpiredText=这份 @APPNAME 的预发布版本已经过期。"
"$$$/AuUI/Application/DoNotShowAgain=不再显示此警告"
"$$$/AuUI/ApplicationMenu/AboutAudition=关于 Audition(&A)..."
"$$$/AuUI/ApplicationMenu/AboutAuditionMac=关于 Audition..."
"$$$/AuUI/ApplicationMenu/AdaptiveNoiseReduction=自适应降噪(&A)..."
"$$$/AuUI/ApplicationMenu/Add51AudioTrack=添加 &5.1 声轨"
"$$$/AuUI/ApplicationMenu/Add51BusTrack=添加 5.1 总线声轨(&K)"
"$$$/AuUI/ApplicationMenu/AddMonoAudioTrack=添加单声道轨(&M)"
"$$$/AuUI/ApplicationMenu/AddMonoBusTrack=添加单声道总线声轨(&B)"
"$$$/AuUI/ApplicationMenu/AddStereoAudioTrack=添加立体声轨(&S)"
"$$$/AuUI/ApplicationMenu/AddStereoBusTrack=添加立体声总线声轨(&U)"
"$$$/AuUI/ApplicationMenu/AddVideoTrack=添加视频轨(&V)"
"$$$/AuUI/ApplicationMenu/AdjustLeftSideToLeft=从左侧向左调节(&L)"
"$$$/AuUI/ApplicationMenu/AdjustLeftSideToRight=从左侧向右调节(&E)"
"$$$/AuUI/ApplicationMenu/AdjustRightSideToLeft=从右侧向左调节(&G)"
"$$$/AuUI/ApplicationMenu/AdjustRightSideToRight=从右侧向右调节(&R)"
"$$$/AuUI/ApplicationMenu/AdjustSelectionInward=选区向内调节(&I)"
"$$$/AuUI/ApplicationMenu/AdjustSelectionOutward=选区向外调节(&O)"
"$$$/AuUI/ApplicationMenu/AlignWithRubbaDub=自动语音对齐..."
"$$$/AuUI/ApplicationMenu/Amplify=增幅(&A)..."
"$$$/AuUI/ApplicationMenu/AmplitudeAndCompression=振幅与压限(&A)"
"$$$/AuUI/ApplicationMenu/AmplitudeStatistics=振幅统计(&A)"
"$$$/AuUI/ApplicationMenu/AnalogDelayEffect=模拟延迟(&A)..."
"$$$/AuUI/ApplicationMenu/Analysis=修复(&G)"
"$$$/AuUI/ApplicationMenu/AnalysisEffects=修复(&D)"
"$$$/AuUI/ApplicationMenu/AudioWithinRangeMarkers=音频范围内的标记(&A)..."
"$$$/AuUI/ApplicationMenu/AutoClickRemover=自动咔嗒声移除(&C)..."
"$$$/AuUI/ApplicationMenu/AutoHealSelection=自动修复选区(&H)"
"$$$/AuUI/ApplicationMenu/AutoPhaseCorrection=自动相位校正(&P)..."
"$$$/AuUI/ApplicationMenu/AutomaticCrossfadesEnabled=启用自动淡化(&B)"
"$$$/AuUI/ApplicationMenu/BarsAndBeats=小节与节拍(&B)"
"$$$/AuUI/ApplicationMenu/BatchProcess=批处理(&B)"
"$$$/AuUI/ApplicationMenu/BounceToNewTrack=内部缩混到新建声轨(&B)"
"$$$/AuUI/ApplicationMenu/BounceToNewTrackEntireTrack=已选中声轨(&T)"
"$$$/AuUI/ApplicationMenu/BounceToNewTrackSelectedClipsInTimeSel=时间选区内已选中的素材(&S)"
"$$$/AuUI/ApplicationMenu/BounceToNewTrackSelectedClipsOnly=仅选中素材(&C)"
"$$$/AuUI/ApplicationMenu/BounceToNewTrackTimeSelection=时间选区(&M)"
"$$$/AuUI/ApplicationMenu/BurnAudio=刻录音频到CD..."
"$$$/AuUI/ApplicationMenu/CaptureNoiseReductionProfile=采集噪声样本(&C)"
"$$$/AuUI/ApplicationMenu/CenterChannelExtractEffect=提取中置声道(&C)..."
"$$$/AuUI/ApplicationMenu/ChangeMetronomeSound=更改声音类型(&C)"
"$$$/AuUI/ApplicationMenu/ChangeStretchModeOff=关闭(&O)"
"$$$/AuUI/ApplicationMenu/ChangeStretchModeRealtime=实时(&R)"
"$$$/AuUI/ApplicationMenu/ChangeStretchModeRendered=渲染(&D)"
"$$$/AuUI/ApplicationMenu/ChannelMixerEffect=声道混合(&C)..."
"$$$/AuUI/ApplicationMenu/Channels=启用声道(&H)"
"$$$/AuUI/ApplicationMenu/ChorusEffect=和声(&C)..."
"$$$/AuUI/ApplicationMenu/ChorusFlangerEffect=和声/镶边(&H)..."
"$$$/AuUI/ApplicationMenu/ClearEffectsRack=清除效果架"
"$$$/AuUI/ApplicationMenu/ClearTimeSelection=清除时间选区(&C)"
"$$$/AuUI/ApplicationMenu/ClickPopEliminator=去除咔嗒声（破坏性处理）(&D)"
"$$$/AuUI/ApplicationMenu/Clip=素材(&C)"
"$$$/AuUI/ApplicationMenu/ClipColor=素材/编组颜色(&C)..."
"$$$/AuUI/ApplicationMenu/ClipFades/Asymmetrical=非对称(&A)"
"$$$/AuUI/ApplicationMenu/ClipFades/Cosine=余弦(&S)"
"$$$/AuUI/ApplicationMenu/ClipFades/Crossfade=淡入淡出(&C)"
"$$$/AuUI/ApplicationMenu/ClipFades/FadeIn=淡入(&F)"
"$$$/AuUI/ApplicationMenu/ClipFades/FadeOut=淡出(&F)"
"$$$/AuUI/ApplicationMenu/ClipFades/Linear=线性(&L)"
"$$$/AuUI/ApplicationMenu/ClipFades/NoFade=不淡化(&N)"
"$$$/AuUI/ApplicationMenu/ClipFades/Symmetrical=对称(&Y)"
"$$$/AuUI/ApplicationMenu/ClipGain=素材增益(&L)"
"$$$/AuUI/ApplicationMenu/ClipRename=重命名(&R)"
"$$$/AuUI/ApplicationMenu/ClipRestoration=削波修复（破坏性处理）(&P)"
"$$$/AuUI/ApplicationMenu/ClipStretchMode=伸缩模式"
"$$$/AuUI/ApplicationMenu/ClipStretchingEnabled=启用全局素材伸缩(&E)"
"$$$/AuUI/ApplicationMenu/Clipboard1=剪贴板 1 (&1)"
"$$$/AuUI/ApplicationMenu/Clipboard2=剪贴板 2 (&2)"
"$$$/AuUI/ApplicationMenu/Clipboard3=剪贴板 3 (&3)"
"$$$/AuUI/ApplicationMenu/Clipboard4=剪贴板 4 (&4)"
"$$$/AuUI/ApplicationMenu/Clipboard5=剪贴板 5 (&5)"
"$$$/AuUI/ApplicationMenu/Close=关闭(&C)"
"$$$/AuUI/ApplicationMenu/CloseAll=全部关闭(&L)"
"$$$/AuUI/ApplicationMenu/CloseSessionAndItsMedia=关闭项目(&M)"
"$$$/AuUI/ApplicationMenu/CloseUnusedMedia=关闭未使用的媒体(&U)"
"$$$/AuUI/ApplicationMenu/CompactDisc=激光唱片 &75 fps"
"$$$/AuUI/ApplicationMenu/ConvertSampleType=转换采样类型(&V)..."
"$$$/AuUI/ApplicationMenu/ConvertToUniqueCopy=转换为唯一拷贝(&Q)"
"$$$/AuUI/ApplicationMenu/ConvolutionReverbEffect=卷积混响(&C)..."
"$$$/AuUI/ApplicationMenu/Copy=复制(&Y)"
"$$$/AuUI/ApplicationMenu/CopyToNew=复制为新文件(&N)"
"$$$/AuUI/ApplicationMenu/Crop=裁剪(&C)"
"$$$/AuUI/ApplicationMenu/CustomFPS=自定义 FPS(&C)"
"$$$/AuUI/ApplicationMenu/Cut=剪切(&T)"
"$$$/AuUI/ApplicationMenu/DeEsserEffect=去除齿音(&D)..."
"$$$/AuUI/ApplicationMenu/DeHummerEffect=去除嗡嗡声(&D)..."
"$$$/AuUI/ApplicationMenu/Decimal=十进制(&M) (mm:ss.ddd)"
"$$$/AuUI/ApplicationMenu/DelayEcho=延迟与回声(&L)"
"$$$/AuUI/ApplicationMenu/DelayEffect=延迟(&D)..."
"$$$/AuUI/ApplicationMenu/Delete=删除(&D)"
"$$$/AuUI/ApplicationMenu/DeleteSelectedTrack=删除选中轨道(&D)"
"$$$/AuUI/ApplicationMenu/DeleteSilence=删除静音（破坏性处理）(&S)"
"$$$/AuUI/ApplicationMenu/DeleteWorkspace=删除工作区(&D)..."
"$$$/AuUI/ApplicationMenu/DeselectAll=取消全选(&D)"
"$$$/AuUI/ApplicationMenu/DistortionEffect=失真(&D)..."
"$$$/AuUI/ApplicationMenu/DopplerEffect=多普勒频移（破坏性处理）(&S)..."
"$$$/AuUI/ApplicationMenu/DuplicateTrack=复制已选中轨道(&C)"
"$$$/AuUI/ApplicationMenu/Dynamics=动态处理(&Y)..."
"$$$/AuUI/ApplicationMenu/EchoEffect=回声(&E)..."
"$$$/AuUI/ApplicationMenu/Edit=编辑(&E)"
"$$$/AuUI/ApplicationMenu/EditBatchProcess=批处理(&B)"
"$$$/AuUI/ApplicationMenu/EditClipEffects=编辑效果架内的素材效果(&F)"
"$$$/AuUI/ApplicationMenu/EditClipStretch=伸缩"
"$$$/AuUI/ApplicationMenu/EditCustomFrameRate=编辑自定义帧速率(&R)..."
"$$$/AuUI/ApplicationMenu/EditInsert=插入(&I)"
"$$$/AuUI/ApplicationMenu/EditInsertIntoCD=整个文件到CD布局中(&C)"
"$$$/AuUI/ApplicationMenu/EditInsertIntoMT=到多轨项目中(&I)"
"$$$/AuUI/ApplicationMenu/EditMetronomePattern=编辑样式(&P)..."
"$$$/AuUI/ApplicationMenu/EditOriginal=编辑原始资源(&O)"
"$$$/AuUI/ApplicationMenu/EditSelect=选择(&S)"
"$$$/AuUI/ApplicationMenu/EditShortcuts=键盘快捷键(&K)..."
"$$$/AuUI/ApplicationMenu/EditSnapping=吸附(&G)"
"$$$/AuUI/ApplicationMenu/EditSourceFile=编辑源文件(&F)"
"$$$/AuUI/ApplicationMenu/EditTempo=编辑节拍(&T)..."
"$$$/AuUI/ApplicationMenu/EditTrackEffects=编辑效果架内的声轨效果(&T)"
"$$$/AuUI/ApplicationMenu/EditZeroCrossing=零交叉(&Z)"
"$$$/AuUI/ApplicationMenu/Editor=编辑(&E)"
"$$$/AuUI/ApplicationMenu/Effects=效果(&S)"
"$$$/AuUI/ApplicationMenu/Effects/AU=AU"
"$$$/AuUI/ApplicationMenu/Effects/AudioPluginManager=音频插件管理器(&P)..."
"$$$/AuUI/ApplicationMenu/Effects/VST=&VST"
"$$$/AuUI/ApplicationMenu/Effects/VST3=&VST 3"
"$$$/AuUI/ApplicationMenu/EffectsMenu/MatchVolume=匹配音量(&M)"
"$$$/AuUI/ApplicationMenu/EffectsRack=效果架(&K)"
"$$$/AuUI/ApplicationMenu/EnableClipKeyframeEditing=启用关键帧编辑(&G)"
"$$$/AuUI/ApplicationMenu/EnableMetronome=启用节拍器(&E)"
"$$$/AuUI/ApplicationMenu/Exit=退出(&X)"
"$$$/AuUI/ApplicationMenu/Export=导出(&E)"
"$$$/AuUI/ApplicationMenu/ExportFile=文件(&F)..."
"$$$/AuUI/ApplicationMenu/ExportFinalCut=&FCP XML 交换格式..."
"$$$/AuUI/ApplicationMenu/ExportMultitrackMixdownAll=整个项目(&E)..."
"$$$/AuUI/ApplicationMenu/ExportMultitrackMixdownSelection=时间选区(&T)..."
"$$$/AuUI/ApplicationMenu/ExportOMF=&OMF..."
"$$$/AuUI/ApplicationMenu/ExportPremiereSequence=导出到 Adobe Premiere Pro(&X)..."
"$$$/AuUI/ApplicationMenu/ExportSession=项目(&S)..."
"$$$/AuUI/ApplicationMenu/ExtractAudioFromCD=从 CD 中提取音频(&D)..."
"$$$/AuUI/ApplicationMenu/FFTFilter=FFT 滤波(&F)..."
"$$$/AuUI/ApplicationMenu/FadeEnvelopeProcess=淡化包络（破坏性处理）(&F)..."
"$$$/AuUI/ApplicationMenu/FadeIn=淡入(&I)"
"$$$/AuUI/ApplicationMenu/FadeOut=淡出(&O)"
"$$$/AuUI/ApplicationMenu/Favorites=收藏夹(&R)"
"$$$/AuUI/ApplicationMenu/File=文件(&F)"
"$$$/AuUI/ApplicationMenu/Files=文件(&F)"
"$$$/AuUI/ApplicationMenu/Filter=滤波与均衡(&Q)"
"$$$/AuUI/ApplicationMenu/FlangerEffect=镶边(&F)..."
"$$$/AuUI/ApplicationMenu/FrequencyAnalysis=频率分析(&Q)"
"$$$/AuUI/ApplicationMenu/FullReverbEffect=完整混响(&F)..."
"$$$/AuUI/ApplicationMenu/GainEnvelopeProcess=增益包络（破坏性处理）(&G)..."
"$$$/AuUI/ApplicationMenu/GenerateTones=生成音色(&G)..."
"$$$/AuUI/ApplicationMenu/GraphicEQ10Bands=图形均衡器 (&10 段)..."
"$$$/AuUI/ApplicationMenu/GraphicEQ20Bands=图形均衡器 (&20 段)..."
"$$$/AuUI/ApplicationMenu/GraphicEQ30Bands=图形均衡器 (&30 段)..."
"$$$/AuUI/ApplicationMenu/GraphicPhaseShifter=图形移相器(&G)..."
"$$$/AuUI/ApplicationMenu/GroupClips=编组素材(&G)"
"$$$/AuUI/ApplicationMenu/Groups=编组"
"$$$/AuUI/ApplicationMenu/GuitarSuiteEffect=吉他套件(&G)..."
"$$$/AuUI/ApplicationMenu/HardLimit=强制限幅(&H)..."
"$$$/AuUI/ApplicationMenu/HealingBrush=污点修复刷(&H)"
"$$$/AuUI/ApplicationMenu/Help=帮助(&H)"
"$$$/AuUI/ApplicationMenu/Help/APIP=Adobe 产品改进计划(&P)..."
"$$$/AuUI/ApplicationMenu/Help/AuditionHelp=Adobe Audition 帮助(&H)..."
"$$$/AuUI/ApplicationMenu/Help/Download=下载音效与更多内容(&D)..."
"$$$/AuUI/ApplicationMenu/Help/Facebook=加我们的Facebook好友(&F)..."
"$$$/AuUI/ApplicationMenu/Help/PrereleaseUserForum=Adobe Audition 用户论坛(&U)..."
"$$$/AuUI/ApplicationMenu/Help/Twitter=我们的Twitter求粉(&T)..."
"$$$/AuUI/ApplicationMenu/Help/UserForum=Adobe Audition 支持中心(&S)..."
"$$$/AuUI/ApplicationMenu/HissReductionProcess=削减嘶声（破坏性处理）(&H)..."
"$$$/AuUI/ApplicationMenu/History=历史(&H)"
"$$$/AuUI/ApplicationMenu/Import=导入(&I)"
"$$$/AuUI/ApplicationMenu/InsertFile=插入文件(&I)..."
"$$$/AuUI/ApplicationMenu/InsertSilence=插入静音(&S)..."
"$$$/AuUI/ApplicationMenu/InterpretSampleRate=解释采样率(&E)..."
"$$$/AuUI/ApplicationMenu/IntraClip=语音音量电平(&P)..."
"$$$/AuUI/ApplicationMenu/Invert=反转(&I)"
"$$$/AuUI/ApplicationMenu/LassoSelect=套索选择(&L)"
"$$$/AuUI/ApplicationMenu/LevelMeters=电平表(&L)"
"$$$/AuUI/ApplicationMenu/LinkAllMedia=链接所有媒体(&A)..."
"$$$/AuUI/ApplicationMenu/LinkMedia=链接媒体(&D)..."
"$$$/AuUI/ApplicationMenu/LockInTime=锁定时间(&K)"
"$$$/AuUI/ApplicationMenu/Loop=循环(&P)"
"$$$/AuUI/ApplicationMenu/MarkAudio=标记音频（破坏性处理）(&M)"
"$$$/AuUI/ApplicationMenu/Marker=标记(&M)"
"$$$/AuUI/ApplicationMenu/Markers=标记(&M)"
"$$$/AuUI/ApplicationMenu/MarqueeSelect=合并选择(&E)"
"$$$/AuUI/ApplicationMenu/MatchClipVolume=匹配素材音量(&V)..."
"$$$/AuUI/ApplicationMenu/MediaBrowser=媒体浏览器(&M)"
"$$$/AuUI/ApplicationMenu/Metadata=元数据(&M)"
"$$$/AuUI/ApplicationMenu/Metering=仪表(&G)"
"$$$/AuUI/ApplicationMenu/Metronome=节拍器(&E)"
"$$$/AuUI/ApplicationMenu/MetronomeSoundAfrican1=African 1"
"$$$/AuUI/ApplicationMenu/MetronomeSoundAfrican2=African 2"
"$$$/AuUI/ApplicationMenu/MetronomeSoundBeeps=Beeps"
"$$$/AuUI/ApplicationMenu/MetronomeSoundCymbals=Cymbals"
"$$$/AuUI/ApplicationMenu/MetronomeSoundKit=Kit"
"$$$/AuUI/ApplicationMenu/MetronomeSoundLatin1=Latin 1"
"$$$/AuUI/ApplicationMenu/MetronomeSoundLatin2=Latin 2"
"$$$/AuUI/ApplicationMenu/MetronomeSoundLatin3=Latin 3"
"$$$/AuUI/ApplicationMenu/MetronomeSoundSticks=Sticks"
"$$$/AuUI/ApplicationMenu/MetronomeSoundTabla=Tabla"
"$$$/AuUI/ApplicationMenu/Minimize=最小化(&E)"
"$$$/AuUI/ApplicationMenu/MixPaste=混合式粘贴(&X)..."
"$$$/AuUI/ApplicationMenu/MixdownAll=整个项目(&E)"
"$$$/AuUI/ApplicationMenu/MixdownSelection=时间选区(&S)"
"$$$/AuUI/ApplicationMenu/MixdownToNewFile=缩混为新文件(&M)"
"$$$/AuUI/ApplicationMenu/Mixer=调音台(&X)"
"$$$/AuUI/ApplicationMenu/Modulation=调制(&U)"
"$$$/AuUI/ApplicationMenu/Move=移动(&M)"
"$$$/AuUI/ApplicationMenu/MultiBandCompressorEffect=多段压限(&M)..."
"$$$/AuUI/ApplicationMenu/Multitrack=多轨合成(&M)"
"$$$/AuUI/ApplicationMenu/Multitrack/Track=轨道(&T)"
"$$$/AuUI/ApplicationMenu/Mute=静音(&M)"
"$$$/AuUI/ApplicationMenu/New=新建(&N)"
"$$$/AuUI/ApplicationMenu/NewWorkspace=新建工作区(&N)..."
"$$$/AuUI/ApplicationMenu/NoiseReductionProcess=降噪（破坏性处理）(&N)..."
"$$$/AuUI/ApplicationMenu/NoiseReductionRestoration=降噪/修复(&N)"
"$$$/AuUI/ApplicationMenu/Normalize=标准化（破坏性处理）(&N)..."
"$$$/AuUI/ApplicationMenu/NotchFilter=陷波滤波器(&N)..."
"$$$/AuUI/ApplicationMenu/NudgeLeft=向左微移(&E)"
"$$$/AuUI/ApplicationMenu/NudgeRight=向右微移(&H)"
"$$$/AuUI/ApplicationMenu/Open=打开(&O)..."
"$$$/AuUI/ApplicationMenu/OpenAppend=追加打开"
"$$$/AuUI/ApplicationMenu/OpenAppendToCurrent=到当前文件(&C)..."
"$$$/AuUI/ApplicationMenu/OpenAppendToNew=到新文件(&N)..."
"$$$/AuUI/ApplicationMenu/OpenRecent=打开最近文件(&R)"
"$$$/AuUI/ApplicationMenu/PaintbrushSelection=笔刷选择(&P)"
"$$$/AuUI/ApplicationMenu/ParametricEQ=参数均衡(&P)..."
"$$$/AuUI/ApplicationMenu/Paste=粘贴(&A)"
"$$$/AuUI/ApplicationMenu/PasteToNew=粘贴为新文件(&W)"
"$$$/AuUI/ApplicationMenu/PhaseMeter=相位表(&P)"
"$$$/AuUI/ApplicationMenu/PhaserEffect=相位(&P)..."
"$$$/AuUI/ApplicationMenu/PitchCorrectEffect=自动音高修正(&A)..."
"$$$/AuUI/ApplicationMenu/PitchCorrectManualEffect=手动音高修正（破坏性处理）(&M)..."
"$$$/AuUI/ApplicationMenu/PlayOverlappedPortionsOfClips=播放素材的重叠部分(&V)"
"$$$/AuUI/ApplicationMenu/Playlist=播放列表(&Y)"
"$$$/AuUI/ApplicationMenu/Preferences=首选项(&P)"
"$$$/AuUI/ApplicationMenu/PreferencesWin=首选项(&F)"
"$$$/AuUI/ApplicationMenu/Properties=属性(&O)"
"$$$/AuUI/ApplicationMenu/Razor=切割(&R)"
"$$$/AuUI/ApplicationMenu/RealtimeAllStretchedClips=实时处理全部伸缩素材(&R)"
"$$$/AuUI/ApplicationMenu/Redo=重做(&R)"
"$$$/AuUI/ApplicationMenu/RemoveFocusClipFromGroup=从编组移除焦点素材(&F)"
"$$$/AuUI/ApplicationMenu/RenderAllStretchedClips=渲染全部伸缩素材(&D)"
"$$$/AuUI/ApplicationMenu/RepeatLastCommand=重复执行上次的操作(&L)"
"$$$/AuUI/ApplicationMenu/RevealClipsInFilesPanelCmd=在文件面板显示素材(&V)"
"$$$/AuUI/ApplicationMenu/RevealExplorer=在资源管理器中显示(&P)"
"$$$/AuUI/ApplicationMenu/RevealFinder=在 Finder 中显示(&F)"
"$$$/AuUI/ApplicationMenu/RevealInMediaBrowser=在媒体浏览器中显示(&M)"
"$$$/AuUI/ApplicationMenu/Reverb=混响(&B)"
"$$$/AuUI/ApplicationMenu/ReverbEffect=混响(&B)..."
"$$$/AuUI/ApplicationMenu/Reverse=前后反向(&R)"
"$$$/AuUI/ApplicationMenu/RevertWorkspaceDefault=重置工作区(&R)"
"$$$/AuUI/ApplicationMenu/RippleDelete=波纹删除(&P)"
"$$$/AuUI/ApplicationMenu/RippleDelete/SelectedClips=已选中素材(&C)"
"$$$/AuUI/ApplicationMenu/RippleDelete/TimeSelection=已选中声轨内的时间选区(&S)"
"$$$/AuUI/ApplicationMenu/RippleDelete/TimeSelectionAllTracks=所有轨道内的时间选区(&T)"
"$$$/AuUI/ApplicationMenu/RippleDelete/TimeSelectionInSelectedClips=已选中素材内的时间选区(&M)"
"$$$/AuUI/ApplicationMenu/SMPTE23976fpsTimeFormat=SMPTE &23.976 fps"
"$$$/AuUI/ApplicationMenu/SMPTE5994fpsDrop=SMPTE &59.94 fps 丢帧"
"$$$/AuUI/ApplicationMenu/SMPTE5994fpsTimeFormat=SMPTE &59.94 fps"
"$$$/AuUI/ApplicationMenu/Samples=采样(&S)"
"$$$/AuUI/ApplicationMenu/Save=保存(&S)"
"$$$/AuUI/ApplicationMenu/SaveAll=全部保存(&V)"
"$$$/AuUI/ApplicationMenu/SaveAllAudioAs=以批处理保存全部音频(&B)..."
"$$$/AuUI/ApplicationMenu/SaveAs=另存为(&A)..."
"$$$/AuUI/ApplicationMenu/SaveSelectionAs=保存选中为(&T)..."
"$$$/AuUI/ApplicationMenu/SelectAll=全选(&A)"
"$$$/AuUI/ApplicationMenu/SelectAllClipsInSelectedTrack=已选中声轨内的全部素材(&C)"
"$$$/AuUI/ApplicationMenu/SelectAllTime=时间全选(&L)"
"$$$/AuUI/ApplicationMenu/SelectClipsToEndOfSelectedTrack=选择已选中声轨至结束的素材(&E)"
"$$$/AuUI/ApplicationMenu/SelectCurrentViewTime=选择当前视图时间(&V)"
"$$$/AuUI/ApplicationMenu/SelectNextClipInSelectedTrack=选择已选中声轨内下一个素材(&N)"
"$$$/AuUI/ApplicationMenu/SelectionView=选区/视图控制(&S)"
"$$$/AuUI/ApplicationMenu/SendClipToBack=素材置为底层"
"$$$/AuUI/ApplicationMenu/SetCurrentClipboard=设置当前剪贴板(&B)"
"$$$/AuUI/ApplicationMenu/ShowEffectsRack=显示效果架(&W)"
"$$$/AuUI/ApplicationMenu/Silence=静音(&S)"
"$$$/AuUI/ApplicationMenu/SimpleMasteringEffect=母带处理(&M)..."
"$$$/AuUI/ApplicationMenu/SingleBandCompressorEffect=单段压限(&S)..."
"$$$/AuUI/ApplicationMenu/Slip=滑动(&I)"
"$$$/AuUI/ApplicationMenu/Smpte24=SMPTE 24 fps (胶片)"
"$$$/AuUI/ApplicationMenu/Smpte25=SMPTE 25 fps (欧广联标准)"
"$$$/AuUI/ApplicationMenu/Smpte2997=SMPTE &29.97 fps"
"$$$/AuUI/ApplicationMenu/Smpte30=SMPTE &30 fps"
"$$$/AuUI/ApplicationMenu/SmpteDrop=SMPTE 丢帧 (29.97 fps)"
"$$$/AuUI/ApplicationMenu/SnapToMarkers=吸附到标记(&M)"
"$$$/AuUI/ApplicationMenu/SnapToRulerCoarse=吸附到标尺（粗略）(&R)"
"$$$/AuUI/ApplicationMenu/SnapToRulerFine=吸附到标尺（精细）(&I)"
"$$$/AuUI/ApplicationMenu/SnappingEnabled=启用(&E)"
"$$$/AuUI/ApplicationMenu/Special=特殊效果(&C)"
"$$$/AuUI/ApplicationMenu/Split=拆分(&S)"
"$$$/AuUI/ApplicationMenu/SplitTomono=提取声道为单声道文件(&X)"
"$$$/AuUI/ApplicationMenu/StatusBar=状态栏(&U)"
"$$$/AuUI/ApplicationMenu/StereoImagery=立体声声像(&O)"
"$$$/AuUI/ApplicationMenu/StretchEffect=伸缩与变调（破坏性处理）(&S)..."
"$$$/AuUI/ApplicationMenu/StretchProperties=伸缩属性(&P)..."
"$$$/AuUI/ApplicationMenu/StudioReverb=室内混响(&S)..."
"$$$/AuUI/ApplicationMenu/SurroundReverb=环绕声混响(&R)..."
"$$$/AuUI/ApplicationMenu/SuspendGrouping=挂起编组"
"$$$/AuUI/ApplicationMenu/SyncWithTimePrefs=与时间显示首选项同步(&Z)"
"$$$/AuUI/ApplicationMenu/Time=时间(&I)"
"$$$/AuUI/ApplicationMenu/TimeAndPitch=时间与变调(&E)"
"$$$/AuUI/ApplicationMenu/TimeDisplay=时间显示(&Y)"
"$$$/AuUI/ApplicationMenu/TimeSelect=时间选区(&S)"
"$$$/AuUI/ApplicationMenu/ToggleColoredChannels=个性化着色(&U)"
"$$$/AuUI/ApplicationMenu/ToggleLayeredChannels=层叠(&L)"
"$$$/AuUI/ApplicationMenu/TogglePitchDisplay=频谱音高显示(&L)"
"$$$/AuUI/ApplicationMenu/ToggleSnapToClips=吸附到素材(&C)"
"$$$/AuUI/ApplicationMenu/ToggleSnapToFrames=吸附到帧(&F)"
"$$$/AuUI/ApplicationMenu/ToggleSnapToLoops=吸附到循环(&L)"
"$$$/AuUI/ApplicationMenu/ToggleSnapToZeroCrossings=吸附到零交叉(&Z)"
"$$$/AuUI/ApplicationMenu/ToggleSpectralDisplay=频谱频率显示(&S)"
"$$$/AuUI/ApplicationMenu/Tools=工具(&T)"
"$$$/AuUI/ApplicationMenu/ToolsPanel=工具(&T)"
"$$$/AuUI/ApplicationMenu/TrackPanner=声轨声相(&N)"
"$$$/AuUI/ApplicationMenu/Transport=走带(&R)"
"$$$/AuUI/ApplicationMenu/TrimToTimeSelection=修剪到时间选区(&T)"
"$$$/AuUI/ApplicationMenu/TubeModeledCompressorEffect=电子管压限(&T)..."
"$$$/AuUI/ApplicationMenu/Undo=撤销(&U)"
"$$$/AuUI/ApplicationMenu/UngroupSelectedClips=解散已选中素材"
"$$$/AuUI/ApplicationMenu/Video=视频(&V)"
"$$$/AuUI/ApplicationMenu/View=视图(&V)"
"$$$/AuUI/ApplicationMenu/View/CD=CD编辑器(&C)"
"$$$/AuUI/ApplicationMenu/View/EditorControls=显示编辑器面板控制(&T)"
"$$$/AuUI/ApplicationMenu/View/HUD=显示 HUD(&H)"
"$$$/AuUI/ApplicationMenu/View/Multitrack=多轨编辑器(&M)"
"$$$/AuUI/ApplicationMenu/View/ShowClipEffectEnv=显示素材效果包络(&E)"
"$$$/AuUI/ApplicationMenu/View/ShowClipPanEnv=显示素材声相包络(&P)"
"$$$/AuUI/ApplicationMenu/View/ShowClipVolEnv=显示素材音量包络(&V)"
"$$$/AuUI/ApplicationMenu/View/Waveform=波形编辑器(&W)"
"$$$/AuUI/ApplicationMenu/ViewVideoDisplay=视频显示(&D)"
"$$$/AuUI/ApplicationMenu/ViewWaveformChannels=波形声道(&N)"
"$$$/AuUI/ApplicationMenu/VocalEnhancerEffect=人声增强(&V)..."
"$$$/AuUI/ApplicationMenu/Window=窗口(&W)"
"$$$/AuUI/ApplicationMenu/WindowMenu/MatchVolume=匹配音量(&U)"
"$$$/AuUI/ApplicationMenu/Workspace=工作区(&W)"
"$$$/AuUI/ApplicationMenu/Zoom=缩放(&Z)"
"$$$/AuUI/ApplicationMenu/ZoomIn=放大（时间）(&I)"
"$$$/AuUI/ApplicationMenu/ZoomOut=缩小（时间）(&O)"
"$$$/AuUI/ApplicationMenu/ZoomOutFull=全部缩小（所有坐标）(&F)"
"$$$/AuUI/ApplicationMenu/ZoomReset=重置缩放（时间）(&R)"
"$$$/AuUI/AudioChannelMappingPrefsPage/None=无"
"$$$/AuUI/ClipPropertiesView/ClipGain=素材增益"
"$$$/AuUI/ControlSurfaceButtonAssignmentDialog/AvailableHostCommands=Available Host Commands:"
"$$$/AuUI/ControlSurfaceButtonAssignmentDialog/ButtonAssignments=Button Assignments:"
"$$$/AuUI/ControlSurfaceButtonAssignmentDialog/Cancel=Cancel"
"$$$/AuUI/ControlSurfaceButtonAssignmentDialog/ConfigDialog/ButtonHeaderRow=Button"
"$$$/AuUI/ControlSurfaceButtonAssignmentDialog/ConfigDialog/HostCommandDescriptionHeaderRow=Description"
"$$$/AuUI/ControlSurfaceButtonAssignmentDialog/ConfigDialog/HostCommandHeaderRow=Command"
"$$$/AuUI/ControlSurfaceButtonAssignmentDialog/DialogTitle=Control Surface Button Assignments"
"$$$/AuUI/ControlSurfaceButtonAssignmentDialog/OK=OK"
"$$$/AuUI/ControlSurfaceChannelStrip/Pan=Pan"
"$$$/AuUI/ControlSurfaceChannelStrip/Send=S@0"
"$$$/AuUI/ControlSurfaceHandler/VolumeLong=Volume: @0dB"
"$$$/AuUI/ControlSurfaceHandler/VolumeShort=Vol @0dB"
"$$$/AuUI/ControlSurfaceMonoTo51PanComponent/PanAngle=Angle"
"$$$/AuUI/ControlSurfaceMonoTo51PanComponent/PanCenter=Center"
"$$$/AuUI/ControlSurfaceMonoTo51PanComponent/PanLFE=LFE"
"$$$/AuUI/ControlSurfaceMonoTo51PanComponent/PanRadius=Radius"
"$$$/AuUI/ControlSurfacePrefs/ButtonAssignments=Button Assignments..."
"$$$/AuUI/ControlSurfacePrefs/Configure=Configure..."
"$$$/AuUI/ControlSurfaceStereoTo51PanComponent/PanAngle=Angle"
"$$$/AuUI/ControlSurfaceStereoTo51PanComponent/PanCenter=Center"
"$$$/AuUI/ControlSurfaceStereoTo51PanComponent/PanLFE=LFE"
"$$$/AuUI/ControlSurfaceStereoTo51PanComponent/PanRadius=Radius"
"$$$/AuUI/ControlSurfaceStereoTo51PanComponent/PanSpread=Spread"
"$$$/AuUI/ControllerPrefs/DeviceClass=Device Class:"
"$$$/AuUI/Debug/CodeProfilerDebugMonitorPanel/TabName=Code Profiler Debug Monitor"
"$$$/AuUI/Debug/FileSystemDebugMonitorPanel/TabName=File System Debug Monitor"
"$$$/AuUI/Debug/PlayerDebugMonitorPanel/TabName=Player Debug Monitor"
"$$$/AuUI/Document/RecordingWillStop=在录制期间切换到其他文件将导致录制停止。您是否确定要继续？"
"$$$/AuUI/DocumentAlert/Cancel=取消"
"$$$/AuUI/DocumentAlert/OK=确定"
"$$$/AuUI/DocumentProgress/Cancel=取消"
"$$$/AuUI/DocumentProgress/EstimatedTimeRemaining=剩余时间:"
"$$$/AuUI/DocumentProgress/Hour=时"
"$$$/AuUI/DocumentProgress/Hours=时"
"$$$/AuUI/DocumentProgress/Minute=分"
"$$$/AuUI/DocumentProgress/Minutes=分"
"$$$/AuUI/DocumentProgress/Second=秒"
"$$$/AuUI/DocumentProgress/Seconds=秒"
"$$$/AuUI/DocumentProgress/TimeRemaining=估计剩余时间"
"$$$/AuUI/EffectEditorWindow/CantOverwriteFactoryPresetPrompt=预设 '@0' 已存在。您不能覆盖出厂预设。请挑选不同的预设名。"
"$$$/AuUI/EffectEditorWindow/DeleteConfirm=您确定要删除预设 '@0'？"
"$$$/AuUI/EffectEditorWindow/FavoriteNameInvalid='@0' 不是一个有效名称。请换一个名称。"
"$$$/AuUI/EffectEditorWindow/NewFavorite=新建收藏"
"$$$/AuUI/EffectEditorWindow/OverwriteFavoritePrompt=收藏效果 '@0' 已存在。您是否打算覆盖它？"
"$$$/AuUI/EffectEditorWindow/OverwritePresetPrompt=预设 '@0' 已存在。您是否打算覆盖它？"
"$$$/AuUI/EffectEditorWindow/PresetHasNoName=请挑选一个预设。"
"$$$/AuUI/EffectEditorWindow/PresetLoadFailer=预设 '@0' 未正确加载。"
"$$$/AuUI/EffectEditorWindow/PresetNameCantBeDeleted='@0' 无法删除."
"$$$/AuUI/EffectEditorWindow/PresetNameInvalid='@0' 不是一个有效名称。请换一个名称。"
"$$$/AuUI/EffectEditorWindow/SaveFavoriteDialogTitle=保存收藏"
"$$$/AuUI/EffectEditorWindow/SaveFavoriteName=收藏名称:"
"$$$/AuUI/EffectEditorWindow/SavePresetDialogTitle=保存效果预设"
"$$$/AuUI/EffectEditorWindow/SavePresetName=预设名称:"
"$$$/AuUI/EffectEditorWindow/UntitledPreset=未命名预设"
"$$$/AuUI/Effects/Analysis/ContextMenu/Clear=清除已修复"
"$$$/AuUI/Effects/Analysis/ContextMenu/CreateMarker=创建标记"
"$$$/AuUI/Effects/Analysis/ContextMenu/Fix=修复"
"$$$/AuUI/Effects/Analysis/ContextMenu/FixAll=全部修复"
"$$$/AuUI/Effects/Analysis/ContextMenu/ZoomIn=放大"
"$$$/AuUI/Effects/Analysis/ContextMenu/ZoomOut=缩小"
"$$$/AuUI/Effects/ClearEffectsRackWarning=这将从效果架移除所有效果。您是否要继续？"
"$$$/AuUI/Effects/Hiss/CurveHigh=高"
"$$$/AuUI/Effects/Hiss/CurveLow=低"
"$$$/AuUI/Effects/Hiss/CurveMed=中"
"$$$/AuUI/Effects/HissViewOptions/LinearScale=线性比例"
"$$$/AuUI/Effects/HissViewOptions/LogScale=对数比例"
"$$$/AuUI/Effects/HissViewOptions/ResetControlCurve=重置控制曲线"
"$$$/AuUI/Effects/HissViewOptions/ShowChannel=显示声道"
"$$$/AuUI/Effects/HissViewOptions/ShowToolTips=在曲线图上显示工具提示"
"$$$/AuUI/Effects/NoNoise/NoiseFloorHigh=高"
"$$$/AuUI/Effects/NoNoise/NoiseFloorLow=低"
"$$$/AuUI/Effects/NoNoise/NoiseFloorThreshold=阈值"
"$$$/AuUI/Effects/NoNoiseViewOptions/LinearScale=线性比例"
"$$$/AuUI/Effects/NoNoiseViewOptions/LogScale=对数比例"
"$$$/AuUI/Effects/NoNoiseViewOptions/ShowChannel=显示声道"
"$$$/AuUI/Effects/NoNoiseViewOptions/ShowControlCurve=显示控制曲线"
"$$$/AuUI/Effects/NoNoiseViewOptions/ShowNoiseFloor=显示噪声基准"
"$$$/AuUI/Effects/NoNoiseViewOptions/ShowToolTips=在曲线图上显示工具提示"
"$$$/AuUI/ExportMenu/MultitrackMixdown=多轨缩混(&M)"
"$$$/AuUI/ExportMenu/SessionAsTemplate=项目为模板(&L)..."
"$$$/AuUI/ExtractAudioFromCDDialog/Play=播放"
"$$$/AuUI/ExtractAudioFromCDDialog/Stop=停止"
"$$$/AuUI/Favorites/RecordingFavoriteMessage=一个收藏效果当前已被记录。收藏夹让您记录一个或多个在波形编辑器中的操作，通过一个单独指令你可以从收藏夹菜单中存取，或者通过批处理运行于多个文件上。您可以捕捉诸如应用效果，调节增益，插入静默，添加淡化，以及更多操作。#{endl}#{endl}要停止记录，选择 收藏夹 > 停止记录收藏效果。#{endl}#{endl}更多有关收藏夹信息，请参看帮助。"
"$$$/AuUI/HUD/HideHUD=隐藏 HUD"
"$$$/AuUI/HUD/Pin=固定 HUD 到当前位置"
"$$$/AuUI/HardwareClassDriverPrefsPage/DeviceChangeWarning=设备更改可修改声道映射，输入分配，以及影响当前的回放或录制应用。您是否打算继续？"
"$$$/AuUI/HardwareClassDriverPrefsPage/In=输入: "
"$$$/AuUI/HardwareClassDriverPrefsPage/Out=输出: "
"$$$/AuUI/HardwareClassDriverPrefsPageController/ApplySettingsFailed=设备设置因下列错误产生而不能被应用:"
"$$$/AuUI/HardwareClassDriverPrefsPageController/ClockMasterIsMaster=主控"
"$$$/AuUI/HardwareClassDriverPrefsPageController/ClockMasterIsSlave=从属"
"$$$/AuUI/HardwareClassDriverPrefsPageController/ClockSourceNameNotAvailable=不可用"
"$$$/AuUI/HardwareClassDriverPrefsPageController/DeviceCurrentlyUnavailable= (当前不可用)"
"$$$/AuUI/HardwareClassDriverPrefsPageController/NoDeviceAvailable=无可用设备"
"$$$/AuUI/HardwareClassDriverPrefsPageController/SampleRateIsUnknown=未知"
"$$$/AuUI/HardwareClassDriverPrefsPageController/SetIOBlockSizeFailed=I/O 缓存大小因下列错误产生而不能设置:"
"$$$/AuUI/HardwareClassDriverPrefsPageController/SetInputDeviceFailed=输入设备因下列错误产生而不能设置:"
"$$$/AuUI/HardwareClassDriverPrefsPageController/SetOutputDeviceFailed=输出设备因下列错误产生而不能设置:"
"$$$/AuUI/HardwareClassDriverPrefsPageController/UsePreviousSettings=最近有效设备设置将被使用。"
"$$$/AuUI/HardwareClassDriverPrefsPageController/UsePreviousSettingsFailed=最近有效设备设置不能被设定。请检查您的音频硬件。"
"$$$/AuUI/Help/DownloadExtraURL=http://www.adobe.com/go/audition_extras"
"$$$/AuUI/History/HistoryPanel/ClearHistoryAlertMessage=您是否确定要清除所有操作？这将不可恢复。"
"$$$/AuUI/History/HistoryPanel/ClearHistoryAlertTitle=@APPNAME"
"$$$/AuUI/History/HistoryPanel/DeleteActionAlertMessage=您是否确定要删除本次操作？这将不可恢复。"
"$$$/AuUI/History/HistoryPanel/DeleteActionAlertTitle=@APPNAME"
"$$$/AuUI/MarkerMenuXML/AddCDTrackMarker=添加CD轨道标记(&C)"
"$$$/AuUI/MarkerMenuXML/AddCartTimerMarker=Add Cart &Timer Marker"
"$$$/AuUI/MarkerMenuXML/AddCueMarker=添加Cue标记(&A)"
"$$$/AuUI/MarkerMenuXML/AddSubclipMarker=Add &Subclip Marker"
"$$$/AuUI/MarkerMenuXML/DeleteAllMarkers=删除所有标记(&A)"
"$$$/AuUI/MarkerMenuXML/DeleteSelectedMarkers=删除选中标记(&D)"
"$$$/AuUI/MarkerMenuXML/MoveCTIToNext=移动指示器到下一处(&N)"
"$$$/AuUI/MarkerMenuXML/MoveCTIToPrevious=移动指示器到前一处(&P)"
"$$$/AuUI/MarkerMenuXML/RenameSelectedMarker=重命名选中标记(&R)"
"$$$/AuUI/MetadataPanel/MetadataDisplay=元数据显示..."
"$$$/AuUI/MetronomeMenu/ChangeMetronomeSound=更改声音类型"
"$$$/AuUI/MetronomeMenu/EditMetronomePattern=编辑样式.."
"$$$/AuUI/MetronomeMenu/EnableMetronome=启用节拍器"
"$$$/AuUI/MetronomeMenu/MetronomeSoundAfrican1=African 1"
"$$$/AuUI/MetronomeMenu/MetronomeSoundAfrican2=African 2"
"$$$/AuUI/MetronomeMenu/MetronomeSoundBeeps=Beeps"
"$$$/AuUI/MetronomeMenu/MetronomeSoundCymbals=Cymbals"
"$$$/AuUI/MetronomeMenu/MetronomeSoundKit=Kit"
"$$$/AuUI/MetronomeMenu/MetronomeSoundLatin1=Latin 1"
"$$$/AuUI/MetronomeMenu/MetronomeSoundLatin2=Latin 2"
"$$$/AuUI/MetronomeMenu/MetronomeSoundLatin3=Latin 3"
"$$$/AuUI/MetronomeMenu/MetronomeSoundSticks=Sticks"
"$$$/AuUI/MetronomeMenu/MetronomeSoundTabla=Tabla"
"$$$/AuUI/MultipleClipsPropertiesView/ClipGain=素材增益"
"$$$/AuUI/MultipleClipsPropertiesView/SetClipGain=设置素材的增益"
"$$$/AuUI/Multitrack/AutomationLaneSelector/Mute=静音"
"$$$/AuUI/Multitrack/AutomationLaneSelector/RackInput=组输入"
"$$$/AuUI/Multitrack/AutomationLaneSelector/RackMix=组混合"
"$$$/AuUI/Multitrack/AutomationLaneSelector/RackOutput=组输出"
"$$$/AuUI/Multitrack/AutomationLaneSelector/RackPower=组开关"
"$$$/AuUI/Multitrack/AutomationLaneSelector/SendNUM=发送 @0 输出"
"$$$/AuUI/Multitrack/AutomationLaneSelector/ShowEnvelopes=显示包络"
"$$$/AuUI/Multitrack/AutomationLaneSelector/TrackEQ=声轨 EQ"
"$$$/AuUI/Multitrack/AutomationLaneSelector/Volume=音量"
"$$$/AuUI/Multitrack/CantPasteDifferentSampleRateWarning=一个或多个素材的采样率与合成项目的采样率不匹配。这些素材将不被插入。"
"$$$/AuUI/Multitrack/DeleteSelectedBusTrackWarning=删除总线声轨可通过撤销指令恢复，但是任何现有传送通道将永久丢失。您是否打算继续？"
"$$$/AuUI/Multitrack/OverwriteTemplateWarning=项目模板 \"@0\" 已经存在。是否打算覆盖？"
"$$$/AuUI/Multitrack/TrackControls/AutomationLatch=锁定"
"$$$/AuUI/Multitrack/TrackControls/AutomationOff=关闭"
"$$$/AuUI/Multitrack/TrackControls/AutomationRead=读取"
"$$$/AuUI/Multitrack/TrackControls/AutomationTouch=触发"
"$$$/AuUI/Multitrack/TrackControls/AutomationWrite=写入"
"$$$/AuUI/Multitrack/TrackControls/StereoBalance=立体声平衡"
"$$$/AuUI/Multitrack/TrackControls/StereoPan=立体声声相"
"$$$/AuUI/Multitrack/TrackControls/VolumeKnob=音量"
"$$$/AuUI/Multitrack/TrackSend/VolumeKnob=音量"
"$$$/AuUI/MultitrackEditor/ClipStretchButton/Tooltip=全局素材伸缩开关"
"$$$/AuUI/MultitrackEditor/MetronomeButton/Tooltip=节拍器开关"
"$$$/AuUI/NewMenu/AudioFile=音频文件(&F)..."
"$$$/AuUI/NewMenu/CDLayout=CD布局(&C)"
"$$$/AuUI/NewMenu/SessionFile=多轨合成项目(&M)..."
"$$$/AuUI/PitchCurveHandler/PitchProfile=音高调整"
"$$$/AuUI/PitchCurveHandler/ZoomWarning=放大显示音高曲线"
"$$$/AuUI/PlaylistPanel/Play=播放此条目"
"$$$/AuUI/PlaylistPanel/Stop=停止"
"$$$/AuUI/Preferences/private/IO/Audio/HardwareClassDriverPrefsPageController/DeviceQueryFailed=未知 - 设备查询失败"
"$$$/AuUI/RackView/EditEffect=编辑效果"
"$$$/AuUI/RackView/RemoveEffect=移除效果"
"$$$/AuUI/RackViewEffectsMenu/AdaptiveNoiseReduction=自适应降噪..."
"$$$/AuUI/RackViewEffectsMenu/Amplify=增幅..."
"$$$/AuUI/RackViewEffectsMenu/AmplitudeAndCompression=振幅与压限"
"$$$/AuUI/RackViewEffectsMenu/AnalogDelayEffect=模拟延迟..."
"$$$/AuUI/RackViewEffectsMenu/AutoClickRemover=自动移除咔嗒声..."
"$$$/AuUI/RackViewEffectsMenu/AutoPhaseCorrection=自动相位校正..."
"$$$/AuUI/RackViewEffectsMenu/AutoPitchCorrectEffect=自动音高修正..."
"$$$/AuUI/RackViewEffectsMenu/CenterChannelExtractEffect=中置声道提取..."
"$$$/AuUI/RackViewEffectsMenu/ChannelMixerEffect=声道混合..."
"$$$/AuUI/RackViewEffectsMenu/ChorusEffect=和声..."
"$$$/AuUI/RackViewEffectsMenu/ChorusFlangerEffect=和声/镶边..."
"$$$/AuUI/RackViewEffectsMenu/ConvolutionReverbEffect=卷积混响..."
"$$$/AuUI/RackViewEffectsMenu/DeEsserEffect=去除齿音..."
"$$$/AuUI/RackViewEffectsMenu/DeHummerEffect=去除嗡嗡声..."
"$$$/AuUI/RackViewEffectsMenu/DelayEcho=延迟与回声"
"$$$/AuUI/RackViewEffectsMenu/DelayEffect=延迟..."
"$$$/AuUI/RackViewEffectsMenu/DistortionEffect=失真..."
"$$$/AuUI/RackViewEffectsMenu/Dynamics=动态处理..."
"$$$/AuUI/RackViewEffectsMenu/EchoEffect=回声..."
"$$$/AuUI/RackViewEffectsMenu/Effects/AU=AU"
"$$$/AuUI/RackViewEffectsMenu/Effects/VST=VST"
"$$$/AuUI/RackViewEffectsMenu/Effects/VST3=VST3"
"$$$/AuUI/RackViewEffectsMenu/FFTFilter=FFT 滤波..."
"$$$/AuUI/RackViewEffectsMenu/Filter=滤波与均衡"
"$$$/AuUI/RackViewEffectsMenu/FlangerEffect=镶边..."
"$$$/AuUI/RackViewEffectsMenu/FullReverbEffect=完整混响..."
"$$$/AuUI/RackViewEffectsMenu/GraphicEQ10Bands=图形均衡器 (10 段)..."
"$$$/AuUI/RackViewEffectsMenu/GraphicEQ20Bands=图形均衡器 (20 段)..."
"$$$/AuUI/RackViewEffectsMenu/GraphicEQ30Bands=图形均衡器 (30 段)..."
"$$$/AuUI/RackViewEffectsMenu/GraphicPhaseShifter=图形移相器..."
"$$$/AuUI/RackViewEffectsMenu/GuitarSuiteEffect=吉他套件..."
"$$$/AuUI/RackViewEffectsMenu/HardLimit=强制限幅..."
"$$$/AuUI/RackViewEffectsMenu/IntraClip=语音音量电平..."
"$$$/AuUI/RackViewEffectsMenu/Modulation=调制"
"$$$/AuUI/RackViewEffectsMenu/MultiBandCompressorEffect=多段压限..."
"$$$/AuUI/RackViewEffectsMenu/NoiseReductionRestoration=降噪/修复"
"$$$/AuUI/RackViewEffectsMenu/NotchFilter=陷波滤波器..."
"$$$/AuUI/RackViewEffectsMenu/ParametricEQ=参数均衡..."
"$$$/AuUI/RackViewEffectsMenu/PhaserEffect=相位..."
"$$$/AuUI/RackViewEffectsMenu/Reverb=混响"
"$$$/AuUI/RackViewEffectsMenu/ReverbEffect=混响..."
"$$$/AuUI/RackViewEffectsMenu/SimpleMasteringEffect=母带处理..."
"$$$/AuUI/RackViewEffectsMenu/SingleBandCompressorEffect=单段压限..."
"$$$/AuUI/RackViewEffectsMenu/Special=特殊效果"
"$$$/AuUI/RackViewEffectsMenu/StereoImagery=立体声声像"
"$$$/AuUI/RackViewEffectsMenu/Stretch=时间和音调"
"$$$/AuUI/RackViewEffectsMenu/StudioReverb=室内混响..."
"$$$/AuUI/RackViewEffectsMenu/SurroundReverb=环绕声混响..."
"$$$/AuUI/RackViewEffectsMenu/TubeModeledCompressorEffect=电子管压限..."
"$$$/AuUI/RackViewEffectsMenu/VocalEnhancerEffect=人声增强..."
"$$$/AuUI/SaveAsUtils/SomeFilesBusyDuringSaveAllWarning=一个或多个文件正忙碌或处于警告状态而不能被保存。请稍后在当前操作完成时尝试保存这些文件，单击确定并继续保存所有其他未保存的文件。"
"$$$/AuUI/SelectionView/SelectionViewPanel/TabName=选区/视图"
"$$$/AuUI/ShortApplicationName=Audition"
"$$$/AuUI/StatusMenuXML/DroppedAudio=检测已丢弃采样(&P)"
"$$$/AuUI/StatusMenuXML/Duration=持续时间(&D)"
"$$$/AuUI/StatusMenuXML/ErrorsWarnings=文件状态(&F)"
"$$$/AuUI/StatusMenuXML/FreeSpace=剩余空间(&E)"
"$$$/AuUI/StatusMenuXML/FreeSpaceTime=剩余空间（时间）(&T)"
"$$$/AuUI/StatusMenuXML/SampleType=采样类型(&T)"
"$$$/AuUI/StatusMenuXML/ShowStatus=显示(&S)"
"$$$/AuUI/StatusMenuXML/UncompressedAudioSize=未压缩音频大小(&Z)"
"$$$/AuUI/StatusMenuXML/VideoFrameRate=视频帧速率(&V)"
"$$$/AuUI/TimelineEditor/SnapButton/Tooltip=吸附开关"
"$$$/AuUI/TimelineEditor/TimelineRulerLabelSuffix/ClipContext=(素材)"
"$$$/AuUI/Transport/CantRecordNoInputChannels=选中音频设备已没有输入通道可用。你是否要打开音频硬件首选项设置参数？"
"$$$/AuUI/Transport/CantRecordNoInputChannelsMapped=选中音频声道已没有输入声道映射。你是否要打开音频声道映射首选项设置参数？"
"$$$/AuUI/Transport/CantRecordNoSelectedChannels=The active document does not have any enabled channels.  Please enable some channels to record."
"$$$/AuUI/Transport/CantRecordSRMismatch=音频输入的采样率与输出设备不匹配。音频不能被录制工具校正。#{endl}#{endl}使用适当的操作系统或音频设备控制面板来调节输入和输出设备的采样率，使之采用相同设置。"
"$$$/AuUI/Transport/TransportPanel/TabName=走带"
"$$$/AuUI/UserInterfacePrefsPage/AGMChangeRequiresRelaunch=Changes to this setting will take effect upon the next launch of Audition."
"$$$/AuUI/Video/VideoPanel/TabName=视频"
"$$$/AuUI/VideoDisplayMenuXML/VideoDisplayFullResolution=&Full Resolution"
"$$$/AuUI/VideoDisplayMenuXML/VideoDisplayFullResolutionOnStop=Full Resolution on &Stop"
"$$$/AuUI/VideoDisplayMenuXML/VideoDisplayQuarterResolution=1/&4 Resolution"
"$$$/AuUI/VideoDisplayMenuXML/VideoDisplaySetScale100=&100% Scaling"
"$$$/AuUI/VideoDisplayMenuXML/VideoDisplaySetScale200=&200% Scaling"
"$$$/AuUI/VideoDisplayMenuXML/VideoDisplaySetScale25=2&5% Scaling"
"$$$/AuUI/VideoDisplayMenuXML/VideoDisplaySetScale50=5&0% Scaling"
"$$$/AuUI/VideoDisplayMenuXML/VideoDisplaySetScaleBestFit=&Best Fit Scaling"
"$$$/AuUI/VideoDisplayMenuXML/VideoDisplaySixteenthResolution=1/1&6 Resolution"
"$$$/AuUI/WaveEditor/DefaultErrorMessage=@APPNAME 遇到一个试图执行操作的错误。"
"$$$/AuUI/WaveEditor/HUD/AdjustAmplitude=调节振幅"
"$$$/AuUI/WaveEditor/HUD/AdjustPitch=调整音高"
"$$$/AuUI/WaveEditorController/ClipboardSelected=剪贴板 @0 已选中"
"$$$/AuUI/WaveEditorController/EmptyClipboard=剪贴板 @0 (空)"
"$$$/AuUI/WaveEditorController/FilledClipboard=剪贴板 @0"
"$$$/AuUI/Workspace/Window/Editor=编辑器"
"$$$/AuUI/WorkspaceProvider/Classic=经典"
"$$$/AuUI/WorkspaceProvider/Default=默认"
"$$$/AuUI/WorkspaceProvider/EditAudioToVideo=编辑音频到视频"
"$$$/AuUI/WorkspaceProvider/MasteringAndAnalysis=母带处理与分析"
"$$$/AuUI/WorkspaceProvider/MaximumEditingDualMonitor=最大化编辑（双监视器）"
"$$$/AuUI/WorkspaceProvider/RadioProduction=广播产品"
"$$$/AuUI/WorkspaceProvider/Radio Production=广播产品1"
"$$$/AuUI/Zoom/ZoomPanel/TabName=缩放"
"$$$/AudioChannelMappingPrefsPage/Device=设备: @0"
"$$$/AudioChannelMappingPrefsXML/AudioChannelMapping=音频声道映射"
"$$$/AudioChannelMappingPrefsXML/DefaultStereoInput=默认立体声输入"
"$$$/AudioChannelMappingPrefsXML/Device=设备:"
"$$$/AudioChannelMappingPrefsXML/InputDevice=设备:"
"$$$/AudioChannelMappingPrefsXML/Output=输出"
"$$$/AudioComponents/AdaptiveNoisePresets/DeReverbSingleSource=去混响独立源"
"$$$/AudioComponents/AdaptiveNoisePresets/HeavyNoiseReduction=强降噪"
"$$$/AudioComponents/AdaptiveNoisePresets/LightNoiseReduction=弱降噪"
"$$$/AudioComponents/AdaptiveNoiseReductionTitle=自适应降噪"
"$$$/AudioComponents/AmplifyPresets/10dBBoost=+10dB 提升"
"$$$/AudioComponents/AmplifyPresets/10dBCut=-10dB 削减"
"$$$/AudioComponents/AmplifyPresets/1dBBoost=+1dB 提升"
"$$$/AudioComponents/AmplifyPresets/1dBCut=-1dB 削减"
"$$$/AudioComponents/AmplifyPresets/3dBBoost=+3dB 提升"
"$$$/AudioComponents/AmplifyPresets/3dBCut=-3dB 削减"
"$$$/AudioComponents/AmplifyPresets/6dBBoost=+6dB 提升"
"$$$/AudioComponents/AmplifyPresets/6dBCut=-6dB 削减"
"$$$/AudioComponents/AmplifyTitle=增幅"
"$$$/AudioComponents/AutoClickRemoverPresets/HeavyReduction=强削减"
"$$$/AudioComponents/AutoClickRemoverPresets/LightReduction=弱削减"
"$$$/AudioComponents/AutoClickRemoverPresets/MediumReduction=中度削减"
"$$$/AudioComponents/AutoPhasePresets/CenterPanning=中置声场"
"$$$/AudioComponents/AutoPhasePresets/ManualCorrection=手动校正"
"$$$/AudioComponents/AutoPhasePresets/Repair=修复"
"$$$/AudioComponents/AutomaticClickRemoverTitle=自动去除咔嗒声"
"$$$/AudioComponents/AutomaticPhaseCorrectionTitle=自动校正相位"
"$$$/AudioComponents/BenderShifterTitle=变调"
"$$$/AudioComponents/CenterChannelExtractPresets/Acapella=无伴奏和声"
"$$$/AudioComponents/CenterChannelExtractPresets/AmplifyVocals6dB=放大人声 6dB"
"$$$/AudioComponents/CenterChannelExtractPresets/BoostCenterChannelBass=提升中置声道低音"
"$$$/AudioComponents/CenterChannelExtractPresets/Karaoke=卡拉OK (降低人声 20dB)"
"$$$/AudioComponents/CenterChannelExtractPresets/LiftVocals10dB=提高人声 10dB"
"$$$/AudioComponents/CenterChannelExtractPresets/SingAlong=跟唱 (降低人声 6dB)"
"$$$/AudioComponents/CenterChannelExtractPresets/VocalRemove=移除人声"
"$$$/AudioComponents/CenterChannelExtractorTitle=中置声道提取"
"$$$/AudioComponents/ChannelMixerPresets/AllChannels50=全部声轨的 50%"
"$$$/AudioComponents/ChannelMixerPresets/AmbisonicTo51=Ambisonic B-Format 到 ITU 5.1"
"$$$/AudioComponents/ChannelMixerPresets/AmbisonicToL_R_Ls_Rs=Ambisonic B-Format 到 [左 右 左环绕 右环绕]"
"$$$/AudioComponents/ChannelMixerPresets/C_L_R_Ls_Rs_LFE_ToITU51=[中置 左 右 左环绕 右环绕 重低音] 到 ITU 5.1"
"$$$/AudioComponents/ChannelMixerPresets/DownmixToL_R_C=缩混为 3/0 [左 右 中置]"
"$$$/AudioComponents/ChannelMixerPresets/DownmixToL_R_C_Cs=缩混为 3/1 [左 右 中置 中置环绕]"
"$$$/AudioComponents/ChannelMixerPresets/DownmixToL_R_Cs=缩混为 2/1 [左 右 中置环绕]"
"$$$/AudioComponents/ChannelMixerPresets/DownmixToL_R_Ls_Rs=缩混为 2/2 [左 右 左环绕 右环绕]"
"$$$/AudioComponents/ChannelMixerPresets/DownmixToMatrixedStereo=缩混为矩阵立体声 [Lt Rt]"
"$$$/AudioComponents/ChannelMixerPresets/DownmixToMono=缩混为 1/0 (单声道)"
"$$$/AudioComponents/ChannelMixerPresets/DownmixToStereo=缩混为 2/0 (立体声)"
"$$$/AudioComponents/ChannelMixerPresets/FillLeft=填充左声道"
"$$$/AudioComponents/ChannelMixerPresets/FillRight=填充右声道"
"$$$/AudioComponents/ChannelMixerPresets/ITU51To51_Lt_Rt=ITU 5.1 到 5.1 + [Lt Rt]"
"$$$/AudioComponents/ChannelMixerPresets/ITU51ToC_L_R_Ls_Rs_LFE=ITU 5.1 到 [C L R Ls Rs LFE]"
"$$$/AudioComponents/ChannelMixerPresets/ITU51ToL_C_R_Ls_Rs_LFE=ITU 5.1 到 [L C R Ls Rs LFE]"
"$$$/AudioComponents/ChannelMixerPresets/ITU51ToL_R_Ls_Rs_C_LFE=ITU 5.1 到 [L R Ls Rs C LFE]"
"$$$/AudioComponents/ChannelMixerPresets/L_C_R_Ls_Rs_LFE_ToITU51=[L C R Ls Rs LFE] 到 ITU 5.1"
"$$$/AudioComponents/ChannelMixerPresets/L_R_Ls_Rs_C_LFE_ToITU51=[L R Ls Rs C LFE] 到 ITU 5.1"
"$$$/AudioComponents/ChannelMixerPresets/MatrixedStereoToITU51=矩阵立体声 [Lt Rt] 到 ITU 5.1"
"$$$/AudioComponents/ChannelMixerPresets/MidSideToStereo=Mid/Side 到立体声"
"$$$/AudioComponents/ChannelMixerPresets/StereoToMidSide=立体声到 Mid/Side"
"$$$/AudioComponents/ChannelMixerPresets/SwapLeftRight=交换左右声道"
"$$$/AudioComponents/ChannelMixerPresets/TypeIAFormatToAmbisonicBFormat=Type I A-Format 到 Ambisonic B-Format"
"$$$/AudioComponents/ChannelMixerTitle=声道混合"
"$$$/AudioComponents/ChorusPresets/10Voices=10 Voices"
"$$$/AudioComponents/ChorusPresets/5Voices=5 Voices"
"$$$/AudioComponents/ChorusPresets/AcousticDuet=Acoustic Duet"
"$$$/AudioComponents/ChorusPresets/BassChorus=Bass Chorus"
"$$$/AudioComponents/ChorusPresets/BrokenStereo=Broken Stereo"
"$$$/AudioComponents/ChorusPresets/ChaosPits=Chaos Pits"
"$$$/AudioComponents/ChorusPresets/Fluttery=Fluttery"
"$$$/AudioComponents/ChorusPresets/ProjectNightmare=Project Nightmare"
"$$$/AudioComponents/ChorusPresets/Quartet=Quartet"
"$$$/AudioComponents/ChorusPresets/RichChorus=Rich Chorus"
"$$$/AudioComponents/ChorusPresets/RoboticBeeAttack=Robotic Bee Attack"
"$$$/AudioComponents/ChorusPresets/SubtleVocalChorus=Subtle Vocal Chorus"
"$$$/AudioComponents/ChorusPresets/TinyPebble=Tiny Pebble"
"$$$/AudioComponents/ChorusPresets/WaverySingAlong=Wavery Sing-Along"
"$$$/AudioComponents/ChorusTitle=和声"
"$$$/AudioComponents/DefaultPresetName=(默认)"
"$$$/AudioComponents/DelayPresets/100msDelayOnLeft=100ms Delay on Left"
"$$$/AudioComponents/DelayPresets/Bounce=Bounce"
"$$$/AudioComponents/DelayPresets/DuelingDrunkDrummers=Dueling Drunk Drummers"
"$$$/AudioComponents/DelayPresets/MonoRepeater=Mono Repeater"
"$$$/AudioComponents/DelayPresets/OutOfTime=Out of Time"
"$$$/AudioComponents/DelayPresets/RichDouble=Rich Double"
"$$$/AudioComponents/DelayPresets/Rockabilly=Rockabilly"
"$$$/AudioComponents/DelayPresets/RoomAmbience=Room Ambience"
"$$$/AudioComponents/DelayPresets/SlapBack=Slap Back"
"$$$/AudioComponents/DelayPresets/SpatialEcho=Spatial Echo"
"$$$/AudioComponents/DelayPresets/Stutter=Stutter"
"$$$/AudioComponents/DelayPresets/TapeSlap=Tape Slap"
"$$$/AudioComponents/DelayPresets/WideMaxDelay=Wide Max Delay"
"$$$/AudioComponents/DelayTitle=延迟"
"$$$/AudioComponents/DopplerPresets/Ambulance=Ambulance"
"$$$/AudioComponents/DopplerPresets/BeingSpun=Being Spun in Circles"
"$$$/AudioComponents/DopplerPresets/Drippy=Drippy"
"$$$/AudioComponents/DopplerPresets/EyeOfTornado=Eye of Tornado"
"$$$/AudioComponents/DopplerPresets/Jet=Jet"
"$$$/AudioComponents/DopplerPresets/LargeTrack=Large Track"
"$$$/AudioComponents/DopplerPresets/MerryGoRound=Merry-Go Round"
"$$$/AudioComponents/DopplerPresets/PassingCloselyRightToLeft=Passing Closely Right to Left"
"$$$/AudioComponents/DopplerPresets/PassingOnLeft=Passing on Left"
"$$$/AudioComponents/DopplerPresets/PassingOnRight=Passing on Right"
"$$$/AudioComponents/DopplerPresets/RotatingPointSource=Rotating Point Source"
"$$$/AudioComponents/DopplerPresets/SuperFastPassingTrain=Super-Fast Passing Train"
"$$$/AudioComponents/DopplerPresets/SuperSonicReEntry=Super Sonic Re-Entry"
"$$$/AudioComponents/DopplerPresets/WhizzingByLeftToRight=Whizzing by Left to Right"
"$$$/AudioComponents/DopplerShifterTitle=Doppler Shifter"
"$$$/AudioComponents/DynamicNoiseRemovalTitle=Dynamic Noise Removal"
"$$$/AudioComponents/DynamicsPresets/31Expander=3:1, Expander < 10dB"
"$$$/AudioComponents/DynamicsPresets/BoomyKick=Boomy Kick"
"$$$/AudioComponents/DynamicsPresets/BroadcastLimiter=Broadcast Limiter"
"$$$/AudioComponents/DynamicsPresets/CardboardKickDrum=Cardboard Kick Drum"
"$$$/AudioComponents/DynamicsPresets/CardboardSnare=Cardboard Snare"
"$$$/AudioComponents/DynamicsPresets/ClassicSoftKnee=Classic Soft Knee"
"$$$/AudioComponents/DynamicsPresets/Compander=Compander"
"$$$/AudioComponents/DynamicsPresets/DeEsserHard=DeEsser Hard"
"$$$/AudioComponents/DynamicsPresets/DeEsserLight=DeEsser Light"
"$$$/AudioComponents/DynamicsPresets/DeEsserMedium=DeEsser Medium"
"$$$/AudioComponents/DynamicsPresets/DrumMachineLimiter=Drum Machine Limiter"
"$$$/AudioComponents/DynamicsPresets/EGuitarGate=E. Guitar Gate"
"$$$/AudioComponents/DynamicsPresets/FastDrums=Fast Drums"
"$$$/AudioComponents/DynamicsPresets/FatBass=Fat Bass"
"$$$/AudioComponents/DynamicsPresets/FatSnare=Fat Snare"
"$$$/AudioComponents/DynamicsPresets/MaximumPumping=Maximum Pumping"
"$$$/AudioComponents/DynamicsPresets/NastyGuitar=Nasty Guitar"
"$$$/AudioComponents/DynamicsPresets/NoiseGate10dB=Noise Gate @ 10dB"
"$$$/AudioComponents/DynamicsPresets/NoiseGate20dB=Noise Gate @ 20dB"
"$$$/AudioComponents/DynamicsPresets/PickBass=Pick Bass"
"$$$/AudioComponents/DynamicsPresets/RapPresence=Rap Presence"
"$$$/AudioComponents/DynamicsPresets/RockVocal=Rock Vocal"
"$$$/AudioComponents/DynamicsPresets/SlapBass=Slap Bass"
"$$$/AudioComponents/DynamicsPresets/SlowDrums=Slow Drums"
"$$$/AudioComponents/DynamicsPresets/SmoothVocal=Smooth Vocal"
"$$$/AudioComponents/DynamicsPresets/SnareShellRing=Snare Shell Ring"
"$$$/AudioComponents/DynamicsPresets/SoftLimit12dB=Soft Limit -12dB"
"$$$/AudioComponents/DynamicsPresets/SoftLimit24dB=Soft Limit -24dB"
"$$$/AudioComponents/DynamicsPresets/StereoRockMix=Stereo Rock Mix"
"$$$/AudioComponents/DynamicsPresets/ThunderDrums=Thunder Drums"
"$$$/AudioComponents/DynamicsPresets/VocalLimiter=Vocal Limiter"
"$$$/AudioComponents/DynamicsPresets/VoiceOver=旁白"
"$$$/AudioComponents/DynamicsProcessingTitle=动态处理"
"$$$/AudioComponents/EchoPresets/AnalogDelay=模拟延迟"
"$$$/AudioComponents/EchoPresets/Danger=Danger - Sci Fi Cliche Approaching"
"$$$/AudioComponents/EchoPresets/DelicateWhispers=Delicate Whispers"
"$$$/AudioComponents/EchoPresets/EchoWeightedLeft=Echo Weighted Left"
"$$$/AudioComponents/EchoPresets/EchoWeightedRight=Echo Weighted Right"
"$$$/AudioComponents/EchoPresets/FormantDelay=Formant Delay"
"$$$/AudioComponents/EchoPresets/HiPassDelay=Hi-Pass Delay"
"$$$/AudioComponents/EchoPresets/InfiniteLoop=Infinite Loop"
"$$$/AudioComponents/EchoPresets/LowPassDelay=Low-Pass Delay"
"$$$/AudioComponents/EchoPresets/Spooky=Spooky"
"$$$/AudioComponents/EchoPresets/SpringyTelephone=Springy Telephone"
"$$$/AudioComponents/EchoPresets/StereoVocals=Stereo Vocals"
"$$$/AudioComponents/EchoPresets/SynthesizingSMPTE=Synthesizing SMPTE"
"$$$/AudioComponents/EchoTitle=回声"
"$$$/AudioComponents/FFTFilterPreset/CMajorTriad=C Major Triad"
"$$$/AudioComponents/FFTFilterPreset/CassetteTapeFrequencyResponse=Cassette Tape Frequency Response"
"$$$/AudioComponents/FFTFilterPreset/DeEsser=De-Esser"
"$$$/AudioComponents/FFTFilterPreset/Default=默认"
"$$$/AudioComponents/FFTFilterPreset/KillTheMicRumble=Kill The Mic Rumble"
"$$$/AudioComponents/FFTFilterTitle=FFT 滤波"
"$$$/AudioComponents/FadeEnvelopeTitle=淡化包络"
"$$$/AudioComponents/FlangerPresets/Aural=Aural"
"$$$/AudioComponents/FlangerPresets/Buzzed=Buzzed"
"$$$/AudioComponents/FlangerPresets/CrazyClock=Crazy Clock of Doom"
"$$$/AudioComponents/FlangerPresets/DansGuitar=Dan's Guitar"
"$$$/AudioComponents/FlangerPresets/FlangeVerb=FlangeVerb"
"$$$/AudioComponents/FlangerPresets/GuitarFlange=Guitar Flange"
"$$$/AudioComponents/FlangerPresets/HaightAshbury=Haight-Ashbury"
"$$$/AudioComponents/FlangerPresets/HeavyFlange=Heavy Flange"
"$$$/AudioComponents/FlangerPresets/HellsChorus=Hell's Chorus"
"$$$/AudioComponents/FlangerPresets/Jimmy=Jimmy"
"$$$/AudioComponents/FlangerPresets/LightFlange=Light Flange"
"$$$/AudioComponents/FlangerPresets/Robotic=Robotic"
"$$$/AudioComponents/FlangerPresets/Teleport=Teleport"
"$$$/AudioComponents/FlangerPresets/TonalSadness=Tonal Sadness"
"$$$/AudioComponents/FlangerPresets/TooManyPills=Too Many Pills"
"$$$/AudioComponents/FlangerPresets/VocalFlange=Vocal Flange"
"$$$/AudioComponents/FlangerPresets/YoYo=Synthetic YO-YO"
"$$$/AudioComponents/FlangerTitle=镶边"
"$$$/AudioComponents/FullReverbPresets/ChamberPot=Chamber Pot"
"$$$/AudioComponents/FullReverbPresets/Church=Church"
"$$$/AudioComponents/FullReverbPresets/EmptyLivingRoom=Empty Living Room"
"$$$/AudioComponents/FullReverbPresets/FootballReferee=Football Referee"
"$$$/AudioComponents/FullReverbPresets/FurnishedLivingRoom=Furnished Living Room"
"$$$/AudioComponents/FullReverbPresets/GhostWhispers=Ghost Whispers"
"$$$/AudioComponents/FullReverbPresets/GreatHall=Great Hall"
"$$$/AudioComponents/FullReverbPresets/Gymnasium=Gymnasium"
"$$$/AudioComponents/FullReverbPresets/Gymnasium2=Gymnasium 2"
"$$$/AudioComponents/FullReverbPresets/InTheShower=In the Shower"
"$$$/AudioComponents/FullReverbPresets/InTheShower2=In the Shower 2"
"$$$/AudioComponents/FullReverbPresets/LargeAuditorium=Large Auditorium"
"$$$/AudioComponents/FullReverbPresets/LectureHall=Lecture Hall"
"$$$/AudioComponents/FullReverbPresets/LukeWarmRoom=Luke-Warm Room"
"$$$/AudioComponents/FullReverbPresets/MartianEcho=Martian Echo"
"$$$/AudioComponents/FullReverbPresets/MediumConcertHallCrisp=Medium Concert Hall (Crisp)"
"$$$/AudioComponents/FullReverbPresets/MediumConcertHallOpen=Medium Concert Hall (Open)"
"$$$/AudioComponents/FullReverbPresets/MediumConcertHallWarm=Medium Concert Hall (Warm)"
"$$$/AudioComponents/FullReverbPresets/MediumVocalPlate=Medium Vocal Plate"
"$$$/AudioComponents/FullReverbPresets/PrincipalAddressSystem=Principal Address System"
"$$$/AudioComponents/FullReverbPresets/RichChamber=Rich Chamber"
"$$$/AudioComponents/FullReverbPresets/SmallClub=Small Club"
"$$$/AudioComponents/FullReverbPresets/SmallDryRoom=Small Dry Room"
"$$$/AudioComponents/FullReverbPresets/StereoPlate=Stereo Plate"
"$$$/AudioComponents/FullReverbPresets/TheKingBathroom=The King's Bathroom"
"$$$/AudioComponents/FullReverbPresets/TheatreCrisp=Theatre (Crisp)"
"$$$/AudioComponents/FullReverbPresets/VioliHarpsiHornHal=VioliHarpsiHornHall"
"$$$/AudioComponents/FullReverbPresets/VocalDouble=Vocal Double"
"$$$/AudioComponents/FullReverbTitle=完整混响"
"$$$/AudioComponents/GainEnvelopePresets/0dbPulse=0dB Pulse"
"$$$/AudioComponents/GainEnvelopePresets/3dbHardBump=+3dB Hard Bump"
"$$$/AudioComponents/GainEnvelopePresets/3dbSoftBump=+3dB Soft Bump"
"$$$/AudioComponents/GainEnvelopePresets/BoostAttack=Boost Attack"
"$$$/AudioComponents/GainEnvelopePresets/KeepAttackOnly=Keep Attack Only"
"$$$/AudioComponents/GainEnvelopePresets/RemoveAttack=Remove Attack"
"$$$/AudioComponents/GainEnvelopePresets/SmoothEnds=Smooth Ends"
"$$$/AudioComponents/GainEnvelopePresets/SoftenAttack=Soften Attack"
"$$$/AudioComponents/GainEnvelopePresets/Tremors=Tremors"
"$$$/AudioComponents/GainEnvelopePresets/ZigZagGain=Zig Zag Gain"
"$$$/AudioComponents/GainEnvelopeTitle=增益包络"
"$$$/AudioComponents/GenerateTonesPresets/1SecondPulses=1 Second Pulses"
"$$$/AudioComponents/GenerateTonesPresets/Bell=Bell"
"$$$/AudioComponents/GenerateTonesPresets/Chord=Chord"
"$$$/AudioComponents/GenerateTonesPresets/ChurchOrgan=Church Organ"
"$$$/AudioComponents/GenerateTonesPresets/LinearSweep=Linear Sweep (20 Hz-20 kHz)"
"$$$/AudioComponents/GenerateTonesPresets/LogSweep=Log Sweep (20 Hz-20 kHz)"
"$$$/AudioComponents/GenerateTonesPresets/MajorChord=Major Chord"
"$$$/AudioComponents/GenerateTonesPresets/MinorChord=Minor Chord"
"$$$/AudioComponents/GenerateTonesPresets/MinorToMajor=Minor to Major"
"$$$/AudioComponents/GenerateTonesPresets/ModulateExistingAudio=Modulate Existing Audio"
"$$$/AudioComponents/GenerateTonesPresets/NoteDeep=Note Deep"
"$$$/AudioComponents/GenerateTonesPresets/OutOfControl=Out Of Control"
"$$$/AudioComponents/GenerateTonesPresets/Tremolo=Tremolo"
"$$$/AudioComponents/GenerateTonesTitle=生成音色"
"$$$/AudioComponents/GraphicEQ10Title=图形均衡器 (10段)"
"$$$/AudioComponents/GraphicEQ20Presets/20BandClassicV=20 Band Classic V"
"$$$/AudioComponents/GraphicEQ20Presets/BowedString=Bowed String"
"$$$/AudioComponents/GraphicEQ20Presets/BrightAndPunchy=Bright and Punchy"
"$$$/AudioComponents/GraphicEQ20Presets/CymbalShimmer=Cymbal Shimmer"
"$$$/AudioComponents/GraphicEQ20Presets/DarkAndDull=Dark and Dull"
"$$$/AudioComponents/GraphicEQ20Presets/DestinationCarStereo=Destination - Car Stereo"
"$$$/AudioComponents/GraphicEQ20Presets/HeavyGuitar=Heavy Guitar"
"$$$/AudioComponents/GraphicEQ20Presets/LivenUpDeadSamples=Liven up dead samples"
"$$$/AudioComponents/GraphicEQ20Presets/NotchEveryOctave=Notch Every Octave"
"$$$/AudioComponents/GraphicEQ20Presets/PossibleBass=Possible Bass"
"$$$/AudioComponents/GraphicEQ20Presets/SlopingHighEndBoost=Sloping High End Boost"
"$$$/AudioComponents/GraphicEQ20Presets/SlopingLowEndBoost=Sloping Low End Boost"
"$$$/AudioComponents/GraphicEQ20Presets/TinnyAndBrittle=Tinny and Brittle"
"$$$/AudioComponents/GraphicEQ20Presets/VocalMagic=Vocal Magic (breath)"
"$$$/AudioComponents/GraphicEQ20Title=图形均衡器 (20 段)"
"$$$/AudioComponents/GraphicEQ30Title=图形均衡器 (30 段)"
"$$$/AudioComponents/GraphicPhaseShifterPreset/Default=默认"
"$$$/AudioComponents/GraphicPhaseShifterTitle=图形移相器"
"$$$/AudioComponents/GraphicQE10Presets/1965=1965"
"$$$/AudioComponents/GraphicQE10Presets/1965_2=1965 - Part 2"
"$$$/AudioComponents/GraphicQE10Presets/LoFidelity=Lo-Fidelity"
"$$$/AudioComponents/GraphicQE10Presets/MusicalPresence=Musical Presence"
"$$$/AudioComponents/GraphicQE10Presets/NotchEveryTwoOctaves=Notch Every Two Octaves"
"$$$/AudioComponents/GraphicQE10Presets/QuickHiPassFilter=Quick Hi-Pass Filter"
"$$$/AudioComponents/GraphicQE10Presets/QuickLowPassFilter=Quick Low-Pass Filter"
"$$$/AudioComponents/GraphicQE10Presets/RattleTheTrunk=Rattle The Trunk (Be Careful)"
"$$$/AudioComponents/GraphicQE10Presets/SimpleBassCut=Simple Bass Cut"
"$$$/AudioComponents/GraphicQE10Presets/SimpleBassLift=Simple Bass Lift"
"$$$/AudioComponents/GraphicQE10Presets/SimpleHighCut=Simple High Cut"
"$$$/AudioComponents/GraphicQE10Presets/SimpleHighLift=Simple High Lift"
"$$$/AudioComponents/GraphicQE10Presets/VocalPresenceBoost=Vocal Presence - Boost"
"$$$/AudioComponents/GraphicQE10Presets/VocalPresenceCut=Vocal Presence - Cut"
"$$$/AudioComponents/GraphicQE30Presets/Bass=Bass - Increased Clarity"
"$$$/AudioComponents/GraphicQE30Presets/BkgVocal=Bkg. Vocal - Separate from Lead Vocal"
"$$$/AudioComponents/GraphicQE30Presets/ClassicV=Classic V"
"$$$/AudioComponents/GraphicQE30Presets/DestinationHomeTheater=Destination - Home Theater"
"$$$/AudioComponents/GraphicQE30Presets/Drums=Drums"
"$$$/AudioComponents/GraphicQE30Presets/GenericAttackBooster=Generic Attack Booster"
"$$$/AudioComponents/GraphicQE30Presets/GenericMudRemoval=Generic Mud Removal"
"$$$/AudioComponents/GraphicQE30Presets/GentleHiBoost=Gentle Hi Boost"
"$$$/AudioComponents/GraphicQE30Presets/GentleHiCut=Gentle Hi Cut"
"$$$/AudioComponents/GraphicQE30Presets/GentleLowBoost=Gentle Low Boost"
"$$$/AudioComponents/GraphicQE30Presets/GentleLowCut=Gentle Low Cut"
"$$$/AudioComponents/GraphicQE30Presets/GentleMidBoost=Gentle Mid Boost"
"$$$/AudioComponents/GraphicQE30Presets/GentleMidCut=Gentle Mid Cut"
"$$$/AudioComponents/GraphicQE30Presets/Guitar=Guitar - Increases Attack"
"$$$/AudioComponents/GraphicQE30Presets/Keyboards=Keyboards - Bright and Clear"
"$$$/AudioComponents/GraphicQE30Presets/Kick=Kick - Less Boxy, more Attack"
"$$$/AudioComponents/GraphicQE30Presets/LeadVocal=Lead Vocal - Presence and Clarity"
"$$$/AudioComponents/GraphicQE30Presets/NotchEvery23Octave=Notch Every 2/3 Octave"
"$$$/AudioComponents/GraphicQE30Presets/RIAADeEmphasis=RIAA De-Emphasis"
"$$$/AudioComponents/GraphicQE30Presets/Snare=Snare - Increase Snap"
"$$$/AudioComponents/GraphicQE30Presets/TakeTheGongOut=Take the \"gong\" out of the cymbals"
"$$$/AudioComponents/HardLimiterPresets/DeadHorse=That's one DEAD horse"
"$$$/AudioComponents/HardLimiterPresets/Distorted=Distorted"
"$$$/AudioComponents/HardLimiterPresets/Heavy=Heavy"
"$$$/AudioComponents/HardLimiterPresets/Light=Light"
"$$$/AudioComponents/HardLimiterPresets/LimitTo-.1dB=Limit to -.1dB"
"$$$/AudioComponents/HardLimiterPresets/LimitTo-3dB=Limit to -3dB"
"$$$/AudioComponents/HardLimiterPresets/LimitTo-6dB=Limit to -6dB"
"$$$/AudioComponents/HardLimiterPresets/Medium=Medium"
"$$$/AudioComponents/HardLimiterTitle=强制限幅"
"$$$/AudioComponents/HissReductionPresets/High=High"
"$$$/AudioComponents/HissReductionPresets/Light=Light"
"$$$/AudioComponents/HissReductionTitle=削减嘶声"
"$$$/AudioComponents/IntraClipPresets/Medium=Medium"
"$$$/AudioComponents/IntraClipPresets/Soft=Soft"
"$$$/AudioComponents/IntraClipPresets/Strong=Strong"
"$$$/AudioComponents/ManualPitchCorrectionTitle=手动音高修正"
"$$$/AudioComponents/MonoToStereoTitle=单声道转立体声"
"$$$/AudioComponents/NoiseReductionTitle=降噪"
"$$$/AudioComponents/NotchPresets/100hz=100 Hz Elimination"
"$$$/AudioComponents/NotchPresets/200hzAndHarmonics=200 Hz and Harmonics (Heavy)"
"$$$/AudioComponents/NotchPresets/200hzAndOctaves=200 Hz and Octaves"
"$$$/AudioComponents/NotchPresets/400hzAndHarmonics=400 Hz and Harmonics (Heavy)"
"$$$/AudioComponents/NotchPresets/400hzAndOctaves=400 Hz and Octaves"
"$$$/AudioComponents/NotchPresets/50hzAndHarmonics=50 Hz and Harmonics (Heavy)"
"$$$/AudioComponents/NotchPresets/50hzAndHarmonicsRemoval=50 Hz and Harmonics Removal"
"$$$/AudioComponents/NotchPresets/50hzAndLowerHarmonics=50 Hz and Lower Harmonics"
"$$$/AudioComponents/NotchPresets/50hzAndOctaves=50 Hz and Octaves"
"$$$/AudioComponents/NotchPresets/60hzAndHarmonics=60 Hz and Harmonics (Heavy)"
"$$$/AudioComponents/NotchPresets/60hzAndHarmonicsRemoval=60 Hz and Harmonics Removal"
"$$$/AudioComponents/NotchPresets/60hzAndLowerHarmonics=60 Hz and Lower Harmonics"
"$$$/AudioComponents/NotchPresets/60hzAndOctaves=60 Hz and Octaves"
"$$$/AudioComponents/NotchPresets/AandE=A's and E's"
"$$$/AudioComponents/NotchPresets/Cmajor=C Major Chord"
"$$$/AudioComponents/NotchPresets/CminorThirds=Minor Thirds from C"
"$$$/AudioComponents/NotchPresets/CsharpToneScale=Whole Tone Scale from C Sharp"
"$$$/AudioComponents/NotchPresets/CtoneScale=Whole Tone Scale from C"
"$$$/AudioComponents/NotchPresets/DTMFLower=DTMF Lower Tones Removal"
"$$$/AudioComponents/NotchPresets/DTMFUpper=DTMF Upper Tones Removal"
"$$$/AudioComponents/NotchPresets/Dreamy=Dreamy"
"$$$/AudioComponents/NotchPresets/Eminor=E Minor Chord"
"$$$/AudioComponents/NotchPresets/IceCreamTruck=Ice Cream Truck"
"$$$/AudioComponents/NotchPresets/ReduceHighBleed=Reduce High Freq Timecode Bleed"
"$$$/AudioComponents/NotchPresets/ReduceLowBleed=Reduce Low Freq Timecode Bleed"
"$$$/AudioComponents/NotchPresets/Sibilance=Sibilance Softener (DeEsser)"
"$$$/AudioComponents/NotchPresets/WeaponizedDissonance=Weaponized Dissonance"
"$$$/AudioComponents/NotchTitle=陷波滤波器"
"$$$/AudioComponents/ParametricEQPresets/AcousticGuitar=Acoustic Guitar"
"$$$/AudioComponents/ParametricEQPresets/BeefySnare=Beefy Snare"
"$$$/AudioComponents/ParametricEQPresets/FullReset=Full Reset"
"$$$/AudioComponents/ParametricEQPresets/GenericHiPass=Generic Hi-Pass"
"$$$/AudioComponents/ParametricEQPresets/GenericLowPass=Generic Low-Pass"
"$$$/AudioComponents/ParametricEQPresets/HeavyGuitar=Heavy Guitar"
"$$$/AudioComponents/ParametricEQPresets/Kick=Kick"
"$$$/AudioComponents/ParametricEQPresets/LoudnessMaximizer=Loudness Maximizer"
"$$$/AudioComponents/ParametricEQPresets/OldTimeRadio=Old Time Radio"
"$$$/AudioComponents/ParametricEQPresets/RapVocals=Rap Vocals"
"$$$/AudioComponents/ParametricEQPresets/VocalEnhancer=Vocal Enhancer"
"$$$/AudioComponents/ParametricEQTitle=参数均衡器"
"$$$/AudioComponents/PitchCorrectTitle=自动音高修正"
"$$$/AudioComponents/ReverbPresets/BigDrumRoom=Big Drum Room"
"$$$/AudioComponents/ReverbPresets/BiggerRoomAmbience=Bigger Room Ambience"
"$$$/AudioComponents/ReverbPresets/DepressingKaraokeBar=Depressing Karaoke Bar"
"$$$/AudioComponents/ReverbPresets/Ethereal=Ethereal"
"$$$/AudioComponents/ReverbPresets/LiquidSpeakers=Liquid Speakers"
"$$$/AudioComponents/ReverbPresets/Megaphone=Megaphone"
"$$$/AudioComponents/ReverbPresets/PumpingReverb=Pumping Reverb"
"$$$/AudioComponents/ReverbPresets/ResonantRoomModes=Resonant Room Modes"
"$$$/AudioComponents/ReverbPresets/RoomAmbience=Room Ambience"
"$$$/AudioComponents/ReverbPresets/Thickener=Thickener"
"$$$/AudioComponents/ReverbTitle=混响"
"$$$/AudioComponents/SpeechVolumeLevelerTitle=语音音量放大"
"$$$/AudioComponents/StereoToMonoMergerTitle=立体声转单声道"
"$$$/AudioComponents/StretchPresets/CuttingPower=Cutting Power"
"$$$/AudioComponents/StretchPresets/DoubleSpeed=Double Speed"
"$$$/AudioComponents/StretchPresets/FastTalker=Fast Talker"
"$$$/AudioComponents/StretchPresets/Helium=Helium"
"$$$/AudioComponents/StretchPresets/LowerPitch=Lower Pitch"
"$$$/AudioComponents/StretchPresets/RaisePitch=Raise Pitch"
"$$$/AudioComponents/StretchPresets/SlowDown=Slow Down"
"$$$/AudioComponents/StretchPresets/SpeedUp=Speed Up"
"$$$/AudioComponents/StretchTitle=伸缩与变调"
"$$$/AudioComponents/StudioReverbPresets/DrumPlateLarge=Drum Plate (large)"
"$$$/AudioComponents/StudioReverbPresets/DrumPlateMedium=Drum Plate (medium)"
"$$$/AudioComponents/StudioReverbPresets/DrumPlateSmall=Drum Plate (small)"
"$$$/AudioComponents/StudioReverbPresets/GreatHall=Great Hall"
"$$$/AudioComponents/StudioReverbPresets/GuitarAmpMono=Guitar Amp Verb (mono)"
"$$$/AudioComponents/StudioReverbPresets/GuitarAmpStereo=Guitar Amp Verb (stereo)"
"$$$/AudioComponents/StudioReverbPresets/MasteringReverb=Mastering Reverb"
"$$$/AudioComponents/StudioReverbPresets/OutsideClub=Outside Club"
"$$$/AudioComponents/StudioReverbPresets/RoomAmbience1=Room Ambience 1"
"$$$/AudioComponents/StudioReverbPresets/RoomAmbience2=Room Ambience 2"
"$$$/AudioComponents/StudioReverbPresets/SwirlyReverb=Swirly Reverb"
"$$$/AudioComponents/StudioReverbPresets/VocalReverbLarge=Vocal Reverb (large)"
"$$$/AudioComponents/StudioReverbPresets/VocalReverbMedium=Vocal Reverb (medium)"
"$$$/AudioComponents/StudioReverbPresets/VocalReverbSmall=Vocal Reverb (small)"
"$$$/AudioComponents/StudioReverbTitle=室内混响"
"$$$/AudioComponents/VolumeEnvelopePresets/BellCurve=Bell Curve"
"$$$/AudioComponents/VolumeEnvelopePresets/KeepAttackOnly=Keep Attack Only"
"$$$/AudioComponents/VolumeEnvelopePresets/LinearFadeIn=Linear Fade In"
"$$$/AudioComponents/VolumeEnvelopePresets/LinearFadeOut=Linear Fade Out"
"$$$/AudioComponents/VolumeEnvelopePresets/Pulse=Pulse"
"$$$/AudioComponents/VolumeEnvelopePresets/RemoveAttack=Remove Attack"
"$$$/AudioComponents/VolumeEnvelopePresets/SmoothAttack=Smooth Attack"
"$$$/AudioComponents/VolumeEnvelopePresets/SmoothEnds=Smooth Ends"
"$$$/AudioComponents/VolumeEnvelopePresets/SmoothFadeIn=Smooth Fade In"
"$$$/AudioComponents/VolumeEnvelopePresets/SmoothFadeOut=Smooth Fade Out"
"$$$/AudioComponents/VolumeEnvelopePresets/SmoothRelease=Smooth Release"
"$$$/AudioComponents/VolumeEnvelopePresets/Tremors=Tremors"
"$$$/AudioComponents/VolumeEnvelopePresets/ZigZagCut=Zig Zag Cut"
"$$$/AudioPluginManager/Browse/Title=选择一个插件文件夹:"
"$$$/AudioPluginManager/DefaultFoldersWarning=重置VST插件文件夹设置为默认将删除全部自定义的已指定文件夹。打算继续吗？"
"$$$/AudioPluginManager/DialogTitle=音频插件管理器"
"$$$/AudioPluginManager/Failed=没有在工作"
"$$$/AudioPluginManager/PluginScanError=扫描插件 '@PLUGINNAME' 时发生一个错误导致 Audition 关闭。该插件将被禁用并在以后的扫描中忽略，直到它在 Audition 的音频插件管理器对话框中被手动激活。"
"$$$/AudioPluginManager/Reload=重新加载"
"$$$/AudioPluginManager/ScanPlugIns=扫描插件"
"$$$/AudioPluginManager/Working=工作中"
"$$$/Audition/AudioComponent/AudioInputComp/ComponentName=输入增益"
"$$$/Audition/Palette/Mixer/ControlSet/StereoPanKnob=立体声声场"
"$$$/Audition/Palette/Mixer/ControlSet/VolumeKnob=音量"
"$$$/AuditionSessionPlugIns/SesxNative/FormatNameSesxNative=Audition 合成项目"
"$$$/AuditionSessionPlugIns/SesxNative/PlugInName=Audition Sesx 插件"
"$$$/Audition_WIN/HeadlessAuditionAlreadyOpenMsg=Audition 已经打开。您是否要关闭前一实例并重新启动应用程序？"
"$$$/Audition_WIN/HeadlessAuditionAlreadyOpenTitle=Audition 错误"
"$$$/AutoClickRemover/Complexity=复杂性:"
"$$$/AutoClickRemover/Threshold=阈值:"
"$$$/AutoPhaseCorrection/1_0=1.0"
"$$$/AutoPhaseCorrection/1_5=1.5"
"$$$/AutoPhaseCorrection/2_0=2.0"
"$$$/AutoPhaseCorrection/2_5=2.5"
"$$$/AutoPhaseCorrection/3_0=3.0"
"$$$/AutoPhaseCorrection/3_5=3.5"
"$$$/AutoPhaseCorrection/4_0=4.0"
"$$$/AutoPhaseCorrection/4_5=4.5"
"$$$/AutoPhaseCorrection/5_0=5.0"
"$$$/AutoPhaseCorrection/AnalysisSize=分析大小:"
"$$$/AutoPhaseCorrection/AutoAlignChannelsAuto=自动对齐声道"
"$$$/AutoPhaseCorrection/AutoCenterPanning=自动中置声相"
"$$$/AutoPhaseCorrection/Channel=声道:"
"$$$/AutoPhaseCorrection/Channel/Both=两边"
"$$$/AutoPhaseCorrection/Channel/LeftOnly=仅左声道"
"$$$/AutoPhaseCorrection/Channel/RightOnly=仅右声道"
"$$$/AutoPhaseCorrection/GlobalTimeShift=全局时间变换"
"$$$/AutoPhaseCorrection/LeftChannelShift=左声道变换:"
"$$$/AutoPhaseCorrection/Responsiveness=响应性:"
"$$$/AutoPhaseCorrection/Responsiveness/Fast=快"
"$$$/AutoPhaseCorrection/Responsiveness/Medium=中等"
"$$$/AutoPhaseCorrection/Responsiveness/Slow=慢"
"$$$/AutoPhaseCorrection/Responsiveness/UltraFast=超快"
"$$$/AutoPhaseCorrection/Responsiveness/UltraSlow=超慢"
"$$$/AutoPhaseCorrection/RightChannelShift=右声道变换:"
"$$$/AutoPhaseCorrection/TimeResolution=时间分辨率（毫秒）:"
"$$$/AutoPhaseCorrection/mysec=µSec"
"$$$/BatchProcessExportDialogXML/LocationWarningTooltip=一个或多个文件无法被存储到源文件位置。这些文件将被存储到“位置”弹出菜单中的指定文件夹"
"$$$/BatchProcessExportDialogXML/OverwriteExistingFiles=覆盖现有文件"
"$$$/BatchProcessExportDialogXML/SampleTypeWarningTooltip=Audition 无法更改多轨合成中用于参考的文件采样率。执行此批处理将只更改不属于当前打开项目的任何文件的采样率。"
"$$$/BatchProcessExportDialogXML/UseSourceFileLocation=与源文件位置相同"
"$$$/BatchProcessTaskView/DragAndDropFilesHere=从文件面板拖放文件到此"
"$$$/BatchProcessTaskXML/AddFilesTT=添加文件"
"$$$/BatchProcessTaskXML/ClearAllTT=移除所有文件"
"$$$/BatchProcessTaskXML/Export=导出"
"$$$/BatchProcessTaskXML/ExportCheckboxMatchTT=匹配音量后导出文件"
"$$$/BatchProcessTaskXML/ExportCheckboxTT=应用收藏效果后导出文件"
"$$$/BatchProcessTaskXML/ExportSettings=导出设置..."
"$$$/BatchProcessTaskXML/ExportSettingsTT=打开导出设置对话框"
"$$$/BatchProcessTaskXML/RemoveFilesTT=移除选中文件"
"$$$/BatchProcessTaskXML/RunMatchTT=以已定义的设置执行匹配音量操作"
"$$$/BatchProcessTaskXML/RunTT=以已定义的设置执行批处理操作"
"$$$/CenterChannelExtractUI/Advanced=高级"
"$$$/CenterChannelExtractUI/AmpBandwidth=振幅带宽:"
"$$$/CenterChannelExtractUI/AmpDiscrimination=振幅差异:"
"$$$/CenterChannelExtractUI/Center=中置"
"$$$/CenterChannelExtractUI/CenterFreq=中置频率:"
"$$$/CenterChannelExtractUI/CenterLevel=声道电平"
"$$$/CenterChannelExtractUI/Crossover=交叉渗透:"
"$$$/CenterChannelExtractUI/Delay=延迟:"
"$$$/CenterChannelExtractUI/DiscriminationTab=差异"
"$$$/CenterChannelExtractUI/End=结束:"
"$$$/CenterChannelExtractUI/Extract=提取:"
"$$$/CenterChannelExtractUI/ExtractTab=提取"
"$$$/CenterChannelExtractUI/FrequencyRange=频率范围:"
"$$$/CenterChannelExtractUI/Overlap=叠加:"
"$$$/CenterChannelExtractUI/Pan=声相:"
"$$$/CenterChannelExtractUI/PhaseAngle=相位角度:"
"$$$/CenterChannelExtractUI/PhaseDiscrimination=相位差异:"
"$$$/CenterChannelExtractUI/PopupItem/Bass=低音"
"$$$/CenterChannelExtractUI/PopupItem/Center=中置"
"$$$/CenterChannelExtractUI/PopupItem/FFTSize1024=1024"
"$$$/CenterChannelExtractUI/PopupItem/FFTSize16384=16384"
"$$$/CenterChannelExtractUI/PopupItem/FFTSize2048=2048"
"$$$/CenterChannelExtractUI/PopupItem/FFTSize32768=32768"
"$$$/CenterChannelExtractUI/PopupItem/FFTSize4096=4096"
"$$$/CenterChannelExtractUI/PopupItem/FFTSize512=512"
"$$$/CenterChannelExtractUI/PopupItem/FFTSize8192=8192"
"$$$/CenterChannelExtractUI/PopupItem/Femal=女声"
"$$$/CenterChannelExtractUI/PopupItem/FullSpectrum=全频谱"
"$$$/CenterChannelExtractUI/PopupItem/Left=左声道"
"$$$/CenterChannelExtractUI/PopupItem/Male=男声"
"$$$/CenterChannelExtractUI/PopupItem/Overlap10=10"
"$$$/CenterChannelExtractUI/PopupItem/Overlap11=11"
"$$$/CenterChannelExtractUI/PopupItem/Overlap12=12"
"$$$/CenterChannelExtractUI/PopupItem/Overlap3=3"
"$$$/CenterChannelExtractUI/PopupItem/Overlap4=4"
"$$$/CenterChannelExtractUI/PopupItem/Overlap5=5"
"$$$/CenterChannelExtractUI/PopupItem/Overlap6=6"
"$$$/CenterChannelExtractUI/PopupItem/Overlap7=7"
"$$$/CenterChannelExtractUI/PopupItem/Overlap8=8"
"$$$/CenterChannelExtractUI/PopupItem/Overlap9=9"
"$$$/CenterChannelExtractUI/PopupItem/Right=右声道"
"$$$/CenterChannelExtractUI/PopupItem/freqCustom=自定义"
"$$$/CenterChannelExtractUI/Side=侧边声道"
"$$$/CenterChannelExtractUI/SideLevel=电平    "
"$$$/CenterChannelExtractUI/SpectralDecay=频谱衰减率:"
"$$$/CenterChannelExtractUI/Start=开始:"
"$$$/CenterChannelExtractUI/Width=宽度:"
"$$$/CenterChannelExtractUI/WindowWidth=窗口宽度:"
"$$$/CenterChannelExtractUI/fftsize=FFT 大小:"
"$$$/ChannelMixer/Inputchannel=输入声道"
"$$$/ChannelMixer/Unit/percent=%"
"$$$/ChannelMixerUI/Invert=反转"
"$$$/ChorusUI/AddCue=添加双声道提示"
"$$$/ChorusUI/AverageInput=平均左右声道输入"
"$$$/ChorusUI/Characteristics=特性"
"$$$/ChorusUI/DelayRate=延迟率:"
"$$$/ChorusUI/DelayTIme=延迟时间:"
"$$$/ChorusUI/Dry=干声:"
"$$$/ChorusUI/Feedback=回授:"
"$$$/ChorusUI/HighQuality=最高品质（应用更多处理）"
"$$$/ChorusUI/Item/0=0"
"$$$/ChorusUI/Item/1=1"
"$$$/ChorusUI/Item/10=10"
"$$$/ChorusUI/Item/11=11"
"$$$/ChorusUI/Item/12=12"
"$$$/ChorusUI/Item/13=13"
"$$$/ChorusUI/Item/14=14"
"$$$/ChorusUI/Item/15=15"
"$$$/ChorusUI/Item/16=16"
"$$$/ChorusUI/Item/2=2"
"$$$/ChorusUI/Item/3=3"
"$$$/ChorusUI/Item/4=4"
"$$$/ChorusUI/Item/5=5"
"$$$/ChorusUI/Item/6=6"
"$$$/ChorusUI/Item/7=7"
"$$$/ChorusUI/Item/8=8"
"$$$/ChorusUI/Item/9=9"
"$$$/ChorusUI/ModulationDepth=调制深度:"
"$$$/ChorusUI/ModulationRate=调制速率:"
"$$$/ChorusUI/Narrow=窄小"
"$$$/ChorusUI/OutputLevel=输出电平"
"$$$/ChorusUI/Spread=扩展:"
"$$$/ChorusUI/StereoField=立体声场:"
"$$$/ChorusUI/StereoWidth=立体声宽广度"
"$$$/ChorusUI/Voices=声音:"
"$$$/ChorusUI/Wet=湿声:"
"$$$/ChorusUI/Wide=宽广"
"$$$/ClipColorDialogXML/Hue=色调:"
"$$$/ClipPropertiesView/fps=@0 fps"
"$$$/ClipTrackView/ClipMenu/Gap=Gap"
"$$$/ClipTrackView/ClipProperties=素材属性..."
"$$$/ClipTrackView/SessionProperties=项目属性..."
"$$$/Cmd/Clip/AlignWithRubbaDubCmdDesc=Aligns the speech of one clip to the speech in another clip."
"$$$/Cmd/Clip/AlignWithRubbaDubCmdName=素材.自动对齐语音"
"$$$/Cmd/Clip/AutomaticCrossfadesCmdDesc=在选中素材移动或修剪时，是否自动创建淡化效果。"
"$$$/Cmd/Clip/AutomaticCrossfadesCmdName=素材.启用自动交叉渐变"
"$$$/Cmd/Clip/Clip.SendToBackCmdDesc=选中素材置底。"
"$$$/Cmd/Clip/Clip.SendToBackCmdName=素材置为底层"
"$$$/Cmd/Clip/ClipColorCmdDesc=显示管理选中素材或编组颜色的素材颜色对话框。"
"$$$/Cmd/Clip/ClipColorCmdName=素材.素材/编组颜色"
"$$$/Cmd/Clip/ClipGainCmdDesc=设置用于属性面板的素材增益。"
"$$$/Cmd/Clip/ClipGainCmdName=素材.素材增益"
"$$$/Cmd/Clip/ConvertToUniqueCopyCmdDesc=创建选中素材用于参考的修剪文件。"
"$$$/Cmd/Clip/ConvertToUniqueCopyCmdName=素材.转换为唯一拷贝"
"$$$/Cmd/Clip/EditSourceFileCmdDesc=编辑作为参考的选中素材的源文件。"
"$$$/Cmd/Clip/EditSourceFileCmdName=素材.编辑源文件"
"$$$/Cmd/Clip/FadeInAsymmetricalCmdDesc=选择素材淡入的非对称淡化链接类型。"
"$$$/Cmd/Clip/FadeInAsymmetricalCmdName=素材.非对称淡入"
"$$$/Cmd/Clip/FadeInCosineCmdDesc=选择素材淡入为余弦风格。"
"$$$/Cmd/Clip/FadeInCosineCmdName=素材.余弦淡入"
"$$$/Cmd/Clip/FadeInCrossfadeCmdDesc=在所选中素材的左边创建淡化效果。"
"$$$/Cmd/Clip/FadeInCrossfadeCmdName=素材.交叉淡入"
"$$$/Cmd/Clip/FadeInLinearCmdDesc=选择素材淡入为线性 / 对数风格。"
"$$$/Cmd/Clip/FadeInLinearCmdName=素材.线性淡入"
"$$$/Cmd/Clip/FadeInNoneCmdDesc=移去所选中素材内的淡入效果。"
"$$$/Cmd/Clip/FadeInNoneCmdName=素材.不淡入"
"$$$/Cmd/Clip/FadeInNormalCmdDesc=创建所选中素材的淡入效果。"
"$$$/Cmd/Clip/FadeInNormalCmdName=素材.正常淡入"
"$$$/Cmd/Clip/FadeInSymmetricalCmdDesc=选择素材淡入的链接类型为对称淡化效果。"
"$$$/Cmd/Clip/FadeInSymmetricalCmdName=素材.对称淡入"
"$$$/Cmd/Clip/FadeOutAsymmetricalCmdDesc=选择素材淡出的链接类型为非对称淡化效果。"
"$$$/Cmd/Clip/FadeOutAsymmetricalCmdName=素材.非对称淡出"
"$$$/Cmd/Clip/FadeOutCosineCmdDesc=选择素材淡出为余弦风格。"
"$$$/Cmd/Clip/FadeOutCosineCmdName=素材.余弦淡出"
"$$$/Cmd/Clip/FadeOutCrossfadeCmdDesc=在所选中素材的右边创建淡化效果。"
"$$$/Cmd/Clip/FadeOutCrossfadeCmdName=素材.交叉淡出"
"$$$/Cmd/Clip/FadeOutLinearCmdDesc=选择素材淡出为线性 / 对数风格。"
"$$$/Cmd/Clip/FadeOutLinearCmdName=素材.线性淡出"
"$$$/Cmd/Clip/FadeOutNoneCmdDesc=移去所选中素材的淡出效果。"
"$$$/Cmd/Clip/FadeOutNoneCmdName=素材.不淡出"
"$$$/Cmd/Clip/FadeOutNormalCmdDesc=创建选中素材的淡出效果。"
"$$$/Cmd/Clip/FadeOutNormalCmdName=素材.正常淡出"
"$$$/Cmd/Clip/FadeOutSymmetricalCmdDesc=选择素材淡出的链接类型为对称淡化效果。"
"$$$/Cmd/Clip/FadeOutSymmetricalCmdName=素材.对称淡出"
"$$$/Cmd/Clip/GroupClipsCmdDesc=选中素材是否属于一个编组开关。"
"$$$/Cmd/Clip/GroupClipsCmdName=素材.编组素材"
"$$$/Cmd/Clip/LinkAllMediaCmdDesc=重新链接媒体与所有脱机素材。"
"$$$/Cmd/Clip/LinkAllMediaCmdName=素材.链接所有媒体"
"$$$/Cmd/Clip/LinkMediaCmdDesc=重新链接媒体与所选中的脱机素材。"
"$$$/Cmd/Clip/LinkMediaCmdName=素材.链接媒体"
"$$$/Cmd/Clip/LockInTimeCmdDesc=锁定所选中素材的起始时间。"
"$$$/Cmd/Clip/LockInTimeCmdName=素材.锁定时间"
"$$$/Cmd/Clip/LoopCmdDesc=启用素材循环。"
"$$$/Cmd/Clip/LoopCmdName=素材.循环"
"$$$/Cmd/Clip/MatchClipVolumeCmdDesc=匹配一组素材的音量。"
"$$$/Cmd/Clip/MatchClipVolumeCmdName=素材.匹配素材音量"
"$$$/Cmd/Clip/MuteCmdDesc=使所选中素材静音。"
"$$$/Cmd/Clip/MuteCmdName=素材.静音"
"$$$/Cmd/Clip/NudgeLeft5CmdDesc=选中素材向左微移5帧（在吸附到帧被激活时以帧为移动依据）。"
"$$$/Cmd/Clip/NudgeLeft5CmdName=素材.向左微移 5 帧"
"$$$/Cmd/Clip/NudgeLeftCmdDesc=微移选中素材到左侧（在吸附到帧被激活时即以帧为移动依据）。"
"$$$/Cmd/Clip/NudgeLeftCmdName=素材.向左微移"
"$$$/Cmd/Clip/NudgeRight5CmdDesc=选中素材向右微移5帧（在吸附到帧被激活时以帧为移动依据）。"
"$$$/Cmd/Clip/NudgeRight5CmdName=素材.向右 5 帧"
"$$$/Cmd/Clip/NudgeRightCmdDesc=微移选中素材到右侧（在吸附到帧被激活时即以帧为移动依据）。"
"$$$/Cmd/Clip/NudgeRightCmdName=素材.向右微移"
"$$$/Cmd/Clip/RemoveClipFromGroupCmdDesc=从当前编组移除焦点素材。"
"$$$/Cmd/Clip/RemoveClipFromGroupCmdName=素材.从编组移除焦点素材"
"$$$/Cmd/Clip/RenameCmdDesc=重命名用于属性面板的选中素材。"
"$$$/Cmd/Clip/RenameCmdName=素材.重命名"
"$$$/Cmd/Clip/RevealClipsInFilesPanelCmd=素材.在文件面板中显示素材"
"$$$/Cmd/Clip/RevealClipsInFilesPanelCmdDesc=在文件面板中显示选中素材源文件。"
"$$$/Cmd/Clip/SplitCmdDesc=拆分选中的素材。"
"$$$/Cmd/Clip/SplitCmdName=素材.拆分"
"$$$/Cmd/Clip/StretchPropertiesCmdDesc=在属性面板调整素材伸缩属性。"
"$$$/Cmd/Clip/StretchPropertiesCmdName=素材.伸缩属性"
"$$$/Cmd/Clip/SuspendGroupingCmdDesc=A global toggle to suspend the auto-selection of groups.  This allows individual selection of clips within a group."
"$$$/Cmd/Clip/SuspendGroupingCmdName=素材.挂起编组"
"$$$/Cmd/Clip/TrimToTimeSelectionCmdDesc=修剪选中素材到时间选区。"
"$$$/Cmd/Clip/TrimToTimeSelectionCmdName=素材.修剪到时间选区"
"$$$/Cmd/Clip/UngroupSelectedClipsCmdDesc=从各自编组移除选中素材。"
"$$$/Cmd/Clip/UngroupSelectedClipsCmdName=素材.解散选中素材"
"$$$/Cmd/Edit/.AdjustSelectionInwardCmdDesc=向内调节选区。"
"$$$/Cmd/Edit/.AdjustSelectionInwardCmdName=编辑.向内调节选区"
"$$$/Cmd/Edit/ActivateClipboard1CmdDesc=Sets the current clipboard to be clipboard 1."
"$$$/Cmd/Edit/ActivateClipboard1CmdName=Edit.Activate Clipboard 1"
"$$$/Cmd/Edit/ActivateClipboard2CmdDesc=Sets the current clipboard to be clipboard 2."
"$$$/Cmd/Edit/ActivateClipboard2CmdName=Edit.Activate Clipboard 2"
"$$$/Cmd/Edit/ActivateClipboard3CmdDesc=Sets the current clipboard to be clipboard 3."
"$$$/Cmd/Edit/ActivateClipboard3CmdName=Edit.Activate Clipboard 3"
"$$$/Cmd/Edit/ActivateClipboard4CmdDesc=Sets the current clipboard to be clipboard 4."
"$$$/Cmd/Edit/ActivateClipboard4CmdName=Edit.Activate Clipboard 4"
"$$$/Cmd/Edit/ActivateClipboard5CmdDesc=Sets the current clipboard to be clipboard 5."
"$$$/Cmd/Edit/ActivateClipboard5CmdName=Edit.Activate Clipboard 5"
"$$$/Cmd/Edit/AddCDTrackMarkerCmdDesc=Adds a CD track marker."
"$$$/Cmd/Edit/AddCDTrackMarkerCmdName=Edit.Add CD Track Marker"
"$$$/Cmd/Edit/AddCartMarkerCmdDesc=Adds a cart timer marker."
"$$$/Cmd/Edit/AddCartMarkerCmdName=Edit.Add Cart Timer Marker"
"$$$/Cmd/Edit/AddCueMarkerCmdDesc=Adds a cue marker."
"$$$/Cmd/Edit/AddCueMarkerCmdName=Edit.Add Cue Marker"
"$$$/Cmd/Edit/AddCuePointMarkerCmdDesc=Adds a cue point marker."
"$$$/Cmd/Edit/AddCuePointMarkerCmdName=Edit.Add Cue Point Marker"
"$$$/Cmd/Edit/AddCueRangeMarkerCmdDesc=Adds a cue range marker."
"$$$/Cmd/Edit/AddCueRangeMarkerCmdName=Edit.Add Cue Range Marker"
"$$$/Cmd/Edit/AddSubclipMarkerCmdDesc=Adds a subclip marker."
"$$$/Cmd/Edit/AddSubclipMarkerCmdName=Edit.Add Subclip Marker"
"$$$/Cmd/Edit/AdjustInPointToBeginningCmdDesc=调节选区的入点到开始。"
"$$$/Cmd/Edit/AdjustInPointToBeginningCmdName=编辑.调节入点到开始"
"$$$/Cmd/Edit/AdjustInPointToEndCmdDesc=调节选区的入点到结束。"
"$$$/Cmd/Edit/AdjustInPointToEndCmdName=编辑.调节入点到结束"
"$$$/Cmd/Edit/AdjustInPointToLeftCmdDesc=调节选区的入点到左侧。"
"$$$/Cmd/Edit/AdjustInPointToLeftCmdName=编辑.调节入点到左侧"
"$$$/Cmd/Edit/AdjustInPointToRightCmdDesc=调节选区的入点到右侧。"
"$$$/Cmd/Edit/AdjustInPointToRightCmdName=编辑.调节入点到右侧"
"$$$/Cmd/Edit/AdjustLeftSideToLeftCmdDesc=从左侧向左调节。"
"$$$/Cmd/Edit/AdjustLeftSideToLeftCmdName=编辑.从左侧向左调节"
"$$$/Cmd/Edit/AdjustLeftSideToRightCmdDesc=从左侧向右调节。"
"$$$/Cmd/Edit/AdjustLeftSideToRightCmdName=编辑.从左侧向右调节"
"$$$/Cmd/Edit/AdjustOutPointToBeginningCmdDesc=调节选区的出点到开始。"
"$$$/Cmd/Edit/AdjustOutPointToBeginningCmdName=编辑.调节出点到开始"
"$$$/Cmd/Edit/AdjustOutPointToEndCmdDesc=调节选区的出点到结束。"
"$$$/Cmd/Edit/AdjustOutPointToEndCmdName=编辑.调节出点到结束"
"$$$/Cmd/Edit/AdjustOutPointToLeftCmdDesc=调节选区的出点到左侧。"
"$$$/Cmd/Edit/AdjustOutPointToLeftCmdName=编辑.调节出点到左侧"
"$$$/Cmd/Edit/AdjustOutPointToRightCmdDesc=调节选区的出点到右侧。"
"$$$/Cmd/Edit/AdjustOutPointToRightCmdName=编辑.调节出点到右侧"
"$$$/Cmd/Edit/AdjustRightSideToLeftCmdDesc=从右侧向左调节。"
"$$$/Cmd/Edit/AdjustRightSideToLeftCmdName=编辑.从右侧向左调节"
"$$$/Cmd/Edit/AdjustRightSideToRightCmdDesc=从右侧向右调节。"
"$$$/Cmd/Edit/AdjustRightSideToRightCmdName=编辑.从右侧向右调节"
"$$$/Cmd/Edit/AdjustSelectionOutwardCmdDesc=向外调节选区。"
"$$$/Cmd/Edit/AdjustSelectionOutwardCmdName=编辑.向外调节选区"
"$$$/Cmd/Edit/ChangeStretchModeOffCmdDesc=Change the current selected clips stretch mode to Off."
"$$$/Cmd/Edit/ChangeStretchModeOffCmdName=Edit.Change Stretch Mode to Off"
"$$$/Cmd/Edit/ChangeStretchModeRealtimeCmdDesc=Change the current selected clips stretch mode to Realtime."
"$$$/Cmd/Edit/ChangeStretchModeRealtimeCmdName=Edit.Change Stretch Mode to Realtime"
"$$$/Cmd/Edit/ChangeStretchModeRenderedCmdDesc=Change the current selected clips stretch mode to Rendered."
"$$$/Cmd/Edit/ChangeStretchModeRenderedCmdName=Edit.Change Stretch Mode to Rendered"
"$$$/Cmd/Edit/ClearTimeSelectionCmdDesc=清除时间选区而不改变时间指示器的位置。"
"$$$/Cmd/Edit/ClearTimeSelectionCmdName=编辑.清除时间选区"
"$$$/Cmd/Edit/ConvertSampleTypeCmdDesc=转换当前文件的采样类型。"
"$$$/Cmd/Edit/ConvertSampleTypeCmdName=编辑.转换采样类型"
"$$$/Cmd/Edit/CopyCmdDesc=复制当前选择到剪贴板。"
"$$$/Cmd/Edit/CopyCmdName=编辑.复制"
"$$$/Cmd/Edit/CopyToNewCmdDesc=复制当前选择内容到剪贴板并粘贴到新建文件中。"
"$$$/Cmd/Edit/CopyToNewCmdName=编辑.复制为新建文件"
"$$$/Cmd/Edit/CropCmdDesc=裁剪当前选择的文件。"
"$$$/Cmd/Edit/CropCmdName=编辑.裁剪"
"$$$/Cmd/Edit/CutCmdDesc=剪切当前选择。"
"$$$/Cmd/Edit/CutCmdName=编辑.剪切"
"$$$/Cmd/Edit/DeleteAllMarkersCmdDesc=删除当前文件的所有标记。"
"$$$/Cmd/Edit/DeleteAllMarkersCmdName=编辑.删除所有标记"
"$$$/Cmd/Edit/DeleteCmdDesc=删除当前选择 - 取决于关联。"
"$$$/Cmd/Edit/DeleteCmdName=编辑.删除"
"$$$/Cmd/Edit/DeleteSelectedMarkersCmdDesc=删除标记面板内选中的标记。"
"$$$/Cmd/Edit/DeleteSelectedMarkersCmdName=编辑.删除所选中标记"
"$$$/Cmd/Edit/DeleteTrackKeyframesCmdDesc=删除当前选中的轨道关键帧。"
"$$$/Cmd/Edit/DeleteTrackKeyframesCmdName=编辑.删除轨道关键帧"
"$$$/Cmd/Edit/EditOriginalCmdDesc=打开创建此文件的原始项目。"
"$$$/Cmd/Edit/EditOriginalCmdName=编辑.编辑原始资源"
"$$$/Cmd/Edit/ExportMarkerRangesCmdDesc=导出选中范围标记的音频为分离文件。"
"$$$/Cmd/Edit/ExportMarkerRangesCmdName=编辑.导出范围标记内的音频"
"$$$/Cmd/Edit/GenerateTonesCmdDesc=Creates specified tone as a new file."
"$$$/Cmd/Edit/GenerateTonesCmdName=Effects.Generate Tones"
"$$$/Cmd/Edit/ImportAndInsertFilesAsCDTracksCmdDesc=Imports the specified files and inserts them into the active CD Layout as a CD tracks."
"$$$/Cmd/Edit/ImportAndInsertFilesAsCDTracksCmdName=Edit.Import and Insert Files as CD Tracks"
"$$$/Cmd/Edit/InsertIntoNewCDCmdDesc=Inserts the active file into a new CD Layout."
"$$$/Cmd/Edit/InsertIntoNewCDCmdName=Edit.Insert into New CD Layout"
"$$$/Cmd/Edit/InsertIntoNewSessionCmdDesc=插入活动文件到一个新建多轨项目。"
"$$$/Cmd/Edit/InsertIntoNewSessionCmdName=编辑.插入到新建项目"
"$$$/Cmd/Edit/InsertIntoSessionCmdDesc=插入当前活动文件或选区到多个最近使用的多轨项目中，如果没有项目则新建一个。"
"$$$/Cmd/Edit/InsertIntoSessionCmdName=编辑.插入到多轨项目"
"$$$/Cmd/Edit/InsertSelectedRangeMarkersIntoPlaylistCmdDesc=插入标记面板内选中的范围标记到播放列表。"
"$$$/Cmd/Edit/InsertSelectedRangeMarkersIntoPlaylistCmdName=编辑.插入选中的范围标记到播放列表中。"
"$$$/Cmd/Edit/InsertSilenceCmdDesc=插入静音到当前文件。"
"$$$/Cmd/Edit/InsertSilenceCmdName=编辑.插入静音"
"$$$/Cmd/Edit/InterpretSampleRateCmdDesc=解释用于回放的当前文件采样率。"
"$$$/Cmd/Edit/InterpretSampleRateCmdName=编辑.解释采样率"
"$$$/Cmd/Edit/MergeSelectedMarkersCmdDesc=合并标记面板内选中的标记到一个或多个范围标记中。"
"$$$/Cmd/Edit/MergeSelectedMarkersCmdName=编辑.合并选中的标记"
"$$$/Cmd/Edit/MixPasteCmdDesc=混合剪贴板的内容粘贴到文件中。"
"$$$/Cmd/Edit/MixPasteCmdName=编辑.混合式粘贴"
"$$$/Cmd/Edit/MoveCTIToNextCmdDesc=移动时间指示器到下一兴趣点， 相对于指示器位置。"
"$$$/Cmd/Edit/MoveCTIToNextCmdName=走带.移动时间指示器到下一点"
"$$$/Cmd/Edit/MoveCTIToPreviousCmdDesc=移动时间指示器到前一兴趣点， 相对于指示器位置。"
"$$$/Cmd/Edit/MoveCTIToPreviousCmdName=走带.移动时间指示器到前一点"
"$$$/Cmd/Edit/OpenBatchProcessPanelCmdDesc=打开批处理面板"
"$$$/Cmd/Edit/OpenBatchProcessPanelCmdName=编辑.批处理"
"$$$/Cmd/Edit/PasteCmdDesc=粘贴剪贴板内容到文件中。"
"$$$/Cmd/Edit/PasteCmdName=编辑.粘贴"
"$$$/Cmd/Edit/PasteToNewCmdDesc=粘贴剪贴板内容到一个新建文件中。"
"$$$/Cmd/Edit/PasteToNewCmdName=编辑.粘贴到新建文件"
"$$$/Cmd/Edit/RealtimeAllStretchedClipsCmdDesc=将全部伸缩素材由渲染处理切换为实时处理。"
"$$$/Cmd/Edit/RealtimeAllStretchedClipsCmdName=编辑.实时处理全部伸缩素材"
"$$$/Cmd/Edit/RedoCmdDesc=重做最后一次操作。"
"$$$/Cmd/Edit/RedoCmdName=编辑.重做"
"$$$/Cmd/Edit/RemoveSelectionCmdDesc=移除选择的内容。在多轨合成编辑器中，取消选择所有素材。在波形编辑器中，取消选择所有音频样本。"
"$$$/Cmd/Edit/RemoveSelectionCmdName=编辑.取消全选"
"$$$/Cmd/Edit/RenameSelectedMarkerCmdDesc=重命名标记面板内选中的标记。"
"$$$/Cmd/Edit/RenameSelectedMarkerCmdName=编辑.重命名选中标记。"
"$$$/Cmd/Edit/RenderAllStretchedClipsCmdDesc=Renderes all clips with realtime stretches."
"$$$/Cmd/Edit/RenderAllStretchedClipsCmdName=Edit.Render All Stretched Clips"
"$$$/Cmd/Edit/RepeatLastCommandCmdDesc=Repeats the last command chosen.  If appropriate, will show dialog so you can adjust settings before applying."
"$$$/Cmd/Edit/RepeatLastCommandCmdName=编辑.重复上一次操作"
"$$$/Cmd/Edit/RepeatLastCommandNoUICmdDesc=重复上一次操作指令选择。将不显示任何对话框。"
"$$$/Cmd/Edit/RepeatLastCommandNoUICmdName=编辑.重复上一次操作（无对话框）"
"$$$/Cmd/Edit/RippleDeleteClipsCmdDesc=删除选定的素材并移动内容以填满空隙。"
"$$$/Cmd/Edit/RippleDeleteClipsCmdName=编辑.波纹删除：选定的素材"
"$$$/Cmd/Edit/RippleDeleteTimeInAllTracksCmdDesc=删除所有轨道内的时间选区并移动内容以填满空隙。"
"$$$/Cmd/Edit/RippleDeleteTimeInAllTracksCmdName=编辑.波纹删除：所有轨道内的时间选区"
"$$$/Cmd/Edit/RippleDeleteTimeInSelectedClipsCmdDesc=删除选定素材内的时间选区并移动内容以填满空隙。"
"$$$/Cmd/Edit/RippleDeleteTimeInSelectedClipsCmdName=编辑.波纹删除：已选定素材内的时间选区"
"$$$/Cmd/Edit/RippleDeleteTimeInSelectedTrackCmdDesc=删除选定轨道内的时间选区并移动内容以填满空隙。"
"$$$/Cmd/Edit/RippleDeleteTimeInSelectedTrackCmdName=编辑.波纹删除：所选定轨道内的时间选区"
"$$$/Cmd/Edit/SelectAllCmdDesc=选择所有活动面板中的内容。在多轨编辑器中，选择所有素材。在波形编辑器中，选择所有音频样本。"
"$$$/Cmd/Edit/SelectAllCmdName=编辑.全选"
"$$$/Cmd/Edit/SelectAllTimeCmdDesc=创建套选活动面板内所有内容的时间选区。"
"$$$/Cmd/Edit/SelectAllTimeCmdName=编辑.选择所有时间"
"$$$/Cmd/Edit/SelectClipsInSelectedTrackCmdDesc=选择已选定轨道内的所有素材。"
"$$$/Cmd/Edit/SelectClipsInSelectedTrackCmdName=编辑.选择已选定轨道内的所有素材"
"$$$/Cmd/Edit/SelectClipsToEndOfSelectedTrack=选择选中声轨内指示器以后的素材。Selects clips after the playhead in the selected track."
"$$$/Cmd/Edit/SelectClipsToEndOfSelectedTrackCmdName=编辑.选择选中声轨到结束的素材"
"$$$/Cmd/Edit/SelectCurrentViewCmdDesc=创建活动面板内已套选可见内容的时间选区。"
"$$$/Cmd/Edit/SelectCurrentViewCmdName=编辑.选择当前视图时间"
"$$$/Cmd/Edit/SelectNextClipInSelectedTrackCmdDesc=选择选中声轨内的下一个素材。"
"$$$/Cmd/Edit/SelectNextClipInSelectedTrackCmdName=编辑.选择选中声轨内的下一个素材"
"$$$/Cmd/Edit/SetInPointCmdDesc=移动选区入点到时间指示器位置。"
"$$$/Cmd/Edit/SetInPointCmdName=编辑.设置入点到指示器"
"$$$/Cmd/Edit/SetOutPointCmdDesc=移动选区出点到时间指示器位置。"
"$$$/Cmd/Edit/SetOutPointCmdName=编辑.设置出点到指示器"
"$$$/Cmd/Edit/Shortcuts=自定义键盘快捷键。"
"$$$/Cmd/Edit/ShortcutsCmdName=编辑.键盘快捷键"
"$$$/Cmd/Edit/SplitToMonoCmdDesc=提取声道为单声道文件。"
"$$$/Cmd/Edit/SplitToMonoCmdName=编辑.提取声道为单声道文件"
"$$$/Cmd/Edit/ToggleAllChannelsCmdDesc=切换所有声道的启用状态。"
"$$$/Cmd/Edit/ToggleAllChannelsCmdName=编辑.所有声道"
"$$$/Cmd/Edit/ToggleCenterChannelCmdDesc=切换中置声道的启用状态。"
"$$$/Cmd/Edit/ToggleCenterChannelCmdName=编辑.中置声道"
"$$$/Cmd/Edit/ToggleClipStretchingCmdDesc=切换素材伸缩柄的可见状态。"
"$$$/Cmd/Edit/ToggleClipStretchingCmdName=编辑.全局素材伸缩"
"$$$/Cmd/Edit/ToggleFrontLeftChannelCmdDesc=切换前左声道的启用状态。"
"$$$/Cmd/Edit/ToggleFrontLeftChannelCmdName=编辑.前左声道"
"$$$/Cmd/Edit/ToggleFrontRightChannelCmdDesc=切换前右声道的启用状态。"
"$$$/Cmd/Edit/ToggleFrontRightChannelCmdName=编辑.前右声道"
"$$$/Cmd/Edit/ToggleLFEChannelCmdDesc=切换低频效果声道的启用状态。"
"$$$/Cmd/Edit/ToggleLFEChannelCmdName=编辑.重低音声道"
"$$$/Cmd/Edit/ToggleLeftSurroundChannelCmdDesc=切换左环绕声道的启用状态。"
"$$$/Cmd/Edit/ToggleLeftSurroundChannelCmdName=编辑.左环绕声道"
"$$$/Cmd/Edit/ToggleRightSurroundChannelCmdDesc=切换右环绕声道的启用状态。"
"$$$/Cmd/Edit/ToggleRightSurroundChannelCmdName=编辑.右环绕声道"
"$$$/Cmd/Edit/ToggleShowStatusBarDocModalErrorsWarningsCmdDesc=切换状态栏中的文件错误，警告，以及处理状态的可见性。"
"$$$/Cmd/Edit/ToggleShowStatusBarDocModalErrorsWarningsCmdName=视图.状态栏文件状态显示"
"$$$/Cmd/Edit/ToggleShowStatusBarDroppedAudioCmdDesc=切换状态栏中已丢弃音频的可见性。"
"$$$/Cmd/Edit/ToggleShowStatusBarDroppedAudioCmdName=视图.状态栏已丢弃音频的显示"
"$$$/Cmd/Edit/ToggleShowStatusBarDurationCmdDesc=切换状态栏中时间长度信息的可见性。"
"$$$/Cmd/Edit/ToggleShowStatusBarDurationCmdName=视图.状态栏持续时间显示"
"$$$/Cmd/Edit/ToggleShowStatusBarFreeSpaceCmdDesc=切换状态栏中空闲空间信息的可见性。"
"$$$/Cmd/Edit/ToggleShowStatusBarFreeSpaceCmdName=视图.状态栏空闲空间显示"
"$$$/Cmd/Edit/ToggleShowStatusBarFreeSpaceTimeCmdDesc=切换状态栏中空闲空间（显示在时间条目内）信息的可见性。"
"$$$/Cmd/Edit/ToggleShowStatusBarFreeSpaceTimeCmdName=视图.状态栏空闲空间（时间）显示"
"$$$/Cmd/Edit/ToggleShowStatusBarSampleTypeCmdDesc=切换状态栏中采样类型信息的可见性。"
"$$$/Cmd/Edit/ToggleShowStatusBarSampleTypeCmdName=视图.状态栏采样类型显示"
"$$$/Cmd/Edit/ToggleShowStatusBarUncompressedAudioSizeCmdDesc=切换状态栏中无压缩音频大小信息的可见性。"
"$$$/Cmd/Edit/ToggleShowStatusBarUncompressedAudioSizeCmdName=视图.状态栏无压缩音频大小显示"
"$$$/Cmd/Edit/ToggleShowStatusBarVideoFrameRateCmdDesc=切换状态栏内视频帧速率的可见性。"
"$$$/Cmd/Edit/ToggleShowStatusBarVideoFrameRateCmdName=视图.状态栏视频帧速率显示"
"$$$/Cmd/Edit/ToggleSnapToClipsCmdDesc=切换是否吸附到素材。"
"$$$/Cmd/Edit/ToggleSnapToClipsCmdName=编辑.吸附到素材"
"$$$/Cmd/Edit/ToggleSnapToFramesCmdDesc=在查看每帧时间格式时，是否切换吸附到帧。"
"$$$/Cmd/Edit/ToggleSnapToFramesCmdName=编辑.吸附到帧"
"$$$/Cmd/Edit/ToggleSnapToLoopsCmdDesc=切换是否吸附到循环边界。"
"$$$/Cmd/Edit/ToggleSnapToLoopsCmdName=编辑.吸附到循环"
"$$$/Cmd/Edit/ToggleSnapToMarkersCmdDesc=切换是否吸附到标记。"
"$$$/Cmd/Edit/ToggleSnapToMarkersCmdName=编辑.吸附到标记"
"$$$/Cmd/Edit/ToggleSnapToRulerCoarseCmdDesc=切换是否吸附到主要标尺标记。"
"$$$/Cmd/Edit/ToggleSnapToRulerCoarseCmdName=编辑.吸附到标尺（粗略）"
"$$$/Cmd/Edit/ToggleSnapToRulerFineCmdDesc=切换是否吸附到所有标尺标记。"
"$$$/Cmd/Edit/ToggleSnapToRulerFineCmdName=编辑.吸附到标尺（精细）"
"$$$/Cmd/Edit/ToggleSnapToZeroCrossingsCmdDesc=切换是否吸附到零交叉。"
"$$$/Cmd/Edit/ToggleSnapToZeroCrossingsCmdName=编辑.吸附到零交叉"
"$$$/Cmd/Edit/ToggleSnappingCmdDesc=切换所有时间线吸附开/关。"
"$$$/Cmd/Edit/ToggleSnappingCmdName=编辑.吸附开关"
"$$$/Cmd/Edit/UndoCmdDesc=撤销最后操作。"
"$$$/Cmd/Edit/UndoCmdName=编辑.撤销"
"$$$/Cmd/Editor/AudioChannelMappingDesc=在首选项对话框打开音频声道映射面板。"
"$$$/Cmd/Editor/UserInterfaceDesc=在首选项对话框打开外观界面设置面板。"
"$$$/Cmd/Effects/AdaptiveNoiseReductionCmdDesc=处理自适应降噪。"
"$$$/Cmd/Effects/AdaptiveNoiseReductionCmdName=效果.自适应降噪"
"$$$/Cmd/Effects/AmplifyCmdDesc=波形的振幅通道。"
"$$$/Cmd/Effects/AmplifyCmdName=效果.振幅"
"$$$/Cmd/Effects/AnalogDelayCmdDesc=添加模拟延迟到波形。"
"$$$/Cmd/Effects/AnalogDelayCmdName=效果.模拟延迟"
"$$$/Cmd/Effects/AutoClickRemoverCmdDesc=移除波形中的咔嗒声。"
"$$$/Cmd/Effects/AutoClickRemoverCmdName=效果.自动咔嗒声移除"
"$$$/Cmd/Effects/AutoPhaseCorrectionCmdDesc=校正立体声波形的相位。"
"$$$/Cmd/Effects/AutoPhaseCorrectionCmdName=效果.自动相位校正"
"$$$/Cmd/Effects/CaptureDynamicNoiseRedmovalProfileCmdName=效果.采集动态噪声样本"
"$$$/Cmd/Effects/CaptureDynamicNoiseRemovalProfileCmdDesc=采集波形中的动态噪声样本。"
"$$$/Cmd/Effects/CaptureNoiseReductionProfileCmdDesc=波形中的噪声样本。"
"$$$/Cmd/Effects/CaptureNoiseReductionProfileCmdName=效果.采集噪声样本"
"$$$/Cmd/Effects/CenterChannelExtractCmdDesc=提取中置声道。"
"$$$/Cmd/Effects/CenterChannelExtractCmdName=效果.中置声道提取器"
"$$$/Cmd/Effects/ChannelMixerCmdDesc=混合声道。"
"$$$/Cmd/Effects/ChannelMixerCmdName=效果.声道混合器"
"$$$/Cmd/Effects/ChorusCmdDesc=添加和声效果到波形。"
"$$$/Cmd/Effects/ChorusCmdName=效果.和声"
"$$$/Cmd/Effects/ChorusFlangerCmdDesc=添加和声/镶边效果到波形。"
"$$$/Cmd/Effects/ChorusFlangerCmdName=效果.和声/镶边"
"$$$/Cmd/Effects/ClickPopEliminatorAnalysisCmdName=效果.消除咔嗒声（处理）"
"$$$/Cmd/Effects/ClickPopEliminatorAnalysisCmdNameDesc=分析并修复波形中的咔嗒声/爆音缺陷。"
"$$$/Cmd/Effects/ClipRestorationAnalysisCmdName=效果.修复限幅失真（处理）"
"$$$/Cmd/Effects/ClipRestorationAnalysisCmdNameDesc=分析并修复波形中的已限幅样本。"
"$$$/Cmd/Effects/ConvolutionReverbCmdDesc=添加卷积混响到波形。"
"$$$/Cmd/Effects/ConvolutionReverbCmdName=效果.卷积混响"
"$$$/Cmd/Effects/DeEsserCmdDesc=添加消除齿音到波形。"
"$$$/Cmd/Effects/DeEsserCmdName=效果.消除齿音"
"$$$/Cmd/Effects/DeHummerCmdDesc=添加消除嗡嗡声到波形。"
"$$$/Cmd/Effects/DeHummerCmdName=效果.消除嗡嗡声"
"$$$/Cmd/Effects/DelayCmdDesc=添加延迟到波形。"
"$$$/Cmd/Effects/DelayCmdName=效果.延迟"
"$$$/Cmd/Effects/DeleteAllEffectsCmdDesc=删除效果架的所有效果。"
"$$$/Cmd/Effects/DeleteAllEffectsCmdName=效果.删除所有效果"
"$$$/Cmd/Effects/DeleteSelectedEffectsCmdDesc=删除效果架已选中的效果。"
"$$$/Cmd/Effects/DeleteSelectedEffectsCmdName=效果.删除选中效果"
"$$$/Cmd/Effects/DeleteSilenceAnalysisCmdName=效果.删除静音（破坏性处理）"
"$$$/Cmd/Effects/DeleteSilenceAnalysisCmdNameDesc=分析并移除波形中的静音。"
"$$$/Cmd/Effects/DistortionCmdDesc=添加失真效果到波形。"
"$$$/Cmd/Effects/DistortionCmdName=效果.失真"
"$$$/Cmd/Effects/DopplerCmdDesc=应用多普勒效果到波形"
"$$$/Cmd/Effects/DopplerCmdName=效果.多普勒频移"
"$$$/Cmd/Effects/DynamicsCmdDesc=处理波形动态。"
"$$$/Cmd/Effects/DynamicsCmdName=效果.动态"
"$$$/Cmd/Effects/EchoCmdDesc=添加回声效果到波形。"
"$$$/Cmd/Effects/EchoCmdName=效果.回声"
"$$$/Cmd/Effects/EditSelectedEffectCmdDesc=编辑选中的效果架内的效果。"
"$$$/Cmd/Effects/EditSelectedEffectCmdName=效果.编辑已选中的效果"
"$$$/Cmd/Effects/FFTFilterCmdDesc=应用 FFT 滤波效果到波形。"
"$$$/Cmd/Effects/FFTFilterCmdName=效果.FFT 滤波"
"$$$/Cmd/Effects/FadeEnvelopeProcessCmdDesc=使用增益百分比例处理淡化包络。"
"$$$/Cmd/Effects/FadeEnvelopeProcessCmdName=效果.淡化包络（破坏性处理）"
"$$$/Cmd/Effects/FlangerCmdDesc=添加镶边效果到波形。"
"$$$/Cmd/Effects/FlangerCmdName=效果.镶边"
"$$$/Cmd/Effects/FullReverbCmdDesc=添加混响效果到波形。"
"$$$/Cmd/Effects/FullReverbCmdName=效果.完整混响"
"$$$/Cmd/Effects/GainEnvelopeProcessCmdDesc=使用分贝比例处理增益包络。"
"$$$/Cmd/Effects/GainEnvelopeProcessCmdName=效果.增益包络（破坏性处理）"
"$$$/Cmd/Effects/GraphicEQ10BandsCmdDesc=应用图形EQ到波形。"
"$$$/Cmd/Effects/GraphicEQ10BandsCmdName=效果.图形均衡器（10段）"
"$$$/Cmd/Effects/GraphicEQ20BandsCmdDesc=应用图形EQ到波形。"
"$$$/Cmd/Effects/GraphicEQ20BandsCmdName=效果.图形均衡器（20段）"
"$$$/Cmd/Effects/GraphicEQ30BandsCmdDesc=应用图形EQ到波形。"
"$$$/Cmd/Effects/GraphicEQ30BandsCmdName=效果.图形均衡器（30段）"
"$$$/Cmd/Effects/GraphicPhaseShifterCmdDesc=添加图形移相器效果。"
"$$$/Cmd/Effects/GraphicPhaseShifterCmdName=效果.图形移相器"
"$$$/Cmd/Effects/GuitarSuiteCmdDesc=添加吉他套件效果到波形。"
"$$$/Cmd/Effects/GuitarSuiteCmdName=效果.吉他套件"
"$$$/Cmd/Effects/HardLimitCmdDesc=强制限幅波形。"
"$$$/Cmd/Effects/HardLimitCmdName=效果.强制限幅"
"$$$/Cmd/Effects/HissReductionProcessCmdDesc=处理嘶声消减。"
"$$$/Cmd/Effects/HissReductionProcessCmdName=效果.削减嘶声（破坏性处理）"
"$$$/Cmd/Effects/IntraClipCmdDesc=校正波形电平（最适合语音）。"
"$$$/Cmd/Effects/IntraClipCmdName=效果.语音音量放大"
"$$$/Cmd/Effects/InvertCmdDesc=反转当前选区内的音频。"
"$$$/Cmd/Effects/InvertCmdName=效果.反转"
"$$$/Cmd/Effects/MarkAudioAnalysisCmdName=效果.标记音频（破坏性处理）"
"$$$/Cmd/Effects/MarkAudioAnalysisCmdNameDesc=分析与标记非静音波形。"
"$$$/Cmd/Effects/MasteringCmdDesc=添加母带效果到波形。"
"$$$/Cmd/Effects/MasteringCmdName=效果.母带处理"
"$$$/Cmd/Effects/MultiBandCompressorCmdDesc=添加多段压限效果到波形。"
"$$$/Cmd/Effects/MultiBandCompressorCmdName=效果.多段压限器"
"$$$/Cmd/Effects/NoiseReductionProcessCmdDesc=处理降噪。"
"$$$/Cmd/Effects/NoiseReductionProcessCmdName=效果.降噪（破坏性处理）"
"$$$/Cmd/Effects/NoiseRemovalProcessCmdDesc=处理动态噪声。"
"$$$/Cmd/Effects/NoiseRemovalProcessCmdName=效果.动态噪声移除（破坏性处理）"
"$$$/Cmd/Effects/NormalizeCmdDesc=标准化波形。"
"$$$/Cmd/Effects/NormalizeCmdName=效果.标准化（破坏性处理）"
"$$$/Cmd/Effects/NotchFilterCmdDesc=应用陷波过滤器到波形。"
"$$$/Cmd/Effects/NotchFilterCmdName=效果.陷波过滤器"
"$$$/Cmd/Effects/OpenMatchVolumePanelCmdDesc=打开匹配音量面板。"
"$$$/Cmd/Effects/OpenMatchVolumePanelCmdName=效果.匹配音量"
"$$$/Cmd/Effects/ParametricEQCmdDesc=应用参数 EQ 效果到波形。"
"$$$/Cmd/Effects/ParametricEQCmdName=效果.参数 EQ"
"$$$/Cmd/Effects/PhaserCmdDesc=添加相位到波形。"
"$$$/Cmd/Effects/PhaserCmdName=效果.相位"
"$$$/Cmd/Effects/PitchCorrectCmdDesc=自动修正音高。"
"$$$/Cmd/Effects/PitchCorrectCmdName=效果.自动音高修正"
"$$$/Cmd/Effects/PitchCorrectManualCmdDesc=使用包络基于时间手动修正音高。"
"$$$/Cmd/Effects/PitchCorrectManualCmdName=效果.手动音高修正"
"$$$/Cmd/Effects/PluginManagerCmdDesc=打开音频插件管理器对话框。"
"$$$/Cmd/Effects/PluginManagerCmdName=效果.音频插件管理器"
"$$$/Cmd/Effects/PowerEffectsRackCmdDesc=切换整个效果架的开关状态。"
"$$$/Cmd/Effects/PowerEffectsRackCmdName=效果.开关效果架"
"$$$/Cmd/Effects/PowerSelectedEffectsCmdDesc=切换效果架内选中效果电源状态。"
"$$$/Cmd/Effects/PowerSelectedEffectsCmdName=效果.选中效果开关"
"$$$/Cmd/Effects/RenderEffectsRackCmdDesc=渲染效果架的所有效果到当前音频文件。"
"$$$/Cmd/Effects/RenderEffectsRackCmdName=效果.渲染效果架"
"$$$/Cmd/Effects/RepairCmdDesc=将不需要的选中音频替换为其周边素材。"
"$$$/Cmd/Effects/RepairCmdName=效果.自动修复选区"
"$$$/Cmd/Effects/ReverbCmdDesc=添加混响效果到波形。"
"$$$/Cmd/Effects/ReverbCmdName=效果.混响"
"$$$/Cmd/Effects/ReverseCmdDesc=前后反向当前选择的音频。"
"$$$/Cmd/Effects/ReverseCmdName=效果.前后反向"
"$$$/Cmd/Effects/SilenceCmdDesc=使当前选区内的音频静音。"
"$$$/Cmd/Effects/SilenceCmdName=效果.静音"
"$$$/Cmd/Effects/SingleBandCompressorCmdDesc=添加单段压限器效果到波形。"
"$$$/Cmd/Effects/SingleBandCompressorCmdName=效果.单段压限器"
"$$$/Cmd/Effects/StretchCmdDesc=伸缩波形。"
"$$$/Cmd/Effects/StretchCmdName=效果.伸缩与变调"
"$$$/Cmd/Effects/StudioReverbCmdDesc=添加混响效果到波形。"
"$$$/Cmd/Effects/StudioReverbCmdName=效果.室内混响"
"$$$/Cmd/Effects/SurroundReverbCmdDesc=添加环绕混响到波形。"
"$$$/Cmd/Effects/SurroundReverbCmdName=效果.环绕混响"
"$$$/Cmd/Effects/TubeModeledCompressorCmdDesc=添加电子管压限器效果到波形。"
"$$$/Cmd/Effects/TubeModeledCompressorCmdName=效果.电子管压限器"
"$$$/Cmd/Effects/VocalEnhancerCmdDesc=添加人声增强效果到波形。"
"$$$/Cmd/Effects/VocalEnhancerCmdName=效果.人声增强"
"$$$/Cmd/Favorites/DeleteFavoriteCmdDesc=允许用户删除收藏夹。"
"$$$/Cmd/Favorites/DeleteFavoriteCmdName=收藏夹.删除收藏夹"
"$$$/Cmd/Favorites/StartRecordingFavoriteCmdDesc=开始记录编辑器操作到收藏夹。"
"$$$/Cmd/Favorites/StartRecordingFavoriteCmdName=收藏夹.开始记录收藏"
"$$$/Cmd/Favorites/StopRecordingFavoriteCmdDesc=停止记录编辑器操作并创建一个新的收藏。"
"$$$/Cmd/Favorites/StopRecordingFavoriteCmdName=收藏夹.停止记录收藏"
"$$$/Cmd/File/ClearRecentCmdDesc=清除最近文件列表。"
"$$$/Cmd/File/ClearRecentCmdName=文件.清除最近文件"
"$$$/Cmd/File/CloseAllCmdDesc=关闭所有文件。"
"$$$/Cmd/File/CloseAllCmdName=文件.全部关闭"
"$$$/Cmd/File/CloseCmdDesc=关闭当前文件。"
"$$$/Cmd/File/CloseCmdName=文件.关闭"
"$$$/Cmd/File/CloseSessionAndItsMediaCmdDesc=关闭当前项目及其引用媒体。"
"$$$/Cmd/File/CloseSessionAndItsMediaCmdName=文件.关闭项目及其媒体"
"$$$/Cmd/File/CloseUnusedMediaCmdDesc=关闭没有被任何打开的项目引用的文件"
"$$$/Cmd/File/CloseUnusedMediaCmdName=文件.关闭未使用媒体"
"$$$/Cmd/File/ExportAllMarkerRangesCmdDesc=导出所有范围标记的音频为分离文件。"
"$$$/Cmd/File/ExportAllMarkerRangesCmdName=文件.导出范围标记内的音频"
"$$$/Cmd/File/ExportApplicationSettingsCmdDesc=导出应用程序设置为文件。"
"$$$/Cmd/File/ExportApplicationSettingsCmdName=文件.导出应用程序设置"
"$$$/Cmd/File/ExportBurnAudioCmdDesc=Burn the audio file to a blank compact disc."
"$$$/Cmd/File/ExportBurnAudioCmdName=File.Burn Audio to CD"
"$$$/Cmd/File/ExportFCXMLCmdDesc=导出当前项目为 FCP XML 交换格式。"
"$$$/Cmd/File/ExportFCXMLCmdName=文件.导出 FCP XML 交换格式"
"$$$/Cmd/File/ExportMixdownAllCmdDesc=缩混整个主控声轨输出为新文件。Mixdown the entire output of master track to new file."
"$$$/Cmd/File/ExportMixdownAllCmdName=文件.多轨缩混导出整个项目"
"$$$/Cmd/File/ExportMixdownSelectedMarkerRangesCmdDesc=缩混主控声轨选中范围标记对应区域的一个或多个文件。"
"$$$/Cmd/File/ExportMixdownSelectedMarkerRangesCmdName=文件.多轨缩混导出选中标记范围"
"$$$/Cmd/File/ExportMixdownSelectionCmdDesc=缩混时间选区内的主控声轨输出为新文件。"
"$$$/Cmd/File/ExportMixdownSelectionCmdName=文件.多轨缩混导出时间选区"
"$$$/Cmd/File/ExportOMFCmdDesc=导出当前项目为新的 OMF 文件。"
"$$$/Cmd/File/ExportOMFCmdName=文件.导出 OMF"
"$$$/Cmd/File/ExportPremiereSequenceCmdDesc=导出当前项目为可被 Adobe Premiere Pro 打开的 XML 文件。"
"$$$/Cmd/File/ExportPremiereSequenceCmdName=多轨合成.输出到 Adobe Premiere Pro"
"$$$/Cmd/File/ExportSessionAsTemplateCmdDesc=导出当前项目为以后创建项目的模板。"
"$$$/Cmd/File/ExportSessionAsTemplateCmdName=文件.导出项目为模板"
"$$$/Cmd/File/ExportSessionCmdDesc=导出当前项目为一个新文件。"
"$$$/Cmd/File/ExportSessionCmdName=文件.导出项目"
"$$$/Cmd/File/ExtractAudioFromCDCmdDesc=从音频 CD 的音轨提取音频。"
"$$$/Cmd/File/ExtractAudioFromCDCmdName=文件.从 CD 提取音频"
"$$$/Cmd/File/ImportApplicationSettingsCmdDesc=导入选取的应用程序设置文件。"
"$$$/Cmd/File/ImportApplicationSettingsCmdName=文件.导入应用程序设置"
"$$$/Cmd/File/ImportFileCmdDesc=导入选取的文件。"
"$$$/Cmd/File/ImportFileCmdName=文件.导入文件"
"$$$/Cmd/File/ImportRawDataCmdDesc=导入带有用户指定数据类型的文件。"
"$$$/Cmd/File/ImportRawDataCmdName=文件.导入 Raw 数据"
"$$$/Cmd/File/NewAudioFileCmdDesc=创建空白音频文件。"
"$$$/Cmd/File/NewAudioFileCmdName=文件.新建音频文件"
"$$$/Cmd/File/NewCDLayoutCmdDesc=新建空白CD布局"
"$$$/Cmd/File/NewCDLayoutCmdName=文件.新建CD布局"
"$$$/Cmd/File/NewSessionCmdDesc=新建空白项目"
"$$$/Cmd/File/NewSessionCmdName=文件.新建多轨项目"
"$$$/Cmd/File/OpenAppendToCurrentCmdDesc=打开已有文件并追加到当前文件末尾。"
"$$$/Cmd/File/OpenAppendToCurrentCmdName=文件.追加打开到当前"
"$$$/Cmd/File/OpenAppendToNewCmdDesc=打开已有文件并追加到新建文件末尾。"
"$$$/Cmd/File/OpenAppendToNewCmdName=文件.追加开打到新建"
"$$$/Cmd/File/OpenCmdDesc=打开已有文件。"
"$$$/Cmd/File/OpenCmdName=文件.打开"
"$$$/Cmd/File/QuitCmdDesc=退出程序。"
"$$$/Cmd/File/QuitCmdName=文件.退出"
"$$$/Cmd/File/RevealCmdDesc=显示选定文件。"
"$$$/Cmd/File/RevealCmdName=文件.显示"
"$$$/Cmd/File/RevealInMediaBrowserCmdDesc=在媒体浏览器面板显示选定文件。"
"$$$/Cmd/File/RevealInMediaBrowserCmdName=文件.在媒体浏览器显示"
"$$$/Cmd/File/SaveAllAudioAsCmdDesc=Save all audio files to a specific format."
"$$$/Cmd/File/SaveAllAudioAsCmdName=File.Save All Audio As Batch Process"
"$$$/Cmd/File/SaveAllCmdDesc=保存所有文件。"
"$$$/Cmd/File/SaveAllCmdName=文件.全部保存"
"$$$/Cmd/File/SaveAsCmdDesc=保存当前文件为一个新的文件。"
"$$$/Cmd/File/SaveAsCmdName=文件.另存为"
"$$$/Cmd/File/SaveCmdDesc=保存当前文件。"
"$$$/Cmd/File/SaveCmdName=文件.保存"
"$$$/Cmd/File/SaveCopyAsCmdDesc=导出当前文件为新文件。"
"$$$/Cmd/File/SaveCopyAsCmdName=文件.导出文件"
"$$$/Cmd/File/SaveSelectionAsCmdDesc=保存当前选区为新文件。"
"$$$/Cmd/File/SaveSelectionAsCmdName=文件.保存选区为"
"$$$/Cmd/Help/AboutCmdDesc=打开关于对话框。"
"$$$/Cmd/Help/AboutCmdName=帮助.关于 Audition"
"$$$/Cmd/Help/AdobeAuditionHelpCmdDesc=打开 Audition 帮助。"
"$$$/Cmd/Help/AdobeAuditionHelpCmdName=帮助.Adobe Audition 帮助"
"$$$/Cmd/Help/AdobeFacebookCmdDesc=访问 Audition 的 Facebook 主页"
"$$$/Cmd/Help/AdobeFacebookCmdName=帮助.在 Facebool 关注 Audition"
"$$$/Cmd/Help/AdobePIPCmdDesc=打开产品改进计划对话框。"
"$$$/Cmd/Help/AdobePIPCmdName=帮助.产品改进计划"
"$$$/Cmd/Help/AdobeTwitterCmdDesc=在 Twitter 关注 Auditiom。"
"$$$/Cmd/Help/AdobeTwitterCmdName=帮助.Twitter求粉"
"$$$/Cmd/Help/DownloadCmdDesc=下载效果和其他内容。"
"$$$/Cmd/Help/DownloadCmdName=帮助.下载效果"
"$$$/Cmd/Help/SupportCenterCmdDesc=访问 Audition 支持中心。"
"$$$/Cmd/Help/SupportCenterCmdName=帮助.支持中心"
"$$$/Cmd/Help/UserForumCmdDesc=访问 Audition 用户论坛。"
"$$$/Cmd/Help/UserForumCmdName=帮助.用户论坛
"$$$/Cmd/Info/ToggleStatusBarCmdDesc=打开或关闭状态栏。"
"$$$/Cmd/Info/ToggleStatusBarCmdName=视图.显示状态栏"
"$$$/Cmd/Markers/ViewDisplayForMarkersPanelCmdDesc=打开标记显示对话框以定制标记面板。"
"$$$/Cmd/Markers/ViewDisplayForMarkersPanelCmdName=视图.显示标记面板"
"$$$/Cmd/Metadata/ViewDisplayForFilesPanelCmdDesc=打开元数据显示对话框以定制文件面板。"
"$$$/Cmd/Metadata/ViewDisplayForFilesPanelCmdName=视图.显示文件面板。"
"$$$/Cmd/Metadata/ViewDisplayForMetadataPanelCmdDesc=打开元数据显示对话框以定制元数据面板。"
"$$$/Cmd/Metadata/ViewDisplayForMetadataPanelCmdName=视图.显示元数据面板"
"$$$/Cmd/Metering/120dbRange=仪表.120 dB 范围"
"$$$/Cmd/Metering/120dbRangeDesc=设置电平表范围到 120dB."
"$$$/Cmd/Metering/24dbRange=仪表.24 dB 范围"
"$$$/Cmd/Metering/24dbRangeDesc=设置电平表范围到 24dB."
"$$$/Cmd/Metering/48dbRange=仪表.48 dB 范围"
"$$$/Cmd/Metering/48dbRangeDesc=设置电平表范围到 48dB."
"$$$/Cmd/Metering/60dbRange=仪表.60 dB 范围"
"$$$/Cmd/Metering/60dbRangeDesc=设置电平表范围到 60dB."
"$$$/Cmd/Metering/72dbRange=仪表.72 dB 范围"
"$$$/Cmd/Metering/72dbRangeDesc=设置电平表范围到 72dB."
"$$$/Cmd/Metering/96dbRange=仪表.96 dB 范围"
"$$$/Cmd/Metering/96dbRangeDesc=设置电平表范围到 96dB."
"$$$/Cmd/Metering/DynamicPeaks=仪表.动态峰值"
"$$$/Cmd/Metering/DynamicPeaksDesc=显示动态峰值。"
"$$$/Cmd/Metering/EnableInputMeter=仪表.输入信号表"
"$$$/Cmd/Metering/EnableInputMeterDesc=启用输入表。"
"$$$/Cmd/Metering/ResetIndicators=仪表.重设指示器"
"$$$/Cmd/Metering/ResetIndicatorsDesc=重设素材指示器。"
"$$$/Cmd/Metering/ShowLEDMeters=仪表.显示 LED 表"
"$$$/Cmd/Metering/ShowMeterBarsGradient=仪表.显示颜色渐变"
"$$$/Cmd/Metering/ShowValleys=仪表.显示峰谷"
"$$$/Cmd/Metering/StaticPeaks=仪表.静态峰值"
"$$$/Cmd/Metering/StaticPeaksDesc=显示静态峰值。"
"$$$/Cmd/Multitrack/Add51AudioTrackCmdDesc=添加新的 5.1 声轨。"
"$$$/Cmd/Multitrack/Add51AudioTrackCmdName=多轨合成.添加 5.1 声轨"
"$$$/Cmd/Multitrack/Add51BusTrackCmdDesc=添加新的 5.1 总线声轨。"
"$$$/Cmd/Multitrack/Add51BusTrackCmdName=多轨合成.添加 5.1 总线声轨"
"$$$/Cmd/Multitrack/AddMonoAudioTrackCmdDesc=添加新的单声道轨。"
"$$$/Cmd/Multitrack/AddMonoAudioTrackCmdName=多轨合成.添加单声道轨"
"$$$/Cmd/Multitrack/AddMonoBusTrackCmdDesc=添加新的单声道总线声轨。"
"$$$/Cmd/Multitrack/AddMonoBusTrackCmdName=多轨合成.添加单声道总线声轨"
"$$$/Cmd/Multitrack/AddStereoAudioTrackCmdDesc=添加新的立体声轨。"
"$$$/Cmd/Multitrack/AddStereoAudioTrackCmdName=多轨合成.添加立体声轨"
"$$$/Cmd/Multitrack/AddStereoBusTrackCmdDesc=添加新的立体声总线声轨。"
"$$$/Cmd/Multitrack/AddStereoBusTrackCmdName=多轨合成.添加立体声总线声轨"
"$$$/Cmd/Multitrack/AddVideoTrackCmdDesc=添加新的视频轨。"
"$$$/Cmd/Multitrack/AddVideoTrackCmdName=多轨合成.添加视频轨"
"$$$/Cmd/Multitrack/BounceSelectedTrackToNewTrackCmdDesc=Bounce selected track to a new track."
"$$$/Cmd/Multitrack/BounceSelectedTrackToNewTrackCmdName=Multitrack.Bounce Selected Track to New Track"
"$$$/Cmd/Multitrack/BounceToNewTrackSelectedClipsInCmdDesc=内部缩混时间选区内选中素材为新建声轨。"
"$$$/Cmd/Multitrack/BounceToNewTrackSelectedClipsInCmdName=多轨合成.内部缩混时间选区内选中素材为新建声轨"
"$$$/Cmd/Multitrack/BounceToNewTrackSelectedClipsOnlyCmdDesc=内部缩混仅选中素材为新建声轨。"
"$$$/Cmd/Multitrack/BounceToNewTrackSelectedClipsOnlyCmdName=多轨合成.内部缩混仅选中素材为新建声轨"
"$$$/Cmd/Multitrack/BounceToNewTrackTimeSelectionCmdDesc=内部缩混一个时间选区为新建声轨。"
"$$$/Cmd/Multitrack/BounceToNewTrackTimeSelectionCmdName=多轨合成.内部缩混时间选区为新建声轨"
"$$$/Cmd/Multitrack/DeleteTrackCmdDesc=删除当前选中轨道。"
"$$$/Cmd/Multitrack/DeleteTrackCmdName=多轨合成.删除轨道"
"$$$/Cmd/Multitrack/DuplicateTrackCmdDesc=复制声轨。"
"$$$/Cmd/Multitrack/DuplicateTrackCmdName=多轨合成.复制声轨"
"$$$/Cmd/Multitrack/EnableClipKeyframeEditingCmdDesc=显示素材关键帧节点并允许编辑。"
"$$$/Cmd/Multitrack/EnableClipKeyframeEditingCmdName=多轨合成.启用素材关键帧编辑"
"$$$/Cmd/Multitrack/ImportAndInsertFilesAsClipsCmdDesc=导入指定文件并作为素材插入到活动项目。"
"$$$/Cmd/Multitrack/ImportAndInsertFilesAsClipsCmdName=多轨合成.导入并作为素材插入文件"
"$$$/Cmd/Multitrack/MixdownAllToNewFileCmdDesc=缩混整个主控声轨输出为新的未保存文件。Mixdown the entire output of master track to new unsaved file."
"$$$/Cmd/Multitrack/MixdownAllToNewFileCmdName=多轨合成.缩混全部为新文件"
"$$$/Cmd/Multitrack/MixdownSelectionToNewFileCmdDesc=缩混时间选区内的主控声轨输出为新的未保存文件。"
"$$$/Cmd/Multitrack/MixdownSelectionToNewFileCmdName=多轨合成.缩混时间选区为新文件"
"$$$/Cmd/Multitrack/MoveTrackDownCmdDesc=向下移动当前选中轨道。"
"$$$/Cmd/Multitrack/MoveTrackDownCmdName=多轨合成.向下移动轨道"
"$$$/Cmd/Multitrack/MoveTrackUpCmdDesc=向上移动当前选中轨道。"
"$$$/Cmd/Multitrack/MoveTrackUpCmdName=多轨合成.向上移动轨道"
"$$$/Cmd/Multitrack/PlayHiddenClipsCmdDesc=播放隐藏素材。"
"$$$/Cmd/Multitrack/PlayHiddenClipsCmdName=多轨合成.播放素材重叠部分"
"$$$/Cmd/Multitrack/SelectNextTrackCmdDesc=移动选区到下一轨。"
"$$$/Cmd/Multitrack/SelectNextTrackCmdName=多轨合成.选择下一轨"
"$$$/Cmd/Multitrack/SelectPreviousTrackCmdDesc=移动选区到前一轨。"
"$$$/Cmd/Multitrack/SelectPreviousTrackCmdName=多轨合成.选择前一轨"
"$$$/Cmd/Panels/ClearEffectsRackCmdDesc=清除效果架面板的内容。"
"$$$/Cmd/Panels/ClearEffectsRackCmdName=效果.清除效果架"
"$$$/Cmd/Panels/EditClipEffectsCmdDesc=启用效果架面板以编辑素材效果。"
"$$$/Cmd/Panels/EditClipEffectsCmdName=效果.编辑素材效果"
"$$$/Cmd/Panels/EditTrackEffectsCmdDesc=启用效果架面板以编辑声轨效果。"
"$$$/Cmd/Panels/EditTrackEffectsCmdName=效果.编辑声轨效果"
"$$$/Cmd/Panels/ToggleAmpStatsPanelCmdDesc=打开或关闭振幅统计面板。"
"$$$/Cmd/Panels/ToggleAmpStatsPanelCmdName=窗口.振幅统计"
"$$$/Cmd/Panels/ToggleAnalysisEffectPanelCmdDesc=打开或关闭修复面板。"
"$$$/Cmd/Panels/ToggleAnalysisEffectPanelCmdName=窗口.修复"
"$$$/Cmd/Panels/ToggleBatchProcessPanelCmdDesc=打开或关闭批处理面板。"
"$$$/Cmd/Panels/ToggleBatchProcessPanelCmdName=窗口.批处理"
"$$$/Cmd/Panels/ToggleEditorPanelCmdDesc=打开或关闭编辑器面板。"
"$$$/Cmd/Panels/ToggleEditorPanelCmdName=窗口.编辑"
"$$$/Cmd/Panels/ToggleEffectsRackPanelCmdDesc=打开或关闭效果架面板。"
"$$$/Cmd/Panels/ToggleEffectsRackPanelCmdName=窗口.效果架"
"$$$/Cmd/Panels/ToggleFilesPanelCmdDesc=打开或关闭文件面板。"
"$$$/Cmd/Panels/ToggleFilesPanelCmdName=窗口.文件"
"$$$/Cmd/Panels/ToggleFreqAnalPanelCmdDesc=打开或关闭频率分析面板。"
"$$$/Cmd/Panels/ToggleFreqAnalPanelCmdName=窗口.频率分析"
"$$$/Cmd/Panels/ToggleHistoryPanelCmdDesc=打开或关闭历史记录面板。"
"$$$/Cmd/Panels/ToggleHistoryPanelCmdName=窗口.历史"
"$$$/Cmd/Panels/ToggleLevelsPanelCmdDesc=打开或关闭电平表面板。"
"$$$/Cmd/Panels/ToggleLevelsPanelCmdName=窗口.电平表"
"$$$/Cmd/Panels/ToggleMarkersPanelCmdDesc=打开或关闭标记面板。"
"$$$/Cmd/Panels/ToggleMarkersPanelCmdName=窗口.标记"
"$$$/Cmd/Panels/ToggleMatchVolumePanelCmdDesc=打开或关闭匹配音量面板。"
"$$$/Cmd/Panels/ToggleMatchVolumePanelCmdName=窗口.匹配音量"
"$$$/Cmd/Panels/ToggleMediaBrowserPanelCmdDesc=打开或关闭媒体浏览器面板。"
"$$$/Cmd/Panels/ToggleMediaBrowserPanelCmdName=窗口.媒体浏览器"
"$$$/Cmd/Panels/ToggleMetadataPanelCmdDesc=打开或关闭元数据面板。"
"$$$/Cmd/Panels/ToggleMetadataPanelCmdName=窗口.元数据"
"$$$/Cmd/Panels/ToggleMixerCmdDesc=打开或关闭调音台面板。"
"$$$/Cmd/Panels/ToggleMixerPanelCmdName=窗口.调音台"
"$$$/Cmd/Panels/TogglePhaseMeterPanelCmdDesc=打开或关闭相位表面板。"
"$$$/Cmd/Panels/TogglePhaseMeterPanelCmdName=窗口.相位表"
"$$$/Cmd/Panels/TogglePlaylistPanelCmdDesc=打开或关闭播放列表面板。"
"$$$/Cmd/Panels/TogglePlaylistPanelCmdName=窗口.播放列表"
"$$$/Cmd/Panels/TogglePropertiesPanelCmdDesc=打开或关闭属性面板。"
"$$$/Cmd/Panels/TogglePropertiesPanelCmdName=窗口.属性"
"$$$/Cmd/Panels/ToggleSelectionViewCmdDesc=打开或关闭选区/视图面板。"
"$$$/Cmd/Panels/ToggleSelectionViewPanelCmdName=窗口.选区/视图"
"$$$/Cmd/Panels/ToggleSurroundPannerPanelCmdDesc=打开或关闭声轨声相面板。"
"$$$/Cmd/Panels/ToggleSurroundPannerPanelCmdName=窗口.声轨声相"
"$$$/Cmd/Panels/ToggleTimePanelCmdDesc=打开或关闭时间面板。"
"$$$/Cmd/Panels/ToggleTimePanelCmdName=窗口.时间"
"$$$/Cmd/Panels/ToggleToolsPanelCmdDesc=打开或关闭工具栏"
"$$$/Cmd/Panels/ToggleToolsPanelCmdName=窗口.工具"
"$$$/Cmd/Panels/ToggleVideoPanelCmdDesc=打开或关闭视频面板。"
"$$$/Cmd/Panels/ToggleVideoPanelCmdName=窗口.视频"
"$$$/Cmd/Preferences/AudioChannelMappingCmdName=首选项.音频声道映射"
"$$$/Cmd/Preferences/AudioHardwareCmdName=首选项.音频硬件"
"$$$/Cmd/Preferences/AudioHardwareDesc=打开首选项对话框内的音频硬件面板。"
"$$$/Cmd/Preferences/ControlSurfaceCmdDesc=打开首选项对话框内的控制界面面板。"
"$$$/Cmd/Preferences/ControlSurfaceCmdName=首选项.控制界面"
"$$$/Cmd/Preferences/DataCmdName=首选项.数据"
"$$$/Cmd/Preferences/DataDesc=打开首选项对话框内的数据面板。"
"$$$/Cmd/Preferences/EffectsCmdName=首选项.效果"
"$$$/Cmd/Preferences/EffectsDesc=打开首选项对话框内的效果面板。"
"$$$/Cmd/Preferences/GeneralCmdDesc=打开首选项对话框内的常规面板。"
"$$$/Cmd/Preferences/GeneralCmdName=首选项.常规"
"$$$/Cmd/Preferences/LastPrefsPaneCmdDesc=打开首选项对话框内的多个最近访问面板。"
"$$$/Cmd/Preferences/LastPrefsPaneCmdName=首选项.最近面板"
"$$$/Cmd/Preferences/MediaCmdName=首选项.媒体与磁盘缓存"
"$$$/Cmd/Preferences/MediaDesc=打开首选项对话框内的媒体与暂存盘面板。"
"$$$/Cmd/Preferences/MetadataCmdDesc=打开首选项对话框内的标记与元数据面板。"
"$$$/Cmd/Preferences/MetadataCmdName=首选项.标记与元数据"
"$$$/Cmd/Preferences/MultitrackCmdDesc=打开首选项对话框内的多轨合成面板。"
"$$$/Cmd/Preferences/MultitrackCmdName=首选项.多轨合成"
"$$$/Cmd/Preferences/PlayOnlySelectedFrequenciesCmdDesc=切换 \"在一个频谱选区存在时仅播放选中频率\" 首选项。"
"$$$/Cmd/Preferences/PlayOnlySelectedFrequenciesCmdName=首选项.\"在一个频谱选区存在时仅播放选中频率\"开关"
"$$$/Cmd/Preferences/PlaybackCmdDesc=打开首选项对话框内的回放面板。"
"$$$/Cmd/Preferences/PlaybackCmdName=首选项.回放"
"$$$/Cmd/Preferences/ShowLEDMetersDesc=显示 LED 样式表盘。"
"$$$/Cmd/Preferences/ShowMeterBarsGradientDesc=显示带色彩渐变的表盘。"
"$$$/Cmd/Preferences/ShowValleysDesc=显示峰谷。"
"$$$/Cmd/Preferences/SpectralCmdDesc=打开首选项对话框内的频谱显示面板。"
"$$$/Cmd/Preferences/SpectralCmdName=首选项.频谱显示"
"$$$/Cmd/Preferences/TimeDisplayCmdDesc=打开首选项对话框内的时间显示面板。"
"$$$/Cmd/Preferences/TimeDisplayCmdName=首选项.时间显示"
"$$$/Cmd/Preferences/TogglePlayStyleIsLegacyCmdDesc=切换 \"停止时指示器回到开始位置\" 首选项。"
"$$$/Cmd/Preferences/TogglePlayStyleIsLegacyCmdName=首选项.\"停止时指示器回到开始位置\"开关"
"$$$/Cmd/Preferences/ToggleSyncSelectionViewCTICmdDesc=切换 \"同步文档之间的指示器，选区，以及缩放范围\" 首选项。"
"$$$/Cmd/Preferences/ToggleSyncSelectionViewCTICmdName=首选项.\"同步文档之间的指示器，选区，以及缩放范围\""
"$$$/Cmd/Preferences/UserInterfaceCmdName=首选项.外观"
"$$$/Cmd/Tools/BrushOpacityDecCmdDesc=降低频谱显示笔刷透明度。"
"$$$/Cmd/Tools/BrushOpacityDecCmdName=工具.降低笔刷透明度"
"$$$/Cmd/Tools/BrushOpacityIncCmdDesc=增加频谱显示笔刷透明度。"
"$$$/Cmd/Tools/BrushOpacityIncCmdName=工具.增加笔刷透明度"
"$$$/Cmd/Tools/BrushSizeDecCmdDesc=减少频谱显示笔刷大小。"
"$$$/Cmd/Tools/BrushSizeDecCmdName=工具.减少笔刷大小"
"$$$/Cmd/Tools/BrushSizeIncCmdDesc=增加频谱显示笔刷大小。"
"$$$/Cmd/Tools/BrushSizeIncCmdName=工具.增加笔刷大小"
"$$$/Cmd/Tools/HealingBrushCmdDesc=选择污点修复刷工具。"
"$$$/Cmd/Tools/HealingBrushCmdName=工具.污点修复刷"
"$$$/Cmd/Tools/LassoSelectCmdDesc=选择套索选择工具。"
"$$$/Cmd/Tools/LassoSelectCmdName=工具.套索选择"
"$$$/Cmd/Tools/MarqueeSelectCmdDesc=选择框选工具。"
"$$$/Cmd/Tools/MarqueeSelectCmdName=工具.框选"
"$$$/Cmd/Tools/MoveCmdDesc=选择移动工具。"
"$$$/Cmd/Tools/MoveCmdName=工具.移动"
"$$$/Cmd/Tools/PaintbrushSelectCmdDesc=选择笔刷选取工具。"
"$$$/Cmd/Tools/PaintbrushSelectCmdName=工具.笔刷选择"
"$$$/Cmd/Tools/RazorAllCmdDesc=选择用于所有素材上的切割工具。"
"$$$/Cmd/Tools/RazorAllCmdName=工具.切割所有素材"
"$$$/Cmd/Tools/RazorCmdDesc=选中当前切割工具或重复切割工具。"
"$$$/Cmd/Tools/RazorCmdName=工具.切割"
"$$$/Cmd/Tools/RazorSelCmdDesc=选择用于选中素材的切割工具。Choose the Razor tool which acts on selected clips."
"$$$/Cmd/Tools/RazorSelCmdName=工具.切割选定素材"
"$$$/Cmd/Tools/SlipCmdDesc=选择滑动工具"
"$$$/Cmd/Tools/SlipCmdName=工具.滑动"
"$$$/Cmd/Tools/TimeSelectCmdDesc=选择时间选区工具。"
"$$$/Cmd/Tools/TimeSelectCmdName=工具.时间选区"
"$$$/Cmd/Transport/CollapseLeftCmdDesc=如果存在选区则移除，并移动指示器到其左侧。"
"$$$/Cmd/Transport/CollapseLeftCmdName=走带.选区左侧并移除选区"
"$$$/Cmd/Transport/CollapseRightCmdDesc=如果存在选区则移除，并移动指示器到其右边。"
"$$$/Cmd/Transport/CollapseRightCmdName=走带.选区右侧并移除选区"
"$$$/Cmd/Transport/EditMetronomePatternCmdDesc=编辑节拍器样式"
"$$$/Cmd/Transport/EditMetronomePatternCmdName=多轨合成.编辑节拍器样式"
"$$$/Cmd/Transport/KeyboardEndCmdDesc=End键功能。"
"$$$/Cmd/Transport/KeyboardEndCmdName=键盘.End"
"$$$/Cmd/Transport/KeyboardEnterCmdDesc=Enter键功能。"
"$$$/Cmd/Transport/KeyboardEnterCmdName=键盘.Enter"
"$$$/Cmd/Transport/KeyboardEscapeCmdDesc=ESC键功能"
"$$$/Cmd/Transport/KeyboardEscapeCmdName=键盘.Escape"
"$$$/Cmd/Transport/KeyboardHomeCmdDesc=Home键功能。"
"$$$/Cmd/Transport/KeyboardHomeCmdName=键盘.Home"
"$$$/Cmd/Transport/LoopToggleCmdDesc=切换循环播放状态。"
"$$$/Cmd/Transport/LoopToggleCmdName=走带.循环开关"
"$$$/Cmd/Transport/MetronomeToggleCmdDesc=多轨节拍器开关。"
"$$$/Cmd/Transport/MetronomeToggleCmdName=多轨合成.节拍器开关"
"$$$/Cmd/Transport/MoveCTILeftCmdDesc=移动指示器到左侧"
"$$$/Cmd/Transport/MoveCTILeftCmdName=走带.移动指示器到左侧"
"$$$/Cmd/Transport/MoveCTIRightCmdDesc=移动指示器到右侧。"
"$$$/Cmd/Transport/MoveCTIRightCmdName=走带.移动指示器到右侧"
"$$$/Cmd/Transport/MoveCTIToBeginningCmdDesc=如果存在选区则移除，并移动指示器到开始。"
"$$$/Cmd/Transport/MoveCTIToBeginningCmdName=走带.移动指示器到开始"
"$$$/Cmd/Transport/MoveCTIToEndCmdDesc=如果存在选区则移除，并移动指示器到末尾。"
"$$$/Cmd/Transport/MoveCTIToEndCmdName=走带.移动指示器到末尾"
"$$$/Cmd/Transport/MoveCTIToInPointCmdDesc=移动指示器到选区入点。"
"$$$/Cmd/Transport/MoveCTIToInPointCmdName=走带.Move 移动指示器到入点"
"$$$/Cmd/Transport/MoveCTIToOutPointCmdDesc=移动指示器到选区出点。"
"$$$/Cmd/Transport/MoveCTIToOutPointCmdName=走带.移动指示器到出点"
"$$$/Cmd/Transport/PlayCmdDesc=从开始位置播放。"
"$$$/Cmd/Transport/PlayCmdName=走带.播放"
"$$$/Cmd/Transport/SetMetronomeSoundTypeAfrican1CmdDesc=设置节拍器声音类型为 African 1。"
"$$$/Cmd/Transport/SetMetronomeSoundTypeAfrican1CmdName=多轨合成.设置节拍器声音类型为 African 1"
"$$$/Cmd/Transport/SetMetronomeSoundTypeAfrican2CmdDesc=设置节拍器声音类型为 African 2。"
"$$$/Cmd/Transport/SetMetronomeSoundTypeAfrican2CmdName=多轨合成.设置节拍器声音类型为 African 2"
"$$$/Cmd/Transport/SetMetronomeSoundTypeBeepsCmdDesc=Set the metronome sound type to Beeps."
"$$$/Cmd/Transport/SetMetronomeSoundTypeBeepsCmdName=Multitrack.Set Metronome Sound Type to Beeps"
"$$$/Cmd/Transport/SetMetronomeSoundTypeCymbalsCmdDesc=Set the metronome sound type to Cymbals."
"$$$/Cmd/Transport/SetMetronomeSoundTypeCymbalsCmdName=Multitrack.Set Metronome Sound Type to Cymbals"
"$$$/Cmd/Transport/SetMetronomeSoundTypeKitCmdDesc=Set the metronome sound type to Kit."
"$$$/Cmd/Transport/SetMetronomeSoundTypeKitCmdName=Multitrack.Set Metronome Sound Type to Kit"
"$$$/Cmd/Transport/SetMetronomeSoundTypeLatin1CmdDesc=Set the metronome sound type to Latin 1."
"$$$/Cmd/Transport/SetMetronomeSoundTypeLatin1CmdName=Multitrack.Set Metronome Sound Type to Latin 1"
"$$$/Cmd/Transport/SetMetronomeSoundTypeLatin2CmdDesc=Set the metronome sound type to Latin 2."
"$$$/Cmd/Transport/SetMetronomeSoundTypeLatin2CmdName=Multitrack.Set Metronome Sound Type to Latin 2"
"$$$/Cmd/Transport/SetMetronomeSoundTypeLatin3CmdDesc=Set the metronome sound type to Latin 3."
"$$$/Cmd/Transport/SetMetronomeSoundTypeLatin3CmdName=Multitrack.Set Metronome Sound Type to Latin 3"
"$$$/Cmd/Transport/SetMetronomeSoundTypeSticksCmdDesc=Set the metronome sound type to Sticks."
"$$$/Cmd/Transport/SetMetronomeSoundTypeSticksCmdName=Multitrack.Set Metronome Sound Type to Sticks"
"$$$/Cmd/Transport/SetMetronomeSoundTypeTablaCmdDesc=Set the metronome sound type to Tabla."
"$$$/Cmd/Transport/SetMetronomeSoundTypeTablaCmdName=Multitrack.Set Metronome Sound Type to Tabla"
"$$$/Cmd/Transport/ShuttleLeftCmdDesc=向左穿梭。"
"$$$/Cmd/Transport/ShuttleLeftCmdName=走带.左穿梭"
"$$$/Cmd/Transport/ShuttleRightCmdDesc=向右穿梭。"
"$$$/Cmd/Transport/ShuttleRightCmdName=走带.右穿梭"
"$$$/Cmd/Transport/SkipSelectionToggleCmdDesc=切换跳过选区播放状态。"
"$$$/Cmd/Transport/SkipSelectionToggleCmdName=走带.跳过选区开关"
"$$$/Cmd/Transport/StopCmdDesc=停止播放。"
"$$$/Cmd/Transport/StopCmdName=走带.停止"
"$$$/Cmd/Transport/StopHereCmdDesc=停止穿梭。"
"$$$/Cmd/Transport/StopHereCmdName=走带.停止穿梭"
"$$$/Cmd/Transport/TogglePauseCmdDesc=暂停/继续播放和录制。"
"$$$/Cmd/Transport/TogglePauseCmdName=走带.暂停开关"
"$$$/Cmd/Transport/TogglePlaybackCmdDesc=开始/停止播放。"
"$$$/Cmd/Transport/TogglePlaybackCmdName=走带.播放开关"
"$$$/Cmd/Transport/ToggleRecordingCmdDesc=开始/停止录制。"
"$$$/Cmd/Transport/ToggleRecordingCmdName=走带.录制开关"
"$$$/Cmd/Transport/ToggleTransportPanelCmdDesc=打开或关闭走带面板。"
"$$$/Cmd/Transport/ToggleTransportPanelCmdName=窗口.走带"
"$$$/Cmd/View/AnalyzeStatisticsCmdDesc=在振幅统计面板内执行扫描。"
"$$$/Cmd/View/AnalyzeStatisticsCmdName=分析.振幅统计扫描"
"$$$/Cmd/View/CDEditorCmdDesc=Shows the CD Editor."
"$$$/Cmd/View/CDEditorCmdName=View.CD Editor"
"$$$/Cmd/View/ColoredChannelsCmdDesc=切换唯一颜色波形通道。"
"$$$/Cmd/View/ColoredChannelsCmdName=视图.唯一颜色波形通道开关"
"$$$/Cmd/View/LayeredChannelsCmdDesc=切换分层波形通道。"
"$$$/Cmd/View/LayeredChannelsCmdName=视图.分层波形通道开关"
"$$$/Cmd/View/MultitrackEditorCmdDesc=显示多轨编辑器。"
"$$$/Cmd/View/MultitrackEditorCmdName=视图.多轨编辑器"
"$$$/Cmd/View/ScanFrequencyAnalysisCmdDesc=在频率分析面板内执行扫描。"
"$$$/Cmd/View/ScanFrequencyAnalysisCmdName=分析.频率分析扫描"
"$$$/Cmd/View/ScrollToCTICmdDesc=滚动视图以使时间指示器可见。"
"$$$/Cmd/View/ScrollToCTICmdName=视图.滚动到时间指示器"
"$$$/Cmd/View/ScrollToSTICmdDesc=滚动视图以使回放开始时间可见。"
"$$$/Cmd/View/ScrollToSTICmdName=视图.滚动到开始时间"
"$$$/Cmd/View/ScrollToSelectionCmdDesc=滚动视图以使选区可见。"
"$$$/Cmd/View/ScrollToSelectionCmdName=视图.滚动到选区"
"$$$/Cmd/View/SetNavBarChannelDisplayFromEditorCmdDesc=设置导航栏显示通道与波形编辑器一样。"
"$$$/Cmd/View/SetNavBarChannelDisplayFromEditorCmdName=视图.设置导航栏通道显示与编辑器一致"
"$$$/Cmd/View/SetNavBarChannelsLayeredCmdDesc=设置导航栏显示为层叠通道。"
"$$$/Cmd/View/SetNavBarChannelsLayeredCmdName=视图.设置导航栏通道层叠"
"$$$/Cmd/View/SetNavBarChannelsSeparatedCmdDesc=设置导航栏显示为分离通道。"
"$$$/Cmd/View/SetNavBarChannelsSeparatedCmdName=视图.设置导航栏通道分离"
"$$$/Cmd/View/SpectralFreqFullLinCmdDesc=调节频谱频率比例为完全线性。"
"$$$/Cmd/View/SpectralFreqFullLinCmdName=视图.频谱频率完全线性"
"$$$/Cmd/View/SpectralFreqFullLogCmdDesc=调节频谱频率比例为完全对数。"
"$$$/Cmd/View/SpectralFreqFullLogCmdName=视图.频谱频率完全对数"
"$$$/Cmd/View/SpectralFreqMoreLinCmdDesc=调节频谱频率比例为更多线性和更少对数。"
"$$$/Cmd/View/SpectralFreqMoreLinCmdName=视图.频谱频率更多线性"
"$$$/Cmd/View/SpectralFreqMoreLogCmdDesc=调节频谱频率比例为更多对数和更少线性。"
"$$$/Cmd/View/SpectralFreqMoreLogCmdName=视图.频谱频率更多对数"
"$$$/Cmd/View/SpectralResolutionDecCmdDesc=降低频谱显示分辨率。"
"$$$/Cmd/View/SpectralResolutionDecCmdName=视图.降低频谱分辨率"
"$$$/Cmd/View/SpectralResolutionIncCmdDesc=增加频谱显示分辨率。"
"$$$/Cmd/View/SpectralResolutionIncCmdName=视图.增加频谱分辨率"
"$$$/Cmd/View/ToggleClipEffectEnvelopesCmdDesc=切换素材效果包络的显示状态。"
"$$$/Cmd/View/ToggleClipEffectEnvelopesCmdName=视图.素材效果包络开关"
"$$$/Cmd/View/ToggleClipPanEnvelopesCmdDesc=切换素材声相包络的显示状态。"
"$$$/Cmd/View/ToggleClipPanEnvelopesCmdName=视图.素材声相包络开关"
"$$$/Cmd/View/ToggleClipVolumeEnvelopesCmdDesc=切换素材音量包络的显示状态。"
"$$$/Cmd/View/ToggleClipVolumeEnvelopesCmdName=视图.素材音量包络开关"
"$$$/Cmd/View/ToggleEditorControlsCmdDesc=切换编辑器面板控制的显示状态。"
"$$$/Cmd/View/ToggleEditorControlsCmdName=视图.切换编辑器面板控制"
"$$$/Cmd/View/ToggleEditorsCmdDesc=在波形编辑器与多轨编辑器之间切换"
"$$$/Cmd/View/ToggleEditorsCmdName=视图.编辑器开关"
"$$$/Cmd/View/ToggleHUDCmdDesc=切换编辑器 HUD 显示状态。" 
"$$$/Cmd/View/ToggleHUDCmdName=视图.HUD 开关"
"$$$/Cmd/View/TogglePitchCmdDesc=切换频谱音高显示。"
"$$$/Cmd/View/TogglePitchCmdName=视图.频谱音高显示开关"
"$$$/Cmd/View/ToggleShowSpectralCmdDesc=切换频谱频率显示。"
"$$$/Cmd/View/ToggleShowSpectralCmdName=视图.频谱频率显示开关"
"$$$/Cmd/View/VideoDisplayFullResolution=视图.完整分辨率视频"
"$$$/Cmd/View/VideoDisplayFullResolutionDesc=Decode video at full resolution for display in the Video Panel."
"$$$/Cmd/View/VideoDisplayFullResolutionOnStop=视图.播放停止时切换完整分辨率视频"
"$$$/Cmd/View/VideoDisplayFullResolutionOnStopDesc=Switch video display to full resolution when playback stops."
"$$$/Cmd/View/VideoDisplayQuarterResolution=视图.1/4分辨率视频"
"$$$/Cmd/View/VideoDisplayQuarterResolutionDesc=Decode video at one quarter resolution for display in the Video Panel."
"$$$/Cmd/View/VideoDisplaySetScale100=视图.100%比例视频"
"$$$/Cmd/View/VideoDisplaySetScale100Desc=Set scaling of video in the Video Panel to 100 percent."
"$$$/Cmd/View/VideoDisplaySetScale200=视图.200%比例视频"
"$$$/Cmd/View/VideoDisplaySetScale200Desc=Set scaling of video in the Video Panel to 200 percent."
"$$$/Cmd/View/VideoDisplaySetScale25=视频.25%比例视频"
"$$$/Cmd/View/VideoDisplaySetScale25Desc=Set scaling of video in the Video Panel to 25 percent."
"$$$/Cmd/View/VideoDisplaySetScale50=视图.50%比例视频"
"$$$/Cmd/View/VideoDisplaySetScale50Desc=Set scaling of video in the Video Panel to 50 percent."
"$$$/Cmd/View/VideoDisplaySetScaleBestFit=视图.视频适合视频面板比例"
"$$$/Cmd/View/VideoDisplaySetScaleBestFitDesc=Set scaling of video to fit the size of the Video Panel."
"$$$/Cmd/View/VideoDisplaySixteenthResolution=视图.1/16分辨率视频"
"$$$/Cmd/View/VideoDisplaySixteenthResolutionDesc=Decode video at one sixteenth resolution for display in the Video Panel."
"$$$/Cmd/View/View.NextTimeDisplayFormatCmdDesc=Cycle through the available time display formats (forward)."
"$$$/Cmd/View/View.NextTimeDisplayFormatCmdName=View.Select the next time display format"
"$$$/Cmd/View/View.SyncWithTimePrefsCmdDesc=Toggle whether or not the active file should synchronize with time and tempo preferences."
"$$$/Cmd/View/View.SyncWithTimePrefsCmdName=View.Synchronize with Time Display Preferences"
"$$$/Cmd/View/View.View.PreviousTimeDisplayFormatCmdDesc=Cycle through the available time display formats (backwards)."
"$$$/Cmd/View/View.View.PreviousTimeDisplayFormatCmdName=View.Select the previous time display format"
"$$$/Cmd/View/WaveformEditorCmdDesc=显示波形编辑器。"
"$$$/Cmd/View/WaveformEditorCmdName=视图.波形编辑器"
"$$$/Cmd/View/ZoomInAmpCmdDesc=放大振幅比例。"
"$$$/Cmd/View/ZoomInAmpCmdName=视图.放大（振幅）"
"$$$/Cmd/View/ZoomInAtInPointCmdDesc=放大时间选区的入点。"
"$$$/Cmd/View/ZoomInAtInPointCmdName=视图.放大入点"
"$$$/Cmd/View/ZoomInAtOutPointCmdDesc=放大时间选区的出点。"
"$$$/Cmd/View/ZoomInAtOutPointCmdName=视图.放大入点"
"$$$/Cmd/View/ZoomInFreqCmdDesc=放大频率比例。"
"$$$/Cmd/View/ZoomInFreqCmdName=视图.放大（频率）"
"$$$/Cmd/View/ZoomInTimeCmdDesc=放大时间比例。"
"$$$/Cmd/View/ZoomInTimeCmdName=视图.放大（时间）"
"$$$/Cmd/View/ZoomOutAmpCmdDesc=缩小振幅比例。"
"$$$/Cmd/View/ZoomOutAmpCmdName=视图.缩小（振幅）"
"$$$/Cmd/View/ZoomOutFreqCmdDesc=缩小频率比例。"
"$$$/Cmd/View/ZoomOutFreqCmdName=视图.缩小（频率）"
"$$$/Cmd/View/ZoomOutTimeCmdDesc=缩小时间比例。"
"$$$/Cmd/View/ZoomOutTimeCmdName=视图.缩小（时间）"
"$$$/Cmd/View/ZoomResetAmpCmdDesc=在振幅比例上重置缩放。"
"$$$/Cmd/View/ZoomResetAmpCmdName=视图.缩放重置（振幅）"
"$$$/Cmd/View/ZoomResetCmdDesc=重置所有比例的缩放。"
"$$$/Cmd/View/ZoomResetCmdName=视图.全部缩小（所有坐标）"
"$$$/Cmd/View/ZoomResetFreqCmdDesc=在频率比例上重置缩放。"
"$$$/Cmd/View/ZoomResetFreqCmdName=视图.缩放重置（频率）"
"$$$/Cmd/View/ZoomResetTimeCmdDesc=在时间比例上重置缩放。"
"$$$/Cmd/View/ZoomResetTimeCmdName=视图.缩放重置（时间）"
"$$$/Cmd/View/ZoomToSelectionCmdDesc=缩放时间选区。"
"$$$/Cmd/View/ZoomToSelectionCmdName=视图.缩放选区"
"$$$/Cmd/Window/DeleteWorkspaceCmdName=工作区.删除工作区"
"$$$/Cmd/Window/MinimizeCmdDesc=最小化窗口。"
"$$$/Cmd/Window/MinimizeCmdName=窗口.最小化"
"$$$/Cmd/Window/NewWorkspaceCmdName=工作区.新建工作区"
"$$$/Cmd/Window/ResetWorkspaceCmdName=工作区.重置工作区"
"$$$/Cmd/Window/ToggleMaximizeActiveFrameCmdDesc=在最大和正常尺寸之间切换活动窗口。"
"$$$/Cmd/Window/ToggleMaximizeActiveFrameCmdName=窗口.最大化活动窗口"
"$$$/Cmd/Workspace/DeleteWorkspaceCmdDesc=打开删除工作区对话框删除一个现有工作区。"
"$$$/Cmd/Workspace/NewWorkspaceCmdDesc=打开新建工作区对话框创建一个新的工作区。"
"$$$/Cmd/Workspace/ResetWorkspaceCmdDesc=打开重置工作区对话框重置活动工作区。"
"$$$/Cmd/Workspace/UserWorkspace1CmdDesc=在工作区菜单内切换到第一工作区。"
"$$$/Cmd/Workspace/UserWorkspace2CmdDesc=在工作区菜单内切换到第二工作区。"
"$$$/Cmd/Workspace/UserWorkspace3CmdDesc=在工作区菜单内切换到第三工作区。"
"$$$/Cmd/Workspace/UserWorkspace4CmdDesc=在工作区菜单内切换到第四工作区。"
"$$$/Cmd/Workspace/UserWorkspace5CmdDesc=在工作区菜单内切换到第五工作区。"
"$$$/Cmd/Workspace/UserWorkspace6CmdDesc=在工作区菜单内切换到第六工作区。"
"$$$/Cmd/Workspace/UserWorkspace7CmdDesc=在工作区菜单内切换到第七工作区。"
"$$$/Cmd/Workspace/UserWorkspace8CmdDesc=在工作区菜单内切换到第八工作区。"
"$$$/Cmd/Workspace/UserWorkspace9CmdDesc=在工作区菜单内切换到第九工作区。"
"$$$/Cmd/Workspace/Workspace1CmdName=工作区.工作区 1"
"$$$/Cmd/Workspace/Workspace2CmdName=工作区.工作区 2"
"$$$/Cmd/Workspace/Workspace3CmdName=工作区.工作区 3"
"$$$/Cmd/Workspace/Workspace4CmdName=工作区.工作区 4"
"$$$/Cmd/Workspace/Workspace5CmdName=工作区.工作区 5"
"$$$/Cmd/Workspace/Workspace6CmdName=工作区.工作区 6"
"$$$/Cmd/Workspace/Workspace7CmdName=工作区.工作区 7"
"$$$/Cmd/Workspace/Workspace8CmdName=工作区.工作区 8"
"$$$/Cmd/Workspace/Workspace9CmdName=工作区.工作区 9"
"$$$/Cmd/Zoom/ToggleZoomPanelCmdDesc=打开或关闭缩放面板。"
"$$$/Cmd/Zoom/ToggleZoomPanelCmdName=窗口.缩放"
"$$$/CommonPresetText/DeletePreset=删除预设"
"$$$/CommonPresetText/Presets=预设:"
"$$$/CommonPresetText/SaveEffectsRackAsAPreset=保存效果架为预设"
"$$$/CommonPresetText/SaveFavorite=保存当前效果设置为收藏"
"$$$/CommonPresetText/SaveRackFavorite=保存当前效果架为收藏"
"$$$/CommonPresetText/SaveSettingsAsAPreset=保存设置为预设"
"$$$/ConvertSampleTypeDialog/SameAsSource=与源相同"
"$$$/ConvertSampleTypeXML/51=5.1"
"$$$/ConvertSampleTypeXML/AdaptiveMode=自适应模式:"
"$$$/ConvertSampleTypeXML/BitDepth=位深度"
"$$$/ConvertSampleTypeXML/BitDepthColon=位深度:"
"$$$/ConvertSampleTypeXML/Channels=声道"
"$$$/ConvertSampleTypeXML/ChannelsColon=声道:"
"$$$/ConvertSampleTypeXML/Constant=恒定"
"$$$/ConvertSampleTypeXML/Crossover=交叉:"
"$$$/ConvertSampleTypeXML/Disabled=禁用"
"$$$/ConvertSampleTypeXML/DitherType=抖动类型:"
"$$$/ConvertSampleTypeXML/Dithering=抖动:"
"$$$/ConvertSampleTypeXML/Dynamic=动态（轻度）"
"$$$/ConvertSampleTypeXML/Dynamic2=动态（中度）"
"$$$/ConvertSampleTypeXML/Dynamic3=动态（极度）"
"$$$/ConvertSampleTypeXML/Enabled=启用"
"$$$/ConvertSampleTypeXML/Gaussian=高斯"
"$$$/ConvertSampleTypeXML/GaussianShaped=高斯（形状）"
"$$$/ConvertSampleTypeXML/HighPass=高通"
"$$$/ConvertSampleTypeXML/Hz=Hz"
"$$$/ConvertSampleTypeXML/LeftMix=左混合:"
"$$$/ConvertSampleTypeXML/LightSlope=轻度斜率"
"$$$/ConvertSampleTypeXML/Mono=单声道"
"$$$/ConvertSampleTypeXML/NeutralHeavy=中性（重）"
"$$$/ConvertSampleTypeXML/NeutralLight=中性（轻）"
"$$$/ConvertSampleTypeXML/NoiseShaping=噪声形状:"
"$$$/ConvertSampleTypeXML/None=无"
"$$$/ConvertSampleTypeXML/Off=关"
"$$$/ConvertSampleTypeXML/Percent=%"
"$$$/ConvertSampleTypeXML/PrePostFilter=前/后滤波"
"$$$/ConvertSampleTypeXML/Quality=品质:"
"$$$/ConvertSampleTypeXML/RightMix=右混合:"
"$$$/ConvertSampleTypeXML/SameAsSource=与源相同"
"$$$/ConvertSampleTypeXML/SampleRateColon=采样率:"
"$$$/ConvertSampleTypeXML/SampleRateConversion=采样率转换"
"$$$/ConvertSampleTypeXML/Stereo=立体声"
"$$$/ConvertSampleTypeXML/Strength=强度:"
"$$$/ConvertSampleTypeXML/Triangular=三角"
"$$$/ConvertSampleTypeXML/TriangularShaped=三角（形状）"
"$$$/ConvertSampleTypeXML/UShapedDeep=U 形（深）"
"$$$/ConvertSampleTypeXML/UShapedMedium=U 形（中）"
"$$$/ConvertSampleTypeXML/UShapedShallow=U 形（浅）"
"$$$/ConvertSampleTypeXML/WeightedHeavy=加力（重）"
"$$$/ConvertSampleTypeXML/WeightedLight=加力（轻）"
"$$$/ConvertSampleTypeXML/bits=位"
"$$$/ConvertSampleTypeXML/dB=dB"
"$$$/ConvertSampleTypeXML/kHz=kHz"
"$$$/CoreAudioHWPrefsXML/IOBlockSize=设置 I/O 缓存大小。低延迟使用更小的值，而更高的值在回放或录制期间会有误差"
"$$$/CoreAudioHWPrefsXML/InputDevice=设置默认输入设备"
"$$$/CoreAudioHWPrefsXML/MasterClock=设置主控时钟设备"
"$$$/CoreAudioHWPrefsXML/OutputDevice=设置默认输出设备"
"$$$/CoreAudioHWPrefsXML/SampleRate=设置输入与输出采样率"
"$$$/CoreAudioHWPrefsXML/Settings=打开外部硬件设置对话框"
"$$$/CurvePointEditDialog/Cancel=取消"
"$$$/CurvePointEditDialog/OK=确定"
"$$$/Delay/AllChannel=所有声道"
"$$$/Delay/Delay=延迟时间:"
"$$$/Delay/DelayUnits=延迟时间单位:"
"$$$/Delay/Invert=反相"
"$$$/Delay/InvertLeft=反相"
"$$$/Delay/LeftChannel=左声道"
"$$$/Delay/Mix=混合:"
"$$$/Delay/RightChannel=右声道"
"$$$/Delay/Slider/beats=节拍"
"$$$/Delay/Slider/ms=毫秒"
"$$$/Delay/Slider/samples=采样"
"$$$/DelayUI/Dry=干声"
"$$$/DelayUI/Wet=湿声"
"$$$/DopplerEditorView/CircleSeconds=Sound will go full circle every @0 seconds"
"$$$/DopplerEditorView/QualityExcellent=Excellent"
"$$$/DopplerEditorView/QualityGood=Good"
"$$$/DopplerEditorView/QualityLow=Low (fastest)"
"$$$/DopplerEditorView/QualityNearPerfect=Near Perfect"
"$$$/DopplerEditorView/QualityPerfect=Perfect (slowest)"
"$$$/DopplerEditorView/QualityVeryGood=Very Good"
"$$$/DopplerEditorView/TimesSecond=Sound will go full circle @0 times/second"
"$$$/DopplerShifterUI/AdjVol=Adjust Volume based on:"
"$$$/DopplerShifterUI/CenterInFrontBy=Center in Front by"
"$$$/DopplerShifterUI/CenterOnRightBy=Center on Right by"
"$$$/DopplerShifterUI/ComingFrom=Coming From"
"$$$/DopplerShifterUI/Direction=Direction"
"$$$/DopplerShifterUI/Distance=Distance"
"$$$/DopplerShifterUI/PassesInFrontBy=Passes in Front by"
"$$$/DopplerShifterUI/PassesOnRightBy=Passes on Right by"
"$$$/DopplerShifterUI/PathType=Path Type:"
"$$$/DopplerShifterUI/Quality=Quality:"
"$$$/DopplerShifterUI/Radius=Radius"
"$$$/DopplerShifterUI/StartingAngle=Starting Angle"
"$$$/DopplerShifterUI/StartingDistanceAway=Starting Distance Away"
"$$$/DopplerShifterUI/Velocity=Velocity"
"$$$/DopplerShifterUI/deg=°"
"$$$/DopplerShifterUI/deg0=0°"
"$$$/DopplerShifterUI/deg180=180°"
"$$$/DopplerShifterUI/deg270=270°"
"$$$/DopplerShifterUI/deg90=90°"
"$$$/DynamicsUI/AttackRelease=触发/释放:"
"$$$/DynamicsUI/AttackTime=触发时间:"
"$$$/DynamicsUI/BandLimiting=频段限制:"
"$$$/DynamicsUI/DynamicsTab=动态"
"$$$/DynamicsUI/FrequencyRange=频率范围"
"$$$/DynamicsUI/GainProcessor=增益处理"
"$$$/DynamicsUI/General=常规"
"$$$/DynamicsUI/HighCutoff=高频切除:"
"$$$/DynamicsUI/InputGain=输入增益:"
"$$$/DynamicsUI/InputSignalLevel=输入信号电平:"
"$$$/DynamicsUI/LevelDetector=电平检测"
"$$$/DynamicsUI/LinkChannels=链接声道"
"$$$/DynamicsUI/LookaheadTime=预测时间:"
"$$$/DynamicsUI/LowCutoff=低频切除:"
"$$$/DynamicsUI/MakeupGain=补充增益:"
"$$$/DynamicsUI/NoiseGatingIf=噪声门控制（如果扩展多于 50:1）"
"$$$/DynamicsUI/OutputGain=输出增益:"
"$$$/DynamicsUI/OutputSignalLevel=输出信号电平:"
"$$$/DynamicsUI/Peak=峰值"
"$$$/DynamicsUI/RMS=RMS"
"$$$/DynamicsUI/ReleaseTime=释放时间:"
"$$$/DynamicsUI/SettingsTab=设置"
"$$$/DynamicsUI/SplineCurves=曲线"
"$$$/Echo/AllChannel=所有声道"
"$$$/Echo/Delay=延迟时间:"
"$$$/Echo/DelayUnits=延迟时间单位:"
"$$$/Echo/EchoBOunce=回声反弹"
"$$$/Echo/EchoLevel=回声电平:"
"$$$/Echo/Equalization=连续回声均衡器"
"$$$/Echo/Feedback=回授:"
"$$$/Echo/LeftChannel=左声道"
"$$$/Echo/LockLeftRight=锁定左右声道"
"$$$/Echo/RightChannel=右声道"
"$$$/Echo/Slider/beats=beats"
"$$$/Echo/Slider/samples=采样"
"$$$/Edit/Number/Unit/Meter=m"
"$$$/Edit/Number/Unit/Name=单位名称"
"$$$/Edit/Number/Unit/Progress=%"
"$$$/Edit/Number/Unit/ReverbImpulseProgress=%"
"$$$/Edit/Number/Unit/x0=x"
"$$$/Edit/Number/Unit/x1=x"
"$$$/EditViewEffectEditorWindowXML/Apply=应用"
"$$$/EditViewEffectEditorWindowXML/Close=关闭"
"$$$/EditViewEffectEditorWindowXML/LoopToggleTT=循环开关"
"$$$/EditViewEffectEditorWindowXML/PowerTT=电源状态开关"
"$$$/EditViewEffectEditorWindowXML/PreviewPlayStopTT=预演播放/停止"
"$$$/EditorPanel/Popup/Close=关闭"
"$$$/EditorPanel/Popup/CloseAll=全部关闭"
"$$$/EffectEditorWindow/Help=显示此效果的帮助"
"$$$/EffectEditorWindow/OK=确定"
"$$$/EffectEditorWindow/SetSideChain=设置侧链输入"
"$$$/EffectEditorWindow/ShowChannelMapEditor=切换到通道映射编辑器"
"$$$/Effects/AdaptiveNoise/BroadbandPreservation=宽频保留"
"$$$/Effects/AdaptiveNoise/Complexity=复杂性"
"$$$/Effects/AdaptiveNoise/FFTSize=FFT 大小"
"$$$/Effects/AdaptiveNoise/FineTuneNoiseFloor=微调噪声基准"
"$$$/Effects/AdaptiveNoise/HighQualityMode=高品质模式(慢)"
"$$$/Effects/AdaptiveNoise/IsProcessing=正在处理"
"$$$/Effects/AdaptiveNoise/Noisiness=噪声量"
"$$$/Effects/AdaptiveNoise/ReduceNoiseBy=降噪依据"
"$$$/Effects/AdaptiveNoise/SignalThreshold=信号阈值"
"$$$/Effects/AdaptiveNoise/SpectralDecayRate=频谱衰减率"
"$$$/Effects/AdaptiveNoise/Threshold=阈值"
"$$$/Effects/AdaptiveNoiseProcessing=正在处理"
"$$$/Effects/Amplify/ChannelCount=声道计算"
"$$$/Effects/Amplify/Gain=增益"
"$$$/Effects/Amplify/LinkSliders=链接滑块"
"$$$/Effects/AutoPhaseCorrection/AnalysisSize=分析大小"
"$$$/Effects/AutoPhaseCorrection/AutoAlignChannels=自动分配声道"
"$$$/Effects/AutoPhaseCorrection/AutoCenterPanning=自动中置声相"
"$$$/Effects/AutoPhaseCorrection/Channel=声道"
"$$$/Effects/AutoPhaseCorrection/FrequencyScale=频率比例"
"$$$/Effects/AutoPhaseCorrection/GlobalTimeShift=全局时间变换"
"$$$/Effects/AutoPhaseCorrection/IsProcessing=正在处理"
"$$$/Effects/AutoPhaseCorrection/LeftChannelShift=左声道变换"
"$$$/Effects/AutoPhaseCorrection/Lock=锁定"
"$$$/Effects/AutoPhaseCorrection/Off=关闭"
"$$$/Effects/AutoPhaseCorrection/On=打开"
"$$$/Effects/AutoPhaseCorrection/RangeIndex=范围索引"
"$$$/Effects/AutoPhaseCorrection/Responsiveness=响应性"
"$$$/Effects/AutoPhaseCorrection/RightChannelShift=右声道变换"
"$$$/Effects/AutoPhaseCorrection/TimeResolution=时间分辨率"
"$$$/Effects/Bender/BaseBPM=BaseBPM"
"$$$/Effects/Bender/GraphFormat="
"$$$/Effects/Bender/Off=关闭"
"$$$/Effects/Bender/On=打开"
"$$$/Effects/Bender/Quality=品质"
"$$$/Effects/Bender/Range=范围"
"$$$/Effects/Bender/RangeBPM=RangeBPM"
"$$$/Effects/Bender/Splines=Splinesr"
"$$$/Effects/CenterChannelExtract/AmplitudeBandwidth=振幅带宽"
"$$$/Effects/CenterChannelExtract/AmplitudeDiscrimination=振幅差异"
"$$$/Effects/CenterChannelExtract/CenterChannelLevel=中置声道电平"
"$$$/Effects/CenterChannelExtract/CenterFrequency=中置频率"
"$$$/Effects/CenterChannelExtract/CrossoverBleed=Crossover Bleed"
"$$$/Effects/CenterChannelExtract/Delay=延迟"
"$$$/Effects/CenterChannelExtract/EndFrequency=End Frequency"
"$$$/Effects/CenterChannelExtract/Extract=Extract"
"$$$/Effects/CenterChannelExtract/FFTSize=FFT 大小"
"$$$/Effects/CenterChannelExtract/FrequencyWidth=频率范围"
"$$$/Effects/CenterChannelExtract/Interval=Interval"
"$$$/Effects/CenterChannelExtract/IsProcessing=Is Processing"
"$$$/Effects/CenterChannelExtract/OriginalSampleRate=Original Sample Rate"
"$$$/Effects/CenterChannelExtract/Overlays=Overlays"
"$$$/Effects/CenterChannelExtract/Pan=Pan"
"$$$/Effects/CenterChannelExtract/PhaseDegree=Phase Degree"
"$$$/Effects/CenterChannelExtract/PhaseDiscrimination=Phase Discrimination"
"$$$/Effects/CenterChannelExtract/SideChannelLevels=Side Channel Levels"
"$$$/Effects/CenterChannelExtract/SpectralDecayRate=Spectral Decay Rate"
"$$$/Effects/CenterChannelExtract/Spectrum=Spectrum"
"$$$/Effects/CenterChannelExtract/StartFrequency=Start Frequency"
"$$$/Effects/CenterChannelExtract/WindowWidth=Window Width"
"$$$/Effects/ChannelMixer/ChannelCount=声道计算"
"$$$/Effects/ChannelMixer/to=到"
"$$$/Effects/Chorus/AddoBinauralCues=添加双声道提示"
"$$$/Effects/Chorus/AverageInputs=平均左、右声道输入"
"$$$/Effects/Chorus/DelayRate=延迟率"
"$$$/Effects/Chorus/DelayTime=延迟时间"
"$$$/Effects/Chorus/DryOutputLevel=干声输出电平"
"$$$/Effects/Chorus/Feedback=回授"
"$$$/Effects/Chorus/HighestQuality=最高品质"
"$$$/Effects/Chorus/ModulationDepth=调制深度"
"$$$/Effects/Chorus/ModulationRate=调制率"
"$$$/Effects/Chorus/Off=关闭"
"$$$/Effects/Chorus/On=打开"
"$$$/Effects/Chorus/Spread=扩散"
"$$$/Effects/Chorus/StereoField=立体声区域"
"$$$/Effects/Chorus/Voices=声音"
"$$$/Effects/Chorus/WetOutputLevel=湿声输出电平"
"$$$/Effects/Delay/LeftDelayTime=左声道延迟时间"
"$$$/Effects/Delay/LeftInvert=反转左声道"
"$$$/Effects/Delay/LeftMix=左声道混合"
"$$$/Effects/Delay/NumChannels=声道数"
"$$$/Effects/Delay/Off=关闭"
"$$$/Effects/Delay/On=打开"
"$$$/Effects/Delay/OnChannelsChanged/Delay=延迟时间"
"$$$/Effects/Delay/OnChannelsChanged/Invert=反转所有声道"
"$$$/Effects/Delay/OnChannelsChanged/Mix=混合"
"$$$/Effects/Delay/OnChannelsChanged/NumChannels=声道数"
"$$$/Effects/Delay/OnChannelsChanged/Off=关闭"
"$$$/Effects/Delay/OnChannelsChanged/On=打开"
"$$$/Effects/Delay/OnChannelsChanged/RightDelayTime=右声道延迟时间"
"$$$/Effects/Delay/OnChannelsChanged/RightInvert=反转右声道"
"$$$/Effects/Delay/OnChannelsChanged/RightMix=右声道混合"
"$$$/Effects/Delay/OnChannelsChanged/TimeUnit=延迟时间单位"
"$$$/Effects/Delay/RightDelayTime=右声道延迟时间"
"$$$/Effects/Delay/RightInvert=反转右声道"
"$$$/Effects/Delay/RightMix=右声道混合"
"$$$/Effects/Delay/TimeUnit=延迟时间单位"
"$$$/Effects/Doppler/AdjustDirection=Adjust Direction"
"$$$/Effects/Doppler/AdjustDistance=Adjust Distance"
"$$$/Effects/Doppler/Circular=Circular"
"$$$/Effects/Doppler/Direction=Direction"
"$$$/Effects/Doppler/Front=Front"
"$$$/Effects/Doppler/Off=Off"
"$$$/Effects/Doppler/On=On"
"$$$/Effects/Doppler/Preview=Preview"
"$$$/Effects/Doppler/Processing=Processing"
"$$$/Effects/Doppler/Quality=Quality"
"$$$/Effects/Doppler/Right=Right"
"$$$/Effects/Doppler/StartingDistance=Starting Distance"
"$$$/Effects/Doppler/Velocity=Velocity"
"$$$/Effects/Dynamics/AddPoint=添加节点"
"$$$/Effects/Dynamics/CurrentTab=当前标签"
"$$$/Effects/Dynamics/DeletePoint=删除节点"
"$$$/Effects/Dynamics/EnvelopeOnly=只有包络"
"$$$/Effects/Dynamics/GainAttackTime=增益处理 - 触发时间"
"$$$/Effects/Dynamics/GainReleaseTime=增益处理 - 释放时间"
"$$$/Effects/Dynamics/HighCutoff=高频切除"
"$$$/Effects/Dynamics/InputGain=输入增益"
"$$$/Effects/Dynamics/Invert=反转"
"$$$/Effects/Dynamics/LeveAttackTime=电平检测 - 触发时间"
"$$$/Effects/Dynamics/LevelReleaseTime=电平检测 - 释放时间"
"$$$/Effects/Dynamics/LinkChannels=链接声道"
"$$$/Effects/Dynamics/LockFilter=锁定滤波"
"$$$/Effects/Dynamics/LookaheadTime=预测时间"
"$$$/Effects/Dynamics/LowCutoff=低频切除"
"$$$/Effects/Dynamics/MakeupGain=补偿增益"
"$$$/Effects/Dynamics/NoiseGatingIf=噪声门控制（如果扩展多于 50:1）"
"$$$/Effects/Dynamics/Off=关闭"
"$$$/Effects/Dynamics/On=打开"
"$$$/Effects/Dynamics/OutputGain=输出增益"
"$$$/Effects/Dynamics/PeakRMS=峰值/RMS"
"$$$/Effects/Dynamics/Reset=重置"
"$$$/Effects/Dynamics/SideChainIn=侧链输入"
"$$$/Effects/Dynamics/SplineCurves=曲线"
"$$$/Effects/Dynamics/XYCount=X/Y 配对数量"
"$$$/Effects/Dynamics/pairs=配对"
"$$$/Effects/Echo/DecayLeft=回授（左声道）"
"$$$/Effects/Echo/DecayRight=回授（右声道）"
"$$$/Effects/Echo/DelayLeft=延迟时间（左声道）"
"$$$/Effects/Echo/DelayRight=延迟时间（右声道）"
"$$$/Effects/Echo/EQGain1=EQ 频段 1"
"$$$/Effects/Echo/EQGain2=EQ 频段 2"
"$$$/Effects/Echo/EQGain3=EQ 频段 3"
"$$$/Effects/Echo/EQGain4=EQ 频段 4"
"$$$/Effects/Echo/EQGain5=EQ 频段 5"
"$$$/Effects/Echo/EQGain6=EQ 频段 6"
"$$$/Effects/Echo/EQGain7=EQ 频段 7"
"$$$/Effects/Echo/EQGain8=EQ 频段 8"
"$$$/Effects/Echo/EchoBounce=回声反弹"
"$$$/Effects/Echo/InitEchoLeft=回声电平（左声道）"
"$$$/Effects/Echo/InitEchoRight=回声电平（右声道）"
"$$$/Effects/Echo/LockLR=锁定左右声道"
"$$$/Effects/Echo/NumChannels=声道数量"
"$$$/Effects/Echo/Off=关闭"
"$$$/Effects/Echo/On=打开"
"$$$/Effects/Echo/OnChannelsChanged/DecayRight=回授（右声道）"
"$$$/Effects/Echo/OnChannelsChanged/Delay=延迟时间"
"$$$/Effects/Echo/OnChannelsChanged/DelayRight=延迟时间（右声道）"
"$$$/Effects/Echo/OnChannelsChanged/EQGain1=EQ 频段 1"
"$$$/Effects/Echo/OnChannelsChanged/EQGain2=EQ 频段 2"
"$$$/Effects/Echo/OnChannelsChanged/EQGain3=EQ 频段 3"
"$$$/Effects/Echo/OnChannelsChanged/EQGain4=EQ 频段 4"
"$$$/Effects/Echo/OnChannelsChanged/EQGain5=EQ 频段 5"
"$$$/Effects/Echo/OnChannelsChanged/EQGain6=EQ 频段 6"
"$$$/Effects/Echo/OnChannelsChanged/EQGain7=EQ 频段 7"
"$$$/Effects/Echo/OnChannelsChanged/EQGain8=EQ 频段 8"
"$$$/Effects/Echo/OnChannelsChanged/EchoBounce=回声反弹"
"$$$/Effects/Echo/OnChannelsChanged/Feedback=回授"
"$$$/Effects/Echo/OnChannelsChanged/InitEcho=回声电平"
"$$$/Effects/Echo/OnChannelsChanged/InitEchoRight=回声电平（右声道）"
"$$$/Effects/Echo/OnChannelsChanged/LockLR=锁定左右声道"
"$$$/Effects/Echo/OnChannelsChanged/NumChannels=声道数量"
"$$$/Effects/Echo/OnChannelsChanged/Off=关闭"
"$$$/Effects/Echo/OnChannelsChanged/On=打开"
"$$$/Effects/Echo/OnChannelsChanged/TimeUnit=延迟时间单位"
"$$$/Effects/Echo/TimeUnit=延迟时间单位"
"$$$/Effects/FFTFilter/FFTSize=FFT 大小"
"$$$/Effects/FFTFilter/FrequencyEnd=频率结束"
"$$$/Effects/FFTFilter/FrequencyStart=频率开始"
"$$$/Effects/FFTFilter/GainEnd=增益结束"
"$$$/Effects/FFTFilter/GainStart=增益开始"
"$$$/Effects/FFTFilter/Linear=线性"
"$$$/Effects/FFTFilter/Lock=锁定"
"$$$/Effects/FFTFilter/Logarithmic=对数"
"$$$/Effects/FFTFilter/NumberOfPairs=X/Y 配对数量"
"$$$/Effects/FFTFilter/Off=关闭"
"$$$/Effects/FFTFilter/On=打开"
"$$$/Effects/FFTFilter/Scale=缩放"
"$$$/Effects/FFTFilter/Splines=曲线"
"$$$/Effects/FFTFilter/WindowType=窗口类型"
"$$$/Effects/FFTFilter/XCoord_NUM=X @0"
"$$$/Effects/FFTFilter/YCoord_NUM=Y @0"
"$$$/Effects/Flanger/Feedback=回授"
"$$$/Effects/Flanger/FinalDelayTime=最终延迟时间"
"$$$/Effects/Flanger/InitialDelayTime=初始延迟时间"
"$$$/Effects/Flanger/Inverted=反转模式"
"$$$/Effects/Flanger/Mix=混合"
"$$$/Effects/Flanger/ModRateBeats=调制速率（节拍）"
"$$$/Effects/Flanger/ModRateFreq=调制速率（频率）"
"$$$/Effects/Flanger/Off=关闭"
"$$$/Effects/Flanger/On=打开"
"$$$/Effects/Flanger/Sinusoidal=正弦曲线模式"
"$$$/Effects/Flanger/SpecialFX=特殊效果模式"
"$$$/Effects/Flanger/StereoPhasing=立体声相位"
"$$$/Effects/FullReverb/CalculationImpulse=计算脉冲"
"$$$/Effects/FullReverb/DecayFilterMultiple=计算衰减"
"$$$/Effects/FullReverb/Diffusion=漫射"
"$$$/Effects/FullReverb/EarlyDimension=尺度"
"$$$/Effects/FullReverb/EarlyHighPass=早反射高通切除"
"$$$/Effects/FullReverb/EarlyLocation=左/右位置"
"$$$/Effects/FullReverb/EarlyRoomSize=房间大小"
"$$$/Effects/FullReverb/HighGain=上限增益"
"$$$/Effects/FullReverb/HighHz=上限频率"
"$$$/Effects/FullReverb/IncludeDirect=包含直通"
"$$$/Effects/FullReverb/IsProcessing=处理"
"$$$/Effects/FullReverb/LowGain=下限增益"
"$$$/Effects/FullReverb/LowHz=下限频率"
"$$$/Effects/FullReverb/MidGain=中度着色增益"
"$$$/Effects/FullReverb/MidHz=中度着色中央频率"
"$$$/Effects/FullReverb/MidQ=中度着色 Q"
"$$$/Effects/FullReverb/NumChannels=声道数量"
"$$$/Effects/FullReverb/OriginalSampleRate=原始采样率"
"$$$/Effects/FullReverb/OutputLevelDry=输出电平（干声）"
"$$$/Effects/FullReverb/OutputLevelEarlyReflections=输出电平（早反射）"
"$$$/Effects/FullReverb/OutputLevelReverberation=输出电平（混响）"
"$$$/Effects/FullReverb/Perception=感知"
"$$$/Effects/FullReverb/PreDelayTime=混响预延迟时间"
"$$$/Effects/FullReverb/ReverbDecayTime=混响衰减时间"
"$$$/Effects/FullReverb/RoomDepth=房间深度"
"$$$/Effects/FullReverb/RoomHeight=房间高度"
"$$$/Effects/FullReverb/RoomWidth=房间宽度"
"$$$/Effects/FullReverb/SetReverbBasedOnRoomSize=基于房间大小设置混响"
"$$$/Effects/FullReverb/SumInputs=总输入"
"$$$/Effects/GraphicEQ10/Accuracy=精度"
"$$$/Effects/GraphicEQ10/Band1=EQ 频段 1"
"$$$/Effects/GraphicEQ10/Band10=EQ 频段 10"
"$$$/Effects/GraphicEQ10/Band2=EQ 频段 2"
"$$$/Effects/GraphicEQ10/Band3=EQ 频段 3"
"$$$/Effects/GraphicEQ10/Band4=EQ 频段 4"
"$$$/Effects/GraphicEQ10/Band5=EQ 频段 5"
"$$$/Effects/GraphicEQ10/Band6=EQ 频段 6"
"$$$/Effects/GraphicEQ10/Band7=EQ 频段 7"
"$$$/Effects/GraphicEQ10/Band8=EQ 频段 8"
"$$$/Effects/GraphicEQ10/Band9=EQ 频段 9"
"$$$/Effects/GraphicEQ10/Gain=主控增益"
"$$$/Effects/GraphicEQ10/IsProcessing=正在处理"
"$$$/Effects/GraphicEQ10/Range=范围"
"$$$/Effects/GraphicEQ10/Reset=重置"
"$$$/Effects/GraphicEQ20/Accuracy=精度"
"$$$/Effects/GraphicEQ20/EQBand1=EQ 频段 1"
"$$$/Effects/GraphicEQ20/EQBand10=EQ 频段 10"
"$$$/Effects/GraphicEQ20/EQBand11=EQ 频段 11"
"$$$/Effects/GraphicEQ20/EQBand12=EQ 频段 12"
"$$$/Effects/GraphicEQ20/EQBand13=EQ 频段 13"
"$$$/Effects/GraphicEQ20/EQBand14=EQ 频段 14"
"$$$/Effects/GraphicEQ20/EQBand15=EQ 频段 15"
"$$$/Effects/GraphicEQ20/EQBand16=EQ 频段 16"
"$$$/Effects/GraphicEQ20/EQBand17=EQ 频段 17"
"$$$/Effects/GraphicEQ20/EQBand18=EQ 频段 18"
"$$$/Effects/GraphicEQ20/EQBand19=EQ 频段 19"
"$$$/Effects/GraphicEQ20/EQBand2=EQ 频段 2"
"$$$/Effects/GraphicEQ20/EQBand20=EQ 频段 20"
"$$$/Effects/GraphicEQ20/EQBand3=EQ 频段 3"
"$$$/Effects/GraphicEQ20/EQBand4=EQ 频段 4"
"$$$/Effects/GraphicEQ20/EQBand5=EQ 频段 5"
"$$$/Effects/GraphicEQ20/EQBand6=EQ 频段 6"
"$$$/Effects/GraphicEQ20/EQBand7=EQ 频段 7"
"$$$/Effects/GraphicEQ20/EQBand8=EQ 频段 8"
"$$$/Effects/GraphicEQ20/EQBand9=EQ 频段 9"
"$$$/Effects/GraphicEQ20/Gain=增益"
"$$$/Effects/GraphicEQ20/IsProcessing=正在处理"
"$$$/Effects/GraphicEQ20/Range=范围"
"$$$/Effects/GraphicEQ20/Reset=重置"
"$$$/Effects/GraphicEQ30/Accuracy=精度"
"$$$/Effects/GraphicEQ30/EQBand1=EQ 频段 1"
"$$$/Effects/GraphicEQ30/EQBand10=EQ 频段 10"
"$$$/Effects/GraphicEQ30/EQBand11=EQ 频段 11"
"$$$/Effects/GraphicEQ30/EQBand12=EQ 频段 12"
"$$$/Effects/GraphicEQ30/EQBand13=EQ 频段 13"
"$$$/Effects/GraphicEQ30/EQBand14=EQ 频段 14"
"$$$/Effects/GraphicEQ30/EQBand15=EQ 频段 15"
"$$$/Effects/GraphicEQ30/EQBand16=EQ 频段 16"
"$$$/Effects/GraphicEQ30/EQBand17=EQ 频段 17"
"$$$/Effects/GraphicEQ30/EQBand18=EQ 频段 18"
"$$$/Effects/GraphicEQ30/EQBand19=EQ 频段 19"
"$$$/Effects/GraphicEQ30/EQBand2=EQ 频段 2"
"$$$/Effects/GraphicEQ30/EQBand20=EQ 频段 20"
"$$$/Effects/GraphicEQ30/EQBand21=EQ 频段 21"
"$$$/Effects/GraphicEQ30/EQBand22=EQ 频段 22"
"$$$/Effects/GraphicEQ30/EQBand23=EQ 频段 23"
"$$$/Effects/GraphicEQ30/EQBand24=EQ 频段 24"
"$$$/Effects/GraphicEQ30/EQBand25=EQ 频段 25"
"$$$/Effects/GraphicEQ30/EQBand26=EQ 频段 26"
"$$$/Effects/GraphicEQ30/EQBand27=EQ 频段 27"
"$$$/Effects/GraphicEQ30/EQBand28=EQ 频段 28"
"$$$/Effects/GraphicEQ30/EQBand29=EQ 频段 29"
"$$$/Effects/GraphicEQ30/EQBand3=EQ 频段 3"
"$$$/Effects/GraphicEQ30/EQBand30=EQ 频段 30"
"$$$/Effects/GraphicEQ30/EQBand4=EQ 频段 4"
"$$$/Effects/GraphicEQ30/EQBand5=EQ 频段 5"
"$$$/Effects/GraphicEQ30/EQBand6=EQ 频段 6"
"$$$/Effects/GraphicEQ30/EQBand7=EQ 频段 7"
"$$$/Effects/GraphicEQ30/EQBand8=EQ 频段 8"
"$$$/Effects/GraphicEQ30/EQBand9=EQ 频段 9"
"$$$/Effects/GraphicEQ30/Gain=增益"
"$$$/Effects/GraphicEQ30/IsProcessing=正在处理"
"$$$/Effects/GraphicEQ30/Range=范围"
"$$$/Effects/GraphicEQ30/Reset=重置"
"$$$/Effects/GraphicPhaseShifter/AngleEnd=Angle End"
"$$$/Effects/GraphicPhaseShifter/AngleStart=Angle Start"
"$$$/Effects/GraphicPhaseShifter/Channel=Channel"
"$$$/Effects/GraphicPhaseShifter/FFTSize=FFT Size"
"$$$/Effects/GraphicPhaseShifter/FrequencyEnd=Frequency End"
"$$$/Effects/GraphicPhaseShifter/FrequencyStart=Frequency Start"
"$$$/Effects/GraphicPhaseShifter/Linear=Linear"
"$$$/Effects/GraphicPhaseShifter/Lock=Lock"
"$$$/Effects/GraphicPhaseShifter/Logarithmic=Logarithmic"
"$$$/Effects/GraphicPhaseShifter/NumberOfPairs=Number of X/Y pairs"
"$$$/Effects/GraphicPhaseShifter/Off=Off"
"$$$/Effects/GraphicPhaseShifter/On=On"
"$$$/Effects/GraphicPhaseShifter/Scale=Scale"
"$$$/Effects/GraphicPhaseShifter/Splines=Splines"
"$$$/Effects/GraphicPhaseShifter/VerticalRange=Vertical Range"
"$$$/Effects/GraphicPhaseShifter/XCoord_NUM=X @0"
"$$$/Effects/GraphicPhaseShifter/YCoord_NUM=Y @0"
"$$$/Effects/HardLimiter/InputBoost=输入提升"
"$$$/Effects/HardLimiter/LinkChannels=链接声道"
"$$$/Effects/HardLimiter/LookAheadTime=预测时间"
"$$$/Effects/HardLimiter/MaximumAmplitude=最大振幅"
"$$$/Effects/HardLimiter/ReleaseTime=释放时间"
"$$$/Effects/IntraClipComponent/AmplificationMeter=放大表"
"$$$/Effects/IntraClipComponent/BoosLowSignals=提升低信号"
"$$$/Effects/IntraClipComponent/CompressorActive=压限操作"
"$$$/Effects/IntraClipComponent/CompressorThreshold=压限阈值"
"$$$/Effects/IntraClipComponent/LevelingAmount=电平量"
"$$$/Effects/IntraClipComponent/NoiseGateActive=噪声门操作"
"$$$/Effects/IntraClipComponent/NoiseThresholdOffset=噪声偏移"
"$$$/Effects/IntraClipComponent/Off=关闭"
"$$$/Effects/IntraClipComponent/On=打开"
"$$$/Effects/IntraClipComponent/TargetVolumeLevel=目标音量电平"
"$$$/Effects/MonoIn=Mono In"
"$$$/Effects/MonoOut=Mono Out"
"$$$/Effects/MultiIn=Multichannel In"
"$$$/Effects/MultiOut=Multichannel Out"
"$$$/Effects/Notch/AllGain=Fixed Gain"
"$$$/Effects/Notch/AttenAll=Amplify All"
"$$$/Effects/Notch/DTMFLower=DTMF Lower"
"$$$/Effects/Notch/DTMFLowerAtten=DTMF Lower Attenuation"
"$$$/Effects/Notch/DTMFUpper=DTMF Upper"
"$$$/Effects/Notch/DTMFUpperAtten=DTMF Upper Attenuation"
"$$$/Effects/Notch/Enable1=Enable 1"
"$$$/Effects/Notch/Enable2=Enable 2"
"$$$/Effects/Notch/Enable3=Enable 3"
"$$$/Effects/Notch/Enable4=Enable 4"
"$$$/Effects/Notch/Enable5=Enable 5"
"$$$/Effects/Notch/Enable6=Enable 6"
"$$$/Effects/Notch/Freq1=Frequency 1"
"$$$/Effects/Notch/Freq2=Frequency 2"
"$$$/Effects/Notch/Freq3=Frequency 3"
"$$$/Effects/Notch/Freq4=Frequency 4"
"$$$/Effects/Notch/Freq5=Frequency 5"
"$$$/Effects/Notch/Freq6=Frequency 6"
"$$$/Effects/Notch/Gain1=Gain 1"
"$$$/Effects/Notch/Gain2=Gain 2"
"$$$/Effects/Notch/Gain3=Gain 3"
"$$$/Effects/Notch/Gain4=Gain 4"
"$$$/Effects/Notch/Gain5=Gain 5"
"$$$/Effects/Notch/Gain6=Gain 6"
"$$$/Effects/Notch/NotchWidth=Notch Width"
"$$$/Effects/Notch/Off=Off"
"$$$/Effects/Notch/On=On"
"$$$/Effects/Notch/UltraQuiet=Ultra Quiet"
"$$$/Effects/ParametricEQ/Band1Bandwidth=EQ 频段 1 宽广度"
"$$$/Effects/ParametricEQ/Band1Enable=EQ 频段 1 启用"
"$$$/Effects/ParametricEQ/Band1Freq=EQ 频段 1 中央频率"
"$$$/Effects/ParametricEQ/Band1Gain=EQ 频段 1 增益"
"$$$/Effects/ParametricEQ/Band1Q=EQ 频段 1 Q"
"$$$/Effects/ParametricEQ/Band2Bandwidth=EQ 频段 2 宽广度"
"$$$/Effects/ParametricEQ/Band2Enable=EQ 频段 2 启用"
"$$$/Effects/ParametricEQ/Band2Freq=EQ 频段 2 中央频率"
"$$$/Effects/ParametricEQ/Band2Gain=EQ 频段 2 增益"
"$$$/Effects/ParametricEQ/Band2Q=EQ 频段 2 Q"
"$$$/Effects/ParametricEQ/Band3Bandwidth=EQ 频段 3 宽广度"
"$$$/Effects/ParametricEQ/Band3Enable=EQ 频段 3 启用"
"$$$/Effects/ParametricEQ/Band3Freq=EQ 频段 3 中央频率"
"$$$/Effects/ParametricEQ/Band3Gain=EQ 频段 3 增益"
"$$$/Effects/ParametricEQ/Band3Q=EQ 频段 3 Q"
"$$$/Effects/ParametricEQ/Band4Bandwidth=EQ 频段 4 宽广度"
"$$$/Effects/ParametricEQ/Band4Enable=EQ 频段 4 启用"
"$$$/Effects/ParametricEQ/Band4Freq=EQ 频段 4 中央频率"
"$$$/Effects/ParametricEQ/Band4Gain=EQ 频段 4 增益"
"$$$/Effects/ParametricEQ/Band4Q=EQ 频段 4 Q"
"$$$/Effects/ParametricEQ/Band5Bandwidth=EQ 频段 5 宽广度"
"$$$/Effects/ParametricEQ/Band5Enable=EQ 频段 5 启用"
"$$$/Effects/ParametricEQ/Band5Freq=EQ 频段 5 中央频率"
"$$$/Effects/ParametricEQ/Band5Gain=EQ 频段 5 增益"
"$$$/Effects/ParametricEQ/Band5Q=EQ 频段 5 Q"
"$$$/Effects/ParametricEQ/Bypass=旁路"
"$$$/Effects/ParametricEQ/ConstantQ=恒定Q"
"$$$/Effects/ParametricEQ/FirstOrder=首次指令"
"$$$/Effects/ParametricEQ/HiPassFreq=高通切除频率"
"$$$/Effects/ParametricEQ/HiPassSlope=高通斜率"
"$$$/Effects/ParametricEQ/HighPassEnable=高通滤波启用"
"$$$/Effects/ParametricEQ/HighShelfAmp=上限增益"
"$$$/Effects/ParametricEQ/HighShelfCutoff=上限频率"
"$$$/Effects/ParametricEQ/HighShelfEnable=上限启用"
"$$$/Effects/ParametricEQ/HighShelfOrder=上限滤波"
"$$$/Effects/ParametricEQ/LoPassEnable=下限滤波启用"
"$$$/Effects/ParametricEQ/LoPassFreq=下限切除频率"
"$$$/Effects/ParametricEQ/LoPassSlope=下限斜率"
"$$$/Effects/ParametricEQ/LowGraphRange=下限图示范围"
"$$$/Effects/ParametricEQ/LowShelfAmp=下限增益"
"$$$/Effects/ParametricEQ/LowShelfEnable=下限启用"
"$$$/Effects/ParametricEQ/LowShelfFrequency=下限频率"
"$$$/Effects/ParametricEQ/LowShelfOrder=下限滤波指令"
"$$$/Effects/ParametricEQ/MasterGain=主体增益"
"$$$/Effects/ParametricEQ/Off=关闭"
"$$$/Effects/ParametricEQ/On=打开"
"$$$/Effects/ParametricEQ/OriginalSampleRate=原始采样率"
"$$$/Effects/ParametricEQ/SecondOrder=二次指令"
"$$$/Effects/ParametricEQ/UltraQuiet=超静音模式"
"$$$/Effects/PitchCorrect/A4Freq=A4 Frequency"
"$$$/Effects/PitchCorrect/AMinor=A Minor"
"$$$/Effects/PitchCorrect/Attack=Attack"
"$$$/Effects/PitchCorrect/CMajor=C Major"
"$$$/Effects/PitchCorrect/ExtremeCorrection=Extreme Correction"
"$$$/Effects/PitchCorrect/FFTSize=FFT Size"
"$$$/Effects/PitchCorrect/Key=Key"
"$$$/Effects/PitchCorrect/LeftRef=Reference Channel"
"$$$/Effects/PitchCorrect/Meter=Meter"
"$$$/Effects/PitchCorrect/PreviewMode=Preview Mode"
"$$$/Effects/PitchCorrect/Scale=Scale"
"$$$/Effects/PitchCorrect/ScaleParamChromatic=Chromatic"
"$$$/Effects/PitchCorrect/ScaleParamMajor=Major"
"$$$/Effects/PitchCorrect/ScaleParamMinor=Minor"
"$$$/Effects/PitchCorrect/Sensitivity=Sensitivity"
"$$$/Effects/PitchCorrect/Spline=Splines"
"$$$/Effects/PitchCorrect/SubtleVocalCorrection=Subtle Vocal Correction"
"$$$/Effects/Reverb/AttackTime=预延迟时间"
"$$$/Effects/Reverb/CalculatingImpulse=计算脉冲"
"$$$/Effects/Reverb/CombineChannels=总输入"
"$$$/Effects/Reverb/DissipateTime=漫射"
"$$$/Effects/Reverb/IsProcessing=处理"
"$$$/Effects/Reverb/OriginalMix=干声输出电平"
"$$$/Effects/Reverb/Perception=感知"
"$$$/Effects/Reverb/ReverbMix=湿声输出电平"
"$$$/Effects/Reverb/ReverbTime=衰减时间"
"$$$/Effects/StereoIn=立体声输入"
"$$$/Effects/StereoOut=立体声输出"
"$$$/Effects/Stretch/Automatic=选择适当的默认值"
"$$$/Effects/Stretch/ConstantVowels=元音不变"
"$$$/Effects/Stretch/Cutoff=拼合频率"
"$$$/Effects/Stretch/GlidingStretch=平滑伸缩"
"$$$/Effects/Stretch/IsProcessing=正在处理"
"$$$/Effects/Stretch/LockDuration=锁定持续时间"
"$$$/Effects/Stretch/LockStretchAndPitchShift=锁定伸缩与变调"
"$$$/Effects/Stretch/NewDuration=新的持续时间"
"$$$/Effects/Stretch/Overlapping=重叠"
"$$$/Effects/Stretch/Percent=伸缩量"
"$$$/Effects/Stretch/Percent2=最终伸缩量"
"$$$/Effects/Stretch/PitchCoherence=音调一致"
"$$$/Effects/Stretch/PitchShift=变调"
"$$$/Effects/Stretch/PitchShift2=最终变调"
"$$$/Effects/Stretch/PreserveFormant=保持语音特性"
"$$$/Effects/Stretch/PreservePitch=保持音调"
"$$$/Effects/Stretch/PreviewMode=预演模式"
"$$$/Effects/Stretch/Quality=精度"
"$$$/Effects/Stretch/Semitones=半音阶"
"$$$/Effects/Stretch/SoloVoice=乐器或声音独奏"
"$$$/Effects/Stretch/Spectral=频谱"
"$$$/Effects/Stretch/UseRadius=使用 iZotope 半径"
"$$$/Effects/StudioReverb/Damping=阻尼"
"$$$/Effects/StudioReverb/Decay=衰减"
"$$$/Effects/StudioReverb/Diffusion=漫射"
"$$$/Effects/StudioReverb/Dry=干声输出电平"
"$$$/Effects/StudioReverb/EarlyReflections=早反射"
"$$$/Effects/StudioReverb/EarlyReflectionsDelay=早反射延迟"
"$$$/Effects/StudioReverb/HPCutoff=高频切除"
"$$$/Effects/StudioReverb/IsProcessing=正在处理"
"$$$/Effects/StudioReverb/LPCutoff=低频切除"
"$$$/Effects/StudioReverb/Room=房间大小"
"$$$/Effects/StudioReverb/Wet=湿声输出电平"
"$$$/Effects/StudioReverb/Width=宽广度"
"$$$/Effects/StudioReverb/channels=声道数"
"$$$/Effects/Surround51In=Surround 5.1 In"
"$$$/Effects/Surround51Out=Surround 5.1 Out"
"$$$/Effects/Tones/C1Enable=C1 Enable"
"$$$/Effects/Tones/C2Enable=C2 Enable"
"$$$/Effects/Tones/C3Enable=C3 Enable"
"$$$/Effects/Tones/C4Enable=C4 Enable"
"$$$/Effects/Tones/C5Enable=C5 Enable"
"$$$/Effects/Tones/DCOffset=DCOffset"
"$$$/Effects/Tones/F1=F1"
"$$$/Effects/Tones/F2=F2"
"$$$/Effects/Tones/F3=F3"
"$$$/Effects/Tones/F4=F4"
"$$$/Effects/Tones/F5=F5"
"$$$/Effects/Tones/Fi1=Fi1"
"$$$/Effects/Tones/Fi2=Fi2"
"$$$/Effects/Tones/Fi3=Fi3"
"$$$/Effects/Tones/Fi4=Fi4"
"$$$/Effects/Tones/Fi5=Fi5"
"$$$/Effects/Tones/FinalFrequency=Final Frequency"
"$$$/Effects/Tones/FinalModulateBy=Final ModulateBy"
"$$$/Effects/Tones/FinalModulateFreq=Final ModulateFreq"
"$$$/Effects/Tones/FinalOvertones0=FinalOvertones 0"
"$$$/Effects/Tones/FinalOvertones1=FinalOvertones 1"
"$$$/Effects/Tones/FinalOvertones2=FinalOvertones 2"
"$$$/Effects/Tones/FinalOvertones3=FinalOvertones 3"
"$$$/Effects/Tones/FinalOvertones4=FinalOvertones 4"
"$$$/Effects/Tones/FinalSubFlavor=FinalSubFlavor"
"$$$/Effects/Tones/Flavor=Flavor"
"$$$/Effects/Tones/Frequency=Frequency"
"$$$/Effects/Tones/InteractionMode=Interaction Mode"
"$$$/Effects/Tones/Locked=Locked"
"$$$/Effects/Tones/LogSweeping=LogSweeping"
"$$$/Effects/Tones/ModulateBy=ModulateBy"
"$$$/Effects/Tones/ModulateFreq=ModulateFreq"
"$$$/Effects/Tones/NoiseDuration=NoiseDuration"
"$$$/Effects/Tones/OriginalSampleRate=Original Sample Rate"
"$$$/Effects/Tones/Overtones0=Overtones 0"
"$$$/Effects/Tones/Overtones1=Overtones 1"
"$$$/Effects/Tones/Overtones2=Overtones 2"
"$$$/Effects/Tones/Overtones3=Overtones 3"
"$$$/Effects/Tones/Overtones4=Overtones 4"
"$$$/Effects/Tones/PhaseDeltaQ=PhaseDeltaQ"
"$$$/Effects/Tones/PhaseDiff=Phase Diff"
"$$$/Effects/Tones/Preview=Preview"
"$$$/Effects/Tones/StartPhase=Start Phase"
"$$$/Effects/Tones/SubFlavor=SubFlavor"
"$$$/Effects/Tones/Volume=Gain"
"$$$/EffectsPrefsXML/EffectMenuSortOrderLabel=Sort Effect Menu By:"
"$$$/EffectsPrefsXML/PopupSortCategory=Category"
"$$$/EffectsPrefsXML/PopupSortCategoryVendor=Category, Vendor"
"$$$/EffectsPrefsXML/PopupSortNone=None"
"$$$/EffectsPrefsXML/PopupSortVendor=Vendor"
"$$$/EffectsPrefsXML/PopupSortVendorCategory=Vendor, Category"
"$$$/EffectsPrefsXML/ProcessBypassedEffectsDuringPlayback=在回放期间处理旁路效果"
"$$$/EffectsPrefsXML/ProcessBypassedEffectsDuringPlaybackTT=决定是否在回放期间旁路效果被处理（在开关效果时增加响应度）或释放（提供回放性能）"
"$$$/EffectsRackPanel/ClipEffects=素材效果"
"$$$/EffectsRackPanel/Dry=干声"
"$$$/EffectsRackPanel/PrePostFaderTT=FX 预衰减/后衰减"
"$$$/EffectsRackPanel/PreRenderTT=预渲染声轨"
"$$$/EffectsRackPanel/ToggleIOTT=切换输入/输出/混合控制"
"$$$/EffectsRackPanel/TrackEffects=声轨效果"
"$$$/EffectsRackPanel/Wet=湿声"
"$$$/EffectsRackPanelXML/EntireFile=完整文件"
"$$$/EffectsRackPanelXML/Input=输入:"
"$$$/EffectsRackPanelXML/Mix=混合:"
"$$$/EffectsRackPanelXML/Output=输出:"
"$$$/EffectsRackPanelXML/Percent=%"
"$$$/EffectsRackPanelXML/Presets=预设:"
"$$$/EffectsRackPanelXML/Process=处理:"
"$$$/EffectsRackPanelXML/SelectionOnly=仅选中区域"
"$$$/ErrorManager/Explanation=@APPNAME 遇到一个致命错误而需要关闭。"
"$$$/ErrorManager/OK=确定"
"$$$/ErrorManager/Title=@APPNAME 错误"
"$$$/ExportMarkerRangesDialogXML/UseMarkerNamesinFilenames=在文件名内使用标记名称"
"$$$/ExportMixdownOptionsDialog/EmbedEditOriginal=Embed Edit Original link data"
"$$$/ExportMixdownOptionsDialog/EntireSession=Entire Session"
"$$$/ExportMixdownOptionsDialog/MixdownSource=Mixdown Source:"
"$$$/ExportMixdownOptionsDialog/MixdownSourceDesc=Each source will be mixed down into separate files."
"$$$/ExportMixdownOptionsDialog/MultipleExportWarningTT=Exporting multiple sources will append each source ID to the end of the specified file name."
"$$$/ExportMixdownOptionsDialog/Range=Range:"
"$$$/ExportMixdownOptionsDialog/Selection=Time Selection"
"$$$/FFTFilter/FFTFilterGraph/Frequency=频率:"
"$$$/FFTFilter/FFTFilterGraph/Hz=Hz"
"$$$/FFTFilter/FFTFilterGraph/Level=电平:"
"$$$/FFTFilter/FFTFilterGraph/dB=dB"
"$$$/FFTFilter/Scale=缩放:"
"$$$/FFTFilter/WindowType/Blackman=Blackman"
"$$$/FFTFilter/WindowType/BlackmanHarris=Blackman-Harris"
"$$$/FFTFilter/WindowType/Gaussian=Gaussian"
"$$$/FFTFilter/WindowType/Hamming=Hamming"
"$$$/FFTFilter/WindowType/Hann=Hann"
"$$$/FFTFilter/WindowType/Kaiser140=Kaiser (140 dB)"
"$$$/FFTFilter/WindowType/Kaiser180=Kaiser (180 dB)"
"$$$/FFTFilter/WindowType/Triangular=Triangular"
"$$$/FFTFilterUI/Advanced=高级"
"$$$/FFTFilterUI/FFTSize=FFT 大小:"
"$$$/FFTFilterUI/Linear=线性"
"$$$/FFTFilterUI/Logarithmic=对数"
"$$$/FFTFilterUI/SplineCurves=样条曲线"
"$$$/FFTFilterUI/Window=窗口:"
"$$$/FaderPortPlugin/Cancel=Cancel"
"$$$/FaderPortPlugin/MIDIInputDevice=MIDI Input Device:"
"$$$/FaderPortPlugin/MIDIOutputDevice=MIDI Output Device:"
"$$$/FaderPortPlugin/OK=OK"
"$$$/FilePropertiesXML/Space=Space:"
"$$$/FilesPanelXML/AutoPlayTooltip=Auto-Play"
"$$$/FilesPanelXML/CloseSelectedFilesTooltip=关闭已选中文件"
"$$$/FilesPanelXML/InsertIntoMultitrackTooltip=插入到多轨合成中"
"$$$/FilesPanelXML/LoopPlaybackTooltip=循环回放"
"$$$/FilesPanelXML/NewFileTooltip=新建文件"
"$$$/FilesPanelXML/PlayTooltip=播放"
"$$$/FlangerUI/Characteristics=特性"
"$$$/FlangerUI/Dry=干声"
"$$$/FlangerUI/Feedback=回授:"
"$$$/FlangerUI/FinalDelay=最终延迟时间:"
"$$$/FlangerUI/InitialDelay=初始延迟时间:"
"$$$/FlangerUI/Inverted=反转"
"$$$/FlangerUI/Mix=混合"
"$$$/FlangerUI/Mode=模式"
"$$$/FlangerUI/ModulationRate=调制速率:"
"$$$/FlangerUI/Sinusoida=正弦曲线"
"$$$/FlangerUI/SpecialEffects=特殊效果"
"$$$/FlangerUI/StereoPhase=立体声相位:"
"$$$/FlangerUI/Wet=湿声"
"$$$/FreqAnalGeneralTabXML/OveralFrequency=所有频率:"
"$$$/FreqAnalGeneralTabXML/OverallMusicalNote=所有音符:"
"$$$/FreqAnalGeneralTabXML/ValueAt=@0 Hz 值:"
"$$$/FreqAnalHistogramTabXML/0dBReference=0 dB 参考:"
"$$$/FreqAnalHistogramTabXML/0dBReferenceUnits=dBFS"
"$$$/FreqAnalHistogramTabXML/CopyGraphButtonTT=复制所有曲线图数据"
"$$$/FreqAnalHistogramTabXML/Display=显示:"
"$$$/FreqAnalHistogramTabXML/FFTSize=FFT 大小:"
"$$$/FreqAnalHistogramTabXML/Hold=Hold:"
"$$$/FreqAnalHistogramTabXML/Hold1=1"
"$$$/FreqAnalHistogramTabXML/Hold2=2"
"$$$/FreqAnalHistogramTabXML/Hold3=3"
"$$$/FreqAnalHistogramTabXML/Hold4=4"
"$$$/FreqAnalHistogramTabXML/Hold5=5"
"$$$/FreqAnalHistogramTabXML/Hold6=6"
"$$$/FreqAnalHistogramTabXML/Hold7=7"
"$$$/FreqAnalHistogramTabXML/Hold8=8"
"$$$/FreqAnalHistogramTabXML/Scale=缩放:"
"$$$/FreqAnalHistogramTabXML/TopChannel=顶部通道:"
"$$$/FreqAnalHistogramTabXML/Window=窗口:"
"$$$/FrequencyAnalysisPanel/ColumnName=\t@0"
"$$$/FrequencyAnalysisPanel/CopyAllGraphData=Freq@0@1@2"
"$$$/FrequencyAnalysisPanel/CopyAllTableData=@0@1@2"
"$$$/FrequencyAnalysisPanel/CursorStatus=光标: @0 Hz, L = @1 dB   频率: L = @2 Hz, @3"
"$$$/FrequencyAnalysisPanel/LiveCTI=实时时间指示器"
"$$$/FrequencyAnalysisPanel/Row0Label=@0 Hz 值:"
"$$$/FrequencyAnalysisPanel/Row0LabelZero=0 Hz 值:"
"$$$/FrequencyAnalysisPanel/Row1Label=所有频率:"
"$$$/FrequencyAnalysisPanel/Row2Label=所有音符:"
"$$$/FrequencyAnalysisPanel/RowData=@0\t@1@2"
"$$$/FrequencyAnalysisPanel/Scan=扫描"
"$$$/FrequencyAnalysisPanel/ScanSelection=扫描选区"
"$$$/FrequencyAnalysisPanel/ScannedSelection=已扫描选区"
"$$$/FrequencyAnalysisPanel/cellDB=@0 dB"
"$$$/FrequencyAnalysisPanel/cellHz=@0 Hz"
"$$$/FrequencyAnalysisPanelXML/Advanced=高级"
"$$$/FrequencyAnalysisPanelXML/Area=区域"
"$$$/FrequencyAnalysisPanelXML/Bars=栏"
"$$$/FrequencyAnalysisPanelXML/Blackmann=Blackmann"
"$$$/FrequencyAnalysisPanelXML/BlackmannHarris=Blackmann-Harris"
"$$$/FrequencyAnalysisPanelXML/Hamming=Hamming"
"$$$/FrequencyAnalysisPanelXML/Hann=Hann"
"$$$/FrequencyAnalysisPanelXML/Kaiser140=Kaiser (140 dB)"
"$$$/FrequencyAnalysisPanelXML/Kaiser180=Kaiser (180 dB)"
"$$$/FrequencyAnalysisPanelXML/Linear=线性"
"$$$/FrequencyAnalysisPanelXML/Lines=线"
"$$$/FrequencyAnalysisPanelXML/Logarithmic=对数"
"$$$/FrequencyAnalysisPanelXML/ScanSelection=扫描选区"
"$$$/FrequencyAnalysisPanelXML/Triangular=三角形"
"$$$/FrequencyAnalysisPanelXML/Welch=Welch"
"$$$/FrontEnd/BatchProcessPanelXML/Undo=撤销"
"$$$/FrontEnd/BatchProcessTaskXML/Run=运行"
"$$$/FullAReverb/GraphLabel/H=H"
"$$$/FullReverb/GraphLabel/L=L"
"$$$/FullReverbUI/Band=频段"
"$$$/FullReverbUI/BasedOnRoomSize=基于房间大小设置混响"
"$$$/FullReverbUI/Coloration=着色"
"$$$/FullReverbUI/Decay=       衰减:"
"$$$/FullReverbUI/DecayTime=衰减时间:"
"$$$/FullReverbUI/Diffusion=漫射:"
"$$$/FullReverbUI/Dimension=宽广度:"
"$$$/FullReverbUI/Dry=干声    "
"$$$/FullReverbUI/Frequency=频率"
"$$$/FullReverbUI/Gain=增益"
"$$$/FullReverbUI/HighPass=高通频率切除:"
"$$$/FullReverbUI/HighText=     H"
"$$$/FullReverbUI/IncludeDirect=包括直通"
"$$$/FullReverbUI/Location=左/右位置:"
"$$$/FullReverbUI/LowText=    L"
"$$$/FullReverbUI/OutputLevel=输出电平"
"$$$/FullReverbUI/Perception=感知:"
"$$$/FullReverbUI/PreDelay=预延迟时间:"
"$$$/FullReverbUI/ReverbSettings=混响设置"
"$$$/FullReverbUI/Reverberation=混响"
"$$$/FullReverbUI/RoomDimensions=实际房间大小:"
"$$$/FullReverbUI/RoomSize=房间大小:"
"$$$/FullReverbUI/Sum=总输入"
"$$$/FullReverbUI/Wet=混响"
"$$$/FullReverbUI/WetEarlyReflections=早反射"
"$$$/FullReverbUI/WidthDepth=宽度/深度"
"$$$/FullReverbUI/earlyReflections=早反射"
"$$$/GeneralPrefs/DefaultFadeTypeTooltipMac=在拖动一个淡化效果到临时切换类型时按住 Cmd 键"
"$$$/GeneralPrefs/DefaultFadeTypeTooltipWin=在拖动一个淡化效果到临时切换类型时按住 Ctrl 键"
"$$$/GeneralPrefs/ExtendSelectionMac=扩展选择（关联菜单按住 Cmd 键）"
"$$$/GeneralPrefs/ExtendSelectionWin=扩展选择（关联菜单按住 Ctrl 键）"
"$$$/GeneralPrefsXML/BrushClickOptions=频谱圆形笔点击"
"$$$/GeneralPrefsXML/ChannelEditing=允许相关的声道编辑"
"$$$/GeneralPrefsXML/ChannelEditingTT=在工作于立体声文件时允许通过鼠标选择左或右声道"
"$$$/GeneralPrefsXML/ContextMenu=关联菜单（使用 Shift 键 + 单击可扩展选择）"
"$$$/GeneralPrefsXML/CosText=余弦（S 曲线）"
"$$$/GeneralPrefsXML/CosTypeTT=设置默认淡化曲线为余弦"
"$$$/GeneralPrefsXML/DefaultFadeType=默认淡化曲线类型"
"$$$/GeneralPrefsXML/DefaultFadeTypeTooltipWinOrMacMAX=在拖动一个淡化效果到临时切换类型时按住 Ctrl 键"
"$$$/GeneralPrefsXML/DoubleSpeed=倍速"
"$$$/GeneralPrefsXML/EditAddedEffectsInRack=在添加效果到效果架时打开效果设置窗口"
"$$$/GeneralPrefsXML/EditAddedEffectsInRackTT=决定在每个效果添加到效果架时效果设置窗口是否打开"
"$$$/GeneralPrefsXML/EditorPanelContextClicking=编辑器面板关联点击"
"$$$/GeneralPrefsXML/EditorPanelContextClickingExtendSelTT=设置关联点击在编辑器面板扩展当前选择中的默认行为"
"$$$/GeneralPrefsXML/EditorPanelContextClickingTT=设置关键点击在编辑器面板中显示关联菜单的默认行为"
"$$$/GeneralPrefsXML/General=常规"
"$$$/GeneralPrefsXML/HalfSpeed=半速"
"$$$/GeneralPrefsXML/LogText=线性 / 对数"
"$$$/GeneralPrefsXML/LogTypeTT=设置默认淡化类型为线性/对数"
"$$$/GeneralPrefsXML/MakeCircle=鼠标按下时创建一个圆形选区"
"$$$/GeneralPrefsXML/MakeCircleTT=使用这个选项就象 Photoshop 一样，可以立即创建一个圆形选区"
"$$$/GeneralPrefsXML/NormalSpeed=常速"
"$$$/GeneralPrefsXML/PlaceCTI=鼠标按下放置时间指示器（按住不放可创建圆形选区）"
"$$$/GeneralPrefsXML/PlaceCTITT=使用这个选项可以让时间指示器通过快速点击进行放置，然而如果您继续按住鼠标不放可创建圆形选区"
"$$$/GeneralPrefsXML/ResetAllWarningDialogs=重置所有警告对话框"
"$$$/GeneralPrefsXML/ResetAllWarningDialogsTT=通过点击“不再显示”将不再出现已隐藏的全部警告对话框"
"$$$/GeneralPrefsXML/ResetWarningDialogsPrompt=通过选中「不再显示」，所有警告对话框可被禁用，将在下次使用时被激活并显示。您是否要继续？"
"$$$/GeneralPrefsXML/RestoreWhenOpeningSessionTT=决定在打开合成项目时效果设置窗口是否保持可见"
"$$$/GeneralPrefsXML/RestoreWhenOpeningSessions=在打开合成项目时恢复打开效果设置窗口\t"
"$$$/GeneralPrefsXML/RestoreWhenSwitchingFiles=在切换文件时恢复打开效果设置窗口\t"
"$$$/GeneralPrefsXML/RestoreWhenSwitchingFilesTT=决定在切换文件时效果设置窗口是否保持可见"
"$$$/GeneralPrefsXML/ShowHUDSel=仅显示选中范围的 HUD"
"$$$/GeneralPrefsXML/ShowHUDSelTT=决定在所有时间或仅在一个当前选择范围时 HUD 是否显示"
"$$$/GeneralPrefsXML/SyncSelectionViewCTI=在波形编辑器中跨文件同步选区，缩放级别，以及光标指示器"
"$$$/GeneralPrefsXML/ZoomFactor=缩放系数（时间）:"
"$$$/GeneralPrefsXML/ZoomFactorTT=在时间比例中缩放时决定鼠标滚轮的灵敏度"
"$$$/GraphicPhaseShifter/AllChannels=All"
"$$$/GraphicPhaseShifter/BothChannels=Both"
"$$$/GraphicPhaseShifter/FrequencyScale=Frequency Scale (Horizontal Axis):"
"$$$/GraphicPhaseShifter/GraphicPhaseShifterGraph/Frequency=Frequency:"
"$$$/GraphicPhaseShifter/GraphicPhaseShifterGraph/Hz=Hz"
"$$$/GraphicPhaseShifter/GraphicPhaseShifterGraph/Phase=Phase:"
"$$$/GraphicPhaseShifter/GraphicPhaseShifterGraph/deg=°"
"$$$/GraphicPhaseShifter/GraphicPhaseShifterGraph/deg180=180°"
"$$$/GraphicPhaseShifter/GraphicPhaseShifterGraph/deg360=360°"
"$$$/GraphicPhaseShifter/GraphicPhaseShifterGraph/minusdeg180=-180°"
"$$$/GraphicPhaseShifter/GraphicPhaseShifterGraph/minusdeg360=-360°"
"$$$/GraphicPhaseShifterUI/Channel=Channel:"
"$$$/GraphicPhaseShifterUI/FFTSize=FFT Size:"
"$$$/GraphicPhaseShifterUI/Linear=Linear"
"$$$/GraphicPhaseShifterUI/Log=Logarithmic"
"$$$/GraphicPhaseShifterUI/Range180=180°"
"$$$/GraphicPhaseShifterUI/Range360=360°"
"$$$/GraphicPhaseShifterUI/SplineCurves=Spline Curves"
"$$$/GraphicPhaseShifterUI/VerticalRange=Range (Vertical Axis):"
"$$$/HardLimit/InputBoost=输入增强:"
"$$$/HardLimit/LinkChannels=链接声道"
"$$$/HardLimit/LookaheadTime=预测时间:"
"$$$/HardLimit/MaximumAmplitude=最大振幅:"
"$$$/HardLimit/ReleaseTime=释放时间:"
"$$$/HardwarePrefsXML/AudioDeviceSettings=设置..."
"$$$/HardwarePrefsXML/AudioHardware=音频硬件"
"$$$/HardwarePrefsXML/ClockSource=时钟源:"
"$$$/HardwarePrefsXML/DefaultInput=默认输入:"
"$$$/HardwarePrefsXML/DefaultOutput=默认输出:"
"$$$/HardwarePrefsXML/Device=设备:"
"$$$/HardwarePrefsXML/DeviceClass=设备类型:"
"$$$/HardwarePrefsXML/DeviceClassTT=指定驱动型号用于访问音频硬件"
"$$$/HardwarePrefsXML/Hz=Hz"
"$$$/HardwarePrefsXML/IOBufferSize=I/O 缓存大小:"
"$$$/HardwarePrefsXML/Latency=等待时间:"
"$$$/HardwarePrefsXML/MasterDevice=主控时钟:"
"$$$/HardwarePrefsXML/ReleaseASIODriverInBackground=在后台释放 ASIO 驱动"
"$$$/HardwarePrefsXML/SampleRate=采样率:"
"$$$/HardwarePrefsXML/Samples=采样"
"$$$/HardwarePrefsXML/UseMachineSpecific=使用系统指定默认硬件"
"$$$/HardwarePrefsXML/UseMachineSpecificTT=Override user-level device preferences with machine-specific defaults on launch"
"$$$/HardwarePrefsXML/ms=毫秒"
"$$$/HistoryPanelXML/DeleteActionTooltip=删除当前状态"
"$$$/IntraClipUI/Advanced=高级"
"$$$/IntraClipUI/Compressor=压缩"
"$$$/IntraClipUI/LevelingAmount=电平值:"
"$$$/IntraClipUI/MoreBoost=增强较低信号"
"$$$/IntraClipUI/MoreBoostToolTip=增加长信号的触发/释放时间。在此设置被启用时，较短的信号将减少触发/释放时间。"
"$$$/IntraClipUI/NoiseGate=噪声门"
"$$$/IntraClipUI/NoiseOffset=噪声偏移:"
"$$$/IntraClipUI/TargetVolumeLevel=目标音量电平:"
"$$$/IntraClipUI/Threshold=阈值:"
"$$$/MMEPrefsXML/InputDevice=设置默认输入设备"
"$$$/MMEPrefsXML/Latency=设置延迟"
"$$$/MMEPrefsXML/MasterClock=设置主控时钟设备"
"$$$/MMEPrefsXML/OutputDevice=设置默认输出设备"
"$$$/MMEPrefsXML/SampleRate=设置输入与输出的采样率"
"$$$/MackieConfigDialog/Add=Add"
"$$$/MackieConfigDialog/Cancel=Cancel"
"$$$/MackieConfigDialog/Edit=Edit"
"$$$/MackieConfigDialog/OK=OK"
"$$$/MackieConfigDialog/Remove=Remove"
"$$$/MackieMIDIConfig/Cancel=Cancel"
"$$$/MackieMIDIConfig/DeviceType=Device Type:"
"$$$/MackieMIDIConfig/MIDIInputDevice=MIDI Input Device:"
"$$$/MackieMIDIConfig/MIDIOutputDevice=MIDI Output Device:"
"$$$/MackieMIDIConfig/OK=OK"
"$$$/MarkersPanelXML/DeleteSelectedMarkersTT=删除选中标记"
"$$$/MarkersPanelXML/ExportMarkersTT=导出选中范围标记的音频为分离文件"
"$$$/MarkersPanelXML/InsertIntoPlaylistTT=插入选中范围标记到播放列表"
"$$$/MarkersPanelXML/MergeSelectedMarkersTT=合并选中标记"
"$$$/MarkersPanelXML/ShowAllFilesMarkersTT=Show markers of all files"
"$$$/MatchClipVolumeDialogXML/ITULoudness=ITU-R BS.1770-2 Loudness"
"$$$/MatchClipVolumeDialogXML/Loudness=响度"
"$$$/MatchClipVolumeDialogXML/MatchTo=匹配素材音量到:"
"$$$/MatchClipVolumeDialogXML/PeakAmplitude=峰值振幅"
"$$$/MatchClipVolumeDialogXML/PerceivedLoudness=感知响度"
"$$$/MatchClipVolumeDialogXML/TargetVol=目标音量:"
"$$$/MatchClipVolumeDialogXML/TotalRMSAmplitude=总体 RMS 振幅"
"$$$/MatchClipVolumeDialogXML/TruePeakAmplitude=准确峰值振幅"
"$$$/MatchClipVolumeDialogXML/dB=dB"
"$$$/MatchToVolumeSettingsViewXML/Loudness=响度:"
"$$$/MatchVolumeSettingsXML/File=文件（总体 RMS）"
"$$$/MatchVolumeSettingsXML/ITULoudness=ITU-R BS.1770-2 Loudness"
"$$$/MatchVolumeSettingsXML/Loudness=响度"
"$$$/MatchVolumeSettingsXML/MatchTo=匹配到:"
"$$$/MatchVolumeSettingsXML/PeakAmplitude=峰值振幅"
"$$$/MatchVolumeSettingsXML/PerceivedLoudness=感知响度"
"$$$/MatchVolumeSettingsXML/TotalRMS=总体 RMS"
"$$$/MatchVolumeSettingsXML/TruePeakAmplitude=准确峰值振幅"
"$$$/MatchVolumeTaskView/DragAndDropFilesHere=从文件面板拖放文件"
"$$$/MatchVolumeTaskXML/AnalyzeFilesTT=为每个文件匹配计算平均值，感知平均值，以及峰值"
"$$$/MatchVolumeTaskXML/SettingsButton=匹配音量设置"
"$$$/MediaBrowserXML/AutoPlayTT=自动播放"
"$$$/MediaBrowserXML/BackTT=返回"
"$$$/MediaBrowserXML/FilterContentsTT=过滤内容"
"$$$/MediaBrowserXML/LocationsTT=位置"
"$$$/MediaBrowserXML/LoopPlaybackTT=循环回放"
"$$$/MediaBrowserXML/PlayTT=播放"
"$$$/MediaBrowserXML/ShortcutsPopupButtonTT=添加（移除）快捷方式"
"$$$/MediaBrowserXML/WaitTT=媒体浏览器正在收集信息。完成前视图可能不完整。"
"$$$/MediaCacheDialogXML/MediaAndDiskCache=媒体与磁盘缓存"
"$$$/MediaCachePrefsXML/Browse=浏览..."
"$$$/MediaCachePrefsXML/DiskCache=缓存"
"$$$/MediaCachePrefsXML/DlmsEnableTT=Determines whether or not we use the Dynamic Link Media Server to import common file types supported by Premiere Pro"
"$$$/MediaCachePrefsXML/DlmsPreviewInMediaBrowser=Enable DLMS Preview in the Media Browser (may be slower)"
"$$$/MediaCachePrefsXML/DlmsPreviewInMediaBrowserTT=Determines whether or not we populate file information or allow preview for files imported into Audition through the use of the Dynamic Link Media Server. Enabling this option could cause browsing in the Media Browser to become slower."
"$$$/MediaCachePrefsXML/DynamicLinkMedia=Dynamic Link Media"
"$$$/MediaCachePrefsXML/EnableDlms=Enable DLMS Format Support"
"$$$/MediaCachePrefsXML/OpenGLDisplay=Use OpenGL for displaying video"
"$$$/MediaCachePrefsXML/OpenGLDisplayTT=Determines whether the video panel uses OpenGL for accelerated video display.  Enabling this option requires properly configured display drivers, otherwise video playback performance will be poor."
"$$$/MediaCachePrefsXML/PrimaryTemp=主临时文件:"
"$$$/MediaCachePrefsXML/PrimaryTempTT=设置主临时文件夹"
"$$$/MediaCachePrefsXML/SavePeakFiles=保存峰值文件"
"$$$/MediaCachePrefsXML/SavePeakFilesTT=决定是否在打开 WAV 文件时存储峰值 (.pkf) 文件"
"$$$/MediaCachePrefsXML/SecondaryTemp=次临时文件:"
"$$$/MediaCachePrefsXML/SecondaryTempTT=设置次临时文件夹"
"$$$/MediaCachePrefsXML/SessionTemplates=项目模板"
"$$$/MediaCachePrefsXML/TempPathDoesNotExist=已指定的临时文件夹不存在。选择其他文件夹或使用默认的系统临时文件夹。"
"$$$/MediaCachePrefsXML/TempPathsWarning=分配次临时文件夹到不同于首选位置的物理硬盘驱动器，可以在某些任务中提高性能。"
"$$$/MediaCachePrefsXML/TemplatesLocation=模板位置:"
"$$$/MediaCachePrefsXML/TemplatesPathDoesNotExist=已指定的模板文件夹不存在。选择其他文件夹或使用默认的项目模板文件夹。"
"$$$/MetadataDisplayDialogXML/Cancel=取消"
"$$$/MetadataDisplayDialogXML/OK=确定"
"$$$/MetadataPanel/BWF=BWF"
"$$$/MetadataPanel/CART=CART"
"$$$/MetadataPanel/ID3=ID3"
"$$$/MetadataPanel/RIFF=RIFF"
"$$$/MetadataPanel/XMP=XMP"
"$$$/MetadataPrefsXML/AddMarkersToHistory=添加标记更改到撤销历史记录"
"$$$/MetadataPrefsXML/AddMarkersToHistoryTooltip=决定在撤销历史或忽略中是否保存更改的标记"
"$$$/MetadataPrefsXML/EmbedEditOriginalInMixdown=嵌入编辑原始链接数据在多轨缩混中"
"$$$/MetadataPrefsXML/EmbedEditOriginalInMixdownTooltip=决定是否在缩混时编辑嵌入文件中的原始数据"
"$$$/MetadataPrefsXML/FilesPanel=文件面板..."
"$$$/MetadataPrefsXML/FilesPanelTT=在文件与元数据面板中，使用元数据显示对话框来定制所显示区域"
"$$$/MetadataPrefsXML/IncludeMarkersInCutCopy=在执行剪切或复制时包含标记"
"$$$/MetadataPrefsXML/IncludeMarkersInCutCopyTooltip=执行剪切或复制时确定是否包含或忽略选择范围内的标记定位"
"$$$/MetadataPrefsXML/IncludeMarkersInMixdown=在录制于多轨缩混中包含标记与元数据"
"$$$/MetadataPrefsXML/IncludeMarkersInMixdownTooltip=在录制，缩混或内部缩混时确定是否嵌入标记和元数据到文件中"
"$$$/MetadataPrefsXML/IncludeSourceMetadataOnSaveAs=在默认另存为时包含标记与元数据"
"$$$/MetadataPrefsXML/IncludeSourceMetadataOnSaveAsTT=确定在另存为中“包含标记与其他元数据”复选框的默认状态"
"$$$/MetadataPrefsXML/LockMarkersToTimeline=锁定标记与元数据到时间线"
"$$$/MetadataPrefsXML/LockMarkersToTimelineTooltip=在编辑时是否确定标记与 BWF 时间参考元数据在时间中变换或保持锁定"
"$$$/MetadataPrefsXML/Metadata=标记与元数据"
"$$$/MetadataPrefsXML/MetadataDisplay=元数据显示:"
"$$$/MetadataPrefsXML/MetadataPanel=元数据面板..."
"$$$/MetadataPrefsXML/MetadataPanelTT=在文件与元数据面板中，使用元数据对话框来定制所显示区域"
"$$$/MetadataPrefsXML/ShowMarkerLines=在编辑面板中显示标记行"
"$$$/MetadataPrefsXML/ShowMarkerLinesTooltip=确定在编辑器面板内是否在标记下面显示垂直虚线"
"$$$/MixPaste/Cancel=取消"
"$$$/MixPaste/CopiedAudio=已复制的音频:"
"$$$/MixPaste/Crossfade=淡化"
"$$$/MixPaste/ExistingAudio=现有音频:"
"$$$/MixPaste/InvertCopiedAudio=反转已复制的音频"
"$$$/MixPaste/Modulate=调制"
"$$$/MixPaste/OK=确定"
"$$$/MixPaste/Volume=音量"
"$$$/MixPaste/milliseconds=毫秒"
"$$$/Multitrack/AutomationTrackControls/AddRemoveKeyframe=添加/移除关键帧"
"$$$/Multitrack/AutomationTrackControls/ClearAllKeyframes=清除所有关键帧"
"$$$/Multitrack/AutomationTrackControls/NextKeyframe=下一关键帧"
"$$$/Multitrack/AutomationTrackControls/PreviousKeyframe=上一关键帧"
"$$$/Multitrack/AutomationTrackControls/SafeDuringWrite=Protect the parameter from being written to when recording automation"
"$$$/Multitrack/AutomationTrackControls/Select=选择:"
"$$$/Multitrack/EQTrackControls/EQ=EQ..."
"$$$/Multitrack/EQTrackControls/ShowEQUI=显示 EQ 编辑窗口"
"$$$/Multitrack/InputTrackControlsView/51=5.1"
"$$$/Multitrack/InputTrackControlsView/AudioHardware=音频硬件..."
"$$$/Multitrack/InputTrackControlsView/Default=默认"
"$$$/Multitrack/InputTrackControlsView/Mono=单声道"
"$$$/Multitrack/InputTrackControlsView/PhaseFlipTT=极性反向"
"$$$/Multitrack/InputTrackControlsView/Stereo=立体声"
"$$$/Multitrack/OutputTrackControlsView/51=5.1"
"$$$/Multitrack/OutputTrackControlsView/AudioHardware=音频硬件..."
"$$$/Multitrack/OutputTrackControlsView/Default=默认"
"$$$/Multitrack/OutputTrackControlsView/Mono=单声道"
"$$$/Multitrack/OutputTrackControlsView/Stereo=立体声"
"$$$/Multitrack/SideChainPopup/51=5.1"
"$$$/Multitrack/SideChainPopup/Mono=单声道"
"$$$/Multitrack/SideChainPopup/None=无"
"$$$/Multitrack/SideChainPopup/Stereo=立体声"
"$$$/Multitrack/SuroundPannerPanel/NoneTrackName=无"
"$$$/Multitrack/TrackControls/ArmForRecord=录制准备"
"$$$/Multitrack/TrackControls/FXPreFaderPostFaderTooltip=FX 预衰减/后衰减"
"$$$/Multitrack/TrackControls/FXPreFaderPreRenderTooltip=预渲染声轨"
"$$$/Multitrack/TrackControls/Input=输入: "
"$$$/Multitrack/TrackControls/InputMonitoring=监视输入"
"$$$/Multitrack/TrackControls/Mute=静音"
"$$$/Multitrack/TrackControls/Output=输出: "
"$$$/Multitrack/TrackControls/PanSumToMonoTooltip=合并为单声道"
"$$$/Multitrack/TrackControls/PowerAllEffectsTooltip=切换所有效果的开关状态"
"$$$/Multitrack/TrackControls/Solo=独奏"
"$$$/Multitrack/TrackInput/None=无"
"$$$/Multitrack/TrackNameEdit/TrackTitle=声轨标题: "
"$$$/Multitrack/TrackSend/51=5.1"
"$$$/Multitrack/TrackSend/AddBus=添加总线声轨"
"$$$/Multitrack/TrackSend/CreateSideChain=创建"
"$$$/Multitrack/TrackSend/Mono=单声道"
"$$$/Multitrack/TrackSend/None=无"
"$$$/Multitrack/TrackSend/Send=发送: "
"$$$/Multitrack/TrackSend/SendPreFaderPostFaderTooltip=发送预衰减/后衰减"
"$$$/Multitrack/TrackSend/SideChain=侧链"
"$$$/Multitrack/TrackSend/SideChainName=@0 (@1 - Slot @2)"
"$$$/Multitrack/TrackSend/SideChainSourceName=@0 - Slot @1"
"$$$/Multitrack/TrackSend/Stereo=立体声"
"$$$/Multitrack/Trackoutput/AddBus=添加总线声轨"
"$$$/Multitrack/Trackoutput/Bus=总线声轨"
"$$$/Multitrack/Trackoutput/None=无"
"$$$/MultitrackDocument/TrackAutomationRipple=TrackAutomationRipple"
"$$$/MultitrackPrefs/AutomatchOptimizations=关键帧自动化 - 自动优化"
"$$$/MultitrackPrefs/AutomatchTime=自动化时间:"
"$$$/MultitrackPrefs/ControlSurface=控制界面"
"$$$/MultitrackPrefs/DefaultStartTime=默认开始时间:"
"$$$/MultitrackPrefs/DefaultStartTimeTT=确定新建多轨项目的开始时间"
"$$$/MultitrackPrefs/Exclusive=独占"
"$$$/MultitrackPrefs/ExclusiveSoloTooltip_MAC=设置专用的声轨独奏操作，以使每次只有一轨独奏（按住 Cmd 键可忽略）"
"$$$/MultitrackPrefs/ExclusiveSoloTooltip_WIN=设置专用的声轨独奏操作，以使每次只有一轨独奏（按住 Ctrl 键可忽略）"
"$$$/MultitrackPrefs/LeftRightCut=左/右切除（对数）"
"$$$/MultitrackPrefs/LinearEditPointThinning=Linear Edit Point Thinning"
"$$$/MultitrackPrefs/MinimumTime=Minimum Time:"
"$$$/MultitrackPrefs/MinimumTimeIntervalThinning=Minimum Time Interval Thinning"
"$$$/MultitrackPrefs/Multitrack=多轨合成"
"$$$/MultitrackPrefs/NonExclusive=非独占"
"$$$/MultitrackPrefs/NonExclusiveSoloTooltip_MAC=设置非专用的声轨独奏操作，允许多声轨在某些时间独奏（按住 Cmd 键可忽略）"
"$$$/MultitrackPrefs/NonExclusiveSoloTooltip_WIN=设置非专用的声轨独奏操作，允许多声轨在某些时间独奏（按住 Ctrl 键可忽略）"
"$$$/MultitrackPrefs/PanningMode=声相模式:"
"$$$/MultitrackPrefs/Seconds=秒"
"$$$/MultitrackPrefs/TrackSolo=声轨独奏:"
"$$$/MultitrackPrefs/dBCenter=dB 居中"
"$$$/MultitrackPrefs/ms=毫秒"
"$$$/MultitrackPrefsXML/AdjustKeyframesRipple=在执行波纹编辑时调节声轨关键帧"
"$$$/MultitrackPrefsXML/AdjustKeyframesRippleTT=决定是否让素材或时间波纹影响声轨关键帧"
"$$$/MultitrackPrefsXML/AdjustTrackKeyframes=在执行波纹编辑时调节声轨关键帧"
"$$$/MultitrackPrefsXML/AdjustTrackKeyframesTT=决定是否让素材或时间波纹影响声轨关键帧"
"$$$/MultitrackPrefsXML/AutoCrossfade=自动淡化叠加素材"
"$$$/MultitrackPrefsXML/AutoCrossfadeTT=决定是否让叠加素材自动创建淡化效果"
"$$$/MultitrackPrefsXML/AutoSaveSession=自动保存恢复数据的时间间隔"
"$$$/MultitrackPrefsXML/AutoSaveTT=设置多轨合成项目自动存储间隔时间"
"$$$/MultitrackPrefsXML/EnableInputMeteringTT=在声轨准备录制时，决定是否自动激活输入表"
"$$$/MultitrackPrefsXML/EqualPowerPanningModeTT=决定是否通过使用均等功率与声道多少之间调整声相"
"$$$/MultitrackPrefsXML/InputMetering=在准备录制时激活输入表"
"$$$/MultitrackPrefsXML/LogPanningModeTT=决定是否通过减少对应声道的音量调整声相"
"$$$/MultitrackPrefsXML/MinutesLabel= 分"
"$$$/MultitrackPrefsXML/PlayHiddenClips=Play overlapped portions of clips"
"$$$/MultitrackPrefsXML/PlayHiddenClipsTT=Toggles whether overlapped clips are audible when no crossfade exists"
"$$$/MultitrackPrefsXML/PlayLoopToEndOfClips=循环播放期间，循环于最后一段素材的末端"
"$$$/MultitrackPrefsXML/PlayLoopToEndOfClipsTT=决定在循环播放开启时，循环是否重复于最后素材的末端，或多轨项目的末端"
"$$$/MultitrackPrefsXML/RefAll=Reference all open audio and video files when saving sessions"
"$$$/MultitrackPrefsXML/RefAllTT=When this option is on we will retain all files in the files panel when saving multitrack sessions."
"$$$/MultitrackPrefsXML/SyncEV=同步素材与波形编辑器"
"$$$/MultitrackPrefsXML/SyncEVTT=决定在波形编辑器中编辑素材时，多轨项目的时间指示器的位置，缩放级别，选区范围是否继续存在。"
"$$$/MultitrackPrefsXML/UseTimecodeForInsert=在插入素材到多轨合成时使用嵌入时间码"
"$$$/MultitrackPrefsXML/UseTimecodeForInsertTT=决定在素材插入到多轨项目中时，BWF 或 XMP 时间码信息是否自动放置到素材"
"$$$/NewFileDialogXML/LocationWarning=The preferred location for session templates could not be located. Please consult your preferences and/or media."
"$$$/NewSessionDialogXML/DeleteSelectedTemplate=Delete Selected Template"
"$$$/Normalizers/DegreeSymbol=°"
"$$$/NotchFilter/NotchFilterGraph/Hz=Hz"
"$$$/NotchFilter/NotchFilterGraph/dB=dB"
"$$$/NotchFilterUI/Enable=Enable"
"$$$/NotchFilterUI/FixGainTo=Fix Gain to:"
"$$$/NotchFilterUI/Frequency=Frequency"
"$$$/NotchFilterUI/Gain=Gain"
"$$$/NotchFilterUI/Narrow=Narrow"
"$$$/NotchFilterUI/NotchWidth=Notch Width:"
"$$$/NotchFilterUI/SuperNarrow=Super Narrow"
"$$$/NotchFilterUI/UltraQuiet=Ultra Quiet"
"$$$/NotchFilterUI/VeryNarrow=Very Narrow"
"$$$/OMFExportDialog/AIFF=AIFF"
"$$$/OMFExportDialog/Encapsulated=封装"
"$$$/OMFExportDialog/OMFSettings=OMF 设置"
"$$$/OMFExportDialog/Referenced=参考"
"$$$/OMFExportDialog/SampleTypeSummary1=媒体: @0\n媒体格式: @1\n@2"
"$$$/OMFExportDialog/SampleTypeSummary2=媒体: @0\n媒体格式: @1\n@2\n处理: @3"
"$$$/OMFExportDialog/TrimAudioFiles=修剪音频文件"
"$$$/OMFExportDialog/UseEntireFile=使用完整文件"
"$$$/OMFExportDialog/WAV=WAV"
"$$$/OMFExportDialogXML/CopyButtonTT=复制警告"
"$$$/OMFExportSettingsDialogXML/AIFF=音频交换文件格式 (*.aif)"
"$$$/OMFExportSettingsDialogXML/Encapsulated=封装"
"$$$/OMFExportSettingsDialogXML/HandleDuration=处理持续时间:"
"$$$/OMFExportSettingsDialogXML/Media=媒体:"
"$$$/OMFExportSettingsDialogXML/MediaFormat=媒体格式:"
"$$$/OMFExportSettingsDialogXML/MediaOptions=媒体选项:"
"$$$/OMFExportSettingsDialogXML/Referenced=参考"
"$$$/OMFExportSettingsDialogXML/TrimAudioFilesToClipLength=修剪音频文件为素材长度"
"$$$/OMFExportSettingsDialogXML/UseEntireFile=使用完整文件"
"$$$/OMFExportSettingsDialogXML/WAV=波形音频(*.wav)"
"$$$/OpeningFilesProgressDialog/Cancel=取消"
"$$$/OpeningFilesProgressDialog/OK=确定"
"$$$/OpeningFilesProgressDialogXML/AlertDetails=详细信息:"
"$$$/OpeningFilesProgressDialogXML/CopyButtonTT=复制所有文件警告/错误"
"$$$/OpeningFilesProgressDialogXML/LinkMedia=链接媒体..."
"$$$/OpeningFilesProgressDialogXML/Msg=在操作下列文件时有警告或错误产生:"
"$$$/OpeningFilesProgressDialogXML/OK=确定"
"$$$/OpeningFilesProgressDialogXML/ProcessingMsg=处理:"
"$$$/OpeningFilesProgressDialogXML/ProgressMsg=估计剩余时间:"
"$$$/OpeningFilesProgressDialogXML/ProgressPercentage=100%"
"$$$/OpeningFilesProgressDialogXML/WarningsErrors=警告/错误"
"$$$/Panels/HistoryPanel/Undo= 次撤销"
"$$$/Panels/HistoryPanel/UndoPlural= 次撤销"
"$$$/ParametricEQ/Band=频段"
"$$$/ParametricEQ/Constant=恒定:"
"$$$/ParametricEQ/ConstantWidth=宽度"
"$$$/ParametricEQ/EnableToggle/H=H"
"$$$/ParametricEQ/EnableToggle/HP=HP"
"$$$/ParametricEQ/EnableToggle/L=L"
"$$$/ParametricEQ/EnableToggle/LP=LP"
"$$$/ParametricEQ/Frequency=频率"
"$$$/ParametricEQ/Gain=增益"
"$$$/ParametricEQ/GraphLabel/H=H"
"$$$/ParametricEQ/GraphLabel/HP=HP"
"$$$/ParametricEQ/GraphLabel/L=L"
"$$$/ParametricEQ/GraphLabel/LP=LP"
"$$$/ParametricEQ/HPGainSlope1=6dB/Oct"
"$$$/ParametricEQ/HPGainSlope2=12dB/Oct"
"$$$/ParametricEQ/HPGainSlope3=18dB/Oct"
"$$$/ParametricEQ/HPGainSlope4=24dB/Oct"
"$$$/ParametricEQ/HPGainSlope5=30dB/Oct"
"$$$/ParametricEQ/HPGainSlope6=36dB/Oct"
"$$$/ParametricEQ/HPGainSlope7=48dB/Oct"
"$$$/ParametricEQ/LPGainSlope1=6dB/Oct"
"$$$/ParametricEQ/LPGainSlope2=12dB/Oct"
"$$$/ParametricEQ/LPGainSlope3=18dB/Oct"
"$$$/ParametricEQ/LPGainSlope4=24dB/Oct"
"$$$/ParametricEQ/LPGainSlope5=30dB/Oct"
"$$$/ParametricEQ/LPGainSlope6=36dB/Oct"
"$$$/ParametricEQ/LPGainSlope7=48dB/Oct"
"$$$/ParametricEQ/Range=范围:"
"$$$/ParametricEQ/UltraQuiet=超静音"
"$$$/ParametricEQ/Width=Q / 宽广度"
"$$$/ParametricEQ/masterGain=主控增益"
"$$$/PhaseAnalysisTabXML/Channel1=声道:"
"$$$/PhaseAnalysisTabXML/CompareTo=比较:"
"$$$/PlaybackPrefsXML/AutoScroll=在回放与录制期间自动滚屏"
"$$$/PlaybackPrefsXML/AutoScrollTT=决定在播放或录制期间，在时间指示器走完当前可见位置时是否进行视图滚屏。如果是手动调节，自动滚屏仅在指示器（CTI）进入视图时才会继续开始"
"$$$/PlaybackPrefsXML/JKLShuttleSpeed=JKL 穿梭速度:"
"$$$/PlaybackPrefsXML/Playback=回放"
"$$$/PlaybackPrefsXML/ReturnToStart=停止时指示器返回到开始位置"
"$$$/PlaybackPrefsXML/ReturnToStartTT=决定播放停止时的时间指示器的反应行为。"
"$$$/PlaybackPrefsXML/ScrollToStart=在回放停止后回滚到当前时间指示器"
"$$$/PlaybackPrefsXML/ScrollToStartTT=决定在播放停止时，视图是否滚动到时间指示器所在的位置。此选项仅用于“在回放与录制期间自动滚屏”和“停止时指示器返回到开始位置”均被启用时"
"$$$/PlaybackPrefsXML/ScrubArrowKeys=在经由键盘命令调节时间指示器位置时，音频摩擦出声"
"$$$/PlaybackPrefsXML/ScrubArrowKeysTT=决定在使用“移动指示器到左侧”和“移动指示器到右侧”命令时，音频是否擦刮出声。"
"$$$/PlaybackPrefsXML/SmoothScrollEV=在波形编辑器中居中自动滚屏"
"$$$/PlaybackPrefsXML/SmoothScrollEVTT=决定在波形编辑器内，时间指示器是否始终保持在视图滚动中央位置"
"$$$/PlaybackPrefsXML/SmoothScrollMT=在多轨编辑器中居中自动滚屏"
"$$$/PlaybackPrefsXML/SmoothScrollMTTT=决定在多轨编辑器内，时间指示器是否始终保持在视图滚动中央位置"
"$$$/PlaylistPanelXML/DeleteSelectedMarkersTT=从播放列表移除选中标记"
"$$$/PlaylistPanelXML/MoveDownTT=在播放列表中下移选中标记"
"$$$/PlaylistPanelXML/MoveUpTT=在播放列表中上移选中标记"
"$$$/PlaylistPanelXML/OpenMarkersPanelTT=打开标记面板，标记可被添加到播放列表"
"$$$/PlaylistPanelXML/PlayAllTT=播放标记排序起始于所选定的项目"
"$$$/PluginManager/Dialog/Add=添加..."
"$$$/PluginManager/Dialog/AvailablePlugins=可用插件:"
"$$$/PluginManager/Dialog/Cancel=取消"
"$$$/PluginManager/Dialog/Default=默认"
"$$$/PluginManager/Dialog/DisableAll=全部禁用"
"$$$/PluginManager/Dialog/EnableAll=全部启用"
"$$$/PluginManager/Dialog/Filter=过滤:"
"$$$/PluginManager/Dialog/OK=确定"
"$$$/PluginManager/Dialog/Remove=移除"
"$$$/PluginManager/Dialog/RescanExisting=重新扫描现有插件"
"$$$/PluginManager/Dialog/Scan=插件扫描"
"$$$/PluginManager/Dialog/SeparateProcess=分离处理"
"$$$/PluginManager/Dialog/VSTPluginFolders=VST 插件文件夹:"
"$$$/Popup/Item/BottomRight=下/右"
"$$$/Popup/Item/Center=中置"
"$$$/Popup/Item/Default=默认"
"$$$/Popup/Item/ExtractCustom=自定义"
"$$$/Popup/Item/High=高"
"$$$/Popup/Item/Low=低"
"$$$/Popup/Item/Medium=中"
"$$$/Popup/Item/Surround=环绕"
"$$$/Popup/Item/beats=节拍"
"$$$/Popup/Item/ms=毫秒"
"$$$/Popup/Item/samples=采样"
"$$$/PrefsXML/DefaultCDTrackPause=默认CD轨道间隔:"
"$$$/PrefsXML/DefaultPauseTT=Determines the default pause amount for new CD tracks in a CD Project"
"$$$/PremiereExportXML/Options=选项"
"$$$/PropertiesXML/Arranger=Arranger:"
"$$$/PropertiesXML/Artist=Artist:"
"$$$/PropertiesXML/Composer=Composer:"
"$$$/PropertiesXML/Genre=Genre:"
"$$$/PropertiesXML/GenreCode=Genre Code:"
"$$$/PropertiesXML/MediaCatalogNumberLabel=MCN:"
"$$$/PropertiesXML/MediaCatalogNumberTT=Media Catalog Number"
"$$$/PropertiesXML/Message=Message:"
"$$$/PropertiesXML/Songwriter=Songwriter:"
"$$$/PropertiesXML/Title=Title:"
"$$$/Properties_AudioClipXML/Info=Info"
"$$$/Properties_AudioFileXML/BitDepth=位深度:"
"$$$/Properties_AudioFileXML/Channels=声道:"
"$$$/Properties_AudioFileXML/Duration=持续时间:"
"$$$/Properties_AudioFileXML/FilePath=文件路径:"
"$$$/Properties_AudioFileXML/Format=格式:"
"$$$/Properties_AudioFileXML/Info=信息"
"$$$/Properties_AudioFileXML/SampleRate=采样率:"
"$$$/Properties_CDFileXML/CDText=CD文本"
"$$$/Properties_CDFileXML/Info=信息"
"$$$/Properties_ClipXML/ClipColor=素材颜色:"
"$$$/Properties_ClipXML/ClipDuration=素材持续时间:"
"$$$/Properties_ClipXML/ClipEndTime=素材结束时间:"
"$$$/Properties_ClipXML/ClipGain=素材增益:"
"$$$/Properties_ClipXML/ClipStartTime=素材开始时间:"
"$$$/Properties_ClipXML/Duration=持续时间:"
"$$$/Properties_ClipXML/FilePath=文件路径:"
"$$$/Properties_ClipXML/Format=格式:"
"$$$/Properties_ClipXML/GroupClips=素材编组"
"$$$/Properties_ClipXML/GroupColor=编组颜色:"
"$$$/Properties_ClipXML/LockInTime=锁定时间"
"$$$/Properties_ClipXML/Loop=循环"
"$$$/Properties_ClipXML/Mode=模式:"
"$$$/Properties_ClipXML/MultipleClips=已选中多条素材"
"$$$/Properties_ClipXML/Mute=静音"
"$$$/Properties_ClipXML/Pitch=Pitch:"
"$$$/Properties_ClipXML/PreserveFormants=Preserve Formants"
"$$$/Properties_ClipXML/ResetStretchButtonTT=Reset Stretch Properties"
"$$$/Properties_ClipXML/SourceFile=源文件:"
"$$$/Properties_ClipXML/StretchDuration=Duration:"
"$$$/Properties_ClipXML/StretchModeOff=Off"
"$$$/Properties_ClipXML/StretchModeRealtime=Realtime"
"$$$/Properties_ClipXML/StretchModeRendered=Rendered (High Quality)"
"$$$/Properties_ClipXML/StretchModeVarispeed=Varispeed"
"$$$/Properties_ClipXML/StretchPrecision=Precision:"
"$$$/Properties_ClipXML/StretchQualityHigh=High"
"$$$/Properties_ClipXML/StretchQualityLow=Low"
"$$$/Properties_ClipXML/StretchQualityMedium=Medium"
"$$$/Properties_ClipXML/StretchTypeMonophonic=Monophonic"
"$$$/Properties_ClipXML/StretchTypePolyphonic=Polyphonic"
"$$$/Properties_ClipXML/TransientSensitivity=Transient Sensitivity:"
"$$$/Properties_ClipXML/Type=Type:"
"$$$/Properties_ClipXML/WindowSize=Window Size:"
"$$$/Properties_SessionXML/BitDepth=位深度:"
"$$$/Properties_SessionXML/CustomizeMetronomePatternButtonTT=Customize the current metronome accent pattern"
"$$$/Properties_SessionXML/CustomizeMetronomePatternButtonText=Pattern..."
"$$$/Properties_SessionXML/Duration=持续时间:"
"$$$/Properties_SessionXML/EnableMetronomeButtonTT=Turn on or off the metronome"
"$$$/Properties_SessionXML/FilePath=文件路径:"
"$$$/Properties_SessionXML/Info=Info"
"$$$/Properties_SessionXML/MetronomeSoundSetTT=Select the sound set to be used by the metronome"
"$$$/Properties_SessionXML/MillisecondsLabel= ms"
"$$$/Properties_SessionXML/SampleRate=采样率:"
"$$$/Properties_SessionXML/SemitonesLabel= semitones"
"$$$/Properties_SessionXML/Sound=Sound:"
"$$$/Properties_SessionXML/SoundType_African1=African 1"
"$$$/Properties_SessionXML/SoundType_African2=African 2"
"$$$/Properties_SessionXML/SoundType_Beeps=Beeps"
"$$$/Properties_SessionXML/SoundType_Cymbals=Cymbals"
"$$$/Properties_SessionXML/SoundType_Kit=Kit"
"$$$/Properties_SessionXML/SoundType_Latin1=Latin 1"
"$$$/Properties_SessionXML/SoundType_Latin2=Latin 2"
"$$$/Properties_SessionXML/SoundType_Latin3=Latin 3"
"$$$/Properties_SessionXML/SoundType_Sticks=Sticks"
"$$$/Properties_SessionXML/SoundType_Tabla=Tabla"
"$$$/Properties_SessionXML/StartTime=Start Time:"
"$$$/Properties_SessionXML/Stretch=Stretch:"
"$$$/Properties_VideoClipXML/Dimensions=尺寸:"
"$$$/Properties_VideoClipXML/FrameRate=帧率:"
"$$$/Properties_VideoClipXML/Info=信息"
"$$$/Properties_VideoFileXML/Dimensions=尺寸:"
"$$$/Properties_VideoFileXML/Duration=持续时间:"
"$$$/Properties_VideoFileXML/FilePath=文件路径:"
"$$$/Properties_VideoFileXML/Format=格式:"
"$$$/Properties_VideoFileXML/FrameRate=帧速率:"
"$$$/Properties_VideoFileXML/Info=信息"
"$$$/ProtectedContent/AlertTitle=@APPNAME"
"$$$/RackEffectEditorWindow/Help=显示此效果的帮助"
"$$$/RackEffectEditorWindow/SlotMax=位置 16"
"$$$/ReverUI/Absorbent=吸音"
"$$$/ReverUI/Characteristics=特性"
"$$$/ReverUI/DecayTime=衰减时间:"
"$$$/ReverUI/Diffusion=扩散:"
"$$$/ReverUI/Dry=干声:"
"$$$/ReverUI/OutputLevel=输出电平"
"$$$/ReverUI/Perception=感知:"
"$$$/ReverUI/PreDelay=预延迟时间:"
"$$$/ReverUI/Reflective=反射"
"$$$/ReverUI/SumInputs=总输入"
"$$$/ReverUI/Wet=湿声:"
"$$$/ReverUI/calculating=计算脉冲"
"$$$/SaveAsDialog/SampleTypeSummary=@0 Hz @1, @2"
"$$$/SaveAssociatedFilesDialogXML/ConvertFiles=Convert files"
"$$$/SaveCopiesXML/CopyEntireSourceFiles=Copy entire source files"
"$$$/SaveCopiesXML/CopySourceFilesTrimmed=Copy source files trimmed to clip lengths"
"$$$/SaveCopiesXML/HandleDuration=Handle Duration:"
"$$$/SaveCopiesXML/MediaOptions=Media Options:"
"$$$/SaveSessionAsTemplateDialogXML/LocationWarning=The preferred location for session templates could not be located. Please consult your preferences and/or media."
"$$$/SelectionViewControls/Duration=持续时间"
"$$$/SelectionViewControls/End=结束"
"$$$/SelectionViewControls/Selection=选区"
"$$$/SelectionViewControls/Start=开始"
"$$$/SelectionViewControls/View=视图"
"$$$/SessionPlugIns/FinalCutXML/And= & "
"$$$/SessionPlugIns/FinalCutXML/BusName= 输出 "
"$$$/SessionPlugIns/FinalCutXML/BusNames= 输出 "
"$$$/SessionPlugIns/FinalCutXML/FormatDescription=FCP XML 交换格式"
"$$$/SessionPlugIns/FinalCutXML/FormatNameFinalCutXML=FCP XML 交换格式"
"$$$/SessionPlugIns/FinalCutXML/PlugInName=FCP XML 合成项目插件"
"$$$/SessionPlugIns/FinalCutXML/SequenceID=序列-1"
"$$$/SessionPlugIns/LegacySES/FormatNameLegacySES=Audition / CoolEdit 合成项目"
"$$$/SessionPlugIns/LegacySES/PlugInName=Audition / CoolEdit session 插件"
"$$$/SessionPlugIns/LegacyXML/Au3SessionFormatDescription=Adobe Audition 3 合成项目"
"$$$/SessionPlugIns/LegacyXML/BeatOffsetIgnored=检测到不兼容的 @0 毫秒的歌曲开始时间，因而不能导入。"
"$$$/SessionPlugIns/LegacyXML/CELFiles=CEL 文件不被支持。"
"$$$/SessionPlugIns/LegacyXML/Effects=效果不被支持。"
"$$$/SessionPlugIns/LegacyXML/FormatNameLegacyXML=Audition 3.0 XML 合成项目"
"$$$/SessionPlugIns/LegacyXML/MIDITracks=MIDI 轨不被支持。"
"$$$/SessionPlugIns/LegacyXML/PlugInName=Audition 3.0 XML 合成项目插件"
"$$$/SessionPlugIns/PremierePro/FormatDescription=Adobe Premiere Pro 序列 XML"
"$$$/SessionPlugIns/PremiereProInterchange/FormatNameFinalCutXML=Adobe Premiere Pro 序列 XML"
"$$$/SessionPlugIns/PremiereProInterchange/PlugInName=Adobe Premiere Pro 到 Audition XML 合成项目交换插件"
"$$$/SessionPlugIns/SesxNative/FormatDescription=Adobe Audition @0 合成项目"
"$$$/SpectralPrefsXML/DecibelRange=分贝范围:"
"$$$/SpectralPrefsXML/DecibelRangeTT=设置用于频谱显示的可见振幅范围"
"$$$/SpectralPrefsXML/GridlineOpacityLabel=Gridline Opacity:"
"$$$/SpectralPrefsXML/GridlineOpacityTT=Set the opacity of gridlines for the spectral display"
"$$$/SpectralPrefsXML/GridlinesCheckbox=Show gridlines"
"$$$/SpectralPrefsXML/GridlinesCheckboxTT=Check this to show gridlines in this spectral display"
"$$$/SpectralPrefsXML/PlayOnlySelectedFrequenciesTT=如果一个频谱选区存在，该复选框决定是否只有频谱选区或完整范围被回放"
"$$$/SpectralPrefsXML/PlaySelectedFrequencies=在一个频谱选区存在时仅播放选中频率"
"$$$/SpectralPrefsXML/SpectralResolution=频谱分辨率:"
"$$$/SpectralPrefsXML/SpectralResolutionTT=设置在绘制频率完整范围时使用的行数"
"$$$/SpectralPrefsXML/WindowingFunction=开窗功能:"
"$$$/SpectralPrefsXML/WindowingFunction/Blackmann=Blackmann"
"$$$/SpectralPrefsXML/WindowingFunction/BlackmannHarris=Blackmann-Harris"
"$$$/SpectralPrefsXML/WindowingFunction/Hamming=Hamming"
"$$$/SpectralPrefsXML/WindowingFunction/Hann=Hann"
"$$$/SpectralPrefsXML/WindowingFunction/Triangular=三角形"
"$$$/SpectralPrefsXML/WindowingFunction/WelchGaussian=Welch (Gaussian)"
"$$$/SpectralPrefsXML/WindowingFunctionTT=设置显示前用于分段频谱数据的方式"
"$$$/SplashScreenXML/CopyrightInfo=版权所有 © 1992-2012 Adobe Systems Incorporated 及其许可方。#{endl}保留所有权利。在“关于”窗口内参看专利及其它法律信息。#{endl}"
"$$$/SplashScreenXML/InitializingRequiredComponents=正在初始化所需的组件..."
"$$$/StatusBar/BatchProcessFinished=批处理完成用时 @0 秒"
"$$$/StatusBar/MatchVolumeFinished=匹配音量完成用时 @0 秒"
"$$$/Stretch/Advanced=高级"
"$$$/Stretch/Precision=精度:  "
"$$$/StretchUI/Algorithm=算法:"
"$$$/StretchUI/Audition=Audition"
"$$$/StretchUI/ConstantVowel=元音不变"
"$$$/StretchUI/CurrentDuration=当前持续时间:"
"$$$/StretchUI/Defaults=选择适当的默认值"
"$$$/StretchUI/Duration=持续时间"
"$$$/StretchUI/FinalStretch=最终伸缩:"
"$$$/StretchUI/FormantShift=共振变换:"
"$$$/StretchUI/InitStretch=伸缩:"
"$$$/StretchUI/LockDuration=锁定伸缩设置为新的持续时间"
"$$$/StretchUI/LockInitStretch=锁定初始伸缩与变调（重采样）"
"$$$/StretchUI/LockStretch=锁定伸缩与变调"
"$$$/StretchUI/NewDuration=新的持续时间:"
"$$$/StretchUI/Overlapping=重叠:"
"$$$/StretchUI/PitchCoherence=音调一致:"
"$$$/StretchUI/PitchShift=变调:"
"$$$/StretchUI/PitchShift2=最终变调:"
"$$$/StretchUI/Preserve=保持语音特性"
"$$$/StretchUI/Semintones=半音阶"
"$$$/StretchUI/Solo=独奏乐器或人声"
"$$$/StretchUI/Splicing=拼接频率:"
"$$$/StretchUI/Stretch=伸缩:"
"$$$/StretchUI/StretchAndPitchShift=伸缩与变调"
"$$$/StretchUI/iZotope=iZotope 半径"
"$$$/StudioReverb/Characteristics=特性"
"$$$/StudioReverb/Damping=抑制:"
"$$$/StudioReverb/Decay=衰减:"
"$$$/StudioReverb/Diffusion=扩散:"
"$$$/StudioReverb/Dry=干声:"
"$$$/StudioReverb/EarlyReflections=早反射:"
"$$$/StudioReverb/HFCut=高频切除:"
"$$$/StudioReverb/LFCut=低频切除:"
"$$$/StudioReverb/OutputLevel=输出电平"
"$$$/StudioReverb/RoomSize=房间大小:"
"$$$/StudioReverb/Wet=湿声:"
"$$$/StudioReverb/Width=宽度:"
"$$$/SurroundPannerPanel/Angle=角度:"
"$$$/SurroundPannerPanel/Center=中置:"
"$$$/SurroundPannerPanel/LFE=重低音:"
"$$$/SurroundPannerPanel/Radius=半径:"
"$$$/SurroundPannerPanel/StereoSpread=立体声扩展:"
"$$$/TimeSettingsViewXML/BeatsPerMinuteSuffix= 节拍/分钟"
"$$$/TimeSettingsViewXML/BeatsPerMinuteTT=设置每分钟的节拍数，用于“小节与节拍”时间格式的操作。"
"$$$/TimeSettingsViewXML/CustomFrameRate=自定义帧速率:"
"$$$/TimeSettingsViewXML/CustomFrameRateTT=设置自定义的帧速率（每秒的帧数），用于“自定义”时间格式的操作。"
"$$$/TimeSettingsViewXML/Subdivisions=细分:"
"$$$/TimeSettingsViewXML/SubdivisionsTT=设置每个节拍的细分数量，用于“小节与节拍”时间格式的操作。"
"$$$/TimeSettingsViewXML/TempoLabel=速率:"
"$$$/TimeSettingsViewXML/TimeFormat=时间格式:"
"$$$/TimeSettingsViewXML/TimeFormatTT=设置用于时间线标尺，时间面板，以及其它时间显示的时间格式。"
"$$$/TimeSettingsViewXML/TimeSigTT=设置时间签名（每小节节拍/音符长度），用于“小节与节拍”时间格式的操作。"
"$$$/TimeSettingsViewXML/TimeSignature=时间签名:"
"$$$/TimeSettingsViewXML/framespersec= 帧/秒"
"$$$/TransportXML/FastForwardTT=快进"
"$$$/TransportXML/LoopPlaybackTT=循环播放"
"$$$/TransportXML/MoveCTIToNextTT=移动指示器到下一处"
"$$$/TransportXML/MoveCTIToPreviousTT=移动指示器到前一处"
"$$$/TransportXML/PauseTT=暂停"
"$$$/TransportXML/PlayTT=播放"
"$$$/TransportXML/RecordTT=录制"
"$$$/TransportXML/RewindTT=倒放"
"$$$/TransportXML/SkipSelectionTT=跳过选区"
"$$$/TransportXML/StopTT=停止"
"$$$/UserInterfacePrefsPage/CTIColor=设置时间指示器颜色"
"$$$/UserInterfacePrefsPage/CartMarkerColor=Set the cart timer marker color"
"$$$/UserInterfacePrefsPage/CueMarkerColor=Set the cue marker color"
"$$$/UserInterfacePrefsPage/SubclipMarkerColor=Set the subclip marker color"
"$$$/UserInterfacePrefsPage/TrackMarkerColor=Set the track marker color"
"$$$/UserInterfacePrefsPage/WaveformBackgroundColor=设置波形编辑器中的波形背景色（在多轨编辑器内不会应用到素材）"
"$$$/UserInterfacePrefsPage/WaveformForegroundColor=设置波形前景色"
"$$$/UserInterfacePrefsPage/WaveformSelectionColor=设置波形选区色"
"$$$/VideoPropertiesView/fps=@0 fps"
"$$$/WaveDocumentController/CopiedInSeconds=复制用时 @0 秒"
"$$$/WaveDocumentController/OpenedInSeconds=打开用时 @0 秒"
"$$$/WaveDocumentController/SavedInSeconds=保存用时 @0 秒"
"$$$/abe/AuAudioComponentRack/LastAppliedRackPresetName=(最后应用效果架)"
"$$$/abe/ExportAudioOperation/UnavailableDestinationError=在保存文件到磁盘时发生了错误。目标空间可能已满或不再可用。"
"$$$/abe/FileUtils/Copy=复制"
"$$$/abe/FileUtils/CountedCopy=复制(@0)"
"$$$/abe/MixingEngine/PowerParamNormalizer/Off=关"
"$$$/abe/MixingEngine/PowerParamNormalizer/On=开"
"$$$/abe/ReverseRenderOperation/Description=前后反向"
"$$$/abe/ReverseRenderOperation/Progress=前后反向..."
"$$$/abe/RubbaDubRenderOperation/Description=Automatic Speech Alignment"
"$$$/abe/RubbaDubRenderOperation/Progress=Aligning Speech..."
"$$$/amio/AmioAIFFInterface/BigEndian=Big-Endian (PowerPC Byte Order)"
"$$$/amio/AmioAIFFInterface/GBLimit=AIFF 不支持生成超过 2GB 的文件尺寸。"
"$$$/amio/AmioAIFFInterface/LittleEndian=Little-Endian (Intel Byte Order)"
"$$$/amio/AmioAIFFInterface/SettingsDescriptionBase=未压缩AIFF"
"$$$/amio/AmioATSettingsDialog/ATSettings=Apple AudioToolbox Settings"
"$$$/amio/AmioATSettingsDialog/ConstantBitrate=Constant Bitrate"
"$$$/amio/AmioATSettingsDialog/LongTermAverageBitrate=Long-Term Average Bitrate"
"$$$/amio/AmioATSettingsDialog/MegabitsPerSecond= Mbps"
"$$$/amio/AmioATSettingsDialog/UnableToCalculateBitrate=(Unable to Calculate Bitrate)"
"$$$/amio/AmioATSettingsDialog/UnknownBitrateMode=(Unknown Bitrate Mode: @0)"
"$$$/amio/AmioATSettingsDialog/VariableBitrate=Variable Bitrate"
"$$$/amio/AmioATSettingsDialog/VariableBitrateContrainted=Variable Bitrate (Constrained)"
"$$$/amio/AmioATSettingsDialog/bitsPerSecond= bps"
"$$$/amio/AmioATSettingsDialog/kilobitsPerSecond= kbps"
"$$$/amio/AmioAiffSettingsDialog/AiffSettings=AIFF 设置"
"$$$/amio/AmioAiffSettingsDialog/NotApplicable=N/A"
"$$$/amio/AmioLSFOpenRawDialog/As=\' As:"
"$$$/amio/AmioLSFOpenRawDialog/Bytes=Bytes   (0x@0)"
"$$$/amio/AmioLSFOpenRawDialog/DefaultWindowTitle=请指定一个数据类型:"
"$$$/amio/AmioLSFOpenRawDialog/IllegalChannelsMsg=声道数量应至少在 @0 条并且不高于 @1 条。"
"$$$/amio/AmioLSFOpenRawDialog/IllegalChannelsMsgTitle=非法的声道数量"
"$$$/amio/AmioLSFOpenRawDialog/IllegalSampleRateMsg=采样率必须至少在 @0 Hz 并且不大于 @1. Hz"
"$$$/amio/AmioLSFOpenRawDialog/IllegalSampleRateMsgTitle=非法的采样率"
"$$$/amio/AmioLSFOpenRawDialog/Open=打开 \'"
"$$$/amio/AmioLSFSettingsDialog/LSFSettings=libsndfile 设置"
"$$$/amio/AmioMp2/FormatDescription/MPEGDEscription=MPEG-@0 Audio Layer II, @1 kbps (CBR)"
"$$$/amio/AmioMp2SettingsDialog/BitRatePopup=@0 kbps (@1 Hz)"
"$$$/amio/AmioMp2SettingsDialog/ChannelAuto=(Automatic)"
"$$$/amio/AmioMp2SettingsDialog/ChannelDual=Dual Mono"
"$$$/amio/AmioMp2SettingsDialog/ChannelJoint=Joint Stereo"
"$$$/amio/AmioMp2SettingsDialog/ChannelMono=Mono"
"$$$/amio/AmioMp2SettingsDialog/ChannelStereo=Stereo"
"$$$/amio/AmioMp2SettingsDialog/Emph50_15microSeconds=50/15 @0s"
"$$$/amio/AmioMp2SettingsDialog/EmphCCITT=CCITT J.17"
"$$$/amio/AmioMp2SettingsDialog/EmphNone=No Emphasis"
"$$$/amio/AmioMp2SettingsDialog/EmphUnknown=Unknown Emphasis Type: @0"
"$$$/amio/AmioMp2SettingsDialog/MPEG1Label=MPEG-1 Audio Layer II"
"$$$/amio/AmioMp2SettingsDialog/MPEG2Label=MPEG-2 LSF Audio Layer II"
"$$$/amio/AmioMp2SettingsDialog/PAMFast=Fast"
"$$$/amio/AmioMp2SettingsDialog/PAMNone=(None)"
"$$$/amio/AmioMp2SettingsDialog/PAMalt1=Type I  (Alternate)"
"$$$/amio/AmioMp2SettingsDialog/PAMalt2=Type II (Alternate)"
"$$$/amio/AmioMp2SettingsDialog/PAMstd1=Type I  (Standard)"
"$$$/amio/AmioMp2SettingsDialog/PAMstd2=Type II (Standard)"
"$$$/amio/AmioMp2SettingsDialog/TwoLameSettings=TwoLame MPEG Audio Layer II Settings"
"$$$/amio/AmioMp3Interface/FormatMp3CBR=MP3 @0 Kbps CBR"
"$$$/amio/AmioMp3Interface/FormatMp3FiveDotOne=5.1"
"$$$/amio/AmioMp3Interface/FormatMp3Mono=单声道"
"$$$/amio/AmioMp3Interface/FormatMp3Stereo=立体声"
"$$$/amio/AmioMp3Interface/FormatMp3VBR=MP3 VBR"
"$$$/amio/AmioMp3PrivateSettings/FormatMp3VBRHighQuality=高品质"
"$$$/amio/AmioMp3PrivateSettings/FormatMp3VBRHighestQuality=最高品质"
"$$$/amio/AmioMp3PrivateSettings/FormatMp3VBRLowBitrate=低比特率"
"$$$/amio/AmioMp3PrivateSettings/FormatMp3VBRMediumBitrate=中等比特率"
"$$$/amio/AmioMp3PrivateSettings/FormatMp3VBRMediumQuality=中等品质"
"$$$/amio/AmioMp3PrivateSettings/VBRSampleRate=@0 (@1 Hz)"
"$$$/amio/AmioMp3PrivateSettings/VbrEquivalent=, 品质类似于 @0 Kbps CBR."
"$$$/amio/AmioMp3SettingsDialog/BitRatePopup=@0 Kbps (@1 Hz)"
"$$$/amio/AmioMp3SettingsDialog/Mp3Settings=MP3 设置"
"$$$/amio/AmioQTInterface/SettingsDescriptionBase=只有音频的QuickTime .mov 格式\n未压缩 PCM 音频"
"$$$/amio/AmioQTSettingsDialog/QTSettings=QT 设置"
"$$$/amio/AmioWavInterface/Legacy4GBFormat=多数据块（传统 Audition 格式）"
"$$$/amio/AmioWavInterface/SettingsDescriptionBase=未压缩音频"
"$$$/amio/AmioWavSettingsDialog/WavSettings=WAV 设置"
"$$$/amio/FormatDescription/Copyright=(Copyright) "
"$$$/amio/FormatDescription/Emph50_15microSeconds=(50/15 @0s Emphasis) "
"$$$/amio/FormatDescription/EmphCCITT=(CCITT J.17 Emphasis) "
"$$$/amio/FormatDescription/FormatMp2AutoMono=Mono, @0 Hz\n"
"$$$/amio/FormatDescription/FormatMp2AutoStereo=Stereo, @0 Hz\n"
"$$$/amio/FormatDescription/FormatMp2DualMono=Dual Mono, @0 Hz\n"
"$$$/amio/FormatDescription/FormatMp2JointStereo=Joint Stereo, @0 Hz\n"
"$$$/amio/FormatDescription/FormatMp2Mono=Mono, @0 Hz\n"
"$$$/amio/FormatDescription/FormatMp2Stereo=Stereo, @0 Hz\n"
"$$$/amio/FormatDescription/Original=(Original)"
"$$$/amio/UnnamedFileType=(Unnamed File Type: '@0', 0x@1)"
"$$$/app/AssetManager/CantFindFile=未能找到文件。"
"$$$/app/AssetManager/GeneralImportFailure=常规性导入失败。"
"$$$/app/AssetManager/Open=打开"
"$$$/app/AudioCD=音频 CD"
"$$$/app/AudioClipEditor/AdjustFadeIn=调节淡入"
"$$$/app/AudioClipEditor/AdjustFadeOut=调节淡出"
"$$$/app/AudioClipEditor/AutoCrossfadesDisabled=素材自动淡化已禁用"
"$$$/app/AudioClipEditor/AutoCrossfadesEnabled=素材自动淡化已启用"
"$$$/app/AudioClipEditor/StretchKeyframes=伸缩关键帧"
"$$$/app/AudioComponentAction/UnsupportedChannels=效果不能应用到此文件
"$$$/app/AudioComponentAction/UnsupportedChannelsWithName='@0' 不能应用到此文件"
"$$$/app/AudioComponentEditor/AddKeyframe=添加关键帧"
"$$$/app/AudioComponentEditor/DeleteKeyframes=删除关键帧"
"$$$/app/AudioComponentEditor/ModifyKeyframes=修改关键帧"
"$$$/app/BatchProcessManager/ErrorApplyingFavorite= '@0' 收藏效果不能应用到此文件"
"$$$/app/BatchProcessManager/ErrorGettingSaveFile=尝试确定一个保存的目标文件时有一个错误。"
"$$$/app/BatchProcessManager/ErrorLockedSampleRate=由于文件当前用于多轨合成项目中，它不能被存储为不同的采样率。"
"$$$/app/BwfEditAction/EditBwf=编辑 Bwf"
"$$$/app/CDDocument/ConformToRedbook=Conforming to Audio CD Format..."
"$$$/app/CDDocumentFactory/OneTrackCouldNotBeCreated=1 track was not able to be created, as either the referenced file is missing or the file does not contain the required track marker."
"$$$/app/CDDocumentFactory/SomeFilesCouldNotOpen=@0 of the @1 files referenced by the session could not be found. Press the 'Link Media' button to locate the missing files now, or the 'OK' button to set the clips referencing missing files to offline, to be linked later."
"$$$/app/CDDocumentFactory/SomeTracksCouldNotBeCreated=@0 tracks were not able to be created, as either the referenced files are missing or the files do not contain the required track markers."
"$$$/app/CDSequenceActions/AddCDTracks=Add CD Tracks"
"$$$/app/CDSequenceActions/Arranger=Arranger"
"$$$/app/CDSequenceActions/Artist=Artist"
"$$$/app/CDSequenceActions/Composer=Composer"
"$$$/app/CDSequenceActions/Genre=Genre"
"$$$/app/CDSequenceActions/ISRC=ISRC"
"$$$/app/CDSequenceActions/MediaCatalogNumber=MCN"
"$$$/app/CDSequenceActions/Message=Message"
"$$$/app/CDSequenceActions/MoveCDTracks=Move CD Tracks"
"$$$/app/CDSequenceActions/RemoveAllCDTracks=Remove All CD Tracks"
"$$$/app/CDSequenceActions/RemoveCDTracks=Remove CD Tracks"
"$$$/app/CDSequenceActions/SetDiscGenreCode=Set Disc Genre Code"
"$$$/app/CDSequenceActions/SetDiscProperty=Set Disc @0"
"$$$/app/CDSequenceActions/SetTrackGenreCode=Set Track Genre Code"
"$$$/app/CDSequenceActions/SetTrackPause=Set Track Pause"
"$$$/app/CDSequenceActions/SetTrackProperty=Set Track @0"
"$$$/app/CDSequenceActions/Songwriter=Songwriter"
"$$$/app/CDSequenceActions/Title=Title"
"$$$/app/ChannelMapAction/SetEffectChannelMap=Set Effect Channel Map"
"$$$/app/ConvertSampleTypeBatchAction/SameAsSource=Same as Source"
"$$$/app/ConvertSampleTypeBatchAction/SourceBitDepth=Source Bit Depth"
"$$$/app/ConvertSampleTypeBatchAction/SourceChannels=Source Channels"
"$$$/app/ConvertSampleTypeBatchAction/SourceSampleRate=Source Sample Rate"
"$$$/app/Document/JobProcessingFailedMsg=@0 完成失败"
"$$$/app/Document/JobProcessingMsg=@0 完成 @1 秒"
"$$$/app/DocumentFactory/OutOfMemoryError=没有足够的内存来打开文件"
"$$$/app/DocumentManager/CantFindFile=无法找到该文件."
"$$$/app/DrivesTopBrowseProvider/AudioSourceFormat=音频源格式"
"$$$/app/DrivesTopBrowseProvider/BitDepth=位深度"
"$$$/app/DrivesTopBrowseProvider/Channels=声道"
"$$$/app/DrivesTopBrowseProvider/Drives=驱动器"
"$$$/app/DrivesTopBrowseProvider/Duration=持续时间"
"$$$/app/DrivesTopBrowseProvider/FilePath=文件路径"
"$$$/app/DrivesTopBrowseProvider/MediaType=媒体类型"
"$$$/app/DrivesTopBrowseProvider/Name=名称"
"$$$/app/DrivesTopBrowseProvider/SampleRate=采样率"
"$$$/app/DrivesTopBrowseProvider/Shortcuts=快捷方式"
"$$$/app/DrivesTopBrowseProvider/VideoSourceFormat=视频源格式"
"$$$/app/DrivesTopBrowseProvider/Volumes=音量"
"$$$/app/DynamicNoiseRemovalAction/IncompatibleNoiseProfile=噪声样本与该文件不兼容"
"$$$/app/EffectsRackAction/AddEffect=添加 @0"
"$$$/app/EffectsRackAction/ApplyRackPreset=应用效果架预设"
"$$$/app/EffectsRackAction/ClearEffectsRack=清除效果架"
"$$$/app/EffectsRackAction/Effect=效果"
"$$$/app/EffectsRackAction/RemoveEffect=移除 @0"
"$$$/app/EffectsRackAction/ReorderEffect=录制 @0"
"$$$/app/EffectsRackAction/SetRackParameter=设置 @0"
"$$$/app/EffectsRackAction/SetRackPower=设置效果架开关"
"$$$/app/EffectsRackAction/SetSlotPower=设置位置通道开关"
"$$$/app/EffectsRackCommandHandler/ClearRack=清除效果架"
"$$$/app/EffectsRackCommandHandler/DeleteAllEffects=移除所有效果"
"$$$/app/EffectsRackCommandHandler/RemoveEffects=移除效果"
"$$$/app/ExportController/FinishedWithWarnings=操作已完成，但有下列警告： @0"
"$$$/app/FavoriteManager/NoFavorite=(无)"
"$$$/app/FileBrowseProvider/51=5.1"
"$$$/app/FileBrowseProvider/51Channel=5.1 Channel"
"$$$/app/FileBrowseProvider/Audio=Audio"
"$$$/app/FileBrowseProvider/AudioVideo=Audio/Video"
"$$$/app/FileBrowseProvider/Channel= Channel"
"$$$/app/FileBrowseProvider/Mono=Mono"
"$$$/app/FileBrowseProvider/NumericChannelCountFormat=@0@1"
"$$$/app/FileBrowseProvider/SampleRateWUnits=@0 Hz"
"$$$/app/FileBrowseProvider/Stereo=Stereo"
"$$$/app/FileBrowseProvider/Video=Video"
"$$$/app/FileBrowseProvider/bitFormat=@0-bit"
"$$$/app/Initializer/AudioDeviceState=设备"
"$$$/app/Initializer/DLMSSystemInitialize=DLMS"
"$$$/app/Initializer/XmpSystemInitialize=XMP"
"$$$/app/MarkerAddDeleteAction/AddCDTrackNamePlural=Add CD Track Markers"
"$$$/app/MarkerAddDeleteAction/AddCDTrackNameSingular=Add CD Track Marker"
"$$$/app/MarkerAddDeleteAction/AddCueNamePlural=Add Cue Markers"
"$$$/app/MarkerAddDeleteAction/AddCueNameSingular=Add Cue Marker"
"$$$/app/MarkerAddDeleteAction/AddNamePlural=添加标记"
"$$$/app/MarkerAddDeleteAction/AddNameSingular=添加标记"
"$$$/app/MarkerAddDeleteAction/DeleteCDTrackNamePlural=Delete CD Track Markers"
"$$$/app/MarkerAddDeleteAction/DeleteCDTrackNameSingular=Delete CD Track Marker"
"$$$/app/MarkerAddDeleteAction/DeleteCueNamePlural=Delete Cue Markers"
"$$$/app/MarkerAddDeleteAction/DeleteCueNameSingular=Delete Cue Marker"
"$$$/app/MarkerAddDeleteAction/DeleteNamePlural=删除标记"
"$$$/app/MarkerAddDeleteAction/DeleteNameSingular=删除标记"
"$$$/app/MarkerDurationShiftAction/Name=调节标记长度"
"$$$/app/MarkerEditAction/EditMarker=编辑标记"
"$$$/app/MarkerEditAction/MoveMarker=移动标记"
"$$$/app/MarkerEndPointSetAction/Name=调节标记结束点"
"$$$/app/MarkerShfitAction/Name=移动标记"
"$$$/app/MarkerStartPointSetAction/Name=调节标记结束点"
"$$$/app/MatchVolumeHelper/SetClipGain=设置素材增益"
"$$$/app/MetadataEditor/ClearMetadataOnSaveAs=另存为时清除元数据"
"$$$/app/MetadataEditor/EditMarkers=编辑标记"
"$$$/app/MetadataEditor/MergeMarkers=合并标记"
"$$$/app/MultiBatchAction/ChannelsError=录制声道选区不能被应用"
"$$$/app/MultiBatchAction/GenericError=应用收藏效果时有问题"
"$$$/app/MultiBatchAction/SelectionError=录制时间选区不能被应用"
"$$$/app/MultitrackAsset/MultitrackFormatDescription=Adobe Audition @0 合成项目"
"$$$/app/MultitrackDocument/AddClips=添加素材"
"$$$/app/MultitrackDocument/AddEffectToSelection=添加 @0"
"$$$/app/MultitrackDocument/AlignedSuffix=_Aligned"
"$$$/app/MultitrackDocument/Bounce=内部缩混"
"$$$/app/MultitrackDocument/BounceToTrackDescription=内部缩混到声轨"
"$$$/app/MultitrackDocument/BounceToTrackProgress=内部缩混到声轨..."
"$$$/app/MultitrackDocument/Bus=总音轨 @0"
"$$$/app/MultitrackDocument/Center=_C"
"$$$/app/MultitrackDocument/ClipRackNamePrefix=素材: @0 (@1)"
"$$$/app/MultitrackDocument/ClipRackNamePrefixNoTrack=素材: @0"
"$$$/app/MultitrackDocument/Cut=剪切"
"$$$/app/MultitrackDocument/ExportOMFDescription=创建 OMF 兼容合成项目"
"$$$/app/MultitrackDocument/ExportOMFProgress=正在生成 OMF 导出音频文件"
"$$$/app/MultitrackDocument/Left=_L"
"$$$/app/MultitrackDocument/LeftSurround=_Ls"
"$$$/app/MultitrackDocument/LowFrequencyEffect=_LFE"
"$$$/app/MultitrackDocument/MatchClipVolumeDescription=已匹配素材音量..."
"$$$/app/MultitrackDocument/MatchClipVolumeProgress=正在匹配素材音量..."
"$$$/app/MultitrackDocument/PasteClips=粘贴素材"
"$$$/app/MultitrackDocument/PreRenderTrackDescription=预渲染轨道..."
"$$$/app/MultitrackDocument/RecordKeyframes=记录关键帧"
"$$$/app/MultitrackDocument/RemoveAudioClip=移除音频素材"
"$$$/app/MultitrackDocument/RemoveFade=移除淡化"
"$$$/app/MultitrackDocument/RemoveVideoClips=移除视频素材"
"$$$/app/MultitrackDocument/Right=_R"
"$$$/app/MultitrackDocument/RightSurround=_Rs"
"$$$/app/MultitrackDocument/SetStartTime=设置开始时间"
"$$$/app/MultitrackDocument/StrechClips=伸缩素材"
"$$$/app/MultitrackDocument/StrechModeRealtime=设置伸缩模式为实时"
"$$$/app/MultitrackDocument/Track=轨道 @0"
"$$$/app/MultitrackDocument/TrackRackNamePrefix=轨道: "
"$$$/app/MultitrackDocument/VideoReference=视频参考"
"$$$/app/MultitrackDocument/Warnings=警告:"
"$$$/app/MultitrackDocument/mixdownToNewFileDescription=缩混为新文件"
"$$$/app/MultitrackDocument/mixdownToNewFileProgress=缩混为新文件..."
"$$$/app/MultitrackMixdownHelper/EmbedEditOriginal=Embed Edit Original link data"
"$$$/app/MultitrackMixdownHelper/EntireSession=Entire Session"
"$$$/app/MultitrackMixdownHelper/Master51=Master (5.1)"
"$$$/app/MultitrackMixdownHelper/MasterMono=Master (mono)"
"$$$/app/MultitrackMixdownHelper/MasterStereo=Master (stereo)"
"$$$/app/MultitrackMixdownHelper/Mono=Mono"
"$$$/app/MultitrackMixdownHelper/Selection=Current Time Selection Only"
"$$$/app/MultitrackMixdownHelper/SixChannel=SixChannel"
"$$$/app/MultitrackMixdownHelper/Stereo=Stereo"
"$$$/app/MultitrackSequence/Editors/InsertVideo=插入视频"
"$$$/app/MultitrackSequence/Editors/InsertWaveform=插入波形"
"$$$/app/MultitrackSequenceEditor/AddAudioClipTrack=添加音频轨"
"$$$/app/MultitrackSequenceEditor/AddAudioClips=添加音频素材"
"$$$/app/MultitrackSequenceEditor/AddBusTrack=添加总线声轨"
"$$$/app/MultitrackSequenceEditor/AddClipToGroup=添加素材到编组"
"$$$/app/MultitrackSequenceEditor/AddVideoClip=添加视频素材"
"$$$/app/MultitrackSequenceEditor/AddVideoReferenceTrack=添加视频轨"
"$$$/app/MultitrackSequenceEditor/AlignClipsRubbaDub=Automatic Speech Alignment"
"$$$/app/MultitrackSequenceEditor/AssignAudioTrackOutput=分配声轨输出"
"$$$/app/MultitrackSequenceEditor/BounceToTrack=内部缩混到声轨"
"$$$/app/MultitrackSequenceEditor/ConvertToUniqueClip=转换为唯一拷贝"
"$$$/app/MultitrackSequenceEditor/CopyClips=复制素材"
"$$$/app/MultitrackSequenceEditor/CopyToUniqueClips=复制唯一拷贝"
"$$$/app/MultitrackSequenceEditor/DeleteAudioClipTrack=删除音频轨"
"$$$/app/MultitrackSequenceEditor/DeleteBusTrack=删除总音轨"
"$$$/app/MultitrackSequenceEditor/DeleteVideoReferenceTrack=删除视频轨"
"$$$/app/MultitrackSequenceEditor/DuplicateTrack=复制轨道"
"$$$/app/MultitrackSequenceEditor/GroupClips=编组素材"
"$$$/app/MultitrackSequenceEditor/LockInTime=锁定时间内素材"
"$$$/app/MultitrackSequenceEditor/Loop=循环素材"
"$$$/app/MultitrackSequenceEditor/MoveClips=移动素材"
"$$$/app/MultitrackSequenceEditor/MoveTrack=移动轨道"
"$$$/app/MultitrackSequenceEditor/MuteClips=静音素材"
"$$$/app/MultitrackSequenceEditor/Razor=切割"
"$$$/app/MultitrackSequenceEditor/Record=录制"
"$$$/app/MultitrackSequenceEditor/RemoveAudioClips=移除音频素材"
"$$$/app/MultitrackSequenceEditor/RemoveClipFromGroup=从编组移除素材"
"$$$/app/MultitrackSequenceEditor/RemoveClips=移除素材"
"$$$/app/MultitrackSequenceEditor/RemoveVideoClip=移除视频素材"
"$$$/app/MultitrackSequenceEditor/RenameClip=重命名素材为 \"@0\""
"$$$/app/MultitrackSequenceEditor/RenameGroup=重命名编组为 \"@0\""
"$$$/app/MultitrackSequenceEditor/RenameTrack=重命名轨道为 \"@0\""
"$$$/app/MultitrackSequenceEditor/SetClipsColor=设置素材颜色"
"$$$/app/MultitrackSequenceEditor/SetGroupColor=设置编组颜色"
"$$$/app/MultitrackSequenceEditor/SlipClip=滑动素材"
"$$$/app/MultitrackSequenceEditor/SplitClips=拆分素材"
"$$$/app/MultitrackSequenceEditor/TrimClips=修剪素材"
"$$$/app/MultitrackSequenceEditor/UngroupClips=解散素材"
"$$$/app/NewCDLayoutFilename=未命名CD布局 @0"
"$$$/app/NewFileNaming/DefaultFilename=未命名 @0"
"$$$/app/NoiseReductionAction/IncompatibleNoiseProfile=噪声样本与该文件不兼容"
"$$$/app/PlayListAddAction/NamePlural=添加条目到播放列表"
"$$$/app/PlayListAddAction/NameSingular=添加条目到播放列表"
"$$$/app/PlayListItemEditAction/Name=编辑播放列表条目"
"$$$/app/PlayListRemoveAction/NamePlural=删除播放列表条目"
"$$$/app/PlayListRemoveAction/NameSingular=删除播放列表条目"
"$$$/app/PlayListReorderAction/Name=改变播放列表顺序"
"$$$/app/PresetManager/CustomPresetName=(自定义)"
"$$$/app/PresetManager/DefaultPresetName3rdParty=默认"
"$$$/app/SessionOpener/BusTrackInsertionFailedWarning=总音轨 '@0' 不能被插入。"
"$$$/app/SessionOpener/ClipTrackDuplicateIDWarning=轨道标签 '@0' 有一个副本轨道 ID 因而将被跳过。"
"$$$/app/SessionOpener/ClipTrackInsertionFailedWarning=音频轨 '@0' 不能被导入。"
"$$$/app/SessionOpener/ClipsWithoutAssetWarning=@1 的 @0 素材没有文件资源: @2."
"$$$/app/SessionOpener/InvalidSequence=交换文件不包含任何轨道"
"$$$/app/SessionOpener/Master=主控"
"$$$/app/SessionOpener/MissingEffectsWarning=由文件参考的 @1 效果的 @0 找不到: @2."
"$$$/app/SessionOpener/NullPortDescritpion=无"
"$$$/app/SessionOpener/SomeFilesCouldNotOpen=合成项目的 @1 引用的文件 @0 找不到。立即点按“链接媒体”按钮来定位丢失文件，或者按“确定”按钮设置素材参考丢失文件为脱机，稍后再进行链接。"
"$$$/app/SessionOpener/SomeUnreferencedFilesCouldNotOpen=@0 of the @1 files that were in the files panel when this session was saved could not be found. Press the 'Link Media' button to locate the missing files. Press OK to ignore this warning and open the session without these files."
"$$$/app/SessionOpener/UntitledBus=未命名总线声轨"
"$$$/app/SessionOpener/VideoReference=视频引用"
"$$$/app/SessionOpener/XmpReadWarning=文件内发现元数据，但是它已损坏并且不能被读取。"
"$$$/app/WaveAsset/RackNamePrefix=文件: "
"$$$/app/WaveDocument/AnalyzeStatisticsDescription=分析统计"
"$$$/app/WaveDocument/AnalyzeStatisticsProgress=正在分析统计..."
"$$$/app/WaveDocument/ApplyEffectsRack=应用效果架"
"$$$/app/WaveDocument/CaptureDynamicNoiseProfileDescription=采集动态噪声样本"
"$$$/app/WaveDocument/CaptureDynamicNoiseProfileProgress=正在采集动态噪声样本..."
"$$$/app/WaveDocument/CaptureNoiseReductionProfileDescription=采集噪声样本"
"$$$/app/WaveDocument/CaptureNoiseReductionProfileProgress=正在采集噪声样本..."
"$$$/app/WaveDocument/ConvertSampleTypeDescription=转换采样类型"
"$$$/app/WaveDocument/ConvertSampleTypeHistory=转换采样类型"
"$$$/app/WaveDocument/ConvertSampleTypeOnSaveAs=在另存为时转换采样类型"
"$$$/app/WaveDocument/ConvertSampleTypeProgress=正在转换采样类型..."
"$$$/app/WaveDocument/CopyDescription=复制"
"$$$/app/WaveDocument/CopyProgress=复制..."
"$$$/app/WaveDocument/CropDescription=裁剪"
"$$$/app/WaveDocument/CropProgress=裁剪..."
"$$$/app/WaveDocument/CutDescription=剪切"
"$$$/app/WaveDocument/CutProgress=剪切..."
"$$$/app/WaveDocument/DynamicNoiseRemovalProgress=正在移除动态噪声..."
"$$$/app/WaveDocument/EffectsRackSettingsLoadFailure=效果架设置不能被读取和应用到此文件"
"$$$/app/WaveDocument/FrequencyAnalysisDescription=频率分析"
"$$$/app/WaveDocument/FrequencyAnalysisProgress=正在分析频率..."
"$$$/app/WaveDocument/InsertSilenceDescription=插入静音"
"$$$/app/WaveDocument/InsertSilenceProgress=正在插入静音..."
"$$$/app/WaveDocument/InvertDescription=反转"
"$$$/app/WaveDocument/InvertProgress=正在反转..."
"$$$/app/WaveDocument/Left=Left"
"$$$/app/WaveDocument/MixPasteDescription=混合粘贴"
"$$$/app/WaveDocument/MixPasteProgress=正在混合粘贴..."
"$$$/app/WaveDocument/NoiseReductionProgress=正在降噪..."
"$$$/app/WaveDocument/NormalizeDescription=标准化"
"$$$/app/WaveDocument/NormalizeProgress=正在标准化..."
"$$$/app/WaveDocument/PasteDescription=粘贴"
"$$$/app/WaveDocument/PasteProgress=正在粘贴..."
"$$$/app/WaveDocument/ReinterpretSampleRateHistory=解释采样率"
"$$$/app/WaveDocument/RepairDescription=自动修复"
"$$$/app/WaveDocument/RepairProgress=正在自动修复..."
"$$$/app/WaveDocument/SilenceDescription=静音"
"$$$/app/WaveDocument/SilenceProgress=正在静音..."
"$$$/app/WaveDocument/SpecDeleteDescription=删除频谱选区"
"$$$/app/WaveDocument/SpecDeleteProgress=正在删除频谱选区..."
"$$$/app/WaveDocument/SpecEditDescription=频谱编辑"
"$$$/app/WaveDocument/SpecEditProgress=正在频谱编辑..."
"$$$/app/WaveDocument/SplitToMonoDescription=提取声道"
"$$$/app/WaveDocument/SplitToMonoProgress=正在提取声道..."
"$$$/app/WaveDocumentUtils/ExtractAudioFromVideo/NewDocNameFirst=@0 音频已提取"
"$$$/app/WaveDocumentUtils/ExtractAudioFromVideo/NewDocNameSubsequent=@0 音频已提取 @1"
"$$$/app/XmpUpdateAction/MetadataAction=元数据更改"
"$$$/app/asset/CancelledFileDescription= (取消)"
"$$$/app/asset/PartialFileDescription= (偏好)"
"$$$/app/asset/ReadingFileDescription=读取 @0"
"$$$/app/asset/ReadingFileProgressDescription=读取 @0..."
"$$$/app/asset/ScanningFileProgressDescription=正在扫描音高..."
"$$$/app/export/AutoSaveCDLayoutDescription=恢复数据自动保存"
"$$$/app/export/AutoSaveCDLayoutProgress=正在自动保存恢复数据..."
"$$$/app/export/AutoSaveMultitrackDescription=恢复数据自动保存"
"$$$/app/export/AutoSaveMultitrackProgress=正在自动保存恢复数据..."
"$$$/app/export/ExportCDLayoutDescription=保存CD布局"
"$$$/app/export/ExportCDLayoutProgress=正在保存CD布局..."
"$$$/app/export/ExportController/WarningTemplate=警告: @0"
"$$$/app/export/ExportFileDescription=文件导出"
"$$$/app/export/ExportFileProgress=导出文件..."
"$$$/app/export/ExportMultitrackDescription=多轨合成保存"
"$$$/app/export/ExportMultitrackProgress=正在保存多轨合成..."
"$$$/app/export/ExportSelectionDescription=选区导出"
"$$$/app/export/ExportSelectionProgress=正在导出选区..."
"$$$/app/export/SaveFileDescription=存储"
"$$$/app/export/SaveFileProgress=存储..."
"$$$/app/export/SaveMetadataDescription=保存元数据"
"$$$/app/export/SaveMetadataProgress=正在保存元数据..."
"$$$/app/sessionHost/GeneralWarning=常规警告"
"$$$/app/sessionHost/OMF_Errors/BitDepthMismatch=文件位深度不匹配序列。"
"$$$/app/sessionHost/OMF_Errors/CreateFileInfoError=无法创建文件信息."
"$$$/app/sessionHost/OMF_Errors/InvalidFileID=无效的 'FileID' 在序列中。"
"$$$/app/sessionHost/OMF_Errors/NoAudioTracks=OMF 文件不包含任何音频轨。"
"$$$/app/sessionHost/OMF_Errors/NoSourceFiles=没有源文件。"
"$$$/app/sessionHost/OMF_Errors/NotOMF=没有 OMFI 文件。"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_24BITVIDEO=OMFI_ERR: 24 位 (8-8-8) 只有视频"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_3COMPONENT=OMFI_ERR: OMF 文件内仅允许三组视频"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_ADJACENT_TRAN=OMFI_ERR: 序列内相邻过渡不合标准"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADACTABLE=OMFI_ERR: 损坏的 JPEG AC Huffman 表"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADAIFCDATA=OMFI_ERR: 错误读取 AIFC 数据"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADCLOSE=OMFI_ERR: 无法关闭文件"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADCOMPR=OMFI_ERR: 未被识别的 OMF 文件中的压缩类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADCONTAINER=OMFI_ERR: 未能发现 Bento 容器"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADDATAADDRESS=OMFI_ERR: 无效的转换操作数据地址"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADDCTABLE=OMFI_ERR: 损坏的 JPEG DC Huffman 表"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADEXPORTLAYOUT=OMFI_ERR: 未被识别的帧布局"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADEXPORTPIXFORM=OMFI_ERR: 未能识别的像素格式"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADFRAMEOFFSET=OMFI_ERR: 帧索引偏移超出范围"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADHEAD=OMFI_ERR: 无效的 OMFI HEAD 对象"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADINDEX=OMFI_ERR: 阵列索引超出范围"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADJPEGINFO=OMFI_ERR: JPEG TIFF 区域不允许没有 COMPRESSION == JPEG"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADLAYOUT=OMFI_ERR: OMF 文件内未被识别的帧布局"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADMEDIATYPE=OMFI_ERR: 未被识别的媒体类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADOBJ=OMFI_ERR: 无效的 OMFI/Bento 对象"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADOPEN=OMFI_ERR: 无法打开文件"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADPIXFORM=OMFI_ERR: OMF 文件内未被识别的像素格式"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADQTABLE=OMFI_ERR: 损坏的 JPEG 量化表"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADRATE=OMFI_ERR: 编辑率的非法值"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADRWLINES=OMFI_ERR: 读取/写入行仅启用于通用视频格式"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADSAMPLEOFFSET=OMFI_ERR: 样本索引偏移超出范围"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADSESSION=OMFI_INTERNAL_ERR: 损坏的 Bento 会话操作"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADSESSIONCLOSE=OMFI_ERR: 容器会话关闭失败"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADSESSIONMETA=OMFI_ERR: 容器会话 meta-handler 操作失败"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADSESSIONOPEN=OMFI_ERR: 容器会话打开失败"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADTIFFCOUNT=OMFI_ERR: 视频: TIFF 值低于 1"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BADWAVEDATA=OMFI_ERR: 错误读取 WAVE 数据"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_CODEC_REV=OMFI_ERR: 缺少日期码"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_FHDL=OMFI_ERR: 损坏的文件处理"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_ITHDL=OMFI_ERR: 损坏的迭代器处理"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_LENGTH=OMFI_ERR: 片段有非法长度"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_MDHDL=OMFI_ERR: 损坏的媒体处理"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_PROP=OMFI_ERR: 属性码超出范围"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_SESSION=OMFI_ERR: 损坏的项目句柄"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_SLOTLENGTH=OMFI_ERR: 损坏的独奏长度"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_SRCH_ITER=OMFI_ERR: 此迭代器操作必须由 omfiMobOpenSearch() 指派"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_STRACKHDL=OMFI_ERR: 损坏的样本轨处理"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_TYPE=OMFI_ERR: 类型码超出范围"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_VARIETY=OMFI_ERR: 错误的格式码可变串"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BAD_VIRTUAL_CREATE=OMFI_ERR: 不允许虚拟对象的创建"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BENTO_HANDLER=OMFI_INTERNAL_ERR: 无法定位 Bento 处理"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BENTO_PROBLEM=OMFI_ERR: Bento 容器错误"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_BLOCKING_SIZE=OMFI_ERR: 块大小必须 >= 0 bytes"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_CANNOT_LOAD_CLSD=OMFI_ERR: 错误加载文件中的分类字典"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_CANNOT_SAVE_CLSD=OMFI_ERR: 错误更新 OMFI 文件中的分类字典"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_CODEC_CHANNELS=OMFI_ERR: 声道超出编码范围"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_CODEC_INVALID=CODEC 无效或没有加载"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_CODEC_NAME_SIZE=OMFI_ERR: 编码器名称字串太长"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_CODEC_SEMANTIC_WARN=OMFI_ERR: 检查媒体时产生了一个语义警告"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_COMPRLINESRD=OMFI_ERR: omfReadLines 不允许压缩"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_COMPRLINESWR=OMFI_ERR: omfWriteLines 不允许压缩"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_CONTAINERWRITE=OMFI_ERR: 错误写入到容器媒体（可能媒体已满）。"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_DATAKIND_EXIST=OMFI_ERR: 一个带有此 ID 的数据种类定义已存在。"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_DATA_IN_SEMANTIC=OMFI_ERR: 在输入数据上语义检查失败"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_DATA_MDES_DISAGREE=OMFI_ERR: 媒体描述摘要数据与媒体不匹配"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_DATA_NONCONTIG=OMFI_ERR: 调用此功能将产生非连续媒体数据"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_DATA_OUT_SEMANTIC=OMFI_ERR: 在输出数据上语义检查失败"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_DECOMPRESS=OMFI_ERR: 软件解压失败"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_DESCLENGTH=OMFI_ERR: 错误获取了文件描述中的长度"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_DESCSAMPRATE=OMFI_ERR: 错误获取了文件描述中的采样率"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_DUPLICATE_MOBID=OMFI_ERR: MobID 已存在于文件内"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_EFFECTDEF_EXIST=OMFI_ERR: 带有此效果 ID 的效果描述已存在"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_END_OF_DATA=OMFI_ERR: 读取到末端数据"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_EOF=OMFI_ERR: 文件末端"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_FILEREV_DIFF=OMFI_ERR: 文件必须有相同文件版本"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_FILEREV_NOT_SUPP=OMFI_ERR: OMFI 文件版本 > 2.0 不支持"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_FILE_NOT_FOUND=OMFI_ERR: 文件未发现。"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_FILE_REV_200=OMFI_ERR: 请使用工具套件 2.0.1 或更新版本来写入 2.x 兼容文件"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_FILL_FOUND=OMFI_ERR: 意外的填充属性被发现"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_IBADMEDIAINDEX=OMFI_ERR(Import): 输入 OMFI 文件缺乏足够媒体对象"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_ILLEGAL_FILEFMT=OMFI_ERR: 错误文件格式编码器"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_ILLEGAL_MEMFMT=OMFI_ERR: 错误的内存格式编码器"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INSUFF_TRAN_MATERIAL=OMFI_ERR: 缺少足够素材作为输入过渡效果"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INTERNAL_BADOBJ=OMFI_INTERNAL_ERR: 错误创建 OMFI/Bento 对象"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INTERNAL_CORRUPTVINFO=OMFI_INTERNAL_ERR: 损坏的视频信息结构"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INTERNAL_DIVIDE=OMFI_ERR: 内部划分错误"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INTERNAL_ITERATOR=OMFI_INTERNAL_ERR: 迭代器内部错误"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INTERNAL_MDO=OMFI_ERR: 内部媒体数据系统未初始化"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INTERNAL_NEG64=OMFI_ERR: 负 64-bit 数"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INTERNAL_UNKNOWN_LOC=OMFI_ERR: 未知定位类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INTERN_TOO_SMALL=OMFI_ERR: 缓存不能足以保持数据"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INULLDESCPTR=OMFI_ERR(Import): GetNthMediaDesc 中的无效描述指示器"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INULLMOBIDPTR=OMFI_ERR(Import): GetNthMediaDesc/SetMediaDesc 中的无效 Mob ID 指示器"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INULLMTPTR=OMFI_ERR(Import): GetNthMediaDesc 中的无效 omfMediaType_t 指示器"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_ATTRIBUTEKIND=OMFI_ERR: 无效的属性种类"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_BOOLTYPE=OMFI_ERR: 无效的布尔值"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_BYTEORDER=OMFI_ERR: 无效的字节顺序"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_CACHE_SIZE=OMFI_ERR: 流缓存大小必须为正数或零"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_CLASS_ID=OMFI_ERR: 无效的对象分类 ID"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_CVAL=OMFI_ERR: 恒定值无效或不存在"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_DATAKIND=OMFI_ERR: 数据类型无效或不存在"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_EDGETYPE=OMFI_ERR: 无效的 Edge Code 格式种类"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_EDITHINT=OMFI_ERR: 无效的效果编辑提示"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_EFFECT=OMFI_ERR: 效果无效或不存在"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_EFFECTARG=OMFI_ERR: 用于此效果的效果参数不再有效"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_EFFECTDEF=OMFI_ERR: 效果定义无效或不存在"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_FILE_MOB=OMFI_ERR: 无效的文件 mob 参考"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_FILMTYPE=OMFI_ERR: 无效的胶片类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_INTERPKIND=OMFI_ERR: 无效的效果插值类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_LINKAGE=OMFI_ERR: 无效的对象附加到属性"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_MOBTYPE=OMFI_ERR: 无效的 Mob 类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_OBJ=OMFI_ERR: 此操作对象无效"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_OP_CODEC=OMFI_ERR: 在此编码的操作无效"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_ROUNDING=OMFI_ERR: Editrate rounding must be either Floor or Ceiling"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_SEARCH_CRIT=OMFI_ERR: 无效的迭代器种类的搜索标准"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_TAPECASETYPE=OMFI_ERR: 无效的磁带盒类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_TAPEFORMATTYPE=OMFI_ERR: 无效的磁带格式类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_TIMECODE=OMFI_ERR: 时间码数值无效"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_TRACKKIND=OMFI_ERR: 无效的轨道类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_TRACK_REF=OMFI_ERR: 不允许绝对的对应轨道参考"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_TRAN_EFFECT=OMFI_ERR: 效果不是一个过渡效果"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_INVALID_VIDEOSIGNALTYPE=OMFI_ERR: 无效的视频信号类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_ITER_WRONG_TYPE=OMFI_ERR: 用于此功能的错误迭代器类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_JPEGBASELINE=OMFI_ERR: 只有基线 JPEG 允许在 OMF 文件内"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_JPEGDISABLED=OMFI_ERR: JPEG 编码已禁用"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_JPEGPCM=OMFI_ERR: OMJPEG.c: put_color_map 已调用"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_JPEGPROBLEM=OMFI_ERR: 未确定的 JPEG 编码问题m"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_LEADING_TRAN=OMFI_ERR: 开始了一段非法的带有过渡效果的序列"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_LRC_BADSAMPLESIZE=OMFI_ERR: 仅 16 位采样支持 LRC"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_LRC_DISABLED=OMFI_ERR: LRC 编码已禁用"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_LRC_MONOONLY=OMFI_ERR: LRC 仅支持一条音频轨"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_MEDIASTREAM_NOTALLOWED=OMFI_ERR: 不允许对象带有媒体流数据类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_MEDIA_CANNOT_CLOSE=OMFI_ERR: 不能关闭媒体"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_MEDIA_NOT_FOUND=OMFI_ERR: 不能定位媒体数据"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_MEDIA_NOT_INIT=OMFI_ERR: omfmInit() 必须在进行本次调用前被调用"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_MEDIA_OPENMODE=OMFI_ERR: 媒体对象在错误模式打开（只读 vs. 读写）"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_MISSING_MEDIA_REP=OMFI_ERR: 媒体图像未存在于 mob 中"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_MISSING_MOBID=OMFI_ERR: MobID 未预备在文件中"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_MISSING_SWAP_PROC=OMFI_ERR: 丢失流交换进程"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_MISSING_TRACKID=OMFI_ERR: TrackID 未存在于 mob 中"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_MOB_NOT_FOUND=OMFI_ERR: Mob 没有存在于此文件中"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_MULTI_WRITELEN=OMFI_ERR: Writelengths 在 writeMultiple 中必须统一"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NEED_PRODUCT_IDENT=OMFI_ERR: 在创建或更新文件时，您必须提供一个产品标识类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOAUDIOCONV=OMFI_ERR: 音频采样读取: 不能转换为所需的采样大小"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOBYTEORDER=OMFI_ERR: 未指定文件字节顺序"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NODATA=OMFI_ERR: 没有数据读取"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOFRAMEINDEX=OMFI_ERR: 不是 JPEG 视频帧索引"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOMEMORY=OMFI_ERR: 内存分配失败，没有更多内存"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOTOMFIFILE=OMFI_ERR: 无效的 OMFI 文件"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOT_A_TRACK=OMFI_ERR: 此功能需要一条轨道，不是 mob 独奏。"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOT_COMPOSITION=OMFI_ERR: 此属性必须是一个合成组合"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOT_FILEMOB=OMFI_ERR: 操作需要文件 mob"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOT_IMPLEMENTED=OMFI_ERR: 未执行"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOT_IN_15=OMFI_ERR: 在 1.x 兼容模式，功能无效"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOT_IN_20=OMFI_ERR: 在 2.x 本地模式，功能无效"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOT_LONGWORD=OMFI_ERR: 此转换的缓冲必须分配长文字"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NOT_SOURCE_CLIP=OMFI_ERR: 此属性必须是一个源素材"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NO_MORE_MOBS=OMFI_ERR: 已达到 mob 末端"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NO_MORE_OBJECTS=OMFI_ERR: 没有更多对象"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NO_TIMECODE=OMFI_ERR: 无法在指定轨道上发现时间码"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NULLBUF=OMFI_ERR: 无效的转换缓冲"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NULLOBJECT=OMFI_ERR: 不允许无效对象"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NULL_CALLBACKFUNC=OMFI_ERR: Callback function to traversal routine is null"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NULL_MATCHFUNC=OMFI_ERR: Match function to traversal routine is null"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NULL_PARAM=OMFI_ERR: 无效的实际参数功能调用"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_NULL_STREAMPROC=OMFI_ERR: 流回调无效"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_OBJECT_SEMANTIC=OMFI_ERR: 在输入对象上检查语义出错"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_OFFSET_SIZE=OMFI_ERR: 64-bit 截断错误"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_ONESAMPLEREAD=OMFI_ERR: 读取压缩数据仅允许一个样本"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_ONESAMPLEWRITE=OMFI_ERR: 写入压缩数据仅允许一个样本"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_OPLIST_OVERFLOW=OMFI_ERR: 操作列表溢出"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_OVERFLOW64=OMFI_ERR: 在 64-bit 上操作有溢出"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_PARSE_EFFECT_AMBIGUOUS=OMFI_ERR: 需要更多信息来解析进一步通过效果"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_PROPID_MATCH=OMFI_INTERNAL_ERR: Property ID code doesn't match between revs"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_PROP_NOT_PRESENT=OMFI_ERR: 文件属性丢失"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_PULLDOWN_DIRECTION=OMFI_ERR: 非法的下变换方向"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_PULLDOWN_FUNC=OMFI_ERR: 下变换使用 omfmMobAddPulldownRef() 替代 omfmMobAddPhysSourceRef()"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_RENDER_NOT_FOUND=OMFI_ERR: 效果不存在"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_REQUIRED_POSITIVE=OMFI_ERR: 值必须是正数或零"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_SINGLE_CHANNEL_OP=OMFI_ERR: 在多通道媒体流中操作无效"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_SMALLBUF=OMFI_ERR: 样本过大而无法放入指定的缓冲中"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_SOURCEMOBLIST=OMFI_ERR: 错误处理源 mob 列表"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_STILLFRAME_BADLENGTH=OMFI_ERR: 媒体编组中静帧长度必须为 1"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_STRACK_APPEND_ILLEGAL=OMFI_ERR: 此轨道不能包含序列，附加是非法的"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_STREAM_CLOSED=OMFI_ERR: 此操作流必须打开"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_STREAM_REOPEN=OMFI_ERROR: 流没有被关闭而重新打开"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_SWAB=OMFI_ERR: 不能刷新数据大小"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_SWABBUFSIZE=OMFI_ERR: 刷新缓冲大小无效"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_SWAP_SETUP=OMFI_ERR: 在调用此功能前需要设置文件与内存格式"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TABLE_BAD_HDL=OMFI_INTERNAL_ERR: 损坏的表处理"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TABLE_BAD_ITER=OMFI_INTERNAL_ERR: 损坏的表迭代器处理"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TABLE_DUP_KEY=OMFI_INTERNAL_ERR: 内部表中检测到重复的键"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TABLE_MISSING_COMPARE=OMFI_INTERNAL_ERR: 丢失表中的比较功能"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TEST_FAILED=OMFI_TESTING_ERR: 测试失败"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TIFFVERSION=OMFI_ERR: 错误读取 tiff 版本"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TIMECODE_NOT_FOUND=OMFI_ERR: 时间码未在 mob 链中发现"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TOO_MANY_FMT_OPS=OMFI_ERROR: 此编码指定了过多格式"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TOO_MANY_TYPES=OMFI_ERR: 一个单独属性过多类型"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TRACK_EXISTS=OMFI_ERR: 一个带有此轨道 ID 的轨道已存在"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TRACK_NOT_FOUND=OMFI_ERR: 轨道未发现"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TRANSLATE=OMFI_ERR: 不能转换为预期记忆格式"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TRANSLATE_NON_INTEGRAL_RATE=OMFI_ERR: 编码器不是倍数。不能转换比率"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TRANSLATE_SAMPLE_SIZE=OMFI_ERR: 编码器不能转换采样大小"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TRAVERSAL_NOT_POSS=OMFI_ERR: Mob 穿越失败"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_TYPE_SEMANTIC=OMFI_ERR: 属性与类型不匹配"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_USE_MULTI_CREATE=OMFI_ERR: 使用 multiCreate 来创建更多交错通道"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_WRONG_FILETYPE=OMFI_ERR: 无效的文件类型 (Raw vs. OMFI)"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_WRONG_MEDIATYPE=OMFI_ERR: 用于此操作的媒体类型不正确"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_WRONG_OPENMODE=OMFI_ERR: 文件打开于错误模式中（只读 vs. 读写）"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_XFER_DUPCH=OMFI_ERR: 不能在 multi-xfers 中二次指定相同声道"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_XFER_NOT_BYTES=OMFI_ERR: 采样转换必须是字节整数"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_ZERO_DIVIDE=OMFI_ERR: 由零划分"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_ZERO_PIXELSIZE=OMFI_ERR: 不允许像素大小为零"
"$$$/app/sessionHost/OMF_Errors/OM_ERR_ZERO_SAMPLESIZE=OMFI_ERR: 不允许样本大小为零"
"$$$/app/sessionHost/OMF_Errors/OpenFileError=无法打开所需文件。"
"$$$/app/sessionHost/OMF_Errors/UnsupportedBitDepth=不支持的位深度。"
"$$$/app/sessionHost/OMF_Errors/UnsupportedSampleRate=不支持的采样率。"
"$$$/app/sessionHost/OMF_Progress/CheckingMediaFiles=正在验证媒体文件"
"$$$/app/sessionHost/OMF_Progress/ConvertingMediaFile=正在转换媒体文件"
"$$$/app/sessionHost/OMF_Progress/ConvertingOMFFile=正在转换 OMF 文件"
"$$$/app/sessionHost/OMF_Progress/ConvertingSoundFile=正在转换声音文件"
"$$$/app/sessionHost/OMF_Progress/ExtractingSoundData=正在提取声音数据"
"$$$/app/sessionHost/OMF_Progress/FinishingExport=正在完成导出"
"$$$/app/sessionHost/OMF_Progress/MakingCompositionTracks=制作合成轨"
"$$$/app/sessionHost/OMF_Progress/MakingGainControlPoints=制作增益控制点"
"$$$/app/sessionHost/OMF_Progress/MakingMediaObjEncapsulating=制作媒体对象（封装音频）"
"$$$/app/sessionHost/OMF_Progress/MakingMediaObjReference=制作媒体对象参考"
"$$$/app/sessionHost/OMF_Progress/MakingTapeReels=制作磁带卷"
"$$$/app/sessionHost/OMF_Warnings/CreateAIFFFileFailed=创建 AIFF 文件失败。"
"$$$/app/sessionHost/OMF_Warnings/EncapsulatedStereo=不支持已封装立体声文件在 OMF 文件中。"
"$$$/app/sessionHost/OMF_Warnings/EncapsulatedWave=此 OMF 文件包含的音频媒体封装带有版权。媒体将不被提取。"
"$$$/app/sessionHost/OMF_Warnings/FailureOpeningFile=打开文件失败。"
"$$$/app/sessionHost/OMF_Warnings/FileHasNoSoundData=文件没有声音数据。"
"$$$/app/sessionHost/OMF_Warnings/IncompatibleOMF=此 OMF 可能与 Avid 产品不兼容。"
"$$$/app/sessionHost/OMF_Warnings/InsufficientSourceMedia=素材时间长度比源更长。"
"$$$/app/sessionHost/OMF_Warnings/MissingSourceFile=一个源文件丢失。"
"$$$/app/sessionHost/OMF_Warnings/NegativeStartOffset=开始时间偏移为负数。这将更改为零。"
"$$$/app/sessionHost/OMF_Warnings/NoMediaFound=未发现媒体。"
"$$$/app/sessionHost/OMF_Warnings/NoTracksInImportFile=此 OMF 文件中没有轨道。"
"$$$/app/sessionHost/progress/ConvertingAutomationData=正在转换自动数据"
"$$$/app/sessionHost/progress/ConvertingClips=正在转换素材"
"$$$/app/sessionHost/progress/ConvertingTracks=正在转换轨道"
"$$$/auUI/Advanced=高级"
"$$$/aucore/MusicalNotes/A=A"
"$$$/aucore/MusicalNotes/B=B"
"$$$/aucore/MusicalNotes/C=C"
"$$$/aucore/MusicalNotes/D=D"
"$$$/aucore/MusicalNotes/E=E"
"$$$/aucore/MusicalNotes/F=F"
"$$$/aucore/MusicalNotes/G=G"
"$$$/aucui/AutoPitchCorrectView/CentsSuffix= cents"
"$$$/aucui/GenerateTonesEditorView/End=结束"
"$$$/aucui/GenerateTonesEditorView/Start=开始"
"$$$/aui/AboutBoxDialog/Build=内部版本 @0"
"$$$/aui/AboutBoxDialog/Version=版本 @0"
"$$$/aui/Advanced=高级"
"$$$/aui/AlignSpeechWithRubbaDubDialog/Title=Automatic Speech Alignment"
"$$$/aui/AmplitudeRuler/DecibelFormat=分贝"
"$$$/aui/AmplitudeRuler/NormalFormat=标准化值"
"$$$/aui/AmplitudeRuler/PercentFormat=百分比"
"$$$/aui/AmplitudeRuler/SamplesFormat=采样值"
"$$$/aui/AmplitudeRuler/ZoomIn=放大 （振幅）"
"$$$/aui/AmplitudeRuler/ZoomOut=缩小 （振幅）"
"$$$/aui/AmplitudeRuler/ZoomReset=缩放重置 （振幅）"
"$$$/aui/AmplitudeStatisticsPanel/ITULoudnessText=@0 LUFS"
"$$$/aui/AmplitudeStatisticsPanel/ScanSelectionTT=扫描选区"
"$$$/aui/AmplitudeStatisticsPanel/ScanSelectionWithKeyTT=扫描选区 (@0)"
"$$$/aui/AmplitudeStatisticsPanel/ScanTT=扫描"
"$$$/aui/AmplitudeStatisticsPanel/ScanWithKeyTT=扫描 (@0)"
"$$$/aui/AmplitudeStatisticsPanel/SelectionTooShort=(选区太短)"
"$$$/aui/AnalysisEffectXML/ClearFixedButton=清除已修复"
"$$$/aui/AnalysisEffectXML/Effect=效果:"
"$$$/aui/AnalysisEffectXML/FixAllButton=全部修复"
"$$$/aui/AnalysisEffectXML/FixButton=修复"
"$$$/aui/AnalysisEffectXML/ScanButton=扫描"
"$$$/aui/AnalysisEffectXML/SettingsButton=设置"
"$$$/aui/AnalysisEffectXML/Warning=效果设置已更改。再次扫描以更新结果列表。"
"$$$/aui/AnalysisEffectXML/Warning1=效果设置已更改。再次扫描以更新结果列表。"
"$$$/aui/AnalysisEffectXML/Warning2=文件持续时间已更改。再次扫描以更新结果列表。"
"$$$/aui/AnalysisEffectXML/Warning3=效果设置与文件持续时间已更改。再次扫描以更新结果列表。"
"$$$/aui/AnalysisEffectXML/ZoomInButtonTT=选区放大比率开关"
"$$$/aui/AnalyzeEffectXML/AnalyzeTT=问题扫描使用选中的修复效果"
"$$$/aui/AnalyzeEffectXML/ClearFixedTT=清除列表中的已修复问题"
"$$$/aui/AnalyzeEffectXML/DeletePresetTT=删除预设"
"$$$/aui/AnalyzeEffectXML/FixAllTT=修复所有问题"
"$$$/aui/AnalyzeEffectXML/FixlTT=修复选中的问题"
"$$$/aui/AnalyzeEffectXML/PopupTT=修复效果的有效列表"
"$$$/aui/AnalyzeEffectXML/PresetPopupTT=已选中分析效果的有效预设"
"$$$/aui/AnalyzeEffectXML/SaveAsAPresetTT=保存设置为预设"
"$$$/aui/AnalyzeEffectXML/SettingsTT=打开/关闭效果参数段""
"$$$/aui/Application/CDLayoutFilterDescription=Audition CD Layout"
"$$$/aui/Application/ImportFile=导入文件"
"$$$/aui/Application/ImportRawData=导入Raw数据"
"$$$/aui/Application/InstallingSessionTemplates=正在套用项目模板..."
"$$$/aui/Application/OpenAppendToCurrent=追加打开到当前"
"$$$/aui/Application/OpenAppendToNew=追加打开到新建"
"$$$/aui/Application/OpenFile=打开文件"
"$$$/aui/Application/OpenFile/AllFiles=所有文件"
"$$$/aui/Application/OpenFile/AllSupportedMedia=所有支持的媒体"
"$$$/aui/Application/RepeatLastCommand=重复执行上次的操作(&L)"
"$$$/aui/Application/RepeatLastCommandNamed=重复执行上次的操作 [@0](&L)"
"$$$/aui/ApplicationInitializer/BothTempDirsLowOnSpace=@APPNAME 的主和次临时文件夹的磁盘空间过低。推荐释放有关磁盘空间或指定不同的磁盘。您是否打算复查 @APPNAME 的磁盘缓存参数设置？"
"$$$/aui/ApplicationInitializer/DirectWriteAllOutOfSpace=目标磁盘已满。"
"$$$/aui/ApplicationInitializer/DirectWriteLowSpace=目标磁盘空间已用完。建议清理空间或使用其他的分区。"
"$$$/aui/ApplicationInitializer/FileSystemCacheOverload=@APPNAME 无法处理此磁盘IO的负载。如果要录音，请用尽可能少的声轨，或者使用更快的磁盘。"
"$$$/aui/ApplicationInitializer/FileSystemIOError=@APPNAME 在读取磁盘时遇到一个错误。建议您保存工作并重启 Audition。"
"$$$/aui/ApplicationInitializer/FoundRecoveryData=一个先前的 Audition 项目意外退出。您可以立即继续操作，或删除它，或取消，在其他时间继续此项目。"
"$$$/aui/ApplicationInitializer/FoundRecoveryDataWithDate=一个先前的 Audition 项目意外退出。这个项目开始于 @0。您可以立即继续操作，或删除它，或取消，在其他时间继续此项目。"
"$$$/aui/ApplicationInitializer/FoundRecoveryData_CancelButton=取消"
"$$$/aui/ApplicationInitializer/FoundRecoveryData_ContinueButton=继续"
"$$$/aui/ApplicationInitializer/FoundRecoveryData_DeleteButton=删除"
"$$$/aui/ApplicationInitializer/InitAppComponentsTextEmpty=正在初始化应用程序组件... "
"$$$/aui/ApplicationInitializer/InitAppComponentsTextFull=正在初始化应用程序组件... (@0)"
"$$$/aui/ApplicationInitializer/Initialize/App=App"
"$$$/aui/ApplicationInitializer/Initialize/BE=BE"
"$$$/aui/ApplicationInitializer/Initialize/CR=CR"
"$$$/aui/ApplicationInitializer/Initialize/DSP=DSP"
"$$$/aui/ApplicationInitializer/Initialize/Script=Script"
"$$$/aui/ApplicationInitializer/Initialize/UI=UI"
"$$$/aui/ApplicationInitializer/NoFailsafeTempDir=没有磁盘缓存位置被确定。请检查您的系统临时文件目录是否被锁定或损坏。"
"$$$/aui/ApplicationInitializer/PrimaryTempDirsLowOnSpace=@APPNAME 的主临时文件夹的磁盘空间过低。推荐释放有关磁盘空间或指定不同的磁盘。您是否打算复查 @APPNAME 的磁盘缓存参数设置？"
"$$$/aui/ApplicationInitializer/RecoveryFailed=Audition 无法使用您的崩溃恢复数据。这可能表明崩溃恢复数据不兼容或无效。按“确定”退出 Audition。"
"$$$/aui/ApplicationInitializer/RecoveryFailedForOneDoc=1 个文件无法被恢复。"
"$$$/aui/ApplicationInitializer/RecoveryFailedForSomeDocs=@0 个文件无法被恢复。"
"$$$/aui/ApplicationInitializer/SecondaryTempDirsLowOnSpace=@APPNAME 的次临时文件夹的磁盘空间过低。推荐释放有关磁盘空间或指定不同的磁盘。您是否打算复查 @APPNAME 的磁盘缓存参数设置？"
"$$$/aui/ApplicationInitializer/TempFileSystemFull=@APPNAME 已经达到其所能打开的音频文件的极限。请关掉一些文件。"
"$$$/aui/ApplicationInitializer/TempFolderProblem=@APPNAME 的主临时文件夹找不到。请复查 @APPNAME 的磁盘缓存参数设置。"
"$$$/aui/AudioChannelMappingPrefsPage/DeviceChannels=设备声道"
"$$$/aui/AudioChannelMappingPrefsPage/FileChannels=文件声道"
"$$$/aui/AudioChannelMappingPrefsPage/InputChannelRowName=@0 [@1]@2"
"$$$/aui/AudioChannelMappingPrefsPage/Mono= (单声道)"
"$$$/aui/AudioChannelMappingPrefsPage/OutputChannelRowName=@0 [@1]"
"$$$/aui/AudioClipNode/AddRemoveEffects=添加/移除效果"
"$$$/aui/AudioClipNode/AutomaticCrossfadesEnabled=自动淡化已启用"
"$$$/aui/AudioClipNode/ClipGain=@0 dB"
"$$$/aui/AudioClipNode/CrossFadeLinkType/Asymmetrical=非对称"
"$$$/aui/AudioClipNode/CrossFadeLinkType/Symmetrical=对称"
"$$$/aui/AudioClipNode/Crossfade=淡入淡出"
"$$$/aui/AudioClipNode/Fade/Cosine=余弦"
"$$$/aui/AudioClipNode/Fade/Linear=线性"
"$$$/aui/AudioClipNode/FadeIn=淡入"
"$$$/aui/AudioClipNode/FadeOut=淡出"
"$$$/aui/AudioClipNode/NoFade=不淡化"
"$$$/aui/AudioClipNode/RackInput=效果架输入"
"$$$/aui/AudioClipNode/RackMix=效果架混合"
"$$$/aui/AudioClipNode/RackOutput=效果架输出"
"$$$/aui/AudioClipNode/RackPower=效果架开关"
"$$$/aui/AudioSourceSequenceEditor/ApplyAudioFadeInAction=淡入"
"$$$/aui/AudioSourceSequenceEditor/ApplyAudioFadeOutAction=淡出"
"$$$/aui/AudioSourceSequenceEditor/CreatNoiseReductionAction=降噪"
"$$$/aui/AudioSourceSequenceEditor/CreateNormalizeAction=标准化"
"$$$/aui/AudioSourceSequenceEditor/CreateRecordAction=录制"
"$$$/aui/AudioSourceSequenceEditor/CreateReverseAction=前后反向"
"$$$/aui/AudioSourceSequenceEditor/CreateSilenceAction=静默"
"$$$/aui/AudioSourceSequenceEditor/CropAudioAction=裁剪音频"
"$$$/aui/AudioSourceSequenceEditor/CutAudioAction=剪切音频"
"$$$/aui/AudioSourceSequenceEditor/DeleteAudioAction=删除音频"
"$$$/aui/AudioSourceSequenceEditor/InsertSilenceAction=插入静默"
"$$$/aui/AudioSourceSequenceEditor/InvertAction=上下反转"
"$$$/aui/AudioSourceSequenceEditor/MixPasteAction=混合式粘贴"
"$$$/aui/AudioSourceSequenceEditor/PasteAudioAction=粘贴音频"
"$$$/aui/AudioSourceSequenceEditor/Repair=自动修复"
"$$$/aui/AudioSourceSequenceEditor/SilenceFrequencies=静默频率"
"$$$/aui/AudioTrackControlsView/ResetValue=重设值"
"$$$/aui/AuditionPrivateFilePropDefsXML=文件属性"
"$$$/aui/AuditionPrivateFilePropDefsXML/bit_depth_description=每个采样的信息位数"
"$$$/aui/AuditionPrivateFilePropDefsXML/bit_depth_label=位深度"
"$$$/aui/AuditionPrivateFilePropDefsXML/channels_description=文件内的声道数量或类型"
"$$$/aui/AuditionPrivateFilePropDefsXML/channels_label=声道"
"$$$/aui/AuditionPrivateFilePropDefsXML/disk_size_description=存储于磁盘上的文件实际大小"
"$$$/aui/AuditionPrivateFilePropDefsXML/disk_size_label=在磁盘上的大小"
"$$$/aui/AuditionPrivateFilePropDefsXML/duration_description=音频时间长度"
"$$$/aui/AuditionPrivateFilePropDefsXML/duration_label=持续时间"
"$$$/aui/AuditionPrivateFilePropDefsXML/file_modified_description=文件最后修改的日期与时间"
"$$$/aui/AuditionPrivateFilePropDefsXML/file_modified_label=修改"
"$$$/aui/AuditionPrivateFilePropDefsXML/file_path_description=文件在磁盘上的实际路径"
"$$$/aui/AuditionPrivateFilePropDefsXML/file_path_label=文件路径"
"$$$/aui/AuditionPrivateFilePropDefsXML/filename_description=文件名称"
"$$$/aui/AuditionPrivateFilePropDefsXML/filename_label=名称"
"$$$/aui/AuditionPrivateFilePropDefsXML/frame_rate_description=每秒的视频帧数"
"$$$/aui/AuditionPrivateFilePropDefsXML/frame_rate_label=帧速率"
"$$$/aui/AuditionPrivateFilePropDefsXML/media_type_description=文件内容的媒体类型描述"
"$$$/aui/AuditionPrivateFilePropDefsXML/media_type_label=媒体类型"
"$$$/aui/AuditionPrivateFilePropDefsXML/metadata_modified_description=最后更改的资源的日期和时间"
"$$$/aui/AuditionPrivateFilePropDefsXML/metadata_modified_label=XMP 修改"
"$$$/aui/AuditionPrivateFilePropDefsXML/sample_rate_description=每秒采样的音频数"
"$$$/aui/AuditionPrivateFilePropDefsXML/sample_rate_label=采样率"
"$$$/aui/AuditionPrivateFilePropDefsXML/source_format_description=存储于文件内的音频来源描述"
"$$$/aui/AuditionPrivateFilePropDefsXML/source_format_label=源格式"
"$$$/aui/AuditionPrivateFilePropDefsXML/uncompressed_size_description=音频数据的未压缩尺寸"
"$$$/aui/AuditionPrivateFilePropDefsXML/uncompressed_size_label=未压缩音频大小"
"$$$/aui/AuditionPrivateFilePropDefsXML_description=关于活动文件的非编辑文件信息"
"$$$/aui/AutoSaved=_AutoSaved"
"$$$/aui/AutomationLaneTrackControls/AddKeyframe=添加关键帧"
"$$$/aui/AutomationLaneTrackControls/DeleteKeyframe=删除关键帧"
"$$$/aui/BaseSaveAsDialogController/CouldNotSaveFile=无法保存文件。\n原因: @0"
"$$$/aui/BaseSaveAsDialogController/PleasePickADestinationFolderMsg=选择保存的位置。"
"$$$/aui/BaseSaveAsDialogController/SaveAs=另存为"
"$$$/aui/Batch/ExportSettingsNotSet=您选择导出文件但没有指定任何导出设置。点击确定使用默认设置。点击取消终止操作并选择导出设置。#{endl}#{endl}提示：如果您不需要导出文件，不选 \"Export\"."
"$$$/aui/BatchProcessExportDialog/ChangeSampleTypeInfoTT=Shows the sample type changes that will be applied to all files in the panel.  Click the Change button to choose new sample type settings."
"$$$/aui/BatchProcessExportDialog/FilenameTemplateTT=Enter the template to be used when creating the batch filenames: %n:current name, %a:artist, %d:album, %s:song, %t:track#, %g:genre, %y:year"
"$$$/aui/BatchProcessExportDialog/NewSampleTypeInfoTT=Shows the resulting sample type(s) among all files in the panel after the above sample type conversion has been applied."
"$$$/aui/BatchProcessExportDialog/PleasePickADestinationFolderExportMsg=请挑选一个导出位置。"
"$$$/aui/BatchProcessExportDialog/UnsupportedFormat=不受支持的格式。"
"$$$/aui/BatchProcessExportDialogXML/Filename=文件名:"
"$$$/aui/BatchProcessExportDialogXML/OK=确定"
"$$$/aui/BatchProcessExportDialogXML/Postfix=文件名后缀:"
"$$$/aui/BatchProcessExportDialogXML/Prefix=文件名前缀:"
"$$$/aui/BatchProcessExportDialogXML/PrefixPostfix=前缀/后缀"
"$$$/aui/BatchProcessExportDialogXML/Template=模板"
"$$$/aui/BatchProcessExportDialogXML/TemplateLabel=模板:"
"$$$/aui/BatchProcessPanel/BatchProcess=批处理"
"$$$/aui/BatchProcessPanel/Cancel=取消"
"$$$/aui/BatchProcessPanel/ExportFormat=导出格式"
"$$$/aui/BatchProcessPanel/ExportLocation=导出位置"
"$$$/aui/BatchProcessPanel/ExportName=导出名称"
"$$$/aui/BatchProcessPanel/ExportSampleType=导出采样类型"
"$$$/aui/BatchProcessPanel/FilePathTooLongAlert=批处理因为一个或多个选中文件的名称或路径太长而不能继续。调整导出设置后再试。"
"$$$/aui/BatchProcessPanel/FilesHaveAlerts=批处理因为一个或多个选中的文件出现警告信息而不能继续。清除警告信息后再试。"
"$$$/aui/BatchProcessPanel/FilesRecordingAlert=批处理因为一个或多个选中的文件正忙于录制而不能继续。录制完成后再试。"
"$$$/aui/BatchProcessPanel/Name=名称"
"$$$/aui/BatchProcessPanel/RemoveAllFiles=移除所有文件"
"$$$/aui/BatchProcessPanel/RemoveFile=移除 \"@0\""
"$$$/aui/BatchProcessPanel/RemoveSelectedFiles=移除选中文件"
"$$$/aui/BatchProcessPanel/SampleType=采样类型"
"$$$/aui/BatchProcessPanel/Stage=步骤"
"$$$/aui/BatchProcessPanel/Status=状态"
"$$$/aui/BatchProcessPanel/Undo=撤销"
"$$$/aui/BeatsSymbol=节拍"
"$$$/aui/BurnAudioDialog/DeviceClosed=The optical recording device is closed."
"$$$/aui/BurnAudioDialog/DrivesChangedPrefix=The drives list has changed.  "
"$$$/aui/BurnAudioDialog/GatheringDriveInfo=Gathering drive information..."
"$$$/aui/BurnAudioDialog/MediaKindUnknown=The device media kind (CD, DVD, BD, ...) could not be determined."
"$$$/aui/BurnAudioDialog/MediaNotCDKind=The media found in the device was not CD media.  Insert blank recordable CD media, close the tray, then try again."
"$$$/aui/BurnAudioDialog/MediaNotFound=No media was found in the device.  Insert blank recordable CD media, close the tray, then try again."
"$$$/aui/BurnAudioDialog/MediaNotWritable=The media in the device cannot be written to.  Insert blank recordable CD media, close the tray, then try again."
"$$$/aui/BurnAudioDialog/MediaStateUnknown=The device media state could not be determined."
"$$$/aui/BurnAudioDialog/NoDevices=No optical recording devices were found."
"$$$/aui/BurnAudioDialog/OpenFailed=The optical recording device failed to open."
"$$$/aui/BurnAudioDialog/ReadyToWrite=Recordable CD media was found in the device, and the device is ready to burn audio."
"$$$/aui/BurnAudioDialog/TrayOpen=The device tray is open.  Insert blank recordable CD media, close the tray, then try again."
"$$$/aui/BurnAudioDialog/TrayStateUnknown=The device tray state could not be determined."
"$$$/aui/BurnAudioDialog/UnknownError=Unknown error."
"$$$/aui/BurnAudioToCDDialog/Copies=Copies:"
"$$$/aui/BurnAudioToCDDialog/EjectWhenComplete=Eject CD when complete"
"$$$/aui/BurnAudioToCDDialog/SpeedTemplate=99x (99999 kbps)"
"$$$/aui/BurnAudioToCDDialog/Status=Status:"
"$$$/aui/BurnAudioToCDDialog/Verify=Verify CD after burning"
"$$$/aui/BurnAudioToCDDialog/WriteMode=Write Mode:"
"$$$/aui/CD/Arranger=Arranger"
"$$$/aui/CD/Artist=Artist"
"$$$/aui/CD/CDStatus=Duration: @0 min / 78 min   |   Space: @1 / @2"
"$$$/aui/CD/Composer=Composer"
"$$$/aui/CD/Duration=Duration"
"$$$/aui/CD/End=End"
"$$$/aui/CD/EntireFile=Entire File"
"$$$/aui/CD/ExceedsLimit=The combined duration of the audio tracks on this CD exceeds the limit"
"$$$/aui/CD/ExceedsTrackCount=The audio track count exceeds the limit of 99"
"$$$/aui/CD/Genre=Genre"
"$$$/aui/CD/GenreCode=Genre Code"
"$$$/aui/CD/ISRC=ISRC"
"$$$/aui/CD/InPoint=In Point"
"$$$/aui/CD/Message=Message"
"$$$/aui/CD/Pause=Pause"
"$$$/aui/CD/PauseTooltip=Enter the pause amount for this track (hh:mm:ss:ff)"
"$$$/aui/CD/RebootWarning=If you have not rebooted your computer since Audition was installed, we suggest doing so to avoid potential problems burning audio to CD.  Click OK to attempt to burn a CD now."
"$$$/aui/CD/Selection=Selection"
"$$$/aui/CD/Songwriter=Songwriter"
"$$$/aui/CD/Source=Source"
"$$$/aui/CD/Start=Start"
"$$$/aui/CD/Title=Title"
"$$$/aui/CD/Track=Track"
"$$$/aui/CD/TrackIsLessThan4Seconds=This track is less than 4 seconds, and cannot be burned to a CD in this state."
"$$$/aui/CDDocumentController/AssetsBusy=Audition cannot burn the CD while the file, or one of the audio files it refers to, is busy."
"$$$/aui/CDDocumentController/CDTrackMarkersWarning=This CD Layout contains references to unsaved audio files which contain CD Track markers.  CD Track markers must be saved with the source audio files in order for them to be saved as tracks in a CD Layout."
"$$$/aui/CDDocumentController/TooManyTracks=There is a limit of 99 CD tracks per disc.  Please remove tracks to reduce the track count."
"$$$/aui/CDDocumentController/TooMuchAudioToBurn=The combined duration of the audio tracks on this CD exceeds the limit.  Please remove tracks to shorten the duration."
"$$$/aui/CDEditorView/BurnAudioToCD=Burn Audio to CD..."
"$$$/aui/CDEditorView/CDLayoutProperties=CD Layout Properties..."
"$$$/aui/CDEditorView/DeleteAll=Remove All CD Tracks"
"$$$/aui/CDEditorView/DeleteSelected=Remove Selected CD Tracks"
"$$$/aui/CDEditorView/DragAndDropHere=Drag and drop files or CD Track range markers here"
"$$$/aui/CDEditorView/EditSourceFile=Edit Source File"
"$$$/aui/CDEditorView/Game=Game"
"$$$/aui/CDEditorView/SetDefaultPause=Change default pause between tracks..."
"$$$/aui/CDPropertiesView/Duration=@0 min / 78 min"
"$$$/aui/CDPropertiesView/Space=@0 / @1"
"$$$/aui/CDSaveAsDialog/FilterDescription=Audition CD Layout"
"$$$/aui/CDSaveAsDialog/FilterDescriptionFull=Audition CD Layout (*.cdlx)"
"$$$/aui/ChannelPrefix=声道 "
"$$$/aui/ClickPopXML/Complexity=复杂性:"
"$$$/aui/ClickPopXML/Threshold=阈值:"
"$$$/aui/ClipColorDialog/ClipColor=素材颜色"
"$$$/aui/ClipColorDialog/GroupColor=编组颜色"
"$$$/aui/ClipColorDialogXML/ResetAllTT=重置所有颜色预设为默认值。这不会影响您已选中的素材。"
"$$$/aui/ClipColorXML/Cancel=取消"
"$$$/aui/ClipColorXML/OK=确定"
"$$$/aui/ClipDurationChangedAlert=警告：此素材由于源媒体更改已取消同步（单击解除）"
"$$$/aui/ClipMoveCapture/ContextDrag/Cancel=取消"
"$$$/aui/ClipMoveCapture/ContextDrag/CopyHere=复制到这里"
"$$$/aui/ClipMoveCapture/ContextDrag/CopyUniqueHere=复制唯一到这里"
"$$$/aui/ClipMoveCapture/ContextDrag/MoveHere=移动到这里"
"$$$/aui/ClipNode/ClipOfflineLabel=脱机"
"$$$/aui/ClipNode/DismissAllWarningsForFile=解除文件 '@0' 的所有警告"
"$$$/aui/ClipNode/DismissAllWarningsForSession=解除项目 '@0' 的所有警告"
"$$$/aui/ClipNode/DismissWarning=解除警告"
"$$$/aui/ClipPropertiesView/Dims=@0x@1 (@2)"
"$$$/aui/ClipPropertiesView/InfoClipOffline=信息(素材脱机)"
"$$$/aui/ClipPropertiesView/LinkMedia=链接媒体..."
"$$$/aui/ClipPropertiesView/SetClipGain=设置素材增益"
"$$$/aui/ClipTrackView/ClipMenu/AlignWithRubbaDub=Automatic Speech Alignment..."
"$$$/aui/ClipTrackView/ClipMenu/BounceBusToNewTrack=内部缩混总线声轨为新建声轨"
"$$$/aui/ClipTrackView/ClipMenu/BounceMasterToNewTrack=内部缩混主控声轨为新建声轨"
"$$$/aui/ClipTrackView/ClipMenu/BounceToNewTrack=内部缩混到新建声轨"
"$$$/aui/ClipTrackView/ClipMenu/BounceToNewTrack/SelectedClipsInTimeSel=时间选区内选中的素材"
"$$$/aui/ClipTrackView/ClipMenu/BounceToNewTrack/SelectedTrack=已选中声轨"
"$$$/aui/ClipTrackView/ClipMenu/BounceToNewTrack/TimeSelection=时间选区"
"$$$/aui/ClipTrackView/ClipMenu/BounceToNewTrackSelectedClipsOnly=仅选中的素材"
"$$$/aui/ClipTrackView/ClipMenu/ChangeStretchModeOff=关闭"
"$$$/aui/ClipTrackView/ClipMenu/ChangeStretchModeRealtime=实时"
"$$$/aui/ClipTrackView/ClipMenu/ChangeStretchModeRendered=已渲染"
"$$$/aui/ClipTrackView/ClipMenu/ClipColor=素材/编组颜色..."
"$$$/aui/ClipTrackView/ClipMenu/ClipGain=素材增益"
"$$$/aui/ClipTrackView/ClipMenu/ClipSendToBack=素材置为底层"
"$$$/aui/ClipTrackView/ClipMenu/ConvertToUniqueCopy=转换为唯一拷贝"
"$$$/aui/ClipTrackView/ClipMenu/Copy=复制"
"$$$/aui/ClipTrackView/ClipMenu/Cut=剪切"
"$$$/aui/ClipTrackView/ClipMenu/Delete=删除"
"$$$/aui/ClipTrackView/ClipMenu/DeleteTrack=删除已选中的声道"
"$$$/aui/ClipTrackView/ClipMenu/DuplicateTrack=复制已选中的声道"
"$$$/aui/ClipTrackView/ClipMenu/EditSourceFile=编辑源文件"
"$$$/aui/ClipTrackView/ClipMenu/EntireSession=整个项目"
"$$$/aui/ClipTrackView/ClipMenu/EntireSessionDots=整个项目..."
"$$$/aui/ClipTrackView/ClipMenu/ExportMixdown=导出缩混"
"$$$/aui/ClipTrackView/ClipMenu/GroupClips=编组素材"
"$$$/aui/ClipTrackView/ClipMenu/Groups=编组"
"$$$/aui/ClipTrackView/ClipMenu/Insert=插入"
"$$$/aui/ClipTrackView/ClipMenu/InsertClip/Files=文件..."
"$$$/aui/ClipTrackView/ClipMenu/InsertTrack/Add51AudioTrack=添加 5.1 声轨"
"$$$/aui/ClipTrackView/ClipMenu/InsertTrack/Add51BusTrack=添加 5.1 总音轨"
"$$$/aui/ClipTrackView/ClipMenu/InsertTrack/AddMonoAudioTrack=添加单声道声轨"
"$$$/aui/ClipTrackView/ClipMenu/InsertTrack/AddMonoBusTrack=添加单声道总线声轨"
"$$$/aui/ClipTrackView/ClipMenu/InsertTrack/AddStereoAudioTrack=添加立体声声轨"
"$$$/aui/ClipTrackView/ClipMenu/InsertTrack/AddStereoBusTrack=添加立体声总线声轨"
"$$$/aui/ClipTrackView/ClipMenu/InsertTrack/AddVideoTrack=添加视频轨"
"$$$/aui/ClipTrackView/ClipMenu/LinkMedia=链接媒体..."
"$$$/aui/ClipTrackView/ClipMenu/LockInTime=锁定时间"
"$$$/aui/ClipTrackView/ClipMenu/Loop=循环"
"$$$/aui/ClipTrackView/ClipMenu/MatchClipVolume=匹配素材音量..."
"$$$/aui/ClipTrackView/ClipMenu/Metronome=节拍器"
"$$$/aui/ClipTrackView/ClipMenu/MixdownToNewFile=缩混项目为新文件"
"$$$/aui/ClipTrackView/ClipMenu/Mute=静音"
"$$$/aui/ClipTrackView/ClipMenu/Paste=粘贴"
"$$$/aui/ClipTrackView/ClipMenu/RemoveFocusClipFromGroup=从编组移除焦点素材"
"$$$/aui/ClipTrackView/ClipMenu/RenameClip=重命名"
"$$$/aui/ClipTrackView/ClipMenu/RevealClipsInFilesPanel=在文件面板中显示素材"
"$$$/aui/ClipTrackView/ClipMenu/RippleDelete=波纹删除"
"$$$/aui/ClipTrackView/ClipMenu/RippleDelete/SelectedClips=已选中素材"
"$$$/aui/ClipTrackView/ClipMenu/RippleDelete/TimeSelectionInAllTracks=所有轨道内的时间选区"
"$$$/aui/ClipTrackView/ClipMenu/RippleDelete/TimeSelectionInSelectedClips=选中素材内的时间选区"
"$$$/aui/ClipTrackView/ClipMenu/RippleDelete/TimeSelectionInSelectedTrack=选中轨道内的时间选区"
"$$$/aui/ClipTrackView/ClipMenu/SelectAllClipsInTrack=选择轨道内所有素材"
"$$$/aui/ClipTrackView/ClipMenu/SelectClipsToEndOfTrack=选择到声轨结束的素材"
"$$$/aui/ClipTrackView/ClipMenu/Silence=静音..."
"$$$/aui/ClipTrackView/ClipMenu/Split=拆分"
"$$$/aui/ClipTrackView/ClipMenu/Stretch=伸缩"
"$$$/aui/ClipTrackView/ClipMenu/StretchMode=伸缩模式"
"$$$/aui/ClipTrackView/ClipMenu/StretchProperties=伸缩属性..."
"$$$/aui/ClipTrackView/ClipMenu/SuspendGrouping=挂起编组"
"$$$/aui/ClipTrackView/ClipMenu/TimeSelection=时间选区"
"$$$/aui/ClipTrackView/ClipMenu/TimeSelectionDots=时间选区..."
"$$$/aui/ClipTrackView/ClipMenu/Track=轨道"
"$$$/aui/ClipTrackView/ClipMenu/TrimToTimeSelection=修剪到时间选区"
"$$$/aui/ClipTrackView/ClipMenu/UngroupSelectedClips=解散选中素材"
"$$$/aui/Controls/Power=切换开关状态"
"$$$/aui/ConvertSampleTypeDialog/ConvertSampleType=转换采样类型"
"$$$/aui/ConvertSampleTypeDialog/EffectsRackToBeCleared=继续进行转换采样类型操作，将导致效果架被清除、单个效果被取消。您是否打算继续？"
"$$$/aui/ConvertSampleTypeDialog/IllegalBitDepthMsg=位深度必须至少在 @0，并且不大于 @1。"
"$$$/aui/ConvertSampleTypeDialog/IllegalSampleRateMsg=采样率必须至少在 @0，并且不大于 @1。"
"$$$/aui/ConvertSampleTypeXML/Cancel=取消"
"$$$/aui/ConvertSampleTypeXML/OK=确定"
"$$$/aui/DataPrefsPage/CpuChangeNotTilNextLaunch=修改并发处理文件数量，将在下次 @APPNAME 重启后生效。"
"$$$/aui/DeClipXML/Amplify=增益:"
"$$$/aui/DeClipXML/AmplifyCheckboxTT=自动设置增益"
"$$$/aui/DeClipXML/AmplifySliderTT=在处理前指定要应用到信号的增益值"
"$$$/aui/DeClipXML/AutoAmplify=自动"
"$$$/aui/DeClipXML/ComplexityTT=指定用于插值的环绕音频值。"
"$$$/aui/DeClipXML/Cubic=三次方"
"$$$/aui/DeClipXML/CubicRBTT=设置插值方式为三次方"
"$$$/aui/DeClipXML/FFT=FFT"
"$$$/aui/DeClipXML/FFTRBTT=设置插值方式为 FFT (Fast Fourier Transform)"
"$$$/aui/DeClipXML/FFTSize=FFT 大小:"
"$$$/aui/DeClipXML/Interpolation=插值:"
"$$$/aui/DeClipXML/MinClipSize=最小素材大小:"
"$$$/aui/DeClipXML/MinClipSizeTT=指定修剪采样的最小连续值"
"$$$/aui/DeClipXML/Samples=采样"
"$$$/aui/DeClipXML/ThresholdSliderTT=指定咔嗒声检测灵敏度。更低的设置可检测到更多咔嗒声，但也可能包含其他声音。"
"$$$/aui/DeClipXML/Tolerance=宽容度:"
"$$$/aui/DeClipXML/ToleranceTT=确定振幅在是否削减前的信号内变化"
"$$$/aui/DeClipXML/fftSizePopupTT=决定有多少频率频段被分析"
"$$$/aui/DegreeSymbol=°"
"$$$/aui/DeleteSilenceXML/AudioIs=定义音频为 "
"$$$/aui/DeleteSilenceXML/FindLevels=查找电平"
"$$$/aui/DeleteSilenceXML/MinTime=多于"
"$$$/aui/DeleteSilenceXML/Popup/DeleteSilence=删除静音"
"$$$/aui/DeleteSilenceXML/Popup/ShorteningSilence=缩短静音"
"$$$/aui/DeleteSilenceXML/SignalAbove=信号之上"
"$$$/aui/DeleteSilenceXML/SignalBelow=信号之下"
"$$$/aui/DeleteSilenceXML/SilenceIs=定义静音为 "
"$$$/aui/DeleteSilenceXML/TrimToTime=修复依据:"
"$$$/aui/DlmsStartupProgressDialog/MainTitle=Dynamic Link Media Server"
"$$$/aui/DlmsStartupProgressDialog/SubText=This file can only be imported using the Dynamic Link Media Server process, but it is still starting and cannot yet be used.  Please wait while the process initializes and we import the selected files."
"$$$/aui/DocumentControllerManager/CDReferencedDocumentDurationChangePending=This file is referenced in one or more CD Layouts.  This action may change the duration of the file, which could cause CD tracks which reference this file to become too short to be included in a CD Layout."
"$$$/aui/DocumentControllerManager/MTReferencedDocumentDurationChangePending=This file is referenced in one or more multitrack sessions.  This action may change the duration of the file, which could cause clips which reference this file to become out of sync within their multitrack sessions."
"$$$/aui/DocumentControllerSupport/CDReferencedDocumentWarning=The selection contains files referenced by CD tracks in one or more CD Layouts.  If you continue, these CD tracks will be removed.  Do you want to continue?"
"$$$/aui/DocumentControllerSupport/MTReferencedDocumentWarning=The selection contains files referenced by clips in one or more multitrack sessions.  If you continue, these clips will be set to offline.  Do you want to continue?"
"$$$/aui/DocumentProgress/Waiting=等待..."
"$$$/aui/EditParameterInfoList/MuteToolTip=静音"
"$$$/aui/EditParameterInfoList/PanToolTip=声相"
"$$$/aui/EditParameterInfoList/RackInputToolTip=效果架输入"
"$$$/aui/EditParameterInfoList/RackMixToolTip=效果架混合"
"$$$/aui/EditParameterInfoList/RackOutputToolTip=效果架输出"
"$$$/aui/EditParameterInfoList/RackPowerToolTip=效果架开关"
"$$$/aui/EditParameterInfoList/SendNum=发送 @0 @1"
"$$$/aui/EditParameterInfoList/VolumeToolTip=音量"
"$$$/aui/Editor/EQTrackControlsView/TrackEQ=声轨 EQ: @0"
"$$$/aui/Effects/EffectsRack/DryWetParameter=干声/湿声混合"
"$$$/aui/Effects/EffectsRack/InputGainParameter=输入增益"
"$$$/aui/Effects/EffectsRack/OutputGainParameter=输出增益"
"$$$/aui/Effects/RackEffectWindow/SlotNum=位置通道 @0"
"$$$/aui/Effects/RackView/EditSelectedEffect=编辑选中的效果"
"$$$/aui/Effects/RackView/MissingEffect=丢失: @0"
"$$$/aui/Effects/RackView/PowerEffectNameTT=切换开关状态 @0"
"$$$/aui/Effects/RackView/PowerEffectsRack=切换效果架的开关状态"
"$$$/aui/Effects/RackView/PowerSelectedEffects=切换选中效果的开关状态"
"$$$/aui/Effects/RackView/PowerTT=切换开关状态"
"$$$/aui/Effects/RackView/RemoveAllEffects=移除所有效果"
"$$$/aui/Effects/RackView/RemoveSelectedEffects=移除选中的效果"
"$$$/aui/EffectsCommandHandler/EffectsAU=效果 (AU)"
"$$$/aui/EffectsCommandHandler/EffectsVST=效果 (VST)"
"$$$/aui/EffectsCommandHandler/EffectsVST3=效果 (VST3)"
"$$$/aui/EffectsCommandHandler/HighLatencyHighCPUAlertForPresetMsg=选中预设中的一个或多个效果，由于需要 CPU 密集型计算或属于高延迟，因而难以被很好的实时播放。要获得最好的回放性能，请在播放前点按效果架内的 \"应用\" 按钮。\n\n注：效果架中包含的 CPU-密集型计算或高延迟的效果显示为红色。"
"$$$/aui/EffectsCommandHandler/HighLatencyHighCPUAlertMsg=选中效果由于需要 CPU 密集型计算或属于高延迟，因而难以被很好的实时播放。  要获得最好的播放性能，请在播放前点按效果架内的 \"应用\" 按钮。\n\n注：效果架中包含的 CPU-密集型计算或高延迟的效果显示为红色。"
"$$$/aui/EffectsCommandHandler/MTHighLatencyHighCPUAlertForPresetMsg=一个或多个效果由于需要 CPU 密集型计算或属于高延迟，因而难以被很好的实时播放。  要获得最好的播放性能，请在包含该效果的音轨上激活预渲染。\n\n注：效果架中包含的 CPU-密集型计算或高延迟的效果显示为红色。"
"$$$/aui/EffectsCommandHandler/MTHighLatencyHighCPUAlertMsg=选中效果由于需要 CPU 密集型计算或属于高延迟，因而难以被很好的实时播放。  要获得最好的播放性能，请在包含该效果的音轨上激活预渲染。\n\n注：效果架中包含的 CPU-密集型计算或高延迟的效果显示为红色。"
"$$$/aui/EffectsRack/StepBackward=显示输入 / 输出 / 混合控制"
"$$$/aui/EffectsRackPanel/EditSelectedEffects=编辑选中的效果"
"$$$/aui/EffectsRackPanel/MissingEffectsWarning=由文件引用的 @1 效果的 @0 找不到: @2."
"$$$/aui/EffectsRackPanel/PowerAllEffectsTT=切换所有效果的开关状态"
"$$$/aui/EffectsRackPanel/PowerAllEffectsWithKeyTT=切换所有效果的开关状态 (@0)"
"$$$/aui/EffectsRackPanel/PowerEffectsRack=切换效果架的开关状态"
"$$$/aui/EffectsRackPanel/PowerSelectedEffects=切换选中效果的开关状态"
"$$$/aui/EffectsRackPanel/RemoveAllEffects=移除所有效果"
"$$$/aui/EffectsRackPanel/RemoveSelectedEffects=移除选中的效果"
"$$$/aui/EffectsRackPanelXML/Apply=应用"
"$$$/aui/EffectsRackPanelXML/InputKnobTT=设置输入电平"
"$$$/aui/EffectsRackPanelXML/MixControlTT=设置混合百分比"
"$$$/aui/EffectsRackPanelXML/OutputLevelTT=设置输出电平"
"$$$/aui/Enabled=启用"
"$$$/aui/ExportMarkerRangesDialogXML/Export=导出"
"$$$/aui/ExportMarkerRangesDialogXML/PostfixStartingNum=后缀开始 #:"
"$$$/aui/ExportMarkerRangesDialogXML/Prefix=前缀:"
"$$$/aui/ExportMarkerRangesDialogXML/Preview=预览:"
"$$$/aui/ExportMarkers/ExportMarkersGeneral=导出标记"
"$$$/aui/ExportMarkers/ExportMarkersProgress=导出标记"
"$$$/aui/ExportRangeMarkersDialogController/PleasePickADestinationFolderExportMsg=选择导出位置。"
"$$$/aui/ExportRangeMarkersDialogController/UnnamedMarker=未命名标记"
"$$$/aui/ExtractAudioFromCDDialog/Album=专辑:"
"$$$/aui/ExtractAudioFromCDDialog/Artist=艺术家:"
"$$$/aui/ExtractAudioFromCDDialog/Compilation=编译"
"$$$/aui/ExtractAudioFromCDDialog/ConfigureTT=标题设置"
"$$$/aui/ExtractAudioFromCDDialog/Drive=驱动器:"
"$$$/aui/ExtractAudioFromCDDialog/EjectTT=弹出"
"$$$/aui/ExtractAudioFromCDDialog/Genre=流派:"
"$$$/aui/ExtractAudioFromCDDialog/NextTT=下一个记录"
"$$$/aui/ExtractAudioFromCDDialog/PrevTT=前一个记录"
"$$$/aui/ExtractAudioFromCDDialog/RetrieveTT=检索标题"
"$$$/aui/ExtractAudioFromCDDialog/Speed=速度:"
"$$$/aui/ExtractAudioFromCDDialog/Status/Displaying=显示标题记录 @0 / @1"
"$$$/aui/ExtractAudioFromCDDialog/Status/MultipleCloseMatches=发现多个近似匹配的记录 (@0 / @1)"
"$$$/aui/ExtractAudioFromCDDialog/Status/MultipleExactMatches=发现多个精确匹配的记录 (@0 / @1)"
"$$$/aui/ExtractAudioFromCDDialog/Status/Next=检索下一标题记录..."
"$$$/aui/ExtractAudioFromCDDialog/Status/NoConnection=没有网络连接"
"$$$/aui/ExtractAudioFromCDDialog/Status/NoMatches=没有发现匹配记录"
"$$$/aui/ExtractAudioFromCDDialog/Status/OneMatch=发现一个匹配记录"
"$$$/aui/ExtractAudioFromCDDialog/Status/Prev=检索前一标题记录..."
"$$$/aui/ExtractAudioFromCDDialog/Status/Ready=准备检索标题记录"
"$$$/aui/ExtractAudioFromCDDialog/Status/Retrieving=正在检索标题记录..."
"$$$/aui/ExtractAudioFromCDDialog/Year=年代:"
"$$$/aui/ExtractAudioFromCDSettings/AutoRetrieve=自动检索标题"
"$$$/aui/ExtractAudioFromCDSettings/AutoRetrieveTT=在打开从CD提取音频对话框时自动检索标题，或者在选择设备为音频 CD 时进行该操作"
"$$$/aui/ExtractAudioFromCDSettings/CDDBServer=CDDB 服务器:"
"$$$/aui/ExtractAudioFromCDSettings/CDDBServerTT=指定一个特定的 CDDB 服务器，或请留空使用默认服务器"
"$$$/aui/ExtractAudioFromCDSettings/Capitalize=每个单词的第一个字母大写"
"$$$/aui/ExtractAudioFromCDSettings/Email=Email 地址:"
"$$$/aui/ExtractAudioFromCDSettings/EmailTT=输入您的个人邮件地址"
"$$$/aui/ExtractAudioFromCDSettings/FilenameTemplate=文件名模板:"
"$$$/aui/ExtractAudioFromCDSettings/FilenameTemplateTT=输入用于在提取音轨要创建的文件名的模板: %a:艺术家, %d:专辑, %s:歌曲, %t:音轨#, %g:流派, %y:年代"
"$$$/aui/ExtractAudioFromCDSettings/Separator=编译分隔符:"
"$$$/aui/ExtractAudioFromCDSettings/SeparatorTT=当音轨标题拆分为艺术家和歌曲标题时，选择分隔符以用于编译。"
"$$$/aui/Favorites/Favorites=收藏夹"
"$$$/aui/Files/FilesPanel/AudioFile=音频文件..."
"$$$/aui/Files/FilesPanel/BitDepthColumn=位深度"
"$$$/aui/Files/FilesPanel/CDLayout=CD布局"
"$$$/aui/Files/FilesPanel/ChannelsColumn=声道"
"$$$/aui/Files/FilesPanel/CloseAllFiles=关闭所有文件"
"$$$/aui/Files/FilesPanel/CloseSelectedFiles=关闭选中文件"
"$$$/aui/Files/FilesPanel/DismissAlertForAllFiles=解除所有文件的错误警告"
"$$$/aui/Files/FilesPanel/DismissAlertForSelectedFiles=解除选中文件的错误警告"
"$$$/aui/Files/FilesPanel/DurationColumn=持续时间"
"$$$/aui/Files/FilesPanel/EditFile=编辑文件"
"$$$/aui/Files/FilesPanel/EnableAutoPlay=启用自动播放"
"$$$/aui/Files/FilesPanel/EnableLoopPreview=启用循环预览"
"$$$/aui/Files/FilesPanel/FilePathColumn=文件路径
"$$$/aui/Files/FilesPanel/FrameRateColumn=帧速率"
"$$$/aui/Files/FilesPanel/Import=导入..."
"$$$/aui/Files/FilesPanel/MediaTypeColumn=媒体类型"
"$$$/aui/Files/FilesPanel/MultitrackSession=多轨合成..."
"$$$/aui/Files/FilesPanel/NameColumn=名称"
"$$$/aui/Files/FilesPanel/New=新建"
"$$$/aui/Files/FilesPanel/NewAudioFile=新建音频文件..."
"$$$/aui/Files/FilesPanel/NewCDLayout=新建CD布局"
"$$$/aui/Files/FilesPanel/NewSession=新建多轨合成..."
"$$$/aui/Files/FilesPanel/Open=打开..."
"$$$/aui/Files/FilesPanel/OpenOrderColumn=打开顺序"
"$$$/aui/Files/FilesPanel/RecentOrderColumn=访问顺序"
"$$$/aui/Files/FilesPanel/RevealFileExplorer=在资源管理器中显示"
"$$$/aui/Files/FilesPanel/RevealFileFinder=在 Finder 中显示"
"$$$/aui/Files/FilesPanel/RevealInMediaBrowser=在媒体浏览器里显示"
"$$$/aui/Files/FilesPanel/SampleRateColumn=采样率"
"$$$/aui/Files/FilesPanel/SampleTypeColumn=采样类型"
"$$$/aui/Files/FilesPanel/ShowPreviewTransport=显示预览走带"
"$$$/aui/Files/FilesPanel/SourceFormatColumn=源格式"
"$$$/aui/Files/FilesPanel/SplitToMono=提取声道为单声道文件"
"$$$/aui/Files/FilesPanel/StatusColumn=状态"
"$$$/aui/Files/FilesPanelBase/Waiting=等待..."
"$$$/aui/Files/MediaBrowser/AddShortcut=添加快捷快捷方式"
"$$$/aui/Files/MediaBrowser/AddToMatchVolume=添加到匹配音量面板"
"$$$/aui/Files/MediaBrowser/CopyLocation=复制位置"
"$$$/aui/Files/MediaBrowser/EnableAutoPlay=启用自动播放"
"$$$/aui/Files/MediaBrowser/EnableLoopPreview=启用循环预览"
"$$$/aui/Files/MediaBrowser/OpenFile=打开文件"
"$$$/aui/Files/MediaBrowser/OpenFiles=打开文件"
"$$$/aui/Files/MediaBrowser/RemoveShortcut=移除快捷方式"
"$$$/aui/Files/MediaBrowser/RevealFileExplorer=在资源管理器显示"
"$$$/aui/Files/MediaBrowser/RevealFileFinder=在 Finder 显示"
"$$$/aui/Files/MediaBrowser/ShowPreviewTransport=显示预览走带"
"$$$/aui/Files/OMFExportDialog/EstOMFFileSize=估计 OMF 文件大小: @0"
"$$$/aui/Files/WaveSaveAsDialog/EstFileSize=估计文件大小: @0"
"$$$/aui/FilesPanel/ImportFileTT=导入文件"
"$$$/aui/FilesPanel/ImportFileWithKeyTT=导入文件 (@0)"
"$$$/aui/FilesPanel/MetadataDisplay=元数据显示..."
"$$$/aui/FilesPanel/NoFilesFoundForChosenSearchCriteria=以查找条件找不到文件"
"$$$/aui/FilesPanel/OpenFileTT=打开文件"
"$$$/aui/FilesPanel/OpenFileWithKeyTT=打开文件 (@0)"
"$$$/aui/FrequencyAnalysisPanel/Average=平均"
"$$$/aui/FrequencyAnalysisPanel/CopyAllGraphData=复制全部图形数据"
"$$$/aui/FrequencyAnalysisPanel/CopyAllTableData=复制所有表格数据"
"$$$/aui/FrequencyAnalysisPanel/CopyDBValue=复制 dB 值"
"$$$/aui/FrequencyAnalysisPanel/CopyFrequencyValue=复制频率值"
"$$$/aui/FrequencyAnalysisPanel/ScanSelectionTT=扫描选区"
"$$$/aui/FrequencyAnalysisPanel/ScanSelectionWithKeyTT=扫描选区 (@0)"
"$$$/aui/FrequencyAnalysisPanel/ScanTT=扫描"
"$$$/aui/FrequencyAnalysisPanel/ScanWithKeyTT=扫描 (@0)"
"$$$/aui/FrequencyRuler/FullLin=完全线性"
"$$$/aui/FrequencyRuler/FullLog=完全对数"
"$$$/aui/FrequencyRuler/HertzFormat=赫兹"
"$$$/aui/FrequencyRuler/MoreLin=更多线性"
"$$$/aui/FrequencyRuler/MoreLog=更多对数"
"$$$/aui/FrequencyRuler/MusicalNotesFormat=音符"
"$$$/aui/FrequencyRuler/ResolutionDec=降低频谱分辨率"
"$$$/aui/FrequencyRuler/ResolutionInc=增加频率分辨率"
"$$$/aui/FrequencyRuler/ZoomIn=放大 (频率)"
"$$$/aui/FrequencyRuler/ZoomOut=缩小 (频率)"
"$$$/aui/FrequencyRuler/ZoomReset=重置缩放 (频率)"
"$$$/aui/GenericDialogXML/Cancel=取消"
"$$$/aui/GenericDialogXML/OK=确定"
"$$$/aui/HealingBrushTool/Size=大小:"
"$$$/aui/HealingBrushToolLabel/px=px"
"$$$/aui/HealingBrushToolOptionsXML/Size=大小:"
"$$$/aui/HealingBrushToolOptionsXML/px=px"
"$$$/aui/HissXML/Advanced=高级"
"$$$/aui/HissXML/Channel=声道:"
"$$$/aui/HissXML/ChannelPopupTT=确定噪声基准的显示声道"
"$$$/aui/HissXML/DecayRateUnit=%"
"$$$/aui/HissXML/FFTSize=FFT 大小:"
"$$$/aui/HissXML/LinearScale=线性"
"$$$/aui/HissXML/LogarithmicScale=对数"
"$$$/aui/HissXML/NoiseFloor=采集噪声基准"
"$$$/aui/HissXML/NoiseFloorCaptureSettings=噪声基准采集设置"
"$$$/aui/HissXML/NoiseFloorSlider=噪声基准:"
"$$$/aui/HissXML/NoiseFloorSliderTT=调节噪声基准直到获得适当的降低嘶声与音质电平值"
"$$$/aui/HissXML/NoiseFloorTT=采集当前选区为噪声基准"
"$$$/aui/HissXML/NumControlPoints=控制点:"
"$$$/aui/HissXML/OutputHissOnly=仅输出嘶声"
"$$$/aui/HissXML/OutputHissOnlyTT=设置移除除嘶声外的所有音频"
"$$$/aui/HissXML/PrecisionFactor=精度要素:"
"$$$/aui/HissXML/ProgressCancel=取消"
"$$$/aui/HissXML/ReduceBy=降低依据:"
"$$$/aui/HissXML/ReduceByTT=设置降低嘶声数量的单位为 dB"
"$$$/aui/HissXML/Scale=缩放:"
"$$$/aui/HissXML/ScalePopupTT=设置图形比例"
"$$$/aui/HissXML/SpectralDecayRate=频谱衰减率:"
"$$$/aui/HissXML/TransitionWidth=过渡范围:"
"$$$/aui/HissXML/controlPointsHotTextIDTT=设置控制节点数 (2 - 50)"
"$$$/aui/HissXML/fftSizePopupIDTT=决定有多少频率频段被分析"
"$$$/aui/HissXML/precisionFactorHotTextIDTT=决定降低嘶声时间精度并影响频谱合成衰减率低于前一个嘶声电平。"
"$$$/aui/HissXML/resetGraphBtnIDTT=重置控制曲线"
"$$$/aui/HissXML/spectralDecayRateHotTextIDTT=决定音频低于噪声基准时的频率处理百分比。"
"$$$/aui/HissXML/transitionWidthHotTextIDTT=决定噪声和残留之间的范围。A transition width of zero applies a sharp, noise-gate curve to each frequency band."
"$$$/aui/History/HistoryPanel/ClearHistory=清除历史"
"$$$/aui/History/HistoryPanel/Delete=删除"
"$$$/aui/History/HistoryPanel/StepBackward=步退"
"$$$/aui/History/HistoryPanel/StepForward=步进"
"$$$/aui/History/UndoRedoCommandHandler/Redo=重做(&R)"
"$$$/aui/History/UndoRedoCommandHandler/RedoAction=重做 @0 (&R)"
"$$$/aui/History/UndoRedoCommandHandler/Undo=撤销 (&U)"
"$$$/aui/History/UndoRedoCommandHandler/UndoAction=撤销 @0 (&U)"
"$$$/aui/Initializer/AdobeGray=Adobe 灰度"
"$$$/aui/Initializer/ArcticFreeze=北极冰冻"
"$$$/aui/Initializer/EasyOnTheEyes=悦目动人"
"$$$/aui/Initializer/MidnightBlues=午夜蓝调"
"$$$/aui/Initializer/SeattleBlues=西雅图布鲁斯"
"$$$/aui/Initializer/Stealth=隐秘"
"$$$/aui/InsertEntireFileIntoCD=插入整个文件到CD布局"
"$$$/aui/InsertIntoCD=插入到CD布局"
"$$$/aui/InsertIntoCDNew=新建CD布局"
"$$$/aui/InsertIntoMultitrack=插入到多轨合成"
"$$$/aui/InsertIntoMultitrack/ChannelTypesDontMatch=被链接文件的声道类型与原始文件的声道类型不匹配。这将导致素材中的所有效果被清除。您是否要继续？"
"$$$/aui/InsertIntoMultitrack/NotVideoAlert=此剪辑只能链接到一个视频文件。"
"$$$/aui/InsertIntoMultitrack/SampleRatesDontMatch=插入文件 '@0' 的采样率与项目采样率不匹配。点击确定将生成一个可以匹配项目采样率的文件副本。"
"$$$/aui/InsertIntoMultitrack/VideoInsertWarning=每个项目只允许一条视频剪辑。您是否打算替换现有剪辑？"
"$$$/aui/InsertIntoMultitrackNew=新建多轨项目..."
"$$$/aui/InsertMedia=@0 of @1 copies have been successfully burned.  Insert blank media, then click OK to burn the next copy.  Click Cancel to skip the remaining copies."
"$$$/aui/InsertSilenceDialogXML/Cancel=取消"
"$$$/aui/InsertSilenceDialogXML/Duration=持续时间:"
"$$$/aui/InsertSilenceDialogXML/OK=确定"
"$$$/aui/KeyframeHandler/DeleteSelectedKeyframes=删除选中的关键帧"
"$$$/aui/KeyframeHandler/HoldKeyframe=隐藏关键帧"
"$$$/aui/KeyframeHandler/SelectAllKeyframes=选择所有关键帧"
"$$$/aui/KeyframeHandler/SplineCurves=曲线"
"$$$/aui/MarkAudioXML/AudioIs=定义音频 "
"$$$/aui/MarkAudioXML/FindLevels=查找电平"
"$$$/aui/MarkAudioXML/MinTime=更多以上"
"$$$/aui/MarkAudioXML/SignalAbove=信号以上"
"$$$/aui/MarkAudioXML/SignalBelow=信号以下"
"$$$/aui/MarkAudioXML/SilenceIs=定义静音 "
"$$$/aui/MarkerHandler/CDTrack=CD轨道"
"$$$/aui/MarkerHandler/CartTimer=Cart Timer"
"$$$/aui/MarkerHandler/ChangeMarkerType=更改标记类型"
"$$$/aui/MarkerHandler/ConvertToPoint=转换为点"
"$$$/aui/MarkerHandler/ConvertToRange=转换为范围"
"$$$/aui/MarkerHandler/Cue=Cue"
"$$$/aui/MarkerHandler/DeleteMarker=删除标记"
"$$$/aui/MarkerHandler/InsertIntoPlaylist=插入到播放列表"
"$$$/aui/MarkerHandler/RenameMarker=重命名标记"
"$$$/aui/MarkerHandler/ShowInMarkersPanel=在标记面板内显示"
"$$$/aui/MarkerHandler/Subclip=替代素材"
"$$$/aui/Markers/MarkersDisplay=标记显示"
"$$$/aui/Markers/MarkersUIController/Description=描述"
"$$$/aui/Markers/MarkersUIController/Duration=持续时间"
"$$$/aui/Markers/MarkersUIController/End=结束"
"$$$/aui/Markers/MarkersUIController/Filename=文件名"
"$$$/aui/Markers/MarkersUIController/Name=名称"
"$$$/aui/Markers/MarkersUIController/Start=开始"
"$$$/aui/Markers/MarkersUIController/Type=类型"
"$$$/aui/MarkersPanel/AUD=AUD"
"$$$/aui/MarkersPanel/AddCueMarkerTT=添加cue标记"
"$$$/aui/MarkersPanel/AddCueMarkerWithKeyTT=添加cue标记 (@0)"
"$$$/aui/MarkersPanel/AddSelectedRangeMarkersToPlaylist=添加已选中范围标记到播放列表"
"$$$/aui/MarkersPanel/CDTrack=CD音轨"
"$$$/aui/MarkersPanel/CartTimer=Cart Timer"
"$$$/aui/MarkersPanel/ChangeMarkerType=更改标记类型"
"$$$/aui/MarkersPanel/ChangeMarkerTypes=更改标记类型"
"$$$/aui/MarkersPanel/Cue=Cue"
"$$$/aui/MarkersPanel/DeleteAllMarkers=删除所有标记"
"$$$/aui/MarkersPanel/DeleteAllMarkersOf=删除 '@0' 的所有标记"
"$$$/aui/MarkersPanel/DeleteSelectedMarkers=删除选中标记"
"$$$/aui/MarkersPanel/EOD=EOD"
"$$$/aui/MarkersPanel/ExportAudioOfSelectedMarkerRanges=导出选中范围标记的音频"
"$$$/aui/MarkersPanel/INT=INT"
"$$$/aui/MarkersPanel/MRK=MRK"
"$$$/aui/MarkersPanel/MarkersDisplay=标记显示..."
"$$$/aui/MarkersPanel/MergeSelectedMarkers=合并已选中标记"
"$$$/aui/MarkersPanel/NoFilesFoundForChosenSearchCriteria=以查找条件找不到标记"
"$$$/aui/MarkersPanel/OUT=OUT"
"$$$/aui/MarkersPanel/SEC=SEC"
"$$$/aui/MarkersPanel/SEG=SEG"
"$$$/aui/MarkersPanel/Subclip=Subclip"
"$$$/aui/MarkersPanel/TER=TER"
"$$$/aui/MarkersUIController/CDTrack=CD Track"
"$$$/aui/MarkersUIController/CDTrackMarkerName=CD Track @0"
"$$$/aui/MarkersUIController/CDTrackMarkerNameDefaultWidth=CD Track 00"
"$$$/aui/MarkersUIController/CartTimer=Cart Timer"
"$$$/aui/MarkersUIController/Cue=Cue"
"$$$/aui/MarkersUIController/CueMarkerName=Marker @0"
"$$$/aui/MarkersUIController/CueMarkerNameDefaultWidth=Marker 00"
"$$$/aui/MarkersUIController/DefaultCueMarkerPrefix=标记 "
"$$$/aui/MarkersUIController/DefaultSubclipMarkerPrefix=Subclip "
"$$$/aui/MarkersUIController/DefaultTrackMarkerPrefix=CD音轨 "
"$$$/aui/MarkersUIController/Subclip=Subclip"
"$$$/aui/MarkersUIController/SubclipMarkerName=Subclip @0"
"$$$/aui/MarkersUIController/SubclipMarkerNameDefaultWidth=Subclip 00"
"$$$/aui/MatchClipVolumeDialog/MatchClipVolume=匹配素材音量"
"$$$/aui/MatchClipVolumeDialogXML/Cancel=取消"
"$$$/aui/MatchClipVolumeDialogXML/OK=确定"
"$$$/aui/MatchToFileSettingsViewXML/File=文件:"
"$$$/aui/MatchToPeakSettingsViewXML/PeakVolume=峰值音量:"
"$$$/aui/MatchVolumePanel/Cancel=取消"
"$$$/aui/MatchVolumePanel/FilePathTooLongAlert=匹配音量因为一个或多个已选中文件的路径或文件名太长而不能继续。调整设置后再试"
"$$$/aui/MatchVolumePanel/FilesBusyAlert=匹配音量因为一个或多个选中文件在忙碌而不能继续。在选中文件已完成所有操作后再试。"
"$$$/aui/MatchVolumePanel/FilesHaveAlerts=匹配音量因为一个或多个选中文件有警告信息而不能继续。在清除选中文件警告信息后再试。"
"$$$/aui/MatchVolumePanel/FilesRecordingAlert=匹配音量因为一个或多个选中文件正忙于录制而不能继续。在录制完成后再试。"
"$$$/aui/MatchVolumePanel/ITULoudness=ITU 响度"
"$$$/aui/MatchVolumePanel/Loudness=响度"
"$$$/aui/MatchVolumePanel/MatchVolume=匹配音量"
"$$$/aui/MatchVolumePanel/Name=名称"
"$$$/aui/MatchVolumePanel/Peak=峰值"
"$$$/aui/MatchVolumePanel/PerceivedVolume=感知"
"$$$/aui/MatchVolumePanel/PercentClip=% 素材"
"$$$/aui/MatchVolumePanel/RemoveAllFiles=移除所有文件"
"$$$/aui/MatchVolumePanel/RemoveFile=移除 \"@0\""
"$$$/aui/MatchVolumePanel/RemoveSelectedFiles=移除已选中的文件"
"$$$/aui/MatchVolumePanel/Stage=阶段"
"$$$/aui/MatchVolumePanel/Status=状态"
"$$$/aui/MatchVolumePanel/TotalRMS=总计 RMS"
"$$$/aui/MatchVolumePanel/TruePeak=准确峰值"
"$$$/aui/MatchVolumePanel/Undo=撤销"
"$$$/aui/MatchVolumePanel/ValueAndLUFSUnits=@0 LUFS"
"$$$/aui/MatchVolumePanel/ValueAndPercentUnits=@0 %"
"$$$/aui/MatchVolumePanel/ValueAndUnits=@0 dB"
"$$$/aui/MatchVolumePanelXML/SettingsTT=打开/关闭匹配音量设置"
"$$$/aui/MatchVolumePanelXML/UseLimiting=使用限幅"
"$$$/aui/MatchVolumeXML/LookaheadTime=预测时间:"
"$$$/aui/MatchVolumeXML/ReleaseTime=已用时间:"
"$$$/aui/MediaBrowser/PlayTT=Play"
"$$$/aui/MediaBrowser/StopTT=Stop"
"$$$/aui/MediaBrowserPanel/AddShortcutForCurrentDir=为 \"@0\" 添加快捷方式"
"$$$/aui/MediaBrowserPanel/AddShortcutForSelectedDirs=为所选文件夹添加快捷方式"
"$$$/aui/MediaBrowserPanel/AllFiles=All Files"
"$$$/aui/MediaBrowserPanel/AllSupportedMedia=All Supported Media"
"$$$/aui/MediaBrowserPanel/Msg=The shortcut '@0' could not be found. Press Remove to remove the shortcut."
"$$$/aui/MediaBrowserPanel/NoneAppropriateForShortcut=No appropriate item can be made into a shortcut"
"$$$/aui/MediaBrowserPanel/RemoveShortcutForCurrentDir=Remove Shortcut for \"@0\""
"$$$/aui/MediaBrowserPanel/RemoveShortcutForSelectedDirs=Remove Shortcut for Selected Folder(s)"
"$$$/aui/MediaBrowserPanelXML/AllMedia=All Media"
"$$$/aui/MediaBrowserPanelXML/AllSupportedMedia=All Supported Media"
"$$$/aui/MediaBrowserPanelXML/Contents=目录:"
"$$$/aui/MediaBrowserPanelXML/Filter=过滤:"
"$$$/aui/MediaCachePrefsPage/TempPathsNotTilNextLaunchMsg=更改磁盘缓存设置将在下次启动 @APPNAME 时生效。"
"$$$/aui/Menu/Edit/InsertIntoCD=新建CD布局(&N)"
"$$$/aui/Menu/Edit/InsertIntoMultitrackNew=新建多轨合成..."
"$$$/aui/Menu/Edit/InsertIntoMultitrackNew2=新建多轨合成(&N)..."
"$$$/aui/Menu/Favorites/DeleteFavorite=收藏名称:"
"$$$/aui/Menu/Favorites/DeleteFavoriteDialogTitle=删除收藏效果"
"$$$/aui/Menu/Favorites/DeleteFavoriteMenu=删除收藏效果(&D)..."
"$$$/aui/Menu/Favorites/NewFavorite=新建收藏"
"$$$/aui/Menu/Favorites/NoActionsRecorded=新建收藏因为没有记录被支持的操作而不能继续。"
"$$$/aui/Menu/Favorites/StartRecordingFavoriteMenu=开始记录收藏效果(&S)..."
"$$$/aui/Menu/Favorites/StopRecordingFavoriteMenu=停止记录收藏效果(&P)..."
"$$$/aui/Metadata/MetadataDisplay=元数据显示"
"$$$/aui/MetadataPanel/NextButtonTT=查找下一匹配词"
"$$$/aui/MetadataPanel/PrevButtonTT=查找前一匹配词"
"$$$/aui/MetadataPanel/WarnBadDateTT=警告: 该区域内日期无效。"
"$$$/aui/MetadataPanel/WarnBadFractionCodeTT=警告: 此区域内的整数和分数无效。"
"$$$/aui/MetadataPanel/WarnBadHexCodeTT=警告: 此区域内的十六进制 ID 无效。"
"$$$/aui/MetadataPanel/WarnBadTimeTT=警告: 该区域内时间无效。"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/CodingHistory=编码历史:"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/CodingHistoryTT=编码处理已应用到音频数据的历史记录。 (bext:codingHistory)"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/Description=描述:"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/DescriptionTT=序列描述 (bext:description)"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/OriginationDate=创建日期:"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/OriginationDateTT=音频序列的创建日期。格式为 yyyy-mm-dd（年-月-日）。(bext:originationDate)"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/OriginationTime=创建时间:"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/OriginationTimeTT=音频序列的创建时间。格式为 hh-mm-ss（小时-分-秒）。(bext:originationTime)"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/Originator=作者:"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/OriginatorReference=作者引用:"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/OriginatorReferenceTT=来自原始作者的不明确参考分配。 (bext:orignatorReference)"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/OriginatorTT=音频文件的作者/产品名称。(bext:originator)"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/TimeReference=时间参考:"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/TimeReferenceTT=音频序列的起始计数。这可用于正确放置多轨序列中音频资源（参看首选项-多轨合成中的 \"使用嵌入时间码\" ）。(bext:timeReference)"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/UMID=UMID:"
"$$$/aui/MetadataPanelBWFTabScrollContentsViewXML/UMIDTT=唯一素材标识符，参看: SMPTE 330M-2000. (bext:umid)"
"$$$/aui/MetadataPanelCART/All=All"
"$$$/aui/MetadataPanelCART/AnnouncerStack=Announcer Stack"
"$$$/aui/MetadataPanelCART/Beds=Beds"
"$$$/aui/MetadataPanelCART/Commercials=Commercials"
"$$$/aui/MetadataPanelCART/Contests=Contests"
"$$$/aui/MetadataPanelCART/DailyPlayLists=Daily Play Lists"
"$$$/aui/MetadataPanelCART/EmergencyBroadcast=Emergency Broadcast"
"$$$/aui/MetadataPanelCART/Fillers=Fillers"
"$$$/aui/MetadataPanelCART/Intros=Intros"
"$$$/aui/MetadataPanelCART/Jingles=Jingles"
"$$$/aui/MetadataPanelCART/Liners=Liners"
"$$$/aui/MetadataPanelCART/Logos=Logos"
"$$$/aui/MetadataPanelCART/MagicCall=Magic Call"
"$$$/aui/MetadataPanelCART/Music=Music"
"$$$/aui/MetadataPanelCART/NetworkDelay=Network Delay"
"$$$/aui/MetadataPanelCART/News=News"
"$$$/aui/MetadataPanelCART/Promos=Promos"
"$$$/aui/MetadataPanelCART/PublicServiceAnnouncements=Public Service Announcements"
"$$$/aui/MetadataPanelCART/Segues=Segues"
"$$$/aui/MetadataPanelCART/Shows=Shows"
"$$$/aui/MetadataPanelCART/SoundBits=Sound Bits"
"$$$/aui/MetadataPanelCART/SoundEffects=Sound Effects"
"$$$/aui/MetadataPanelCART/Sports=Sports"
"$$$/aui/MetadataPanelCART/Spots=Spots"
"$$$/aui/MetadataPanelCART/Stagers=Stagers"
"$$$/aui/MetadataPanelCART/StationID=Station ID"
"$$$/aui/MetadataPanelCART/Sweeps=Sweeps"
"$$$/aui/MetadataPanelCART/Temporary=Temporary"
"$$$/aui/MetadataPanelCART/TestTones=Test Tones"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/0dBReferenceLevel=0 dB Reference Level:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/All=All"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/AnnouncerStack=Announcer Stack"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Artist=Artist:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/ArtistTT=The artist or creator name for the audio cut. (AESCart:Artist)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Beds=Beds"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Category=Category:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/CategoryTT=Category ID, PSA, NEWS, etc. (AESCart:Category)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Classification=Classification:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/ClassificationTT=A classification key; this key can be used for general classification, selection or sorting based on language, locale or other similar applications. (AESCart:Classification)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/ClientID=Client ID:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/ClientIDTT=A client or customer identification or name. (AESCart:ClientID)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Commercials=Commercials"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Contests=Contests"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/CutID=Cut ID:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/CutIDTT=The cut number, or unique cut key. (AESCart:CutID)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/DailyPlayLists=Daily Play Lists"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/EmergencyBroadcast=Emergency Broadcast"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/EndDate=End Date:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/EndDateTT=The end date for this cut.  The format is yyyy-mm-dd (year-month-day).  If the sequence is to run forever, the date shall be 9999-12-31. (AESCart:EndDate)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/EndTime=End Time:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/EndTimeTT=The end time for this sequence.  The format is hh:mm:ss (hours:minutes:seconds). If blank, applications may assume an end time of 23:59:59. (AESCart:EndTime)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Fillers=Fillers"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Intros=Intros"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Jingles=Jingles"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/LevelReferenceTT=The sample value for 0 dB level reference (AESCart:LevelReference)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Liners=Liners"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Logos=Logos"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/MagicCall=Magic Call"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Music=Music"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/NetworkDelay=Network Delay"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/News=News"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/OutCue=Out Cue:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/OutCueTT=The optional out cue phrase to be displayed when the cut is being played. This shall be a user readable cue string. (AESCart:OutCue)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/ProducerAppID=Producer App. ID:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/ProducerAppIDTT=The vendor name, product name or both of the program or application that produced the WAVE file with this cart chunk. (AESCart:ProducerAppID)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/ProducerAppVersion=Producer App. Version:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/ProducerAppVersionTT=The version of the program or applications that produced the WAVE file containing the cart chunk. (AESCart:ProducerAppVersion)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Promos=Promos"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/PublicServiceAnnouncements=Public Service Announcements"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Segues=Segues"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Shows=Shows"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/SoundBits=Sound Bits"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/SoundEffects=Sound Effects"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Sports=Sports"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Spots=Spots"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Stagers=Stagers"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/StardDateTT=The start date for this sequence.  The format is yyyy-mm-dd (year-month-day).  To signify an immediate start date, applications use 1900-01-01. (AESCart:StartDate)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/StartDate=StartDate:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/StartTime=Start Time:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/StartTimeTT=The start time for this sequence.  The format is hh:mm:ss (hours:minutes:seconds).  If blank, applications may assume a start time of 00:00:00. (AESCart:StartTime)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Station=Station"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Sweeps=Sweeps"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/TagText=Tag Text:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/TagTextTT=System- or user- defined descriptive text for the sound, such as live tag, script information, descriptive text special instructions, and so on. (AESCart:TagText)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Temporary=Temporary"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/TestTones=Test Tones"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/Title=Title:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/TitleTT=A descriptive summary of the audio contents of the file, and may be used as an entry into a table of contents, and so on. (AESCart:Title)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/URL=URL:"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/URLTT=A universal resource locator (URL) referencing or referenced by the audio program. (AESCart:URL)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/UserDefTT=Contents of this string may be defined by the user of the system. (AESCart:UserDef)"
"$$$/aui/MetadataPanelCartTabScrollContentsViewXML/UserDefinedText=User Defined Text:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Acapella=A capella"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Acid=Acid"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/AcidJazz=Acid Jazz"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/AcidPunk=Acid Punk"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Acoustic=Acoustic"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Album=专辑:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/AlbumTT=录制的标题，（声音来源）获取自音频文件中音频。(xmpDM:album) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/AlternRock=AlternRock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Alternative=Alternative"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Ambient=环境氛围"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Artist=艺术家:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/ArtistTT=主要艺术家。 (xmpDM:artist) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Avantgarde=Avantgarde"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Ballad=Ballad"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Bass=Bass"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Bebob=Bebob"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/BigBand=Big Band"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Bluegrass=Bluegrass"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Blues=Blues"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/BootyBass=Booty Bass"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Cabaret=Cabaret"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Celtic=Celtic"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/ChamberMusic=Chamber Music"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Chanson=Chanson"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Chorus=Chorus"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/ChristianRap=Christian Rap"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/ClassicRock=Classic Rock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Classical=Classical"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Club=Club"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Comedy=Comedy"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Comments=注释:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/CommentsTT=不适合任何其他区域的任何其他文本信息。(xmpDM:logComment) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Composer=作曲:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/ComposerTT=作曲家的名称。 (xmpDM:composer) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Copyright=版权所有:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/CopyrightTT=预设的原始声音的版权持有者，而不是音频文件本身。 版权应以年和一个空格字符开头。 (dc:rights[\"x-default\"]) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/CopyrightURL=版权 URL:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/CopyrightURLTT=URL 指向一个有使用条款和文件所有权描述的网页。(xmpRights:WebStatement) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Country=Country"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Cult=Cult"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Dance=Dance"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/DanceHall=Dance Hall"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Darkwave=Darkwave"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/DateTT=音频录制时的日期（及时间）描述 (如： \"1964\" 或 \"8/10/64, 01:45:00\"). (xmp:CreateDate) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/DeathMetal=Death Metal"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Disco=Disco"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Dream=Dream"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/DrumSolo=Drum Solo"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Duet=Duet"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/EasyListening=Easy Listening"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Electronic=Electronic"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Ethnic=Ethnic"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/EuroHouse=Euro-House"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/EuroTechno=Euro-Techno"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Eurodance=Eurodance"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/FastFusion=Fast Fusion"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Folk=Folk"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/FolkRock=Folk-Rock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Folklore=Folklore"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Freestyle=Freestyle"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Funk=Funk"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Fusion=Fusion"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Game=Game"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Gangsta=Gangsta"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Genre=流派:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/GenreTT=已录制音频的流派或风格 (如： \"Rock\", \"Blues\"). (xmpDM:genre) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Gospel=Gospel"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Gothic=Gothic"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/GothicRock=Gothic Rock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Grunge=Grunge"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/HardRock=Hard Rock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/HipHop=Hip-Hop"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/House=House"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Humour=Humour"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Industrial=Industrial"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Instrumental=Instrumental"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/InstrumentalPop=Instrumental Pop"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/InstrumentalRock=Instrumental Rock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Jazz=Jazz"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/JazzFunk=Jazz+Funk"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Jungle=Jungle"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Latin=Latin"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/LoFi=Lo-Fi"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Lyrics=歌词:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/LyricsTT=歌曲的歌词或其他声音活动的文本抄录。(xmpDM:lyrics) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Meditative=Meditative"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Metal=Metal"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Musical=Musical"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/NationalFolk=National Folk"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/NativeAmerican=Native American"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/NewAge=New Age"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/NewWave=New Wave"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Noise=Noise"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Oldies=Oldies"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Opera=Opera"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Other=其他"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/PartOfCompilation=编译部分"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/PartOfCompilationTT=标明音轨编译的部分。(xmpDM:partOfCompilation) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/PartOfSet=设置部分:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/PartOfSetTT=描述音频来源设置部分的字串。该区域用于：如果专辑区域内的源描述划分为几个不同的媒介，例如，双 CD 。例如： \"1/2\". (xmpDM:discNumber) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Polka=Polka"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Pop=Pop"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/PopFolk=Pop-Folk"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/PopFunk=Pop/Funk"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/PornGroove=Porn Groove"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/PowerBallad=Power Ballad"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Pranks=Pranks"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Primus=Primus"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/ProgressiveRock=Progressive Rock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Psychadelic=Psychadelic"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/PsychedelicRock=Psychedelic Rock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Punk=Punk"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/PunkRock=Punk Rock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/RandB=R&B"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Rap=Rap"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Rave=Rave"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/RecordingDate=录制日期:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Reggae=Reggae"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/RemixedBy=混音:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/RemixedByTT=有关后期混音与其他现有作品的类似解释的更多信息。(xmpDM:engineer) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Retro=Retro"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Revival=Revival"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/RhythmicSoul=Rhythmic Soul"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Rock=Rock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/RockAndRoll=Rock & Roll"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Samba=Samba"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Satire=Satire"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Showtunes=Showtunes"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Ska=Ska"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/SlowJam=Slow Jam"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/SlowRock=Slow Rock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Sonata=Sonata"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Soul=Soul"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/SoundClip=声音剪辑"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Soundtrack=音轨"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/SouthernRock=Southern Rock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Space=Space"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Speech=Speech"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Swing=Swing"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/SymphonicRock=Symphonic Rock"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Symphony=Symphony"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Tango=Tango"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Techno=Techno"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/TechnoIndustrial=Techno-Industrial"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Title=标题:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/TitleTT=作品实际名称 (如： \"Adagio\", \"Hurricane Donna\"). (dc:title[\"x-default\"]) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/TopForty=Top 40"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/TrackNumber=曲目序号:"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/TrackNumberTT=原始来源的已录制音频的音轨序号。(xmpDM:trackNumber) "
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Trailer=Trailer"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Trance=Trance"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Tribal=Tribal"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/TripHop=Trip-Hop"
"$$$/aui/MetadataPanelID3TabScrollContentsViewXML/Vocal=Vocal"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/ArchivalLocation=档案位置:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/ArchivalLocationTT=标明文件档案的存储位置。(riffinfo:archivalLocation) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/Comments=注释:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/CommentsTT=提供有关文件的常规注释或文件主题。(xmpDM:logComment) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/Commissioned=委托:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/CommissionedTT=列出受委托的个人或组织名称的文件。 例如， \"Domenico Guardasoni\" (riffinfo:commissioned) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/Copyright=版权所有:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/CopyrightTT=文件录制的版权信息。例如，\"1991 Adobe Systems Inc.\" 如果有多个版权，由一个分号后跟一个空格进行分隔。 (dc:rights[\"x-default\"]) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/CreationDate=创建日期:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/CreationDateTT=指定创建文件主题的日期。以年-月-日的格式列出日期，单数的月份和天用零填充左侧。 例如, 1685年3月31日\"1685-03-31\" 。 (xmp:CreateDate) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/DigitizationSource=数字化来源:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/DigitizationSourceTT=提供有关文件的常规注释或文件主题。(dc:type) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/DisplayTitle=显示标题:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/DisplayTitleTT=以文字描述表示嵌入到波形文件中使用的应用程序 (dc:title) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/Engineer=工程师:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/EngineerTT=存储于文件上有关的工程师。如果有多名工程师，以分号与空格进行分隔。例如，\"Galt, John; Bell, Alexander.\" (xmpDM:engineer) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/Genre=流派:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/GenreTT=描述原始工作，诸如, \"Rock,\" \"Blues,\" \"Classical,\" 等。 (xmpDM:genre) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/Keywords=关键词:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/KeywordsTT=提供用于文件或文件主题引用的关键词列表。由分号与空格分隔多个关键词。例如，\"Seattle; aerial view; scenery.\" (dc:subject) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/Name=名称:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/NameTT=存储文件主题的标题，诸如，\"The Magic Flute\" (riffinfo:name) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/OriginalArtist=原始艺术家:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/OriginalArtistTT=列出文件的原始主题的艺术家。例如， 'Wolfgang Amadeus Mozart'. (xmpDM:artist) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/OriginalMedium=原始介质:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/OriginalMediumTT=描述文件的院士来源，诸如，\"Live peformance\", \"Radio recording\". (dc:source) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/Product=产品:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/ProductTT=指定要使用的文件的标题名称，诸如，\"La clemenza di Tito\" (riffinfo:product) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/Software=软件:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/SoftwareTT=标明用于创建文件的软件包的名称，诸如 \"Adobe Audition.\" (xmp:CreatorTool) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/SourceSupplier=源提供商:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/SourceSupplierTT=标明提供文件原始主题的个人或组织的名称。例如，\"Adobe Systems Inc.\" (riffinfo:source) "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/Subject=主题:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/SubjectTT=描述文件的内容，诸如 \"An opera in two acts.\" (dc:description)  "
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/Technician=技术:"
"$$$/aui/MetadataPanelRIFFTabScrollContentsViewXML/TechnicianTT=标明数字化处理主题文件的技术人员。例如，\"Smith, John.\" (riffinfo:technician) "
"$$$/aui/MetadataPanelRIFFTabViewXML/RadioIndustry=Radio Industry"
"$$$/aui/MetadataPanelRIFFTabViewXML/ShowAs=Show As:"
"$$$/aui/MetadataPanelRIFFTabViewXML/ShowAsPopupTT=Determines how standard RIFF metadata fields should be displayed and interpreted."
"$$$/aui/MetadataPanelRIFFTabViewXML/StandardRIFF=Standard RIFF"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/AccountExecutive=Account Executive:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/AccountExecutiveTT=Used to store the name of the Account Executive related to this file. This field has the same mapping as the 'Software' field in WAVE files. (xmp:CreatorTool)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/Agency=Agency:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/AgencyTT=Used to store the name of the Agency related to this file. This field has the same mapping as the 'Copyright' field in WAVE files. (dc:rights)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/ArtistAdvertiser=Artist / Advertiser:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/ArtistAdvertiserTT=Used to describe the artist of this song, or perhaps the advertiser of this commercial. (xmpDM:artist)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/Category=Category:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/CategoryTT=Used to determine the category of this file. This field has the same mapping as the 'Source Supplier' field in WAVE files. (riffinfo:source)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/Comments=Comments:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/CommentsTT=Used to store any additional comments for this file. (xmpDM:logComment)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/Copy=Copy:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/CopyTT=Used to store the copy recorded in or to be announced with this file. This field has the same mapping as the 'Subject' field in WAVE files. (dc:description)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/EndDate=End Date:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/EndDateTT=Used to limit when airplay of this file ends. The format is yyyy/mm/dd (year/month/day). This field has the same mapping as the 'Keywords' field in WAVE files. (dc:subject)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/IntroTime=Intro Time:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/IntroTimeTT=Used to store the duration of the introduction of this song or recording (millisecond resolution). This field has the same mapping as the 'Digitization Source' field in WAVE files. (dc:type)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/OutCue=Out Cue:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/OutCueTT=Used to store the last few words or lyrics in this file. This field has the same mapping as the 'Name' field in WAVE files. (riffinfo:name)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/Producer=Producer:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/ProducerTT=Used to store the name of the producer or engineer who created or edited this file. (xmpDM:engineer)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/SegueTime=Segue Time:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/SegueTimeTT=Used to store the duration of the conclusion. measured from the end of this song or recording (millisecond resolution). This field has the same mapping as the 'Original Medium' field in WAVE files. (dc:source)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/StartDate=Start Date:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/StartDateTT=Used to limit when airplay of this file starts. The format is yyyy/mm/dd (year/month/day). This field has the same mapping as the 'Genre' field in WAVE files. (xmpDM:genre)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/Talent=Talent:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/TalentTT=Used to store the names of the talent in this file. This field has the same mapping as the 'Technician' field in WAVE files. (riffinfo:technician)"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/TitleDescription=Title / Description:"
"$$$/aui/MetadataPanelRadioIndustryTabScrollContentsViewXML/TitleDescriptionTT=Used to name or describe the file. (dc:title)"
"$$$/aui/MixerAudioTrackControlsView/Over=过限"
"$$$/aui/MixerPanel/NoteText=多轨项目没有激活。只有在多轨项目是活动文档时调音台控制才会启用。"
"$$$/aui/MultiDocumentExportControlsHelper/FilterCannotBeUsed=当前选择的过滤器不能以需要的格式保存全部文件。"
"$$$/aui/MultiDocumentExportControlsHelper/FilterOptionsCannotBeUsed=The selected options cannot be used as the resulting file format is incompatible with the session format"
"$$$/aui/Multitrack/LocateMediaForClip=请定位素材 '@1' '@0'"
"$$$/aui/Multitrack/LocateMediaForClipWithoutOldFile=Please locate the file for clip '@0'"
"$$$/aui/Multitrack/LocateMediaForMissingFile=请定位文件 '@0'"
"$$$/aui/Multitrack/SoloButton/SoloSafe=安全独奏"
"$$$/aui/MultitrackDocument/ExportMixdownDescription=导出多轨缩混"
"$$$/aui/MultitrackDocument/ExportMixdownProgress=正在导出多轨缩混..."
"$$$/aui/MultitrackDocument/ExportToPremiere51=_51"
"$$$/aui/MultitrackDocument/ExportToPremiereDescription=创建 Premiere 兼容合成项目"
"$$$/aui/MultitrackDocument/ExportToPremiereMono=_单声道"
"$$$/aui/MultitrackDocument/ExportToPremiereProgress=正在生成 Premiere 导出音频文件..."
"$$$/aui/MultitrackDocument/ExportToPremiereStereo=_立体声"
"$$$/aui/MultitrackDocument/GroupNamePrefix=编组 "
"$$$/aui/MultitrackDocumentController/ExportSessionAsTemplate=导出项目为模板"
"$$$/aui/MultitrackDocumentController/ExportToPremiere=导出到 Adobe Premiere Pro"
"$$$/aui/MultitrackDocumentController/OMFExport=OMF 导出"
"$$$/aui/MultitrackEditorController/ResetStretchProperties=重置伸缩属性"
"$$$/aui/MultitrackEditorController/RubbaDubError_BusyClips=素材正被占用。请等待。"
"$$$/aui/MultitrackEditorController/RubbaDubError_LoopedClips=循环素材不能被对齐。请选择2个非循环素材。"
"$$$/aui/MultitrackEditorController/RubbaDubError_Select2Clips=这个指令只在2个音频素材被选择时使用。请选择2个需要对齐或取消对齐的音频素材再使用该指令。"
"$$$/aui/MultitrackEditorController/RubbaDubWarning_LongClips=对齐处理需要大量内存。保险起见，选择音频请在2分钟以内。"
"$$$/aui/MultitrackEditorController/SetPitch=设置变调"
"$$$/aui/MultitrackEditorController/SetStretchDuration=设置伸缩持续时间"
"$$$/aui/MultitrackEditorController/SetStretchPercent=设置伸缩百分率"
"$$$/aui/MultitrackEditorController/SetStretchProperties=设置伸缩属性"
"$$$/aui/MultitrackEditorController/SetStretchQuality=设置伸缩品质"
"$$$/aui/MultitrackEditorController/SetStretchType=设置伸缩类型"
"$$$/aui/MultitrackEditorController/StrechModeOff=设置伸缩模式为关闭"
"$$$/aui/MultitrackEditorController/StrechModeRealtime=设置伸缩模式为实时"
"$$$/aui/MultitrackEditorController/StrechModeRendered=设置伸缩模式为渲染"
"$$$/aui/MultitrackEditorModeTT/EQ=EQ"
"$$$/aui/MultitrackEditorModeTT/Effects=效果"
"$$$/aui/MultitrackEditorModeTT/InputsOutputs=输入/输出"
"$$$/aui/MultitrackEditorModeTT/Sends=发送"
"$$$/aui/MultitrackExportDialogXML/OpenSession=Open session after saving"
"$$$/aui/MultitrackExportDialogXML/SaveCopiesOfAssociatedFiles=Save copies of associated files"
"$$$/aui/MultitrackExportDialogXML/SaveCopiesOptions=Options..."
"$$$/aui/MultitrackMixdownDialog/NewSampleTypeInfoTT=Shows the resulting sample type(s) among all files in the panel after the above sample type conversion has been applied."
"$$$/aui/MultitrackSaveAsDialog/MetadataWarningIconTT=Warning: This file contains unsaved markers or other metadata. Check the 'Include markers and other metadata' checkbox to include these changes when saving."
"$$$/aui/MultitrackSaveAsDialog/SaveFailure/ReadOnlyFolder=Unable to create the folder to save associated files."
"$$$/aui/MultitrackSaveAsDialog/UnsupportedFilesPrompt/Format=Format"
"$$$/aui/MultitrackSaveAsDialog/UnsupportedFilesPrompt/Text=The selection contains one or more files whose file format is either unknown or not supported by Audition.  Please select a file format for these files."
"$$$/aui/NewAudioFileDialog/NewAudioFile=新建音频文件"
"$$$/aui/NewFileCommon/DirectoryNotWriteable=目标文件夹不可写。"
"$$$/aui/NewFileCommon/SessionAlreadyOpen=目标项目已被打开。请选择其他项目文件夹。"
"$$$/aui/NewFileCommon/WarnUserForOverWrite=合成项目 '@0' 已存在。您是否打算覆盖它？"
"$$$/aui/NewFileDialogXML/16=16"
"$$$/aui/NewFileDialogXML/24=24"
"$$$/aui/NewFileDialogXML/32Float=32 (浮点)"
"$$$/aui/NewFileDialogXML/5.1=5.1"
"$$$/aui/NewFileDialogXML/6000=6000"
"$$$/aui/NewFileDialogXML/8=8"
"$$$/aui/NewFileDialogXML/BitDepth=位深度:"
"$$$/aui/NewFileDialogXML/Cancel=取消"
"$$$/aui/NewFileDialogXML/Channels=声道:"
"$$$/aui/NewFileDialogXML/Filename=文件名:"
"$$$/aui/NewFileDialogXML/Hz=Hz"
"$$$/aui/NewFileDialogXML/Mono=单声道"
"$$$/aui/NewFileDialogXML/OK=确定"
"$$$/aui/NewFileDialogXML/SampleRate=采样率:"
"$$$/aui/NewFileDialogXML/Stereo=立体声"
"$$$/aui/NewFileDialogXML/ToggleAll=全部切换"
"$$$/aui/NewFileDialogXML/bits=位"
"$$$/aui/NewMultitrackFileDialog/AreYouSureDeleteTemplate=确认删除 \"@0\"?"
"$$$/aui/NewMultitrackFileDialog/NewSessionFile=新建多轨项目"
"$$$/aui/NewMultitrackFileDialog/None=无"
"$$$/aui/NewMultitrackFileDialog/UnableToDeleteTemplate=错误：无法删除 \"@0\"."
"$$$/aui/NewMultitrackFileDialog/UntitledFilename=未命名项目 @0"
"$$$/aui/NewSessionDialogXML/16Int=16"
"$$$/aui/NewSessionDialogXML/24Int=24"
"$$$/aui/NewSessionDialogXML/51=5.1"
"$$$/aui/NewSessionDialogXML/BitDepth=位深度:"
"$$$/aui/NewSessionDialogXML/Browse=浏览..."
"$$$/aui/NewSessionDialogXML/Cancel=取消"
"$$$/aui/NewSessionDialogXML/FolderLocation=文件夹位置:"
"$$$/aui/NewSessionDialogXML/Import=导入"
"$$$/aui/NewSessionDialogXML/Master=主控:"
"$$$/aui/NewSessionDialogXML/OK=确定"
"$$$/aui/NewSessionDialogXML/SampleRate=采样率:"
"$$$/aui/NewSessionDialogXML/Sessioname=项目名称:"
"$$$/aui/NewSessionDialogXML/Stereo=立体声"
"$$$/aui/NewSessionDialogXML/Template=模板:"
"$$$/aui/NoNoiseXML/Advanced=高级"
"$$$/aui/NoNoiseXML/CaptureNoisePrint=采集噪声样本"
"$$$/aui/NoNoiseXML/CaptureNoisePrintTT=采集当前选区为噪声样本"
"$$$/aui/NoNoiseXML/Channel=声道:"
"$$$/aui/NoNoiseXML/ChannelPopupTT=决定噪声样本的声道显示"
"$$$/aui/NoNoiseXML/DecayRateUnit=%"
"$$$/aui/NoNoiseXML/FFTSize=FFT 大小:"
"$$$/aui/NoNoiseXML/Highl=高"
"$$$/aui/NoNoiseXML/LinearScale=线性"
"$$$/aui/NoNoiseXML/LinearScale2=线性比例"
"$$$/aui/NoNoiseXML/LoadNoisePrintTT=加载硬盘中的噪声样本"
"$$$/aui/NoNoiseXML/LogarithmicScale=对数"
"$$$/aui/NoNoiseXML/Low=低"
"$$$/aui/NoNoiseXML/NoiseFloor=噪声基准:"
"$$$/aui/NoNoiseXML/NoisePrint=噪声样本:"
"$$$/aui/NoNoiseXML/NoisePrintCaptureSettings= 噪声样本采集设置"
"$$$/aui/NoNoiseXML/NoisePrintSnapshots=噪声样本快照:"
"$$$/aui/NoNoiseXML/NoisePrintStatus=噪声样本当前设置"
"$$$/aui/NoNoiseXML/NoisePrintStatusWarning=噪声样本未定义。请采集一段噪声样本再继续。#{endl}#{endl}注意：此窗口可在处理期间保持打开。#{endl}#{endl}1. 选择一段纯噪声波形区域。#{endl}#{endl}2. 点击“采集噪声样本”按钮。#{endl}#{endl}3. 降噪要应用于整个文件，请点击“选择整个文件”按钮。"
"$$$/aui/NoNoiseXML/NoiseReduction=降噪:"
"$$$/aui/NoNoiseXML/NoiseReductiuonTT=设置降噪强度"
"$$$/aui/NoNoiseXML/OutputNoiseOnly= 仅输出噪声"
"$$$/aui/NoNoiseXML/OutputNoiseOnlyTT=设置是否移除除噪声外的其他所有音频"
"$$$/aui/NoNoiseXML/PrecisionFactor=精度:"
"$$$/aui/NoNoiseXML/ProgressCancel=取消"
"$$$/aui/NoNoiseXML/ReduceBy=降噪依据:"
"$$$/aui/NoNoiseXML/ReduceByTT=设置降噪计量为 dB"
"$$$/aui/NoNoiseXML/SaveNoisePrintTT=保存当前噪声样本"
"$$$/aui/NoNoiseXML/Scale=缩放:"
"$$$/aui/NoNoiseXML/ScalePopupTT=设置图形缩放"
"$$$/aui/NoNoiseXML/SelectEntireFile=选择整个文件"
"$$$/aui/NoNoiseXML/Smoothing=平滑:"
"$$$/aui/NoNoiseXML/SpectralDecayRate=频谱衰减率:"
"$$$/aui/NoNoiseXML/Threshold=阈值"
"$$$/aui/NoNoiseXML/TransitionWidth=过渡范围:"
"$$$/aui/NoNoiseXML/ViewOptionsTT=显示附加视图选项"
"$$$/aui/NoNoiseXML/fftSizePopupIDTT=决定分析多少个频段"
"$$$/aui/NoNoiseXML/noisePrintSnapshotsHotTextIDTT=设置快照编号"
"$$$/aui/NoNoiseXML/precisionFactorHotTextIDTT=控制过滤器的时间解析度(更高的值可达到更好的品质但会增加处理时间)"
"$$$/aui/NoNoiseXML/resetGraphBtnIDTT=重置控制曲线"
"$$$/aui/NoNoiseXML/smoothingHotTextIDTT=决定是否考虑各个频段的噪声信号的标准误差。增加平滑度可减少作品背景的咯咯声，但会提升整个波段的噪声电平。"
"$$$/aui/NoNoiseXML/spectralDecayRateHotTextIDTT=指定音频降到噪声基准以下后处理频率的百分比"
"$$$/aui/NoNoiseXML/transitionWidthHotTextIDTT=决定噪声和非噪声之间的范围。A transition width of zero applies a sharp, noise-gate curve to each frequency band"
"$$$/aui/NoiseRemovalXML/Advanced=高级"
"$$$/aui/NoiseRemovalXML/CaptureNoisePrint=采集噪声样本"
"$$$/aui/NoiseRemovalXML/CaptureNoisePrintTT=采集当前选区为噪声样本"
"$$$/aui/NoiseRemovalXML/FFTSize=FFT 大小:"
"$$$/aui/NoiseRemovalXML/LoadNoisePrintTT=加载硬盘中的噪声样本"
"$$$/aui/NoiseRemovalXML/NoiseBasis=噪声基础功能数量:"
"$$$/aui/NoiseRemovalXML/NoisePrint=噪声样本:"
"$$$/aui/NoiseRemovalXML/NoisePrintCaptureSettings= 噪声样本采集设置"
"$$$/aui/NoiseRemovalXML/NoisePrintStatus=噪声样本当前设置"
"$$$/aui/NoiseRemovalXML/NoisePrintStatusWarning=噪声样本未定义。请采集一段噪声样本再继续。#{endl}#{endl}注意：此窗口可在处理期间保持打开。#{endl}#{endl}1. 选择一段纯噪声波形区域。#{endl}#{endl}2. 点击“采集噪声样本”按钮。#{endl}#{endl}3. 降噪要应用于整个文件，请点击“选择整个文件”按钮。"
"$$$/aui/NoiseRemovalXML/NumIterations=重复数量:"
"$$$/aui/NoiseRemovalXML/OutputNoiseOnly= 仅输出噪声"
"$$$/aui/NoiseRemovalXML/OutputNoiseOnlyTT=设置是否移除除噪声外的所有音频"
"$$$/aui/NoiseRemovalXML/ProgressCancel=取消"
"$$$/aui/NoiseRemovalXML/SaveNoisePrintTT=保存当前噪声样本"
"$$$/aui/NoiseRemovalXML/SelectEntireFile=选择整个文件"
"$$$/aui/NoiseRemovalXML/Weinerize= 人声增强"
"$$$/aui/NoiseRemovalXML/WeinerizeTT=Performs Wienerization for enhanced speech processing"
"$$$/aui/NoiseRemovalXML/fftSizePopupIDTT=决定分析多少个频段"
"$$$/aui/NormalizeDialogXML/Help=显示标准化效果的帮助"
"$$$/aui/NormalizerXML/Cancel=取消"
"$$$/aui/NormalizerXML/DCBiasAdjust=DC 偏差调节:"
"$$$/aui/NormalizerXML/LinkChannels=平均标准化所有声道"
"$$$/aui/NormalizerXML/NormalizeTol=标准化为:"
"$$$/aui/NormalizerXML/OK=确定"
"$$$/aui/OMFExportDialog/EncapsulatedOMFGreaterThan2GB=估计用于封装的 OMF 文件超过了 2GB 限制。在 OMF 设置对话框中更改“媒体”选项为“参考”，以便继续。"
"$$$/aui/OMFExportDialog/PleasePickADestinationFolderMsg=请选择导出位置。"
"$$$/aui/OMFExportDialog/warning0=项目开始时间将被更改为 "
"$$$/aui/OMFExportDialog/warning1=素材与声轨效果将被忽略。\n"
"$$$/aui/OMFExportDialog/warning10=独奏轨将不再独奏。\n"
"$$$/aui/OMFExportDialog/warning11=空白轨将被跳过。\n"
"$$$/aui/OMFExportDialog/warning12=素材与声轨名称包含的 Unicode 将被更改。\n"
"$$$/aui/OMFExportDialog/warning13=素材淡化中的关键帧将被忽略。\n"
"$$$/aui/OMFExportDialog/warning14=脱机素材将被忽略。\n"
"$$$/aui/OMFExportDialog/warning15=素材音量包络超过 +6.02 部分将被限制到 +6.02。\n"
"$$$/aui/OMFExportDialog/warning16=含有素材增益和素材音量包络的素材将只保留音量包络。\n"
"$$$/aui/OMFExportDialog/warning17=素材增益超过 +12.04 部分将被限制到 +12.04。\n"
"$$$/aui/OMFExportDialog/warning2=素材淡化将被转换为线性淡化。\n"
"$$$/aui/OMFExportDialog/warning3=总线声轨将被忽略。\n"
"$$$/aui/OMFExportDialog/warning4=声轨 EQ 将被忽略。\n"
"$$$/aui/OMFExportDialog/warning5=全部素材与声轨将被拆分输出为单声道。\n"
"$$$/aui/OMFExportDialog/warning6=隐藏素材将被忽略。\n"
"$$$/aui/OMFExportDialog/warning7=循环素材将被解除循环。\n"
"$$$/aui/OMFExportDialog/warning8=视频轨将被忽略。\n"
"$$$/aui/OMFExportDialog/warning9=已静音声道将被解除静音。\n"
"$$$/aui/OMFExportDialogXML/Browse=浏览..."
"$$$/aui/OMFExportDialogXML/Cancel=取消"
"$$$/aui/OMFExportDialogXML/Change=更改..."
"$$$/aui/OMFExportDialogXML/EstOMFFileSize=估计 OMF 及所有媒体的大小: 999999999 MB"
"$$$/aui/OMFExportDialogXML/Export=导出"
"$$$/aui/OMFExportDialogXML/Filename=文件名:"
"$$$/aui/OMFExportDialogXML/FormatSettings=OMF 设置:"
"$$$/aui/OMFExportDialogXML/Location=位置:"
"$$$/aui/OMFExportDialogXML/SampleType=采样类型:"
"$$$/aui/OMFExportDialogXML/Warnings=警告:"
"$$$/aui/OMFExportSettingsDialogXML/Cancel=取消"
"$$$/aui/OMFExportSettingsDialogXML/OK=确定"
"$$$/aui/OpenFiles/ChooseWritableDirectory=请选择一个有读写权限的文件夹。"
"$$$/aui/OpenRecentCommandHandler/Browse=浏览"
"$$$/aui/OpenRecentCommandHandler/Locate=定位 '@0'"
"$$$/aui/OpenRecentCommandHandler/Msg=找不到文件 '@0'。点击浏览按钮定位这个文件或移除按钮从最近文件列表里移除。"
"$$$/aui/OpenRecentCommandHandler/Remove=移除"
"$$$/aui/OpeningFilesProgressDialog/AssetFolderPath=选择目标以从 @0 提取已封装的媒体"
"$$$/aui/OpeningFilesProgressDialog/CrashRecoveryData=异常终止恢复数据"
"$$$/aui/OpeningFilesProgressDialog/OpenFilesCompleted=打开文件完成"
"$$$/aui/OpeningFilesProgressDialog/ProcessingMsg=处理: @0"
"$$$/aui/OpeningFilesProgressDialog/ProgressMsg=估计剩余时间: @0 @1"
"$$$/aui/OpeningFilesProgressDialog/hour=时"
"$$$/aui/OpeningFilesProgressDialog/hours=时"
"$$$/aui/OpeningFilesProgressDialog/minute=分"
"$$$/aui/OpeningFilesProgressDialog/minutes=分"
"$$$/aui/OpeningFilesProgressDialog/second=秒"
"$$$/aui/OpeningFilesProgressDialog/seconds=秒"
"$$$/aui/PaintbrushTool/Opacity=透明度:"
"$$$/aui/PanTrackControlsView/OpenTrackPannerPanel=打开声轨声相面板"
"$$$/aui/PanTrackControlsView/ResetValue=重设值"
"$$$/aui/PhaseAnalysisPanel/Channel=声道"
"$$$/aui/PhaseAnalysisPanel/CompareTo=比较为"
"$$$/aui/PhaseAnalysisPanel/ShowColorGradient=显示颜色渐变"
"$$$/aui/PitchAdjustment/cents=cents"
"$$$/aui/PitchModeOptionsXML/Apply=Apply"
"$$$/aui/PitchModeOptionsXML/ApplyTT=Apply the pitch adjustments"
"$$$/aui/PitchModeOptionsXML/Cancel=Cancel"
"$$$/aui/PitchModeOptionsXML/CancelTT=Cancel the pitch adjustments"
"$$$/aui/PitchModeOptionsXML/Channel=Channel:"
"$$$/aui/PitchModeOptionsXML/ChannelTT=Choose the reference audio channel for the Pitch display"
"$$$/aui/PitchXML/Attack=Attack:"
"$$$/aui/PitchXML/CalibrationA4=Calibration A4:"
"$$$/aui/PitchXML/CalibrationTT=Specifies the standard pitch calibration for the source audio"
"$$$/aui/PitchXML/ChannelTT=Choose the reference audio channel to use when calculating the pitch profile"
"$$$/aui/PitchXML/ChooseFFTSizeTT=Choose the FFT size"
"$$$/aui/PitchXML/CorrectionLabel=Correction:"
"$$$/aui/PitchXML/EnvelopeText=Adjust the Pitch Correction envelope in the Editor panel"
"$$$/aui/PitchXML/FFTSize=FFT Size:"
"$$$/aui/PitchXML/FFTSizeTT=Choose the resolution, or FFT size, to use when calculating the pitch profile"
"$$$/aui/PitchXML/KeyLabel=Key:"
"$$$/aui/PitchXML/Minus100Cents=-100.0 cents"
"$$$/aui/PitchXML/PitchCurveResolution=Pitch Curve Resolution:"
"$$$/aui/PitchXML/ReferenceChannel=Reference Channel:"
"$$$/aui/PitchXML/ScaleLabel=标尺:"
"$$$/aui/PitchXML/Sensitivity=灵敏度:"
"$$$/aui/PlaylistPanel/DragAndDropRangeMarkersHere=从标记面板拖放范围标记"
"$$$/aui/PlaylistPanel/Duration=持续时间"
"$$$/aui/PlaylistPanel/Loops=循环"
"$$$/aui/PlaylistPanel/Name=名称"
"$$$/aui/PlaylistPanel/RemoveAllMarkers=移除所有标记"
"$$$/aui/PlaylistPanel/RemoveSelectedMarkers=移除选中标记"
"$$$/aui/PlaylistPanel/TotalDuration=总持续时间: "
"$$$/aui/PluginManager/PluginName=名称"
"$$$/aui/PluginManager/PluginPath=路径"
"$$$/aui/PluginManager/PluginStatus=状态"
"$$$/aui/PluginManager/PluginType=类型"
"$$$/aui/PreferenceCommandHandler/ApplicationSettingsXML=ApplicationSettings.xml"
"$$$/aui/PreferenceCommandHandler/CantCreateMetadataDir=Could not create metadata display settings folder. No metadata display settings were imported."
"$$$/aui/PreferenceCommandHandler/CantCreateShortcutsDir=Could not create shortcuts folder. No keyboard shortcut sets were imported."
"$$$/aui/PreferenceCommandHandler/ImportPreferences=Import Preferences"
"$$$/aui/PreferenceCommandHandler/MetadataSettingImported=One metadata settings set was sucessfully imported."
"$$$/aui/PreferenceCommandHandler/MetadataSettingsImported=@0 metadata settings sets were sucessfully imported."
"$$$/aui/PreferenceCommandHandler/MetadataSettingsNotImported=@0 of @1 metadata display settings sets could not be imported."
"$$$/aui/PreferenceCommandHandler/ShortcutImported=One keyboard shortcut set was sucessfully imported."
"$$$/aui/PreferenceCommandHandler/ShortcutsImported=@0 keyboard shortcut sets were sucessfully imported."
"$$$/aui/PreferenceCommandHandler/ShortcutsNotImported=@0 of @1 keyboard shortcut sets could not be imported."
"$$$/aui/Preferences/MediaCachePrefsPage/None=无"
"$$$/aui/Preferences/MetadataPrefsPage/Name=标记与元数据"
"$$$/aui/PrefsCommandHandler/AppWriteCompletionMsgA=@APPNAME 设置文件 @0 已被成功导入。"
"$$$/aui/PrefsCommandHandler/AppWriteCompletionMsgB=旧版 @APPNAME 设置文件 @0 已被成功导入。"
"$$$/aui/PrefsCommandHandler/ExportApplicationSettings=导出应用设置"
"$$$/aui/PrefsCommandHandler/ImportApplicationSettings=导入应用设置"
"$$$/aui/PrefsCommandHandler/OverwriteMsg=文件 @0 已存在。您是否打算覆盖它？"
"$$$/aui/PrefsCommandHandler/WriteCompletionMsgA=文件 @0 已被成功写入。"
"$$$/aui/PrefsCommandHandler/WriteCompletionMsgB=文件 @0 由于一个未知错误不能被写入。"
"$$$/aui/PrefsCommandHandler/WriteCompletionMsgC=文件 @0 由于一个未知错误不能作为应用设置被导入。"
"$$$/aui/PrefsCommandHandler/XMLFiles=XML 文件"
"$$$/aui/PrefsDialog/ControlSurfacePage/Name=控制界面"
"$$$/aui/PrefsDialog/ControlSurfacePage/None=无"
"$$$/aui/PrefsDialog/DataPage/ConcurrentFiles=文件处理最大并发数量:"
"$$$/aui/PrefsDialog/DataPage/ConcurrentFilesTooltip=根据批处理和匹配音量操作决定可被同时处理的文件数量。"
"$$$/aui/PrefsDialog/DataPage/ConcurrentFilesWarningTooltip=在处理很多文件时当前并发处理数量可能导致系统变慢，并且可能慢于较低的设置。如果您遇到问题，试试降低该设置为1。"
"$$$/aui/PrefsDialog/DataPage/CrossfadeDeletesText=通过淡入淡出平滑删除/剪切文件界限:"
"$$$/aui/PrefsDialog/DataPage/CrossfadeDeletesTooltip=决定在通过淡化，及使用多少毫秒进行删除与剪切自动平滑时是否拼合接点"
"$$$/aui/PrefsDialog/DataPage/CrossfadeEditsText=通过淡入淡出平滑所有编辑界限:"
"$$$/aui/PrefsDialog/DataPage/CrossfadeEditsTooltip=决定在处理音频时（应用效果，调节音量，等等）是否在编辑界限上使用淡入淡出，以及使用多少毫秒"
"$$$/aui/PrefsDialog/DataPage/MillisecondsLabel= 毫秒"
"$$$/aui/PrefsDialog/DataPage/Name=数据"
"$$$/aui/PrefsDialog/DataPage/PrePostFilter=前/后过滤"
"$$$/aui/PrefsDialog/DataPage/PrePostFilterTooltip=防止错误频率在音频频谱的低端被生成"
"$$$/aui/PrefsDialog/DataPage/ResampleQuality=品质:"
"$$$/aui/PrefsDialog/DataPage/ResampleQualityTooltip=设置采样率转换的默认品质"
"$$$/aui/PrefsDialog/DataPage/SampleRateConversion=采样率转换"
"$$$/aui/PrefsDialog/DataPage/Title=数据"
"$$$/aui/PrefsDialog/DataPage/UsePartialDataWhenEffectCanceled=在取消时保留部分已处理效果数据"
"$$$/aui/PrefsDialog/DataPage/UsePartialDataWhenEffectCanceledTooltip=决定已被处理的效果数据在取消后是否保留或丢弃"
"$$$/aui/PrefsDialog/DataPrefsPage/Percentage=%"
"$$$/aui/PrefsDialog/EffectsPage/Name=效果"
"$$$/aui/PrefsDialog/EffectsPage/Title=效果"
"$$$/aui/PrefsDialog/FrequencyDisplay=频率显示"
"$$$/aui/PrefsDialog/GeneralPrefsPage/Name=常规"
"$$$/aui/PrefsDialog/HardwarePage/Name=音频硬件"
"$$$/aui/PrefsDialog/MediaCachePage/Name=媒体与暂存盘"
"$$$/aui/PrefsDialog/MultitrackPage/Name=多轨合成"
"$$$/aui/PrefsDialog/PitchDisplay=音调显示"
"$$$/aui/PrefsDialog/PlaybackPrefsPage/Name=回放"
"$$$/aui/PrefsDialog/SpectralPrefsPage/Name=频谱显示"
"$$$/aui/PrefsDialog/TimeDisplayPrefsPage/Name=时间显示"
"$$$/aui/PrefsDialog/Title=首选项"
"$$$/aui/PrefsDialog/UserInterfacePrefsPage/Percentage=%"
"$$$/aui/PrefsXML/DefaultPauseFormat=hh:mm:ss:ff"
"$$$/aui/PremiereExportDialogXML/51File=5.1 文件"
"$$$/aui/PremiereExportDialogXML/ExportBus=导出每条总线声轨为音频流"
"$$$/aui/PremiereExportDialogXML/ExportMaster=缩混项目为:"
"$$$/aui/PremiereExportDialogXML/ExportTracks=导出每条声轨为音频流"
"$$$/aui/PremiereExportDialogXML/MonoFile=单声道文件"
"$$$/aui/PremiereExportDialogXML/OpenInPremiere=在 Adobe Premiere Pro 中打开"
"$$$/aui/PremiereExportDialogXML/SampleRate=采样率:"
"$$$/aui/PremiereExportDialogXML/StereoFile=立体声文件"
"$$$/aui/PremiereSequenceExportDialog/PleasePickADestinationFolderMsg=请选择导出位置。"
"$$$/aui/PreviousPrefsImportDialogXML/ApplicationSettings=Application Settings"
"$$$/aui/PreviousPrefsImportDialogXML/EffectsPresets=Effects Presets"
"$$$/aui/PreviousPrefsImportDialogXML/Favorites=Favorites"
"$$$/aui/PreviousPrefsImportDialogXML/KeyboardShortcuts=Keyboard Shortcuts"
"$$$/aui/PreviousPrefsImportDialogXML/MetadataDisplaySettings=Metadata Display Settings"
"$$$/aui/PreviousPrefsImportDialogXML/Msg=Audition CS5.5 preferences have been detected. If you would like to import these preferences, select them from the list below:"
"$$$/aui/PreviousPrefsImportDialogXML/Warn=This is the only time you will be asked to import preferences from Audition CS5.5. If you choose to cancel, you will not have another opportunity to import these again later."
"$$$/aui/Properties=属性"
"$$$/aui/Properties/SyncWithTimePrefsTT=切换是否同步活动文件与时间和速率首选项"
"$$$/aui/Properties_AudioClipXML/BasicSettings=基本设置"
"$$$/aui/Properties_AudioClipXML/Stretch=伸缩"
"$$$/aui/Properties_AudioFileXML/TimeDisplay=时间显示"
"$$$/aui/Properties_SessionXML/Metronome=节拍器"
"$$$/aui/Properties_SessionXML/TimeDisplay=时间显示"
"$$$/aui/Properties_VideoClipXML/BasicSettings=基本设置"
"$$$/aui/Properties_VideoFileXML/TimeDisplay=时间显示"
"$$$/aui/RackProcessControlsViewXML/ProcessTT=决定效果架内的效果是否影响选区或整个文件"
"$$$/aui/RackProcessControlsViewXML/RenderTT=应用（渲染）效果架内的效果到文件"
"$$$/aui/RackView/DeleteAllEffects=移除所有效果"
"$$$/aui/RackView/RemoveEffects=移除效果"
"$$$/aui/RecentActions/CannotDoRecentAction=最后指令 '@0' 不能应用到此文件"
"$$$/aui/ReinterpretSampleRateDialog/IllegalSampleRateMsg=采样率必须至少在 @0，并且不大于 @1。"
"$$$/aui/ReinterpretSampleRateDialog/InterpretSampleRate=解释采样率"
"$$$/aui/ReinterpretSampleRateDialogXML/Cancel=取消"
"$$$/aui/ReinterpretSampleRateDialogXML/CurrentSampleRate=当前采样率:"
"$$$/aui/ReinterpretSampleRateDialogXML/DurationValue=@0"
"$$$/aui/ReinterpretSampleRateDialogXML/FileDuration=文件持续时间:"
"$$$/aui/ReinterpretSampleRateDialogXML/Hz=Hz"
"$$$/aui/ReinterpretSampleRateDialogXML/InterpretSampleRateAs=解释采样率为:"
"$$$/aui/ReinterpretSampleRateDialogXML/OK=确定"
"$$$/aui/ReinterpretSampleRateDialogXML/SampleRateHz=@0 Hz"
"$$$/aui/RemovalNoiseXML/NRIterations=Sets the number of iterations in processing"
"$$$/aui/RemovalNoiseXML/NoiseBasisFunctions=Sets the number of noise basis functions"
"$$$/aui/Ruler/EnableAllChannels=启用所有声道"
"$$$/aui/Ruler/EnableChannel=编辑声道"
"$$$/aui/SaveAllAudioAsWarning=这个指令将所有音频文件放到批处理面板准备保存。点击批处理面板的导出设置按钮选择所有保存文件的文件类型、采样率类型和目标。当你选择好设置，点击运行按钮开始保存。#{endl}#{endl}批处理面板也可在导出前将收藏效果应用到所有文件。请确认收藏设置为 \"None\"。if you only want to save the files as they are without applying additional actions."
"$$$/aui/SaveAsDialog/16bit=16 位"
"$$$/aui/SaveAsDialog/24bit=24 位"
"$$$/aui/SaveAsDialog/32bit=32 位"
"$$$/aui/SaveAsDialog/51=5.1"
"$$$/aui/SaveAsDialog/8bit=8 位"
"$$$/aui/SaveAsDialog/AlreadyOpenMsg=目标文件 \"@0\" 当前已打开并用于编辑，因而不能被覆盖。请选择一个新的文件名。"
"$$$/aui/SaveAsDialog/CreateFolderMsg=文件夹 \"@0\" 不存在。您是否打算创建它？"
"$$$/aui/SaveAsDialog/FailedToCreateFolderMsg=创建文件夹 \"@0\"时有问题。请选择其他的存储位置。"
"$$$/aui/SaveAsDialog/FileBusyMsg=文件 '@0' 正忙而不能被删除。请选择一个不同的文件名。"
"$$$/aui/SaveAsDialog/FilenameTooLongMsg=文件名太长。文件名不能长于 @0 个字符。"
"$$$/aui/SaveAsDialog/IllegalFilenameMsg=文件名包含了非法字符。文件名不允许有任何以下字符: "
"$$$/aui/SaveAsDialog/IllegalFilenameMsg2=指定位置是被操作系统保留的位置，因而不允许使用。请选择不同的位置。"
"$$$/aui/SaveAsDialog/IllegalSampleRateMsg=采样率必须至少为 @0，并且不大于 @1。"
"$$$/aui/SaveAsDialog/Mono=单声道"
"$$$/aui/SaveAsDialog/MultipleOverwriteMsg=一个或多个文件已存在。要覆盖它们吗？"
"$$$/aui/SaveAsDialog/NumChannels=@0 声道"
"$$$/aui/SaveAsDialog/OverwriteMsg=文件 '@0' 已存在。您是否打算覆盖它？"
"$$$/aui/SaveAsDialog/OverwriteMsg2=文件 '@0' 已存在。您是否打算覆盖它？"
"$$$/aui/SaveAsDialog/PleaseChooseAFilenameMsg=请选择一个文件名。"
"$$$/aui/SaveAsDialog/ReadOnlyMsg=文件 \"@0\" 因为其标记为只读或已锁定而不能被覆盖。"
"$$$/aui/SaveAsDialog/Stereo=立体声"
"$$$/aui/SaveAsDialogXML/ApplyFavorite=应用收藏效果:"
"$$$/aui/SaveAsDialogXML/Browse=浏览..."
"$$$/aui/SaveAsDialogXML/Cancel=取消"
"$$$/aui/SaveAsDialogXML/Change=更改..."
"$$$/aui/SaveAsDialogXML/ChangeSampleTypeLabel=采样类型:"
"$$$/aui/SaveAsDialogXML/ClearPanel=完成后从面板移除文件"
"$$$/aui/SaveAsDialogXML/CloseFiles=完成后关闭文件"
"$$$/aui/SaveAsDialogXML/EstFileSize=估计文件大小: 999999999 MB"
"$$$/aui/SaveAsDialogXML/EstFileSizeIconTT=警告：没有足够空闲磁盘空间保存文件到指定位置"
"$$$/aui/SaveAsDialogXML/Filename=文件名:"
"$$$/aui/SaveAsDialogXML/Format=格式:"
"$$$/aui/SaveAsDialogXML/FormatSettings=格式设置:"
"$$$/aui/SaveAsDialogXML/IncludeMetadata=包含标记与其他元数据"
"$$$/aui/SaveAsDialogXML/IncludeMetadataInSession=在项目里包含标记与其他元数据"
"$$$/aui/SaveAsDialogXML/IncludeVideo=包含视频"
"$$$/aui/SaveAsDialogXML/Location=位置:"
"$$$/aui/SaveAsDialogXML/MixdownOptions=缩混选项:"
"$$$/aui/SaveAsDialogXML/NewSampleTypeLabel=新建采样类型:"
"$$$/aui/SaveAsDialogXML/OK=确定"
"$$$/aui/SaveAsDialogXML/ReopenFiles=导出后打开文件"
"$$$/aui/SaveAsDialogXML/SampleType=采样类型:"
"$$$/aui/SaveAsUtils/App15SaveChangesMsg=以前安装的 @APPNAME 1.5 首选项已被发现。您是否打算自动导入磁盘缓存设置？"
"$$$/aui/SaveAsUtils/AppSaveChangesMsg=以前安装的 @APPNAME @0 首选项已被发现。您是否打算自动导入这些设置？"
"$$$/aui/SaveAsUtils/CDLayout=CD 布局"
"$$$/aui/SaveAsUtils/CloseAllWithAlerts==在最近的文件有一个未被确认的操作警告。您是否打算忽略警告信息？"
"$$$/aui/SaveAsUtils/DisplayGeneralLossySaveWarning=选择的格式是个压缩（有损）格式。您可能需要备份原始文件以保留完整的音频保真度。需要继续吗？"
"$$$/aui/SaveAsUtils/DisplayLossySaveWarning=文件 '@0' 已被存储为一个压缩（有损）格式。您可能需要保留原始文件的备份，以保留完整的音频保真度。您是否打算继续？"
"$$$/aui/SaveAsUtils/DisplayMetadataMissingSaveWarning=The file '@0' contains unsaved markers and other metadata.  Continuing with the save will result in those changes being lost.  Are you sure you want to continue?"
"$$$/aui/SaveAsUtils/DisplaySampleFormatConversionWarning=@0 格式不支持当前采样率。从下列选项选择以便继续:"
"$$$/aui/SaveAsUtils/DisplaySampleFormatConversionWarning/AutomaticRadio=自动转换为 @0"
"$$$/aui/SaveAsUtils/DisplaySampleFormatConversionWarning/ManualRadio=在转换采样类型对话框中指定自定义转换设置"
"$$$/aui/SaveAsUtils/EditOriginalPrompt=选择 Adobe Audition 原始编辑操作，以执行文件 @0:"
"$$$/aui/SaveAsUtils/EditOriginalPrompt/OpenCurrentFile=在 Audition 波形编辑器中打开文件"
"$$$/aui/SaveAsUtils/EditOriginalPrompt/OpenSession=打开 Audition 多轨项目以创建文件"
"$$$/aui/SaveAsUtils/FileIsBusyCantSave=文件 '@0' 不能存储，当前正忙。"
"$$$/aui/SaveAsUtils/FileIsProcessing=一个或多个文件正忙于处理作业。请取消这些作业或等待它们完成。"
"$$$/aui/SaveAsUtils/FileIsReadOnly=文件 '@0' 因为其标记为只读或已锁定而不能被覆盖。您是否打算执行另存为？"
"$$$/aui/SaveAsUtils/SaveChangesMsg=在关闭前是否存储对 '@0' 的更改？"
"$$$/aui/SaveAsUtils/SaveChangesToFilesBeforeSessionSaveMsg=@0 '@1' 包含一个未保存更改的文件。打算保存 '@2' 的更改吗？"
"$$$/aui/SaveAsUtils/SaveChangesToFilesBeforeSessionSaveMsgPlural=@0 '@1' 包含未保存更改的文件 @2。打算保存 '@3' 的更改吗？"
"$$$/aui/SaveAsUtils/session=项目"
"$$$/aui/SaveCopiesOfAssociatedFilesDialog/UnsupportedFormat=该格式不被支持。"
"$$$/aui/SaveSessionAsTemplateDialogXML/Cancel=取消"
"$$$/aui/SaveSessionAsTemplateDialogXML/Change=更改..."
"$$$/aui/SaveSessionAsTemplateDialogXML/IncludeMetadata=包含标记与其他元数据"
"$$$/aui/SaveSessionAsTemplateDialogXML/Location=位置:"
"$$$/aui/SaveSessionAsTemplateDialogXML/OK=确定"
"$$$/aui/SaveSessionAsTemplateDialogXML/TemplateName=模板名称:"
"$$$/aui/SnapToMarkers=吸附到标记"
"$$$/aui/SnapToRulerCoarse=吸附到标尺（粗略）"
"$$$/aui/SnapToRulerFine=吸附到标尺（精细）"
"$$$/aui/Snapping=吸附"
"$$$/aui/Spectral/HealBrushTooBigMsg=选中画笔尺寸大于自动修复操作允许的最大持续时间。请选择或缩小为更小的笔刷尺寸，使您的选区大约为 @0 秒（@1 个采样点）或更小，然后再试。"
"$$$/aui/SpectralResolution=频谱分辨率: "
"$$$/aui/StatusBar/AssetProcessingInSeconds=用时 @0 秒"
"$$$/aui/StatusBar/AssetProcessingMsg=@0 完成 @1"
"$$$/aui/StatusBar/AssetProcessingfailedMsg=@0 完成失败"
"$$$/aui/StatusBar/AutoSaveMessage= 完成 @0 秒"
"$$$/aui/StatusBar/CalculatingPlayback=计算回放..."
"$$$/aui/StatusBar/DetectDroppedSamples=检测丢弃采样"
"$$$/aui/StatusBar/DetectDroppedSamplesTT=检测丢弃采样"
"$$$/aui/StatusBar/DetectedDroppedSamples=已检测丢弃采样"
"$$$/aui/StatusBar/Duration=持续时间"
"$$$/aui/StatusBar/DurationTT=持续时间"
"$$$/aui/StatusBar/Error=@0 文件错误"
"$$$/aui/StatusBar/Errors=@0 文件错误"
"$$$/aui/StatusBar/ErrorsOrWarnings=@0 文件错误或警告"
"$$$/aui/StatusBar/FileStatus=文件状态"
"$$$/aui/StatusBar/FileStatusTT=文件状态"
"$$$/aui/StatusBar/FreeSpace=剩余空间"
"$$$/aui/StatusBar/FreeSpaceReplace=剩余 @0"
"$$$/aui/StatusBar/FreeSpaceTT=剩余空间"
"$$$/aui/StatusBar/FreeSpaceTime=剩余空间（时间）"
"$$$/aui/StatusBar/FreeSpaceTimeTT=剩余空间（时间）"
"$$$/aui/StatusBar/Hide=隐藏"
"$$$/aui/StatusBar/Playing=正在播放"
"$$$/aui/StatusBar/Processing=处理 @0 文件..."
"$$$/aui/StatusBar/ProcessingPlural=处理 @0 文件..."
"$$$/aui/StatusBar/Recording=正在录制"
"$$$/aui/StatusBar/RecordingFavorite=正在记录收藏"
"$$$/aui/StatusBar/ResamplingTo= (重采样以匹配设备采样率: @0 Hz)"
"$$$/aui/StatusBar/SampleFormat=@0 Hz @1 @2 @3 @4 @5 @6"
"$$$/aui/StatusBar/SampleFormatMT=@0 Hz @1 32 位混合"
"$$$/aui/StatusBar/SampleType=采样类型"
"$$$/aui/StatusBar/SampleTypeTT=采样类型"
"$$$/aui/StatusBar/SpectralSelection= 频谱选择"
"$$$/aui/StatusBar/Stopped=已停止"
"$$$/aui/StatusBar/UncompressedAudioSize=未压缩音频大小"
"$$$/aui/StatusBar/UncompressedAudioSizeTT=未压缩音频大小"
"$$$/aui/StatusBar/VideoFrameRate=视频帧速率"
"$$$/aui/StatusBar/VideoFrameRateTT=视频帧速率"
"$$$/aui/StatusBar/Warning=@0 文件警告"
"$$$/aui/StatusBar/Warnings=@0 文件警告"
"$$$/aui/Stretch=伸缩"
"$$$/aui/SurroundPannerLarge/CenterChannel=中置"
"$$$/aui/SurroundPannerLarge/LFEOnly=仅重低音"
"$$$/aui/SurroundPannerLarge/LeftChannel=左"
"$$$/aui/SurroundPannerLarge/LeftSurround=左环绕"
"$$$/aui/SurroundPannerLarge/RightChannel=右"
"$$$/aui/SurroundPannerLarge/RightSurround=右环绕"
"$$$/aui/SurroundPannerPanel/TrackSend=轨道: @0 - 发送 @1: @2"
"$$$/aui/SurroundPannerPanel/VolumedB=@0%"
"$$$/aui/TimeFormatLabel/23976NonDrop=23.976 fps"
"$$$/aui/TimeFormatLabel/2997Drop=29.97 丢帧"
"$$$/aui/TimeFormatLabel/2997NonDrop=29.97 fps"
"$$$/aui/TimeFormatLabel/5994Drop=59.94 丢帧"
"$$$/aui/TimeFormatLabel/5994NonDrop=59.94 fps"
"$$$/aui/TimeFormatLabel/BeatsPerMinuteAcronym= bpm"
"$$$/aui/TimeFormatLabel/FPSLabel= fps"
"$$$/aui/TimeFormatLabel/HoursMinutesSeconds=hms"
"$$$/aui/TimeFormatLabel/Samples=采样"
"$$$/aui/TimePanel/BarsAndBeats=小节与节拍"
"$$$/aui/TimePanel/CompactDiscTimeFormat=激光唱片 75 fps"
"$$$/aui/TimePanel/CustomFrames=自定义 (@0 fps)"
"$$$/aui/TimePanel/CustomFramesMainMenu=自定义(@0 fps) (&C)"
"$$$/aui/TimePanel/DecimalTimeFormat=十进制 (mm:ss.ddd)"
"$$$/aui/TimePanel/EditCustomFrameRate=编辑自定义帧速率..."
"$$$/aui/TimePanel/EditTempo=编辑速度..."
"$$$/aui/TimePanel/SMPTE23976fpsTimeFormat=SMPTE 23.976 fps"
"$$$/aui/TimePanel/SMPTE24fpsTimeFormat=SMPTE 24 fps (胶片)"
"$$$/aui/TimePanel/SMPTE25fpsTimeFormat=SMPTE 25 fps (欧广联标准)"
"$$$/aui/TimePanel/SMPTE2997DropTimeFormat=SMPTE 29.97 fps 丢帧"
"$$$/aui/TimePanel/SMPTE2997NonDropTimeFormat=SMPTE 29.97 fps"
"$$$/aui/TimePanel/SMPTE30fpsTimeFormat=SMPTE 30 fps"
"$$$/aui/TimePanel/SMPTE5994DropTimeFormat=SMPTE 59.94 fps 丢帧"
"$$$/aui/TimePanel/SMPTE5994fpsDropTimeFormat=SMPTE 丢帧 59.94 fps"
"$$$/aui/TimePanel/SMPTE5994fpsTimeFormat=SMPTE 59.94 fps"
"$$$/aui/TimePanel/Samples=采样"
"$$$/aui/TimePanel/SyncWithTimePrefs=与时间显示首选项同步"
"$$$/aui/TimelineEditorView/ClearTimeSelection=清除时间选区"
"$$$/aui/ToggleSnapToClips=吸附到素材"
"$$$/aui/ToggleSnapToFrames=吸附到帧"
"$$$/aui/ToggleSnapToLoops=吸附到循环"
"$$$/aui/ToggleSnapToZeroCrossings=吸附到零交叉"
"$$$/aui/Toolbar/HealingBrushToolTT=污点修复刷工具"
"$$$/aui/Toolbar/HealingBrushToolWithKeyTT=污点修复刷工具 (@0)"
"$$$/aui/Toolbar/LassoSelectionToolTT=套索选择工具"
"$$$/aui/Toolbar/LassoSelectionToolWithKeyTT=套索选择工具 (@0)"
"$$$/aui/Toolbar/MarqueeSelectionToolTT=框选工具"
"$$$/aui/Toolbar/MarqueeSelectionToolWithKeyTT=框选工具 (@0)"
"$$$/aui/Toolbar/MoveToolTT=移动工具"
"$$$/aui/Toolbar/MoveToolWithKeyTT=移动工具 (@0)"
"$$$/aui/Toolbar/Multitrack=多轨合成"
"$$$/aui/Toolbar/PaintbrushToolTT=笔刷选择工具"
"$$$/aui/Toolbar/PaintbrushToolWithKeyTT=笔刷选择工具 (@0)"
"$$$/aui/Toolbar/RazorAll=切割所有素材工具"
"$$$/aui/Toolbar/RazorAllClipsToolTT=切割所有素材工具"
"$$$/aui/Toolbar/RazorAllClipsToolWithKeyTT=切割所有素材工具 (@0)"
"$$$/aui/Toolbar/RazorSelected=切割选中素材工具"
"$$$/aui/Toolbar/RazorSelectedClipsToolTT=切割选中素材工具"
"$$$/aui/Toolbar/RazorSelectedClipsToolWithKeyTT=切割选中素材工具 (@0)"
"$$$/aui/Toolbar/SearchString=搜索帮助"
"$$$/aui/Toolbar/ShowPitchWithKeyTT=频谱音高显示 (@0)"
"$$$/aui/Toolbar/ShowSpectralTT=频谱频率显示"
"$$$/aui/Toolbar/ShowSpectralWithKeyTT=频谱频率显示 (@0)"
"$$$/aui/Toolbar/SlipToolTT=滑动工具"
"$$$/aui/Toolbar/SlipToolWithKeyTT=滑动工具 (@0)"
"$$$/aui/Toolbar/TimeSelectionToolTT=时间选区工具"
"$$$/aui/Toolbar/TimeSelectionToolWithKeyTT=时间选区工具 (@0)"
"$$$/aui/Toolbar/ToggleClipStretchingTT=全局素材伸缩开关"
"$$$/aui/Toolbar/ToggleClipStretchingWithKeyTT=全局素材伸缩开关 (@0)"
"$$$/aui/Toolbar/ToggleMetronomeTT=节拍器开关"
"$$$/aui/Toolbar/ToggleMetronomeWithKeyTT=节拍器开关 (@0)"
"$$$/aui/Toolbar/ToggleSnappingTT=吸附开关"
"$$$/aui/Toolbar/ToggleSnappingWithKeyTT=吸附开关 (@0)"
"$$$/aui/Toolbar/ViewMultitrack=查看多轨编辑器"
"$$$/aui/Toolbar/ViewMultitrackEditorTT=查看多轨编辑器"
"$$$/aui/Toolbar/ViewMultitrackEditorWithKeyTT=查看多轨编辑器 (@0)"
"$$$/aui/Toolbar/ViewWaveform=查看波形编辑器"
"$$$/aui/Toolbar/ViewWaveformEditorTT=查看波形编辑器"
"$$$/aui/Toolbar/ViewWaveformEditorWithKeyTT=查看波形编辑器 (@0)"
"$$$/aui/Toolbar/Waveform=波形编辑"
"$$$/aui/Toolbar/ZoomOutFullTT=全部缩小（所有坐标）"
"$$$/aui/Toolbar/ZoomOutFullWithKeyTT=全部缩小（所有坐标） (@0)"
"$$$/aui/ToolbarXML/BrushToolTT=笔刷选择工具"
"$$$/aui/ToolbarXML/HealBrushToolTT=污点修复刷工具"
"$$$/aui/ToolbarXML/LassoSelectionToolTT=套索选择工具"
"$$$/aui/ToolbarXML/MarqueeSelectionToolTT=框选工具"
"$$$/aui/ToolbarXML/ShowPitchDisplayTT=频谱音高显示"
"$$$/aui/ToolbarXML/ShowSpectralFreqDisplayTT=频谱频率显示"
"$$$/aui/ToolbarXML/TimeSelectionToolTT=时间选区工具"
"$$$/aui/ToolbarXMLMoveToolTT=移动工具"
"$$$/aui/ToolbarXMLSlipToolTT=滑动工具"
"$$$/aui/TrackContainerView/InsertTime=插入时间"
"$$$/aui/TrackContainerView/LiftSelection=提升选区"
"$$$/aui/TrackContainerView/RippleDeleteClips=波纹删除素材"
"$$$/aui/TrackContainerView/RippleDeleteTime=波纹删除时间"
"$$$/aui/TrackContainerView/RippleDeleteTimeInSelectedClips=在选中素材内波纹删除时间"
"$$$/aui/TrackPanner=声轨声相"
"$$$/aui/Transport/Menu/Constant2x=恒定 2x"
"$$$/aui/Transport/Menu/Constant2xrev1x=恒定 2x (倒放 1x)"
"$$$/aui/Transport/Menu/Constant3x=恒定 3x"
"$$$/aui/Transport/Menu/Constant4x=恒定 4x"
"$$$/aui/Transport/Menu/Constant6x=恒定 6x"
"$$$/aui/Transport/Menu/Constant8x=恒定 8x"
"$$$/aui/Transport/Menu/ContinuousLinearRecord=连续线性录制"
"$$$/aui/Transport/Menu/DisableRecordButton=禁用录制按钮"
"$$$/aui/Transport/Menu/InstantRecordMode=即时录制模式"
"$$$/aui/Transport/Menu/LoopWhileRecordingEntire=录制期间循环（整段或选区）"
"$$$/aui/Transport/Menu/LoopWhileRecordingView=录制期间循环（视图或选区）"
"$$$/aui/Transport/Menu/PlaySpectralSelectionOnly=仅播放频谱选区"
"$$$/aui/Transport/Menu/ReturnCTIToStartOnStop=停止时返回时间指示器到开始位置"
"$$$/aui/Transport/Menu/TimedRecordMode=定时录制模式"
"$$$/aui/Transport/Menu/Variable2x4x8x=可变 (2x, 4x, 8x)"
"$$$/aui/Transport/Menu/Variable3x5x10x=可变 (3x, 5x, 10x)"
"$$$/aui/TransportControlsView/LoopPlaybackTT=循环播放"
"$$$/aui/TransportControlsView/LoopPlaybackWithKeyTT=循环播放 (@0)"
"$$$/aui/TransportControlsView/MoveCTIToNextTT=移动时间指示器到下一个"
"$$$/aui/TransportControlsView/MoveCTIToNextWithKeyTT=移动时间指示器到下一个 (@0)"
"$$$/aui/TransportControlsView/MoveCTIToPreviousTT=移动时间指示器到前一个"
"$$$/aui/TransportControlsView/MoveCTIToPreviousWithKeyTT=移动时间指示器到前一个 (@0)"
"$$$/aui/TransportControlsView/PauseTT=暂停"
"$$$/aui/TransportControlsView/PauseWithKeyTT=暂停 (@0)"
"$$$/aui/TransportControlsView/PlayTT=播放"
"$$$/aui/TransportControlsView/PlayWithKeyTT=播放 (@0)"
"$$$/aui/TransportControlsView/RecordTT=录制"
"$$$/aui/TransportControlsView/RecordWithKeyTT=录制 (@0)"
"$$$/aui/TransportControlsView/StopTT=停止"
"$$$/aui/TransportControlsView/StopWithKeyTT=停止 (@0)"
"$$$/aui/TransportPanel/CenteredLayout=居中布局"
"$$$/aui/UIAssetUtils/51=5.1"
"$$$/aui/UIAssetUtils/51Channel=5.1声道"
"$$$/aui/UIAssetUtils/Mono=单声道"
"$$$/aui/UIAssetUtils/SampleRateWUnits=@0 Hz"
"$$$/aui/UIAssetUtils/Stereo=立体声"
"$$$/aui/UICDAsset/CDLayout=CD 布局"
"$$$/aui/UIMultitrackAsset/Multitrack=多轨合成"
"$$$/aui/UIVideoAsset/FrameRateWUnits=@0 fps"
"$$$/aui/UIVideoAsset/Movie=影片"
"$$$/aui/UIVideoAsset/Video=视频"
"$$$/aui/UIWaveAsset/16bit=16"
"$$$/aui/UIWaveAsset/24bit=24"
"$$$/aui/UIWaveAsset/32bit=32 (浮点)"
"$$$/aui/UIWaveAsset/32bitbit=32 位（浮点）"
"$$$/aui/UIWaveAsset/8bit=8"
"$$$/aui/UIWaveAsset/Audio=音频"
"$$$/aui/UIWaveAsset/Channel= 声道"
"$$$/aui/UIWaveAsset/NumericChannelCountFormat=@0@1"
"$$$/aui/UIWaveAsset/bitFormat=@0 位"
"$$$/aui/UseMachineSpecificPrefsCheckboxWarning=更改该设置在生效前需重新启动 Adobe Audition。"
"$$$/aui/UserInterfacePrefsPage/Background=波形背景:"
"$$$/aui/UserInterfacePrefsPage/CDTrackMarkers=CD 轨道标记:"
"$$$/aui/UserInterfacePrefsPage/CTI=时间指示器:"
"$$$/aui/UserInterfacePrefsPage/CantChangeDefault=出厂默认预设不能被更改。"
"$$$/aui/UserInterfacePrefsPage/CantDeleteDefault=出厂默认预设不能被删除。"
"$$$/aui/UserInterfacePrefsPage/CartMarkers=Cart Timer Markers:"
"$$$/aui/UserInterfacePrefsPage/CueMarkers=Cue Markers:"
"$$$/aui/UserInterfacePrefsPage/Default=(默认)"
"$$$/aui/UserInterfacePrefsPage/Foreground=波形前景:"
"$$$/aui/UserInterfacePrefsPage/ReplacePrompt=名为 '@0' 的预设已存在。您是否打算替换 '@1'？"
"$$$/aui/UserInterfacePrefsPage/SaveAsPresetDefaultName=未命名预设"
"$$$/aui/UserInterfacePrefsPage/SaveAsPresetLabel=名称:"
"$$$/aui/UserInterfacePrefsPage/SaveAsPresetTitle=保存界面外观为预设"
"$$$/aui/UserInterfacePrefsPage/Selection=波形选区:"
"$$$/aui/UserInterfacePrefsPage/SubclipMarkers=替代素材标记:"
"$$$/aui/Value=值"
"$$$/aui/VideoEditorView/InfoAlertMessage=文件 '@0' 仅包含视频而不能被编辑。要查看视频，插入文件到一段多轨项目中。"
"$$$/aui/VideoPanel/100Perc=100% 比例"
"$$$/aui/VideoPanel/200Perc=200% 比例"
"$$$/aui/VideoPanel/25Perc=25% 比例"
"$$$/aui/VideoPanel/50Perc=50% 比例"
"$$$/aui/VideoPanel/BestFit=最适合比例"
"$$$/aui/VideoPanel/ResolutionFull=完整分辨率"
"$$$/aui/VideoPanel/ResolutionFullOnStop=停止时显示完整分辨率"
"$$$/aui/VideoPanel/ResolutionQuarter=1/4 分辨率"
"$$$/aui/VideoPanel/ResolutionSixteenth=1/16 分辨率"
"$$$/aui/VideoPropertiesView/Dims=@0x@1 (@2)"
"$$$/aui/VolEnvXML/EnvelopeText=在编辑器面板内调节下列包络:"
"$$$/aui/VolEnvXML/ParamStaticText=增幅"
"$$$/aui/VolEnvXML/ParamStaticTextTT=增幅参数"
"$$$/aui/VolEnvXML/ResetBtnTT=重置包络关键帧"
"$$$/aui/VolEnvXML/SplinesBtn=曲线"
"$$$/aui/VolEnvXML/SplinesBtnTT=显示曲线"
"$$$/aui/WaveDocument/OpenAppendAction=追加打开"
"$$$/aui/WaveDocument/OpenAppendCanceled= (部分)"
"$$$/aui/WaveDocumentController/ApplyEffectsRackForBatch=一个或多个文件已关联效果架还未被应用。如果您打算应用这些效果到您的音频，在批处理前点按 \"应用\" 按钮并再试。"
"$$$/aui/WaveDocumentController/ApplyEffectsRackForExport=效果架内的效果将不被应用于导出文件。如果您打算在导出前应用这些效果到您的音频，点按效果架内的 \"应用\" 按钮并再试。"
"$$$/aui/WaveDocumentController/ApplyEffectsRackForSave=效果架内的效果将不被应用于存储文件。如果您打算在存储前应用这些效果到您的音频，点按效果架内的 \"应用\" 按钮并再试。"
"$$$/aui/WaveDocumentController/CannotApplyFavorite=@0 收藏效果不能应用到这个文件"
"$$$/aui/WaveDocumentController/ConvertSampleType=转换采样类型"
"$$$/aui/WaveDocumentController/FileCantSaveSampleRateLocked=The file '@0' cannot be saved to the selected format or sample rate because it is locked to the sample rate of the session in which it is located.\n\nUse the Export > File command under the File menu to export a copy of the file to the desired format and sample rate."
"$$$/aui/WaveDocumentController/FoundCDTrackMarkers=There are CD Track range markers in this file.  Each CD Track range will be burned to CD as an individual CD track without a pause between tracks.  If you would like to burn the entire audio file as a single CD track, please remove the CD Track range markers before burning."
"$$$/aui/WaveDocumentController/InterpretSampleRate=解释采样率"
"$$$/aui/WaveDocumentController/Normalize=标准化"
"$$$/aui/WaveDocumentController/NotEnoughAudioToBurn=This audio file is less than 4 seconds in length, which is too short to burn to an audio CD."
"$$$/aui/WaveDocumentController/TooMuchAudioToBurn=The amount of audio in this file is longer than 78 minutes and will not fit on an audio CD.  Do you want to continue to burn only the audio which will fit on an audio CD?"
"$$$/aui/WaveEditorController/AutoHealForRepeat=自动修复"
"$$$/aui/WaveEditorController/AutoHealSelection=自动修复选区"
"$$$/aui/WaveEditorController/CaptureDynamicNoiseReductionProfile=The current audio selection will be captured and loaded as a Noise Print for use the next time the Dynamic Noise Removal effect is launched."
"$$$/aui/WaveEditorController/CaptureDynamicNoiseReductionProfileTitle=Capture Dynamic Noise Print"
"$$$/aui/WaveEditorController/CaptureNoisePrint=采集噪声样本"
"$$$/aui/WaveEditorController/CaptureNoiseReductionProfile=当前音频选区将被采集，并在下次降噪效果启动时作为噪声样本被加载使用。"
"$$$/aui/WaveEditorController/CaptureNoiseReductionProfileTitle=采集噪声样本"
"$$$/aui/WaveEditorController/Clipboard1=剪贴板 1"
"$$$/aui/WaveEditorController/Clipboard2=剪贴板 2"
"$$$/aui/WaveEditorController/Clipboard3=剪贴板 3"
"$$$/aui/WaveEditorController/Clipboard4=剪贴板 4"
"$$$/aui/WaveEditorController/Clipboard5=剪贴板 5"
"$$$/aui/WaveEditorController/ConvertSampleType=转换采样类型..."
"$$$/aui/WaveEditorController/Copy=复制"
"$$$/aui/WaveEditorController/CopyToNew=复制为新文件"
"$$$/aui/WaveEditorController/Crop=裁剪"
"$$$/aui/WaveEditorController/Cut=剪切"
"$$$/aui/WaveEditorController/Delete=删除"
"$$$/aui/WaveEditorController/DynamicSelectionLengthTooShort=请选择一段更长的时间以采集噪声样本或在动态噪声移除对话框更改“FFT 大小”设置。"
"$$$/aui/WaveEditorController/ExportSelection=存储选区为..."
"$$$/aui/WaveEditorController/InsertSilence=插入静默"
"$$$/aui/WaveEditorController/Invert=上下反转"
"$$$/aui/WaveEditorController/MixPaste=混合式粘贴..."
"$$$/aui/WaveEditorController/MixPasteForRepeat=混合式粘贴"
"$$$/aui/WaveEditorController/Paste=粘贴"
"$$$/aui/WaveEditorController/Reverse=前后反向"
"$$$/aui/WaveEditorController/SelectAll=全选"
"$$$/aui/WaveEditorController/SelectCurrentView=选择当前视图时间"
"$$$/aui/WaveEditorController/SelectionLengthTooShort=请选择一段更长的时间以采集噪声样本或在降噪对话框更改“FFT 大小”设置。"
"$$$/aui/WaveEditorController/Silence=静音"
"$$$/aui/WaveEditorController/SplitToMono=提取声道为单声道文件"
"$$$/aui/WaveEditorView/AddCDTrackMarker=添加CD音轨标记"
"$$$/aui/WaveEditorView/AddCartMarker=Add Cart Timer Marker"
"$$$/aui/WaveEditorView/AddCueMarker=Add Cue Marker"
"$$$/aui/WaveEditorView/AddSubclipMarker=Add Subclip Marker"
"$$$/aui/WaveEditorView/Amplify=放大"
"$$$/aui/WaveEditorView/ChannelButtonTooltip=声道启用状态开关: "
"$$$/aui/WaveEditorView/Fade=淡化"
"$$$/aui/WaveEditorView/Marker=标记"
"$$$/aui/WaveEditorView/SetCurrentClipboard=设置当前剪贴板"
"$$$/aui/WavePortionBarHandler/LayeredChannels=层叠声道"
"$$$/aui/WavePortionBarHandler/MatchWaveform=匹配波形声道显示"
"$$$/aui/WavePortionBarHandler/SeparatedChannels=频谱通道"
"$$$/aui/WaveSaveAsDialog/MetadataWarningIconTT=警告：此文件包含未保存的标记与其他元数据。在保存时选中“包含标记与其他元数据”复选框以包含这些更改。"
"$$$/aui/WaveSaveAsDialogController/FileCantSaveSampleRateLocked=The file '@0' cannot be saved to the selected format or sample rate because it is locked to the sample rate of the session in which it is located.\n\nUse the Export > File command under the File menu to export a copy of the file to the desired format and sample rate."
"$$$/aui/WaveSaveAsDialogController/SampleFormatConversionTooltipWarning=The @0 format does not support the current sample type, and will request the format change to @1."
"$$$/aui/WaveSaveAsDialogController/UnsupportedFormat=This format is unsupported."
"$$$/aui/ZoomControlsView/ZoomInAmplitudeTT=放大（振幅）"
"$$$/aui/ZoomControlsView/ZoomInAmplitudeWithKeyTT=放大（振幅） (@0)"
"$$$/aui/ZoomControlsView/ZoomInAtInPointTT=放大入点"
"$$$/aui/ZoomControlsView/ZoomInAtInPointWithKeyTT=放大入点 (@0)"
"$$$/aui/ZoomControlsView/ZoomInAtOutPointTT=放大出点"
"$$$/aui/ZoomControlsView/ZoomInAtOutPointWithKeyTT=放大出点 (@0)"
"$$$/aui/ZoomControlsView/ZoomInTimeTT=放大（时间）"
"$$$/aui/ZoomControlsView/ZoomInTimeWithKeyTT=放大（时间） (@0)"
"$$$/aui/ZoomControlsView/ZoomOutAmplitudeTT=缩小（振幅）"
"$$$/aui/ZoomControlsView/ZoomOutAmplitudeWithKeyTT=缩小（振幅） (@0)"
"$$$/aui/ZoomControlsView/ZoomOutFullTT=全部缩小（所有坐标）"
"$$$/aui/ZoomControlsView/ZoomOutFullWithKeyTT=全部缩小（所有坐标）(@0)"
"$$$/aui/ZoomControlsView/ZoomOutTimeTT=缩小（时间）"
"$$$/aui/ZoomControlsView/ZoomOutTimeWithKeyTT=缩小（时间）(@0)"
"$$$/aui/ZoomControlsView/ZoomToSelectionTT=缩放选区"
"$$$/aui/ZoomControlsView/ZoomToSelectionWithKeyTT=缩放选区 (@0)"
"$$$/aui/ZoomInAtInPoint=放大入点"
"$$$/aui/ZoomInAtOutPoint=放大出点"
"$$$/aui/ZoomInTime=放大（时间）"
"$$$/aui/ZoomOutTime=缩小（时间）"
"$$$/aui/ZoomPanel/CenteredLayout=居中布局"
"$$$/aui/ZoomPanel/ZoomInAmplitude=放大（振幅）"
"$$$/aui/ZoomPanel/ZoomInAtInPoint=放大入点"
"$$$/aui/ZoomPanel/ZoomInAtOutPoint=放大出点"
"$$$/aui/ZoomPanel/ZoomInTime=放大（时间）"
"$$$/aui/ZoomPanel/ZoomOutAmplitude=缩小（振幅）"
"$$$/aui/ZoomPanel/ZoomOutFull=全部缩小（所有坐标）"
"$$$/aui/ZoomPanel/ZoomOutTime=缩小（时间）"
"$$$/aui/ZoomPanel/ZoomToSelection=缩放选区"
"$$$/aui/ZoomResetTime=重置缩放（时间）"
"$$$/aui/ZoomToSelection=缩放选区"
"$$$/aui/Zooming=缩放"
"$$$/aui/analysis/AmplitudeStatistics=振幅统计"
"$$$/aui/analysis/FrequencyAnalysis=频率分析"
"$$$/aui/analysis/FrequencyGraph/Hz=Hz"
"$$$/aui/analysis/FrequencyGraph/dB=dB"
"$$$/aui/analysis/PhaseMeter=相位表"
"$$$/aui/centsSuffix= cents"
"$$$/aui/document/WaveDocumentController/ExportSelection=保存选区为"
"$$$/aui/effects/AnalysisEffect=修复"
"$$$/aui/effects/ClickRemover/DSPProcess=去除咔嗒声修复..."
"$$$/aui/effects/ClickRemover/DSPProcessDesc=去除咔嗒声"
"$$$/aui/effects/ClickRemover/DSPScan=去除咔嗒声扫描..."
"$$$/aui/effects/ClickRemover/DSPScanDesc=去除咔嗒声扫描"
"$$$/aui/effects/ClickRemover/EffectName=去除咔嗒声"
"$$$/aui/effects/ClickRemover/Problem/Clicking=咔嗒声"
"$$$/aui/effects/ClipRestoration/AutoFFTSize=自动"
"$$$/aui/effects/ClipRestoration/DSPProcess=削波失真修复..."
"$$$/aui/effects/ClipRestoration/DSPProcessDesc=修复削波失真"
"$$$/aui/effects/ClipRestoration/DSPScanProgress=削波失真扫描..."
"$$$/aui/effects/ClipRestoration/DSPScanProgressDesc=削波失真扫描"
"$$$/aui/effects/ClipRestoration/EffectName=修复削波失真"
"$$$/aui/effects/ClipRestoration/Problem/Clipping=削波失真"
"$$$/aui/effects/DeleteSilence/DSPFindLevels=删除静音查找电平..."
"$$$/aui/effects/DeleteSilence/DSPFindLevelsDesc=删除静音查找电平"
"$$$/aui/effects/DeleteSilence/DSPProcess=删除静音"
"$$$/aui/effects/DeleteSilence/DSPProcessDesc=删除静音"
"$$$/aui/effects/DeleteSilence/DSPScan=删除静音扫描..."
"$$$/aui/effects/DeleteSilence/DSPScanDesc=删除静音扫描"
"$$$/aui/effects/DeleteSilence/EffectName=删除静音"
"$$$/aui/effects/DeleteSilence/Problem/Silence=静音"
"$$$/aui/effects/EffectEditorWindow/EffectDash=效果 - @0"
"$$$/aui/effects/EffectEditorWindow/EffectsRackBypassedDuringStretchPreview=在预演伸缩效果时，效果架自动旁路。"
"$$$/aui/effects/HissEffectView/CaptureNoiseFloor=采集噪声基准"
"$$$/aui/effects/HissEffectView/CaptureNoiseFloorProgress=正在采集噪声基准..."
"$$$/aui/effects/HissEffectView/EditControlPointHorz=频率:"
"$$$/aui/effects/HissEffectView/EditControlPointVert=电平:"
"$$$/aui/effects/MarkAudio/DSPFindLevels=标记音频查找电平..."
"$$$/aui/effects/MarkAudio/DSPFindLevelsDesc=标记音频查找电平"
"$$$/aui/effects/MarkAudio/DSPScan=标记音频扫描..."
"$$$/aui/effects/MarkAudio/DSPScanDesc=标记音频扫描"
"$$$/aui/effects/MarkAudio/EffectName=标记音频"
"$$$/aui/effects/MarkAudio/Problem/Audio=音频"
"$$$/aui/effects/MixPasteDialog/MixPaste=混合式粘贴"
"$$$/aui/effects/NoNoiseEffectView/CapturedNoisePrintFiles=Audition 噪声样本文件 (*.fft)"
"$$$/aui/effects/NoNoiseEffectView/CurrentNoisePrintNotSaved=当前设置噪声样本"
"$$$/aui/effects/NoNoiseEffectView/EditControlPointHorz=频率:"
"$$$/aui/effects/NoNoiseEffectView/EditControlPointVert=电平:"
"$$$/aui/effects/NoNoiseEffectView/Error=读取文件 '@0' 期间发生未知错误。"
"$$$/aui/effects/NoNoiseEffectView/ErrorTitle=未知错误"
"$$$/aui/effects/NoNoiseEffectView/Incompatible=当前波形格式与 '@0' 保存的不兼容。"
"$$$/aui/effects/NoNoiseEffectView/IncompatibleTitle=统计不兼容"
"$$$/aui/effects/NoNoiseEffectView/NoNoisePrint=未定义"
"$$$/aui/effects/NoNoiseEffectView/OpenFileTitle=打开 Audition 噪声样本文件"
"$$$/aui/effects/NoNoiseEffectView/SaveFileTitle=保存 Audition 噪声样本文件"
"$$$/aui/effects/NoNoiseEffectView/StatusWarningChannelMisMatch=The channelization of the current noise print does not match the channelization of the active file.#{endl}#{endl}For optimal results, capture a new noise print from the active file."
"$$$/aui/effects/NoNoiseEffectView/StatusWarningNoNoiseProfile=Noise print undefined. Please capture a noise print to continue.#{endl}#{endl}Note: This window can remain open during this process.#{endl}#{endl}1. Select an area of the waveform that contains only the noise to reduce.#{endl}#{endl}2. Press the 'Capture Noise Print' button.#{endl}#{endl}3. Press the 'Select Entire File' button for the noise reduction to apply to the entire file."
"$$$/aui/effects/NoNoiseEffectView/StatusWarningSampleRateAndChannelMisMatch=The sample rate and channelization of the current noise print do not match the sample rate and channelization of the active file.#{endl}#{endl}For optimal results, capture a new noise print from the active file."
"$$$/aui/effects/NoNoiseEffectView/StatusWarningSampleRateMisMatch=The sample rate of the current noise print does not match the sample rate of the active file.#{endl}#{endl}For optimal results, capture a new noise print from the active file."
"$$$/aui/effects/NoNoiseEffectView/WrongFormat=选中文件 '@0' 不是 Audition噪声样本文件。"
"$$$/aui/effects/NoNoiseEffectView/WrongFormatTitle=错误的格式"
"$$$/aui/effects/NoiseRemovalEffectView/CapturedNoisePrintFiles=动态噪声样本文件 (*.fft)"
"$$$/aui/effects/NoiseRemovalEffectView/CurrentNoisePrintNotSaved=当前设置噪声样本"
"$$$/aui/effects/NoiseRemovalEffectView/Error=读取文件 '@0' 期间发生未知错误。"
"$$$/aui/effects/NoiseRemovalEffectView/ErrorTitle=未知错误"
"$$$/aui/effects/NoiseRemovalEffectView/Incompatible=当前波形格式与 '@0' 保存的不兼容。"
"$$$/aui/effects/NoiseRemovalEffectView/IncompatibleTitle=统计不兼容"
"$$$/aui/effects/NoiseRemovalEffectView/NoNoisePrint=未定义"
"$$$/aui/effects/NoiseRemovalEffectView/OpenFileTitle=打开 Audition 噪声样本文件"
"$$$/aui/effects/NoiseRemovalEffectView/SaveFileTitle=保存 Audition 噪声样本文件"
"$$$/aui/effects/NoiseRemovalEffectView/StatusWarningChannelMisMatch=当前噪声样本的信道与活动文件信道不匹配。#{endl}#{endl}要获得最佳效果，请从活动文件中采集新的噪声样本。"
"$$$/aui/effects/NoiseRemovalEffectView/StatusWarningNoNoiseProfile=噪声样本未定义。请采集一段噪声样本再继续。#{endl}#{endl}注意：此窗口可在处理期间保持打开。#{endl}#{endl}1. 选择一段仅用于降噪的波形区域。#{endl}#{endl}2. 点击“采集噪声样本”按钮。#{endl}#{endl}3. 降噪要应用于整个文件，请点击“选择整个文件”按钮。"
"$$$/aui/effects/NoiseRemovalEffectView/StatusWarningSampleRateAndChannelMisMatch=当前噪声样本的采样率和信道与活动文件的采样率和信道不匹配。#{endl}#{endl}要获得最佳效果，请从活动文件中采集新的噪声样本。"
"$$$/aui/effects/NoiseRemovalEffectView/WrongFormat=选中文件 '@0' 不是 Audition 噪声样本文件。"
"$$$/aui/effects/NoiseRemovalEffectView/WrongFormatTitle=错误的格式"
"$$$/aui/effects/NormalizeDialog/Normalize=标准化"
"$$$/aui/effects/RackEffectEditorWindow/RackEffectDash=机架效果 - @0"
"$$$/aui/effects/analysis/Channel=声道"
"$$$/aui/effects/analysis/ClearDeletedButton=清除已删除文件"
"$$$/aui/effects/analysis/ClearDeletedButtonTT=从列表清除已删除文件"
"$$$/aui/effects/analysis/ClearFixedButton=清除已修复问题"
"$$$/aui/effects/analysis/ClearFixedButtonTT=从列表清除已修复问题"
"$$$/aui/effects/analysis/ClearMarkedButtonTT=清除列表中的标记"
"$$$/aui/effects/analysis/DeleteAllButton=删除所有"
"$$$/aui/effects/analysis/DeleteAllButtonTT=删除所有"
"$$$/aui/effects/analysis/DeleteButton=删除"
"$$$/aui/effects/analysis/DeleteButtonTT=删除选中"
"$$$/aui/effects/analysis/Deleted=已删除"
"$$$/aui/effects/analysis/Duration=持续时间"
"$$$/aui/effects/analysis/FixAllButton=全部修复"
"$$$/aui/effects/analysis/FixAllButtonTT=修复所有问题"
"$$$/aui/effects/analysis/FixButton=修复"
"$$$/aui/effects/analysis/FixButtonTT=修复选中问题"
"$$$/aui/effects/analysis/Fixed=修复"
"$$$/aui/effects/analysis/MarkAllButtonTT=标记全部"
"$$$/aui/effects/analysis/MarkAudio/ClearFixedButton=清除已标记"
"$$$/aui/effects/analysis/MarkAudio/Create=创建 @0 个标记"
"$$$/aui/effects/analysis/MarkAudio/FixAllButton=标记全部"
"$$$/aui/effects/analysis/MarkAudio/FixButton=标记"
"$$$/aui/effects/analysis/MarkAudio/Marked=已标记"
"$$$/aui/effects/analysis/MarkAudio/Marker=标记"
"$$$/aui/effects/analysis/MarkButtonTT=标记选中"
"$$$/aui/effects/analysis/Presets=预设:"
"$$$/aui/effects/analysis/Start=开始"
"$$$/aui/effects/analysis/preset/clickremover/HeavyReduction=Heavy Reduction"
"$$$/aui/effects/analysis/preset/clickremover/LightReduction=Light Reduction"
"$$$/aui/effects/analysis/preset/clickremover/MediumReduction=Medium Reduction"
"$$$/aui/effects/analysis/preset/cliprestoration/RestoreHeavilyClipped=Restore Heavily Clipped"
"$$$/aui/effects/analysis/preset/cliprestoration/RestoreLightlyClipped=Restore Lightly Clipped"
"$$$/aui/effects/analysis/preset/cliprestoration/RestoreNormal=Restore Normal"
"$$$/aui/effects/analysispanel/CaptureNoiseReductionProfileDescription=采集噪声样本"
"$$$/aui/effects/analysispanel/Create=创建 @0 个标记"
"$$$/aui/effects/analysispanel/Info1=检测到 @0 个问题。"
"$$$/aui/effects/analysispanel/Info2=检测到 @0 个问题。"
"$$$/aui/effects/analysispanel/MarkAudioInfo1=检测到 @0 段。"
"$$$/aui/effects/analysispanel/MarkAudioInfo2=检测到 @0 段。"
"$$$/aui/effects/analysispanel/MarkAudioMultiProblemsFixed=已标记 @0 段。"
"$$$/aui/effects/analysispanel/MarkAudioOneProblemFixed=已标记 @0 段。"
"$$$/aui/effects/analysispanel/Marker=标记"
"$$$/aui/effects/analysispanel/MultiProblemsFixed=已修复 @0 个问题。"
"$$$/aui/effects/analysispanel/OneProblemFixed=已修复 @0 个问题。"
"$$$/aui/export/CopyFileDescription=文件副本"
"$$$/aui/export/CopyFileProgress=正在创建文件副本..."
"$$$/aui/export/FolderNameAppend=_副本"
"$$$/aui/files/BatchProcessExportDialog/ChooseLocation=选择位置"
"$$$/aui/files/BurnAudioDialog/Title=烧录音频"
"$$$/aui/files/CDDialog/Optimal=最佳"
"$$$/aui/files/DirContentsView/Name=名称"
"$$$/aui/files/ExportRangeMarkersDialogController/ChooseLocation=选择位置"
"$$$/aui/files/ExportSettings=导出设置"
"$$$/aui/files/ExtractAudioFromCDDialog/CheckAll=全选"
"$$$/aui/files/ExtractAudioFromCDDialog/DiscNotAvailable=碟片不可用"
"$$$/aui/files/ExtractAudioFromCDDialog/MaxSpeed=最高速度"
"$$$/aui/files/ExtractAudioFromCDDialog/Speed=@0x (@1 kbps)"
"$$$/aui/files/ExtractAudioFromCDDialog/Title=从CD中提取音频"
"$$$/aui/files/ExtractAudioFromCDDialog/TrackPrefix=CD音轨"
"$$$/aui/files/ExtractAudioFromCDDialog/UncheckAll=取消全选"
"$$$/aui/files/ExtractAudioFromCDSettings/Title=标题设置"
"$$$/aui/files/FilenameTemplates/Compilations=编译/%d/%a - %s"
"$$$/aui/files/FilenameTemplates/VariousArtists=合辑/%d/%s"
"$$$/aui/files/InsertSilenceDialog/InsertSilence=插入静音"
"$$$/aui/files/MetronomePatternDialog/DownBeat=Down Beat:"
"$$$/aui/files/MetronomePatternDialog/MetronomePattern=Metronome Accent Pattern"
"$$$/aui/files/MetronomePatternDialog/NoBeat=None:"
"$$$/aui/files/MetronomePatternDialog/NumBars=Number of Bars:"
"$$$/aui/files/MetronomePatternDialog/ResetAccentPattern=Reset Accent Pattern"
"$$$/aui/files/MetronomePatternDialog/Subdivision=Subdivision:"
"$$$/aui/files/MetronomePatternDialog/UpBeat=Up Beat:"
"$$$/aui/files/MultitrackMixdownOptionsDialog/Bus=总线"
"$$$/aui/files/MultitrackMixdownOptionsDialog/FiveOne=5.1"
"$$$/aui/files/MultitrackMixdownOptionsDialog/Master=主控"
"$$$/aui/files/MultitrackMixdownOptionsDialog/MixdownOptions=缩混选项"
"$$$/aui/files/MultitrackMixdownOptionsDialog/Mono=单声道"
"$$$/aui/files/MultitrackMixdownOptionsDialog/SourceName=源名称"
"$$$/aui/files/MultitrackMixdownOptionsDialog/Stereo=立体声"
"$$$/aui/files/MultitrackMixdownOptionsDialog/Track=声轨"
"$$$/aui/files/NewMultitrackFileDialog/DestinationFolder=选择目标文件夹"
"$$$/aui/files/OMFExportDialog/ExportTo=导出到"
"$$$/aui/files/OpeningFilesProgressDialog/ErrorTemplate=错误: @0"
"$$$/aui/files/OpeningFilesProgressDialog/FilePathColumn=文件路径"
"$$$/aui/files/OpeningFilesProgressDialog/GeneralImportFailure=错误: 一般导入失败 @0。"
"$$$/aui/files/OpeningFilesProgressDialog/NameColumn=名称"
"$$$/aui/files/OpeningFilesProgressDialog/OpeningFiles=打开文件"
"$$$/aui/files/OpeningFilesProgressDialog/WarningTemplate=警告: @0"
"$$$/aui/files/PremiereSequenceExportDialog/ExportAs=导出为"
"$$$/aui/files/PremiereSequenceExportDialog/FileSuffix= (AU Tracks)"
"$$$/aui/files/SaveAsDialog/ExportCDLayout=导出CD布局"
"$$$/aui/files/SaveAsDialog/ExportFCXML=导出 FCP XML 交换格式"
"$$$/aui/files/SaveAsDialog/ExportMixdown=导出多轨缩混"
"$$$/aui/files/SaveAsDialog/ExportRangeMarkers=导出范围标记"
"$$$/aui/files/SaveAsDialog/ExportSession=导出项目"
"$$$/aui/files/SaveAsDialog/MixdownSuffix=_缩混"
"$$$/aui/files/SaveAsDialog/SaveAs=另存为"
"$$$/aui/files/SaveAsDialog/SaveCDLayoutAs=另存CD布局为"
"$$$/aui/files/SaveCopiesOptions=保存副本选项"
"$$$/aui/files/WaveDocumentController/ExportAllRangeMarkers=导出全部范围标记"
"$$$/aui/files/WaveDocumentController/ExportFile=导出文件"
"$$$/aui/files/WaveDocumentController/SaveAs=另存为"
"$$$/aui/history/HistoryPanel/History=历史"
"$$$/aui/messagedialogs/ShowPreRenderDiskSpaceError=没有足够剩余磁盘空间来完成音轨预渲染。至少在 @0 上增加 @1 的剩余磁盘空间后再试。"
"$$$/aui/metadata/DefaultSettingsFilename=Default.xmp_view_settings.xml"
"$$$/aui/metadata/Metadata=元数据"
"$$$/aui/mixer/FaderView/dB=dB"
"$$$/aui/panels/EffectsRack=效果架"
"$$$/aui/panels/Files=文件"
"$$$/aui/panels/Levels=电平"
"$$$/aui/panels/Markers=标记"
"$$$/aui/panels/MediaBrowser=媒体浏览器"
"$$$/aui/panels/Mixer=调音台"
"$$$/aui/panels/Playlist=播放列表"
"$$$/aui/panels/StatusBar=状态栏"
"$$$/aui/panels/Time=时间"
"$$$/aui/panels/Tools=工具"
"$$$/aui/preferences/MediaCachePrefsPage/ChoosePrimaryTempDirectory=选择主临时目录:"
"$$$/aui/preferences/MediaCachePrefsPage/ChooseSecondaryTempDirectory=选择次临时目录:"
"$$$/aui/preferences/MediaCachePrefsPage/ChooseSessionTemplatesDirectory=选择项目模板文件夹:"
"$$$/aui/preferences/MediaCachePrefsPage/DisplaySurfaceRestart=更改该 OpenGL 首选项需要重启 Adobe Audition 才能生效。"
"$$$/aui/save/CDDialog/Test=测试"
"$$$/aui/save/CDDialog/TestWrite=测试及写入"
"$$$/aui/save/CDDialog/Write=写入"
"$$$/aui/test/Rubbadub=Automatic Speech Alignment"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Analysis=分析"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Effect=效果"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Generator=Generator"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Mastering=Mastering"
"$$$/dvaaudiofilterhost/componentdescriptor/category/OfflineProcess=Offline"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Restoration=Restoration"
"$$$/dvaaudiofilterhost/componentdescriptor/category/RoomFx=RoomFx"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Spacializer=Spacializer"
"$$$/dvaaudiofilterhost/componentdescriptor/category/SurroundFx=SurroundFx"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Synth=Synth"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Analyzer=Analyzer"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Delay=Delay"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Distortion=Distortion"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Dynamics=Dynamics"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3EQ=EQ"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Filter=Filter"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Generator=Generator"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Instrument=Instrument"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Mastering=Mastering"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Modulation=Modulation"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3PitchShift=Pitch Shift"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Restoration=Restoration"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Reverb=Reverb"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Spatial=Spatial"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Surround=Surround"
"$$$/dvaaudiofilterhost/componentdescriptor/category/Vst3Tools=Tools"
"$$$/dvaaudiofilterhostui/ChannelMapEditor/Channel=Channel"
"$$$/dvaaudiofilterhostui/ChannelMapEditor/ChannelBypass=Bypass"
"$$$/dvaaudiofilterhostui/ChannelMapEditor/ChannelNone=(None)"
"$$$/dvaaudiofilterhostui/ChannelMapEditor/EffectInput=Effect Input"
"$$$/dvaaudiofilterhostui/ChannelMapEditor/EffectOutput=Effect Output"
"$$$/dvaaudiofilterhostui/ChannelMapEditor/ResetRouting=Reset Routing"
"$$$/dvaaudiofilterhostui/channelmapeditor/SideChain=Side Chain: @0"
"$$$/dvaaudiofilterhostui/channelmapeditor/SideChainName=@0 (@1)"
"$$$/dvamediatypes/AudioChannelLabel/BackRight=Right Surround"
"$$$/dvaui/dialogs/Cancel=Cancel"
"$$$/faderport/ConfigDialog/DialogTitle=Configure FaderPort"
"$$$/graphicEQ10/Accuracy=精度:"
"$$$/graphicEQ10/MasterGain= 主控增益:"
"$$$/graphicEQ10/Points=点"
"$$$/graphicEQ10/Range=范围: "
"$$$/graphicEQ20/Accuracy=精度:"
"$$$/graphicEQ20/MasterGain= 主控增益:"
"$$$/graphicEQ20/Points=点"
"$$$/graphicEQ20/Range=范围: "
"$$$/graphicEQ30/Accuracy=精度:"
"$$$/graphicEQ30/MasterGain= 主控增益:"
"$$$/graphicEQ30/Points=点"
"$$$/graphicEQ30/Range=范围: "
"$$$/mackiecontroller/ConfigDialog/DialogTitle=Configure Mackie Control"
"$$$/mackiecontroller/DeviceList/Type=Type"
"$$$/mackiecontroller/LogicTitle=Logic Control"
"$$$/mackiecontroller/LogicXTTitle=Logic Control XT"
"$$$/mackiecontroller/MCUTitle=Mackie Control"
"$$$/mackiecontroller/NoMidiDevices=No MIDI Devices Detected"
"$$$/mackiecontroller/XTTitle=Mackie Control XT"
"$$$/presets/ConvertSampleType/ConvertTo16bit=转换为 16 位"
"$$$/presets/ConvertSampleType/ConvertTo24bit=转换为 24 位"
"$$$/presets/ConvertSampleType/ConvertTo32bit=转换为 32 位 (IEEE 浮点)"
"$$$/presets/ConvertSampleType/ConvertToCD_Dither=44.1 kHz, 立体声, 16 位 (三角抖动)"
"$$$/presets/ConvertSampleType/ConvertToCD_DitherWithNoiseShaping=44.1 kHz, 立体声, 16 位 (自适应噪声整形)"
"$$$/presets/ConvertSampleType/ConvertToCD_NoDither=44.1 kHz, 立体声, 16 位 (不抖动)"
"$$$/presets/ConvertSampleType/ConvertToITU51=转换为 ITU 5.1"
"$$$/presets/ConvertSampleType/ConvertToMono=转换为单声道（平衡）"
"$$$/presets/ConvertSampleType/ConvertToStereo=转换为立体声"
"$$$/presets/ConvertSampleType/ResampleTo32000=重采样到 32000 Hz"
"$$$/presets/ConvertSampleType/ResampleTo44100=重采样到 44100 Hz"
"$$$/presets/ConvertSampleType/ResampleTo47952=重采样到 47952 Hz"
"$$$/presets/ConvertSampleType/ResampleTo48000=重采样到 48000 Hz"
"$$$/presets/ConvertSampleType/ResampleTo48048=重采样到 48048 Hz"
"$$$/presets/ConvertSampleType/ResampleTo96000=重采样到 96000 Hz"
"$$$/presets/DeHummer/DeEss4410_6100=4410 - 6100 Hz Ducking"
"$$$/presets/DeHummer/DeEss4410_7000=4410 - 7000 Hz DeEsser"
"$$$/presets/DeHummer/FemaleDeEsser=Female Voice DeEsser"
"$$$/presets/DeHummer/FemaleDeSher=Female Voice DeSher"
"$$$/presets/DeHummer/MaleDeEsser=Male Voice DeEsser"
"$$$/presets/DeHummer/MaleDeSher=Male Voice DeSher"
"$$$/presets/DeHummer/Notch120=120 Hz Notch"
"$$$/presets/DeHummer/Notch120Narrow=120 Hz Notch (Super Narrow)"
"$$$/presets/DeHummer/Notch200=200 Hz Notch"
"$$$/presets/DeHummer/Notch200Narrow=200 Hz Notch (Super Narrow)"
"$$$/presets/DeHummer/ReduceHighHatBleed=Reduce High-hat bleed"
"$$$/presets/DeHummer/Remove400=Remove 400 Hz and Harmonics"
"$$$/presets/DeHummer/Remove50=Remove 50 Hz and Harmonics"
"$$$/presets/DeHummer/Remove60=Remove 60 Hz and Harmonics"
"$$$/presets/DeHummer/Resonance1000=1000 Hz Resonance"
"$$$/presets/DeleteSilence/JustKeeptheFunParts=Just Keep the Fun Parts"
"$$$/presets/DeleteSilence/SpeedUpTheLecture=Speed up the Lecture"
"$$$/presets/DeleteSilence/TrimLongSilentPauses=Trim Long Silent Pauses"
"$$$/presets/DeleteSilence/TrimShortDigitalDropouts=Trim Short Digital Dropouts"
"$$$/presets/EffectsRack/AMRadio=AM Radio"
"$$$/presets/EffectsRack/BandpassReverb=Bandpass Reverb"
"$$$/presets/EffectsRack/BoxingAnnouncer=Boxing Announcer"
"$$$/presets/EffectsRack/CleanUpAndLevelVoiceOver=Clean Up and Level Voice Over"
"$$$/presets/EffectsRack/CompressorEQFlat=Compressor-EQ (flat)"
"$$$/presets/EffectsRack/DeEssAndLimitFemaleVoiceOver=DeEss and Limit Female Voice Over"
"$$$/presets/EffectsRack/DeEssAndLimitMaleVoiceOver=DeEss and Limit Male Voice Over"
"$$$/presets/EffectsRack/DelayCenterImage=Delay Center Image (Stereo Only)"
"$$$/presets/EffectsRack/DelaySideImage=Delay Side Image (Stereo Only)"
"$$$/presets/EffectsRack/DoubleDoseOfEQ=Double Dose of EQ (flat)"
"$$$/presets/EffectsRack/EQCompressor=EQ-Compressor (flat)"
"$$$/presets/EffectsRack/EchoCenterImage=Echo Center Image (Stereo Only)"
"$$$/presets/EffectsRack/EchoSideImage=Echo Side Image (Stereo Only)"
"$$$/presets/EffectsRack/FarAwaySource=Far Away Source"
"$$$/presets/EffectsRack/GuitarDelay=Guitar Delay"
"$$$/presets/EffectsRack/HipHopVocalChain=Hip Hop Vocal Chain"
"$$$/presets/EffectsRack/JumpToHyperSpace=Jump to Hyper-space"
"$$$/presets/EffectsRack/KaraokeMachine=Karaoke Machine (Stereo Only)"
"$$$/presets/EffectsRack/LPRestorationHeavy=LP Restoration - Heavy"
"$$$/presets/EffectsRack/LPRestorationLight=LP Restoration - Light"
"$$$/presets/EffectsRack/LiftPopVocals3dB=Lift Pop Vocals 3 dB"
"$$$/presets/EffectsRack/MusicEnhancer=Music Enhancer"
"$$$/presets/EffectsRack/OnTheTelephone=On the Telephone"
"$$$/presets/EffectsRack/PodcastVoice=Podcast Voice"
"$$$/presets/EffectsRack/RadioAnnouncerVoice=Radio Announcer Voice"
"$$$/presets/EffectsRack/ReverberatedPhaser=Reverberated Phaser"
"$$$/presets/EffectsRack/SmashedDynamics=Smashed Dynamics"
"$$$/presets/EffectsRack/SonicDestructor=Sonic Destructor"
"$$$/presets/EffectsRack/StereoMaker=Stereo Maker (Hass Effect)"
"$$$/presets/EffectsRack/StereoMakerWide=Stereo Maker Wide (Hass Effect)"
"$$$/presets/EffectsRack/StereoWidener=Stereo Widener (Hass Effect)"
"$$$/presets/EffectsRack/StereoWidenerSubtle=Stereo Widener Subtle (Phase Shifter)"
"$$$/presets/EffectsRack/UnderwaterSpeech=Underwater Speech"
"$$$/presets/EffectsRack/VocalFlange=Vocal Flange"
"$$$/presets/EffectsRack/VoiceLevelerAndNoiseGate=Voice Leveler and Noise Gate"
"$$$/presets/EffectsRack/WeaponizedEffects=Weaponized Effects"
"$$$/presets/EffectsRack/WideSpookyEcho=Wide Spooky Echo"
"$$$/presets/FftFilter/CMajorTriad=C Major Triad"
"$$$/presets/FftFilter/CassetteTape=Cassette Tape Frequency Response"
"$$$/presets/FftFilter/DeEsser=De-Esser"
"$$$/presets/FftFilter/Kill50Hz=Kill The 50 Hz Ground Loop (Europe)"
"$$$/presets/FftFilter/Kill60Hz=Kill The 60 Hz Ground Loop (US)"
"$$$/presets/FftFilter/KillMicRumble=Kill The Mic Rumble"
"$$$/presets/FftFilter/KillTheSubharmonics=Kill The Subharmonics"
"$$$/presets/FftFilter/LPDeEmphasisCurve=LP De-Emphasis Curve"
"$$$/presets/FftFilter/Mastering_GentleAndNarrow=Mastering - Gentle and Narrow"
"$$$/presets/FftFilter/Mastering_GentleAndWide=Mastering - Gentle and Wide"
"$$$/presets/FftFilter/Mastering_HeavyAndNarrow=Mastering - Heavy and Narrow"
"$$$/presets/FftFilter/Mastering_HeavyAndWide=Mastering - Heavy and Wide"
"$$$/presets/FftFilter/MattsOffice=The Sound From The Office Of Matt"
"$$$/presets/FftFilter/OnHold400_4k=On Hold 400-4k"
"$$$/presets/FftFilter/OnHoldEQ=On Hold EQ"
"$$$/presets/FftFilter/OnlyTheSubwoofer=Only The Subwoofer"
"$$$/presets/FftFilter/OnlyTheTweeter=Only The Tweeter"
"$$$/presets/FftFilter/RapVocals=Rap Vocals"
"$$$/presets/FftFilter/TelephoneReceiver=Telephone - Receiver"
"$$$/presets/FftFilter/TelephoneVoiceMail=Telephone - Voice Mail"
"$$$/presets/FftFilter/TheClubDownstairs=The Club Downstairs"
"$$$/presets/FftFilter/UnderwaterDeep=Underwater - Deep"
"$$$/presets/FftFilter/UnderwaterShallow=Underwater - Shallow"
"$$$/presets/GraphicPhaseShifter/180DegreeFlipAt1KHz=180 Degree Flip at 1kHz"
"$$$/presets/GraphicPhaseShifter/90DegreeShiftBelow100Hz=90 Degree Shift Below 100Hz"
"$$$/presets/GraphicPhaseShifter/LinearShiftOver360Degrees=Linear Shift Over 360 Degrees"
"$$$/presets/GraphicPhaseShifter/MessWithThePhase=Mess with the Phase"
"$$$/presets/GraphicPhaseShifter/Minus90Degrees=-90 Degrees"
"$$$/presets/GraphicPhaseShifter/MonoToStereo=Mono to Stereo"
"$$$/presets/GraphicPhaseShifter/PhaseCancelTheLowEnd=Phase Cancel the Low End (160 Hz)"
"$$$/presets/GraphicPhaseShifter/Plus90Degrees=+90 Degrees"
"$$$/presets/GraphicPhaseShifter/StereoWidener=Stereo Widener from a Mono Source"
"$$$/presets/GraphicPhaseShifter/SuperWidener=Super Widener (From Mono Source)"
"$$$/presets/MarkAudio/IgnoreShortSentences=Ignore Short Sentences"
"$$$/presets/MarkAudio/MarkNonSilentAreas=Mark Non-Silent Areas"
"$$$/presets/MarkAudio/MarkTheSpeech=Mark the Speech"
"$$$/riff_list_info_schema/property_description/archivalLocation=表明文件主题的档案位置。"
"$$$/riff_list_info_schema/property_description/commissioned=列出文件主题委托的个人或组织名称。例如, \"Domenico Guardasoni\""
"$$$/riff_list_info_schema/property_description/name=文件主题的存储标题，诸如, \"Seattle From Above\""
"$$$/riff_list_info_schema/property_description/product=文件原来使用的指定名称，诸如 \"La clemenza di Tito\""
"$$$/riff_list_info_schema/property_description/source=标示提供原始文件主题的个人或组织名称。例如, \"Macromedia.\""
"$$$/riff_list_info_schema/property_description/technician=标示主题文件数字化的技术人员。例如, \"Galt, John.\""
"$$$/riff_list_info_schema/property_name/archivalLocation=档案位置 (IARL)"
"$$$/riff_list_info_schema/property_name/commissioned=委托 (ICMS)"
"$$$/riff_list_info_schema/property_name/name=名称 (INAM)"
"$$$/riff_list_info_schema/property_name/product=产品 (IPRD)"
"$$$/riff_list_info_schema/property_name/source=来源 (ISRC)"
"$$$/riff_list_info_schema/property_name/technician=技术员 (ITCH)"
"$$$/riff_list_info_schema/schema_description/riffinfo=RIFF 信息"
"$$$/riff_list_info_schema/schema_label/riffinfo=RIFF 信息"
"$$$/ui/PrefsDialog/AudioChannelMappingPrefsPage/Name=音频声道映射"
"$$$/ui/PrefsDialog/UserInterfacePrefsPage/Name=外观"
"$$$/uis/Help/ErrorMsgTitle=@APPNAME"
"$$$/uis/Help/HelpBrowserLaunchError=在试图启动您的默认网页浏览器查看帮助内容时出错。请检查您的默认网页浏览器设置。"
"$$$/uis/Help/HelpCallingError=无法显示此帮助主题（错误: @0）。您可能需要修复此安装。"
"$$$/uis/Help/HelpPageNotFound=找不到请求的帮助主题。"
"$$$/uit/ColorField/QuestionMark=?"
"$$$/uit/EveCompressorExpanderList/Infinite=无限"
"$$$/uit/EveCompressorExpanderList/Ratio=比率"
"$$$/uit/EveCompressorExpanderList/Segment=分段"
"$$$/uit/EveCompressorExpanderList/Threshold=阈值"
"$$$/uit/EveCompressorExpanderList/ThresholdAbove=在上"
"$$$/uit/EveCompressorExpanderList/ThresholdBelow=在下"
"$$$/uit/EveCompressorExpanderList/Type=类型"
"$$$/uit/EveCompressorExpanderList/TypeCompressor=压缩"
"$$$/uit/EveCompressorExpanderList/TypeExpander=扩展"
"$$$/uit/EveCompressorExpanderList/TypeNeutral=中性"
"$$$/uit/UI_EditNumber/FaderSliderThumb/Zero=零"
"$$$/uit/UI_RulerGridBase/ZoomIn=放大"
"$$$/uit/UI_RulerGridBase/ZoomOut=缩小"
"$$$/uit/UI_RulerGridBase/ZoomOutFull=全部缩小"
"$$$/uit/controls/UI_Histogram/DB=dB"
"$$$/uit/controls/UI_NoNoiseGraph/DB=dB"
"$$$/uit/controls/UI_NoNoiseGraph/Hz=Hz"
"$$$/uit/curveeditor/CannotEditPoint=无法编辑节点"
"$$$/uit/curveeditor/CannotInvert=无法反转"
"$$$/uit/curveeditor/ContextMenu/DeletePoint=删除节点"
"$$$/uit/curveeditor/ContextMenu/EditPoint=编辑节点..."
"$$$/uit/curveeditor/EditPointDialog=编辑节点"
"$$$/uit/curveeditor/NotInvertable=当前曲线图不能反转"
"$$$/uit/curveeditor/PointAlreadyExists=一个节点在所请求位置已存在。"
"$$$/uit/curveeditor/WrongStartEndPoints=结束点必须在 -100,-100 和 0,0"
"$$$/uit/utility/FileInfoUtils/FileSizeUnitsBytes= bytes"
"$$$/uit/utility/FileInfoUtils/FileSizeUnitsGB=GB"
"$$$/uit/utility/FileInfoUtils/FileSizeUnitsKB=KB"
"$$$/uit/utility/FileInfoUtils/FileSizeUnitsMB=MB"
"$$$AuUI/ClipStretchPropertiesSection/StretchOff=关闭"
"$$$AuUI/ClipStretchPropertiesSection/StretchRealtime=(实时)"
"$$$AuUI/ClipStretchPropertiesSection/StretchRendered=(渲染)"
